search..
No manual entry for -- in section 8
VGMERGE(8)		    System Manager's Manual		     VGMERGE(8)

NAME
       vgmerge -- Merge volume groups

SYNOPSIS
       vgmerge position_args
	   [ option_args ]

DESCRIPTION
       vgmerge	merges	two existing VGs. The inactive source VG is merged into
       the destination VG if physical extent sizes are equal and PV and LV sum-
       maries of both VGs fit into the destination VG's limits.

USAGE
       vgmerge VG VG
	   [ -A|--autobackup y|n ]
	   [ -l|--list ]
	   [	--poolmetadataspare y|n ]
	   [ COMMON_OPTIONS ]

       Common options for lvm:
	   [ -d|--debug ]
	   [ -h|--help ]
	   [ -q|--quiet ]
	   [ -t|--test ]
	   [ -v|--verbose ]
	   [ -y|--yes ]
	   [	--commandprofile String ]
	   [	--config String ]
	   [	--devices PV ]
	   [	--devicesfile String ]
	   [	--driverloaded y|n ]
	   [	--journal String ]
	   [	--lockopt String ]
	   [	--longhelp ]
	   [	--nohints ]
	   [	--nolocking ]
	   [	--profile String ]
	   [	--version ]

OPTIONS

       -A|--autobackup y|n
	      Specifies if metadata should be backed up automatically  after  a
	      change.	Enabling  this is strongly advised!  See vgcfgbackup(8)
	      for more information.

       --commandprofile String
	      The command  profile  to	use  for  command  configuration.   See
	      lvm.conf(5) for more information about profiles.

       --config String
	      Config  settings for the command. These override lvm.conf(5) set-
	      tings.  The String arg uses the same format  as  lvm.conf(5),  or
	      may  use section/field syntax.  See lvm.conf(5) for more informa-
	      tion about config.

       -d|--debug ...
	      Set debug level. Repeat from 1 to 6 times to increase the	 detail
	      of messages sent to the log file and/or syslog (if configured).

       --devices PV
	      Restricts the devices that are visible and accessible to the com-
	      mand.   Devices not listed will appear to be missing. This option
	      can be repeated, or accepts a comma separated  list  of  devices.
	      This overrides the devices file.

       --devicesfile String
	      A	 file listing devices that LVM should use.  The file must exist
	      in /etc/lvm/devices/ and is managed with the  lvmdevices(8)  com-
	      mand.  This overrides the lvm.conf(5) devices/devicesfile and de-
	      vices/use_devicesfile settings.

       --driverloaded y|n
	      If  set to no, the command will not attempt to use device-mapper.
	      For testing and debugging.

       -h|--help
	      Display help text.

       --journal String
	      Record information in the systemd journal.  This	information  is
	      in  addition  to	information enabled by the lvm.conf log/journal
	      setting.	command: record information about the command.	output:
	      record the default command output.  debug:  record  full	command
	      debugging.

       -l|--list
	      Display merged destination VG like vgdisplay -v.

       --lockopt String
	      Used  to	pass  options  for special cases to lvmlockd.  See lvm-
	      lockd(8) for more information.

       --longhelp
	      Display long help text.

       --nohints
	      Do not use the hints file to locate devices for  PVs.  A	command
	      may  read	 more  devices to find PVs when hints are not used. The
	      command will still perform standard hint file invalidation  where
	      appropriate.

       --nolocking
	      Disable  locking.	 Use with caution, concurrent commands may pro-
	      duce incorrect results.

       --poolmetadataspare y|n
	      Enable or disable the automatic  creation	 and  management  of  a
	      spare pool metadata LV in the VG. A spare metadata LV is reserved
	      space that can be used when repairing a pool.

       --profile String
	      An  alias for --commandprofile or --metadataprofile, depending on
	      the command.

       -q|--quiet ...
	      Suppress output and log messages. Overrides  --debug  and	 --ver-
	      bose.  Repeat once to also suppress any prompts with answer 'no'.

       -t|--test
	      Run in test mode. Commands will not update metadata.  This is im-
	      plemented	 by disabling all metadata writing but nevertheless re-
	      turning success to the calling function. This may lead to unusual
	      error messages in multi-stage operations	if  a  tool  relies  on
	      reading back metadata it believes has changed but hasn't.

       -v|--verbose ...
	      Set  verbose  level. Repeat from 1 to 4 times to increase the de-
	      tail of messages sent to stdout and stderr.

       --version
	      Display version information.

       -y|--yes
	      Do not prompt for confirmation interactively  but	 always	 assume
	      the answer yes. Use with extreme caution.	 (For automatic no, see
	      -qq.)

VARIABLES
       VG     Volume Group name.  See lvm(8) for valid names.

       String See  the option description for information about the string con-
	      tent.

       Size[UNIT]
	      Size is an input number that accepts  an	optional  unit.	  Input
	      units  are always treated as base two values, regardless of capi-
	      talization, e.g. 'k' and 'K' both refer to 1024.	The default in-
	      put unit is specified by letter, followed by |UNIT.  UNIT	 repre-
	      sents other possible input units: b|B is bytes, s|S is sectors of
	      512 bytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is
	      PiB,  e|E	 is  EiB.  (This should not be confused with the output
	      control --units, where capital letters mean multiple of 1000.)

ENVIRONMENT VARIABLES
       See lvm(8) for information about environment variables used by lvm.  For
       example, LVM_VG_NAME can generally be substituted for a required VG  pa-
       rameter.

EXAMPLES
       Merge  an  inactive VG named "vg00" into the active or inactive VG named
       "databases", giving verbose runtime information.
       vgmerge -v databases vg00

SEE ALSO
       lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),

       pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8),
       pvresize(8), pvs(8), pvscan(8),

       vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8),
       vgconvert(8), vgdisplay(8), vgexport(8), vgextend(8), vgimport(8),
       vgimportclone(8), vgimportdevices(8), vgmerge(8), vgmknodes(8),
       vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8),

       lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8),
       lvreduce(8), lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8),

       lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),

       dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8),
       lvmdbusd(8), fsadm(8),

       lvmsystemid(7), lvmreport(7), lvmcache(7), lvmraid(7), lvmthin(7),
       lvmvdo(7), lvmautoactivation(7)

Red Hat, Inc.	       LVM TOOLS 2.03.31(2) (2025-02-27)	     VGMERGE(8)