search..
No manual entry for -- in section 8
VGEXTEND(8)		    System Manager's Manual		    VGEXTEND(8)

NAME
       vgextend -- Add physical volumes to a volume group

SYNOPSIS
       vgextend position_args
	   [ option_args ]

DESCRIPTION
       vgextend	 adds  one or more PVs to a VG. This increases the space avail-
       able for LVs in the VG.

       Also, PVs that have gone missing and then returned, e.g. due to a  tran-
       sient  device failure, can be added back to the VG without re-initializ-
       ing them (see --restoremissing).

       If the specified PVs have not yet been initialized with pvcreate,  vgex-
       tend  will  initialize  them. In this case pvcreate options can be used,
       e.g.   --labelsector,  --metadatasize,  --metadataignore,  --pvmetadata-
       copies, --dataalignment, --dataalignmentoffset.

USAGE
       vgextend VG PV ...
	   [ -A|--autobackup y|n ]
	   [ -f|--force ]
	   [ -Z|--zero y|n ]
	   [ -M|--metadatatype lvm2 ]
	   [	--labelsector Number ]
	   [	--metadatasize Size[m|UNIT] ]
	   [	--pvmetadatacopies 0|1|2 ]
	   [	--metadataignore y|n ]
	   [	--dataalignment Size[k|UNIT] ]
	   [	--dataalignmentoffset Size[k|UNIT] ]
	   [	--reportformat basic|json|json_std ]
	   [	--restoremissing ]
	   [ COMMON_OPTIONS ]

       Common options for lvm:
	   [ -d|--debug ]
	   [ -h|--help ]
	   [ -q|--quiet ]
	   [ -t|--test ]
	   [ -v|--verbose ]
	   [ -y|--yes ]
	   [	--commandprofile String ]
	   [	--config String ]
	   [	--devices PV ]
	   [	--devicesfile String ]
	   [	--driverloaded y|n ]
	   [	--journal String ]
	   [	--lockopt String ]
	   [	--longhelp ]
	   [	--nohints ]
	   [	--nolocking ]
	   [	--profile String ]
	   [	--version ]

OPTIONS

       -A|--autobackup y|n
	      Specifies	 if  metadata should be backed up automatically after a
	      change.  Enabling this is strongly advised!   See	 vgcfgbackup(8)
	      for more information.

       --commandprofile String
	      The  command  profile  to	 use  for  command  configuration.  See
	      lvm.conf(5) for more information about profiles.

       --config String
	      Config settings for the command. These override lvm.conf(5)  set-
	      tings.   The  String  arg uses the same format as lvm.conf(5), or
	      may use section/field syntax.  See lvm.conf(5) for more  informa-
	      tion about config.

       --dataalignment Size[k|UNIT]
	      Align the start of a PV data area with a multiple of this number.
	      To  see  the location of the first Physical Extent (PE) of an ex-
	      isting PV, use pvs -o +pe_start. In addition, it may  be	shifted
	      by  an alignment offset, see --dataalignmentoffset.  Also specify
	      an appropriate PE size when creating a VG.

       --dataalignmentoffset Size[k|UNIT]
	      Shift the start of the PV data area by this additional offset.

       -d|--debug ...
	      Set debug level. Repeat from 1 to 6 times to increase the	 detail
	      of messages sent to the log file and/or syslog (if configured).

       --devices PV
	      Restricts the devices that are visible and accessible to the com-
	      mand.   Devices not listed will appear to be missing. This option
	      can be repeated, or accepts a comma separated  list  of  devices.
	      This overrides the devices file.

       --devicesfile String
	      A	 file listing devices that LVM should use.  The file must exist
	      in /etc/lvm/devices/ and is managed with the  lvmdevices(8)  com-
	      mand.  This overrides the lvm.conf(5) devices/devicesfile and de-
	      vices/use_devicesfile settings.

       --driverloaded y|n
	      If  set to no, the command will not attempt to use device-mapper.
	      For testing and debugging.

       -f|--force ...
	      Override various checks, confirmations and protections.  Use with
	      extreme caution.

       -h|--help
	      Display help text.

       --journal String
	      Record information in the systemd journal.  This	information  is
	      in  addition  to	information enabled by the lvm.conf log/journal
	      setting.	command: record information about the command.	output:
	      record the default command output.  debug:  record  full	command
	      debugging.

       --labelsector Number
	      By default the PV is labelled with an LVM2 identifier in its sec-
	      ond  sector (sector 1). This lets you use a different sector near
	      the start of the disk (between  0	 and  3	 inclusive  -  see  LA-
	      BEL_SCAN_SECTORS in the source). Use with care.

       --lockopt String
	      Used  to	pass  options  for special cases to lvmlockd.  See lvm-
	      lockd(8) for more information.

       --longhelp
	      Display long help text.

       --metadataignore y|n
	      Specifies the metadataignore property of a PV.  If yes,  metadata
	      areas  on	 the PV are ignored, and lvm will not store metadata in
	      the metadata areas of the PV.  If no, lvm will store metadata  on
	      the PV.

