search..
No manual entry for -- in section 8
VGCONVERT(8)		    System Manager's Manual		   VGCONVERT(8)

NAME
       vgconvert -- Change volume group metadata format

SYNOPSIS
       vgconvert position_args
	   [ option_args ]

DESCRIPTION
       vgconvert is no longer a part of LVM.  It was removed along with support
       for  the	 LVM1  format.	Use an older version of LVM to convert VGs from
       the LVM1 format to LVM2.

USAGE
       vgconvert VG ...
	   [ -f|--force ]
	   [ -M|--metadatatype lvm2 ]
	   [	--labelsector Number ]
	   [	--bootloaderareasize Size[m|UNIT] ]
	   [	--pvmetadatacopies 0|1|2 ]
	   [	--metadatasize Size[m|UNIT] ]
	   [	--reportformat basic|json|json_std ]
	   [ COMMON_OPTIONS ]

       Common options for lvm:
	   [ -d|--debug ]
	   [ -h|--help ]
	   [ -q|--quiet ]
	   [ -t|--test ]
	   [ -v|--verbose ]
	   [ -y|--yes ]
	   [	--commandprofile String ]
	   [	--config String ]
	   [	--devices PV ]
	   [	--devicesfile String ]
	   [	--driverloaded y|n ]
	   [	--journal String ]
	   [	--lockopt String ]
	   [	--longhelp ]
	   [	--nohints ]
	   [	--nolocking ]
	   [	--profile String ]
	   [	--version ]

OPTIONS

       --bootloaderareasize Size[m|UNIT]
	      Reserve space for the bootloader between the  LVM	 metadata  area
	      and  the first PE.  The bootloader area is reserved for bootload-
	      ers to embed their own data or metadata; LVM  will  not  use  it.
	      The  bootloader area begins where the first PE would otherwise be
	      located.	The first PE is moved out by the size of the bootloader
	      area, and then moved out further if necessary to match  the  data
	      alignment.   The	start of the bootloader area is always aligned,
	      see also --dataalignment	and  --dataalignmentoffset.  The  boot-
	      loader  area  may	 be larger than requested due to the alignment,
	      but it's never less than the requested size.  To	see  the  boot-
	      loader  area  start  and	size  of  an  existing	PV  use	 pvs -o
	      +pv_ba_start,pv_ba_size.

       --commandprofile String
	      The command  profile  to	use  for  command  configuration.   See
	      lvm.conf(5) for more information about profiles.

       --config String
	      Config  settings for the command. These override lvm.conf(5) set-
	      tings.  The String arg uses the same format  as  lvm.conf(5),  or
	      may  use section/field syntax.  See lvm.conf(5) for more informa-
	      tion about config.

       -d|--debug ...
	      Set debug level. Repeat from 1 to 6 times to increase the	 detail
	      of messages sent to the log file and/or syslog (if configured).

       --devices PV
	      Restricts the devices that are visible and accessible to the com-
	      mand.   Devices not listed will appear to be missing. This option
	      can be repeated, or accepts a comma separated  list  of  devices.
	      This overrides the devices file.

       --devicesfile String
	      A	 file listing devices that LVM should use.  The file must exist
	      in /etc/lvm/devices/ and is managed with the  lvmdevices(8)  com-
	      mand.  This overrides the lvm.conf(5) devices/devicesfile and de-
	      vices/use_devicesfile settings.

       --driverloaded y|n
	      If  set to no, the command will not attempt to use device-mapper.
	      For testing and debugging.

       -f|--force ...
	      Override various checks, confirmations and protections.  Use with
	      extreme caution.

       -h|--help
	      Display help text.

       --journal String
	      Record information in the systemd journal.  This	information  is
	      in  addition  to	information enabled by the lvm.conf log/journal
	      setting.	command: record information about the command.	output:
	      record the default command output.  debug:  record  full	command
	      debugging.

       --labelsector Number
	      By default the PV is labelled with an LVM2 identifier in its sec-
	      ond  sector (sector 1). This lets you use a different sector near
	      the start of the disk (between  0	 and  3	 inclusive  -  see  LA-
	      BEL_SCAN_SECTORS in the source). Use with care.

       --lockopt String
	      Used  to	pass  options  for special cases to lvmlockd.  See lvm-
	      lockd(8) for more information.

