search..
No manual entry for -- in section 8
TUNE2FS(8)		    System Manager's Manual		     TUNE2FS(8)

NAME
       tune2fs	-  adjust tunable file system parameters on ext2/ext3/ext4 file
       systems

SYNOPSIS
       tune2fs [ -l ] [ -c max-mount-counts ] [ -e errors-behavior ] [ -f  ]  [
       -i  interval-between-checks ] [ -I new_inode_size ] [ -j ] [ -J journal-
       options ] [ -m reserved-blocks-percentage ] [ -o	 [^]mount-options[,...]
       ] [ -r reserved-blocks-count ] [ -u user ] [ -g group ] [ -C mount-count
       ]  [  -E extended-options ] [ -L volume-label ] [ -M last-mounted-direc-
       tory ] [ -O [^]feature[,...]  ] [ -Q quota-options  ]  [	 -T  time-last-
       checked ] [ -U UUID ] [ -z undo_file ] device

DESCRIPTION
       tune2fs	allows	the system administrator to adjust various tunable file
       system parameters on Linux ext2, ext3, or ext4 file systems.   The  cur-
       rent  values of these options can be displayed by using the -l option to
       tune2fs(8) program, or by using the dumpe2fs(8) program.

       The device specifier can either be a filename (i.e.,  /dev/sda1),  or  a
       LABEL  or  UUID	specifier: "LABEL=volume-label" or "UUID=uuid".	 (i.e.,
       LABEL=home or UUID=e40486c6-84d5-4f2f-b99c-032281799c9d).

OPTIONS
       -c max-mount-counts
	      Adjust the number of mounts after which the file system  will  be
	      checked  by  e2fsck(8).	If max-mount-counts is the string "ran-
	      dom", tune2fs will use a random value between 20 and 40.	If max-
	      mount-counts is 0 or -1, the number of times the file  system  is
	      mounted will be disregarded by e2fsck(8) and the kernel.

	      Staggering  the  mount-counts  at which file systems are forcibly
	      checked will avoid all file systems being	 checked  at  one  time
	      when using journaled file systems.

	      Mount-count-dependent  checking  is  disabled by default to avoid
	      unanticipated long reboots while e2fsck does its	work.	If  you
	      are  concerned  about file system corruptions caused by potential
	      hardware problems of kernel bugs, a better solution  than	 mount-
	      count-dependent  checking is to use the e2scrub(8) program.  This
	      does require placing the file system on an LVM volume, however.

       -C mount-count
	      Set the number of times the file system has been mounted.	 If set
	      to a greater value than the max-mount-counts parameter set by the
	      -c option, e2fsck(8) will check the file system at the  next  re-
	      boot.

       -e error-behavior
	      Change  the behavior of the kernel code when errors are detected.
	      In all cases, a file system error will cause e2fsck(8)  to  check
	      the  file	 system on the next boot.  error-behavior can be one of
	      the following:

		   continue    Continue normal execution.

		   remount-ro  Remount file system read-only.

		   panic       Cause a kernel panic.

       -E extended-options
	      Set extended options for the file system.	 Extended  options  are
	      comma  separated, and may take an argument using the equals ('=')
	      sign.  The following extended options are supported:

		   clear_mmp
			  Reset the MMP block (if any) back to the clean state.
			  Use only if absolutely certain the device is not cur-
			  rently mounted or being fscked, or major file	 system
			  corruption can result.  Needs '-f'.

		   encoding=encoding-name
			  Enable  the  casefold	 feature in the super block and
			  set encoding-name as the encoding to be used.	 If en-
			  coding-name is not specified, utf8 is used.  The  en-
			  coding  cannot  be altered if casefold was previously
			  enabled.

		   encoding_flags=encoding-flags
			  Define parameters for file  name  character  encoding
			  operations.	If a flag is not changed using this pa-
			  rameter, its default value is	 used.	 encoding-flags
			  should  be a comma-separated lists of flags to be en-
			  abled.  The flags cannot be altered if  casefold  was
			  previously enabled.

