search..
No manual entry for -- in section 8
VGSCAN(8)		    System Manager's Manual		      VGSCAN(8)

NAME
       vgscan -- Search for all volume groups

SYNOPSIS
       vgscan
	   [ option_args ]

DESCRIPTION
       vgscan scans all supported LVM block devices in the system for VGs.

USAGE
       vgscan
	   [	--ignorelockingfailure ]
	   [	--mknodes ]
	   [	--notifydbus ]
	   [	--refresh ]
	   [	--reportformat basic|json|json_std ]
	   [ COMMON_OPTIONS ]

       Common options for lvm:
	   [ -d|--debug ]
	   [ -h|--help ]
	   [ -q|--quiet ]
	   [ -t|--test ]
	   [ -v|--verbose ]
	   [ -y|--yes ]
	   [	--commandprofile String ]
	   [	--config String ]
	   [	--devices PV ]
	   [	--devicesfile String ]
	   [	--driverloaded y|n ]
	   [	--journal String ]
	   [	--lockopt String ]
	   [	--longhelp ]
	   [	--nohints ]
	   [	--nolocking ]
	   [	--profile String ]
	   [	--version ]

OPTIONS

       --commandprofile String
	      The  command  profile  to	 use  for  command  configuration.  See
	      lvm.conf(5) for more information about profiles.

       --config String
	      Config settings for the command. These override lvm.conf(5)  set-
	      tings.   The  String  arg uses the same format as lvm.conf(5), or
	      may use section/field syntax.  See lvm.conf(5) for more  informa-
	      tion about config.

       -d|--debug ...
	      Set  debug level. Repeat from 1 to 6 times to increase the detail
	      of messages sent to the log file and/or syslog (if configured).

       --devices PV
	      Restricts the devices that are visible and accessible to the com-
	      mand.  Devices not listed will appear to be missing. This	 option
	      can  be  repeated,  or accepts a comma separated list of devices.
	      This overrides the devices file.

       --devicesfile String
	      A file listing devices that LVM should use.  The file must  exist
	      in  /etc/lvm/devices/  and is managed with the lvmdevices(8) com-
	      mand.  This overrides the lvm.conf(5) devices/devicesfile and de-
	      vices/use_devicesfile settings.

       --driverloaded y|n
	      If set to no, the command will not attempt to use	 device-mapper.
	      For testing and debugging.

       -h|--help
	      Display help text.

       --ignorelockingfailure
	      Allows  a	 command to continue with read-only metadata operations
	      after locking failures.

       --journal String
	      Record information in the systemd journal.  This	information  is
	      in  addition  to	information enabled by the lvm.conf log/journal
	      setting.	command: record information about the command.	output:
	      record the default command output.  debug:  record  full	command
	      debugging.

       --lockopt String
	      Used  to	pass  options  for special cases to lvmlockd.  See lvm-
	      lockd(8) for more information.

       --longhelp
	      Display long help text.

       --mknodes
	      Also checks the LVM special files in /dev that are needed for ac-
	      tive LVs and creates any missing ones and	 removes  unused  ones.
	      See also additional --refresh option for use in udev environment.

       --nohints
	      Do  not  use  the hints file to locate devices for PVs. A command
	      may read more devices to find PVs when hints are	not  used.  The
	      command  will still perform standard hint file invalidation where
	      appropriate.

       --nolocking
	      Disable locking. Use with caution, concurrent commands  may  pro-
	      duce incorrect results.

       --notifydbus
	      Send a notification to D-Bus. The command will exit with an error
	      if  LVM  is  not built with support for D-Bus notification, or if
	      the notify_dbus config setting is disabled.

       --profile String
	      An alias for --commandprofile or --metadataprofile, depending  on
	      the command.

       -q|--quiet ...
	      Suppress	output	and  log messages. Overrides --debug and --ver-
	      bose.  Repeat once to also suppress any prompts with answer 'no'.

       --refresh
	      If the LV is active, reload  its	metadata.   In	an  environment
	      where  udev is used to manage the /dev content, usage of this op-
	      tion is highly recommended. This is because refresh also regener-
	      ates udev events for an LV based on which existing udev rules are
	      applied to set the /dev content and permissions.	Also, this  op-
	      eration  may  be	useful	if something has gone wrong, or if some
	      form of manual LV sharing is being used.

       --reportformat basic|json|json_std
	      Overrides current output format  for  reports  which  is	defined
	      globally by the report/output_format setting in lvm.conf(5).  ba-
	      sic  is  the  original format with columns and rows.  If there is
	      more than one report per command, each report  is	 prefixed  with
	      the  report  name for identification. json produces report output
	      in JSON format. json_std produces report output  in  JSON	 format
	      which is more compliant with JSON standard.  See lvmreport(7) for
	      more information.

       -t|--test
	      Run in test mode. Commands will not update metadata.  This is im-
	      plemented	 by disabling all metadata writing but nevertheless re-
	      turning success to the calling function. This may lead to unusual
	      error messages in multi-stage operations	if  a  tool  relies  on
	      reading back metadata it believes has changed but hasn't.

       -v|--verbose ...
	      Set  verbose  level. Repeat from 1 to 4 times to increase the de-
	      tail of messages sent to stdout and stderr.

       --version
	      Display version information.

       -y|--yes
	      Do not prompt for confirmation interactively  but	 always	 assume
	      the answer yes. Use with extreme caution.	 (For automatic no, see
	      -qq.)

VARIABLES
       String See  the option description for information about the string con-
	      tent.

       Size[UNIT]
	      Size is an input number that accepts  an	optional  unit.	  Input
	      units  are always treated as base two values, regardless of capi-
	      talization, e.g. 'k' and 'K' both refer to 1024.	The default in-
	      put unit is specified by letter, followed by |UNIT.  UNIT	 repre-
	      sents other possible input units: b|B is bytes, s|S is sectors of
	      512 bytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is
	      PiB,  e|E	 is  EiB.  (This should not be confused with the output
	      control --units, where capital letters mean multiple of 1000.)

ENVIRONMENT VARIABLES
       See lvm(8) for information about environment variables used by lvm.  For
       example, LVM_VG_NAME can generally be substituted for a required VG  pa-
       rameter.

SEE ALSO
       lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),

       pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8),
       pvresize(8), pvs(8), pvscan(8),

       vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8),
       vgconvert(8), vgdisplay(8), vgexport(8), vgextend(8), vgimport(8),
       vgimportclone(8), vgimportdevices(8), vgmerge(8), vgmknodes(8),
       vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8),

       lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8),
       lvreduce(8), lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8),

       lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),

       dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8),
       lvmdbusd(8), fsadm(8),

       lvmsystemid(7), lvmreport(7), lvmcache(7), lvmraid(7), lvmthin(7),
       lvmvdo(7), lvmautoactivation(7)

Red Hat, Inc.	       LVM TOOLS 2.03.31(2) (2025-02-27)	      VGSCAN(8)