       --metadatasize Size[m|UNIT]
	      The  approximate	amount of space used for each VG metadata area.
	      The size may be rounded.

       -M|--metadatatype lvm2
	      Specifies the type of on-disk metadata to use.  lvm2 (or just  2)
	      is  the  current, standard format.  lvm1 (or just 1) is no longer
	      used.

       --nohints
	      Do not use the hints file to locate devices for  PVs.  A	command
	      may  read	 more  devices to find PVs when hints are not used. The
	      command will still perform standard hint file invalidation  where
	      appropriate.

       --nolocking
	      Disable  locking.	 Use with caution, concurrent commands may pro-
	      duce incorrect results.

       --profile String
	      An alias for --commandprofile or --metadataprofile, depending  on
	      the command.

       --pvmetadatacopies 0|1|2
	      The  number of metadata areas to set aside on a PV for storing VG
	      metadata.	 When 2, one copy of the VG metadata is stored	at  the
	      front  of the PV and a second copy is stored at the end.	When 1,
	      one copy of the VG metadata is stored at the  front  of  the  PV.
	      When  0, no copies of the VG metadata are stored on the given PV.
	      This may be useful in VGs containing many PVs (this places  limi-
	      tations on the ability to use vgsplit later.)

       -q|--quiet ...
	      Suppress	output	and  log messages. Overrides --debug and --ver-
	      bose.  Repeat once to also suppress any prompts with answer 'no'.

       --reportformat basic|json|json_std
	      Overrides current output format  for  reports  which  is	defined
	      globally by the report/output_format setting in lvm.conf(5).  ba-
	      sic  is  the  original format with columns and rows.  If there is
	      more than one report per command, each report  is	 prefixed  with
	      the  report  name for identification. json produces report output
	      in JSON format. json_std produces report output  in  JSON	 format
	      which is more compliant with JSON standard.  See lvmreport(7) for
	      more information.

       --restoremissing
	      Add  a  PV  back	into a VG after the PV was missing and then re-
	      turned, e.g. due to a transient failure. The PV is not reinitial-
	      ized.

       -t|--test
	      Run in test mode. Commands will not update metadata.  This is im-
	      plemented by disabling all metadata writing but nevertheless  re-
	      turning success to the calling function. This may lead to unusual
	      error  messages  in  multi-stage	operations  if a tool relies on
	      reading back metadata it believes has changed but hasn't.

       -v|--verbose ...
	      Set verbose level. Repeat from 1 to 4 times to increase  the  de-
	      tail of messages sent to stdout and stderr.

       --version
	      Display version information.

       -y|--yes
	      Do  not  prompt  for confirmation interactively but always assume
	      the answer yes. Use with extreme caution.	 (For automatic no, see
	      -qq.)

       -Z|--zero y|n
	      Controls if the first 4 sectors (2048 bytes) of  the  device  are
	      wiped.   The  default  is	 to wipe these sectors unless either or
	      both of --restorefile or --uuid are specified.

VARIABLES
       VG     Volume Group name.  See lvm(8) for valid names.

       PV     Physical Volume name, a device path  under  /dev.	  For  commands
	      managing	physical extents, a PV positional arg generally accepts
	      a suffix indicating a range (or multiple ranges) of physical  ex-
	      tents  (PEs).  When  the	first PE is omitted, it defaults to the
	      start of the device, and when the last PE is omitted it  defaults
	      to  end.	 Start	and end range (inclusive): PV[:PE-PE]...  Start
	      and length range (counting from 0): PV[:PE+PE]...

       String See the option description for information about the string  con-
	      tent.

       Size[UNIT]
	      Size  is	an  input  number that accepts an optional unit.  Input
	      units are always treated as base two values, regardless of  capi-
	      talization, e.g. 'k' and 'K' both refer to 1024.	The default in-
	      put  unit is specified by letter, followed by |UNIT.  UNIT repre-
	      sents other possible input units: b|B is bytes, s|S is sectors of
	      512 bytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is
	      PiB, e|E is EiB.	(This should not be confused  with  the	 output
	      control --units, where capital letters mean multiple of 1000.)

ENVIRONMENT VARIABLES
       See lvm(8) for information about environment variables used by lvm.  For
       example,	 LVM_VG_NAME can generally be substituted for a required VG pa-
       rameter.

EXAMPLES
       Add two PVs to a VG.
       vgextend vg00 /dev/sda4 /dev/sdn1

SEE ALSO
       lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),

       pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8),
       pvresize(8), pvs(8), pvscan(8),

       vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8),
       vgconvert(8), vgdisplay(8), vgexport(8), vgextend(8), vgimport(8),
       vgimportclone(8), vgimportdevices(8), vgmerge(8), vgmknodes(8),
       vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8),

       lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8),
       lvreduce(8), lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8),

       lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),

       dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8),
       lvmdbusd(8), fsadm(8),

       lvmsystemid(7), lvmreport(7), lvmcache(7), lvmraid(7), lvmthin(7),
       lvmvdo(7), lvmautoactivation(7)

Red Hat, Inc.	       LVM TOOLS 2.03.31(2) (2025-02-27)	    VGEXTEND(8)