			  The  only  flag  that	 can be set right now is strict
			  which means that invalid strings should  be  rejected
			  by  the  file	 system.  In the default configuration,
			  the strict flag is disabled.

		   force_fsck
			  Set a flag in the file system	 superblock  indicating
			  that errors have been found.	This will force fsck to
			  run at the next mount.

		   hash_alg=hash-alg
			  Set  the default hash algorithm used for file systems
			  with hashed b-tree directories.  Valid algorithms ac-
			  cepted are: legacy, half_md4, and tea.

		   mmp_update_interval=interval
			  Adjust the initial MMP update	 interval  to  interval
			  seconds.   Specifying	 an  interval of 0 means to use
			  the default interval.	 The specified interval must be
			  less than 300 seconds.  Requires that the mmp feature
			  be enabled.

		   mount_opts=mount_option_string
			  Set a set of default mount options which will be used
			  when the file system is mounted.  Unlike the bitmask-
			  based default mount options which  can  be  specified
			  with	the  -o option, mount_option_string is an arbi-
			  trary string with a maximum length of 63 bytes, which
			  is stored in the superblock.

			  The ext4 file system driver will first apply the bit-
			  mask-based  default  options,	 and  then  parse   the
			  mount_option_string, before parsing the mount options
			  passed from the mount(8) program.

			  This	superblock  setting  is only honored in 2.6.35+
			  kernels; and not at all by the  ext2	and  ext3  file
			  system drivers.

		   orphan_file_size=size
			  Set  size of the file for tracking unlinked but still
			  open inodes and inodes  with	truncate  in  progress.
			  Larger  file allows for better scalability, reserving
			  a few blocks per cpu is ideal.

		   stride=stride-size
			  Configure the file  system  for  a  RAID  array  with
			  stride-size file system blocks. This is the number of
			  blocks  read or written to disk before moving to next
			  disk. This mostly affects placement  of  file	 system
			  metadata  like  bitmaps  at  mke2fs(2)  time to avoid
			  placing them on a single disk,  which	 can  hurt  the
			  performance.	It may also be used by block allocator.

		   stripe_width=stripe-width
			  Configure  the  file	system	for  a	RAID array with
			  stripe-width file system blocks per stripe.  This  is
			  typically  be	 stride-size * N, where N is the number
			  of data disks in the RAID (e.g. RAID 5  N+1,	RAID  6
			  N+2).	  This	allows	the  block allocator to prevent
			  read-modify-write of the parity in a RAID  stripe  if
			  possible when the data is written.

		   test_fs
			  Set  a  flag in the file system superblock indicating
			  that it may  be  mounted  using  experimental	 kernel
			  code, such as the ext4dev file system.

		   ^test_fs
			  Clear	 the  test_fs  flag, indicating the file system
			  should only be mounted  using	 production-level  file
			  system code.

       -f     Force  the  tune2fs operation to complete even in the face of er-
	      rors.  This option is useful when removing the  has_journal  file
	      system  feature  from a file system which has an external journal
	      (or is corrupted such that it appears to have an	external  jour-
	      nal),  but  that external journal is not available.   If the file
	      system appears to require journal replay, the  -f	 flag  must  be
	      specified twice to proceed.

	      WARNING:	Removing  an  external journal from a file system which
	      was not cleanly unmounted without first  replaying  the  external
	      journal  can  result  in severe data loss and file system corrup-
	      tion.

       -g group
	      Set the group which can use the reserved file system blocks.  The
	      group parameter can be a numerical gid or a  group  name.	  If  a
	      group name is given, it is converted to a numerical gid before it
	      is stored in the superblock.

       -i  interval-between-checks[d|m|w]
	      Adjust  the maximal time between two file system checks.	No suf-
	      fix or d will interpret  the  number  interval-between-checks  as
	      days,  m as months, and w as weeks.  A value of zero will disable
	      the time-dependent checking.

	      There are pros and cons to disabling these periodic  checks;  see
	      the  discussion under the -c (mount-count-dependent check) option
	      for details.

       -I     Change the inode size used by the file  system.	 This  requires
	      rewriting the inode table, so it requires that the file system is
	      checked  for  consistency	 first using e2fsck(8).	 This operation
	      can also take a while and the file system can  be	 corrupted  and
	      data  lost if it is interrupted while in the middle of converting
	      the file system.	Backing up the file system before changing  in-
	      ode size is recommended.