       --longhelp
	      Display long help text.

       --metadatasize Size[m|UNIT]
	      The approximate amount of space used for each VG	metadata  area.
	      The size may be rounded.

       -M|--metadatatype lvm2
	      Specifies	 the type of on-disk metadata to use.  lvm2 (or just 2)
	      is the current, standard format.	lvm1 (or just 1) is  no	 longer
	      used.

       --nohints
	      Do  not  use  the hints file to locate devices for PVs. A command
	      may read more devices to find PVs when hints are	not  used.  The
	      command  will still perform standard hint file invalidation where
	      appropriate.

       --nolocking
	      Disable locking. Use with caution, concurrent commands  may  pro-
	      duce incorrect results.

       --profile String
	      An  alias for --commandprofile or --metadataprofile, depending on
	      the command.

       --pvmetadatacopies 0|1|2
	      The number of metadata areas to set aside on a PV for storing  VG
	      metadata.	  When	2, one copy of the VG metadata is stored at the
	      front of the PV and a second copy is stored at the end.  When  1,
	      one  copy	 of  the  VG metadata is stored at the front of the PV.
	      When 0, no copies of the VG metadata are stored on the given  PV.
	      This  may be useful in VGs containing many PVs (this places limi-
	      tations on the ability to use vgsplit later.)

       -q|--quiet ...
	      Suppress output and log messages. Overrides  --debug  and	 --ver-
	      bose.  Repeat once to also suppress any prompts with answer 'no'.

       --reportformat basic|json|json_std
	      Overrides	 current  output  format  for  reports which is defined
	      globally by the report/output_format setting in lvm.conf(5).  ba-
	      sic is the original format with columns and rows.	  If  there  is
	      more  than  one  report per command, each report is prefixed with
	      the report name for identification. json produces	 report	 output
	      in  JSON	format.	 json_std produces report output in JSON format
	      which is more compliant with JSON standard.  See lvmreport(7) for
	      more information.

       -t|--test
	      Run in test mode. Commands will not update metadata.  This is im-
	      plemented by disabling all metadata writing but nevertheless  re-
	      turning success to the calling function. This may lead to unusual
	      error  messages  in  multi-stage	operations  if a tool relies on
	      reading back metadata it believes has changed but hasn't.

       -v|--verbose ...
	      Set verbose level. Repeat from 1 to 4 times to increase  the  de-
	      tail of messages sent to stdout and stderr.

       --version
	      Display version information.

       -y|--yes
	      Do  not  prompt  for confirmation interactively but always assume
	      the answer yes. Use with extreme caution.	 (For automatic no, see
	      -qq.)

VARIABLES
       VG     Volume Group name.  See lvm(8) for valid names.

       String See the option description for information about the string  con-
	      tent.

       Size[UNIT]
	      Size  is	an  input  number that accepts an optional unit.  Input
	      units are always treated as base two values, regardless of  capi-
	      talization, e.g. 'k' and 'K' both refer to 1024.	The default in-
	      put  unit is specified by letter, followed by |UNIT.  UNIT repre-
	      sents other possible input units: b|B is bytes, s|S is sectors of
	      512 bytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is
	      PiB, e|E is EiB.	(This should not be confused  with  the	 output
	      control --units, where capital letters mean multiple of 1000.)

ENVIRONMENT VARIABLES
       See lvm(8) for information about environment variables used by lvm.  For
       example,	 LVM_VG_NAME can generally be substituted for a required VG pa-
       rameter.

SEE ALSO
       lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),

       pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8),
       pvresize(8), pvs(8), pvscan(8),

       vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8),
       vgconvert(8), vgdisplay(8), vgexport(8), vgextend(8), vgimport(8),
       vgimportclone(8), vgimportdevices(8), vgmerge(8), vgmknodes(8),
       vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8),

       lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8),
       lvreduce(8), lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8),

       lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),

       dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8),
       lvmdbusd(8), fsadm(8),

       lvmsystemid(7), lvmreport(7), lvmcache(7), lvmraid(7), lvmthin(7),
       lvmvdo(7), lvmautoactivation(7)

Red Hat, Inc.	       LVM TOOLS 2.03.31(2) (2025-02-27)	   VGCONVERT(8)