	      File systems with an inode size of 128 bytes do not support time-
	      stamps  beyond  January  19, 2038.  Inodes which are 256 bytes or
	      larger will support extended timestamps, project	id's,  and  the
	      ability  to store some extended attributes in the inode table for
	      improved performance.

       -j     Add an ext3 journal to the file system.  If the -J option is  not
	      specified,  the default journal parameters will be used to create
	      an appropriately sized journal (given the size of the  file  sys-
	      tem)  stored within the file system.  Note that you must be using
	      a kernel which has ext3 support in order to actually make use  of
	      the journal.

	      If this option is used to create a journal on a mounted file sys-
	      tem,  an	immutable  file,  .journal, will be created in the top-
	      level directory of the file system, as it is the only safe way to
	      create the journal inode while the file system is mounted.  While
	      the ext3 journal is visible, it is not safe to delete it, or mod-
	      ify it while the file system is mounted; for this reason the file
	      is marked immutable.   While  checking  unmounted	 file  systems,
	      e2fsck(8)	 will  automatically move .journal files to the invisi-
	      ble, reserved journal inode.  For all file systems except for the
	      root file system,	 this should happen automatically and naturally
	      during the next reboot cycle.  Since  the	 root  file  system  is
	      mounted  read-only, e2fsck(8) must be run from a rescue floppy in
	      order to effect this transition.

	      On some distributions, such as Debian, if an initial  ramdisk  is
	      used,  the initrd scripts will automatically convert an ext2 root
	      file system to ext3 if the /etc/fstab  file  specifies  the  ext3
	      file  system for the root file system in order to avoid requiring
	      the use of a rescue floppy to add an ext3	 journal  to  the  root
	      file system.

       -J journal-options
	      Override the default ext3 journal parameters. Journal options are
	      comma  separated, and may take an argument using the equals ('=')
	      sign.  The following journal options are supported:

		   device=external-journal
			  Attach the file system to the	 journal  block	 device
			  located  on  external-journal.   The external journal
			  must have been already created using the command

			  mke2fs -O journal_dev external-journal

			  Note that external-journal must be formatted with the
			  same block size as file systems which will  be  using
			  it.	In addition, while there is support for attach-
			  ing multiple file systems to a single external  jour-
			  nal,	the Linux kernel and e2fsck(8) do not currently
			  support shared external journals yet.

			  Instead of specifying a device name directly,	 exter-
			  nal-journal can also be specified by either LABEL=la-
			  bel  or  UUID=UUID  to locate the external journal by
			  either the volume label or UUID stored  in  the  ext2
			  superblock   at   the	 start	of  the	 journal.   Use
			  dumpe2fs(8) to display a journal device's volume  la-
			  bel and UUID.	 See also the -L option of tune2fs(8).

		   fast_commit_size=fast-commit-size
			  Create an additional fast commit journal area of size
			  fast-commit-size  kilobytes.	 This  option  is  only
			  valid if fast_commit feature is enabled on  the  file
			  system.  If  this  option  is	 not  specified	 and if
			  fast_commit feature is turned on,  fast  commit  area
			  size defaults to journal-size / 64 megabytes. The to-
			  tal  size of the journal with fast_commit feature set
			  is  journal-size  +  (   fast-commit-size   *	  1024)
			  megabytes. The total journal size may be no more than
			  10,240,000  file system blocks or half the total file
			  system size (whichever is smaller).

		   location=journal-location
			  Specify the location of the  journal.	  The  argument
			  journal-location  can	 either be specified as a block
			  number, or if the number has a  units	 suffix	 (e.g.,
			  'M',	'G',  etc.) interpret it as the offset from the
			  beginning of the file system.

		   size=journal-size
			  Create a journal stored in the file  system  of  size
			  journal-size	megabytes.    The  size	 of the journal
			  must be at least 1024 file system blocks (i.e., 1 MiB
			  if using 1k blocks, 4 MiB if using 4k	 blocks,  etc.)
			  and  may  be	no  more  than	10,240,000  file system
			  blocks.  There must be enough free space in the  file
			  system to create a journal of that size.

	      Only  one	 of  the size or device options can be given for a file
	      system.

       -l     List the contents of the file system  superblock,	 including  the
	      current  values  of  the parameters that can be set via this pro-
	      gram.

       -L volume-label
	      Set the volume label of the file system.	Ext2 file system labels
	      can be at most 16 characters long; if volume-label is longer than
	      16 characters, tune2fs will truncate it and print a warning.  For
	      other file systems that support online label manipulation and are
	      mounted tune2fs will work as well, but it	 will  not  attempt  to
	      truncate	the  volume-label at all.  The volume label can be used
	      by mount(8), fsck(8), and /etc/fstab(5) (and possibly others)  by
	      specifying  LABEL=volume-label  instead of a block special device
	      name like /dev/hda5.

       -m reserved-blocks-percentage
	      Set the percentage of the file system which may only be allocated
	      by privileged processes.	 Reserving some number of  file	 system
	      blocks for use by privileged processes is done to avoid file sys-
	      tem  fragmentation,  and	to  allow  system daemons, such as sys-
	      logd(8), to continue to function correctly  after	 non-privileged
	      processes	 are  prevented	 from writing to the file system.  Nor-
	      mally, the default percentage of reserved blocks is 5%.

       -M last-mounted-directory
	      Set the last-mounted directory for the file system.

       -o [^]mount-option[,...]
	      Set or clear the indicated default mount options in the file sys-
	      tem.  Default mount options can be overridden  by	 mount	options
	      specified	 either	 in  /etc/fstab(5) or on the command line argu-
	      ments to mount(8).  Older kernels may not support	 this  feature;
	      in particular, kernels which predate 2.4.20 will almost certainly
	      ignore the default mount options field in the superblock.

	      More  than  one  mount option can be cleared or set by separating
	      features with commas.  Mount options prefixed with a caret  char-
	      acter  ('^')  will  be  cleared  in the file system's superblock;
	      mount options without a prefix character or prefixed with a  plus
	      character ('+') will be added to the file system.

	      The following mount options can be set or cleared using tune2fs:

		   debug  Enable debugging code for this file system.

		   bsdgroups
			  Emulate  BSD	behavior  when creating new files: they
			  will take the group-id of the directory in which they
			  were created.	 The standard System V behavior is  the
			  default,  where newly created files take on the fsgid
			  of the current process, unless the directory has  the
			  setgid  bit  set, in which case it takes the gid from
			  the parent directory, and also gets  the  setgid  bit
			  set if it is a directory itself.

		   user_xattr
			  Enable user-specified extended attributes.

		   acl	  Enable Posix Access Control Lists.

		   uid16  Disables  32-bit UIDs and GIDs.  This is for interop-
			  erability with older kernels which only store and ex-
			  pect 16-bit values.

		   journal_data
			  When the file system is mounted with	journaling  en-
			  abled, all data (not just metadata) is committed into
			  the journal prior to being written into the main file
			  system.

		   journal_data_ordered
			  When	the  file system is mounted with journaling en-
			  abled, all data is forced directly out  to  the  main
			  file	system prior to its metadata being committed to
			  the journal.

		   journal_data_writeback
			  When the file system is mounted with	journaling  en-
			  abled,  data may be written into the main file system
			  after its metadata has been committed to the journal.
			  This may increase throughput, however, it  may  allow
			  old data to appear in files after a crash and journal
			  recovery.

		   nobarrier
			  The  file  system will be mounted with barrier opera-
			  tions in the journal disabled.  (This option is  cur-
			  rently  only supported by the ext4 file system driver
			  in 2.6.35+ kernels.)

		   block_validity
			  The file system will be mounted with the block_valid-
			  ity option enabled, which causes extra checks	 to  be
			  performed after reading or writing from the file sys-
			  tem.	 This  prevents	 corrupted metadata blocks from
			  causing file system damage by	 overwriting  parts  of
			  the  inode  table  or	 block group descriptors.  This
			  comes at the cost of increased memory and  CPU  over-
			  head,	 so  it is enabled only for debugging purposes.
			  (This option is currently only supported by the  ext4
			  file system driver in 2.6.35+ kernels.)

		   discard
			  The  file  system  will  be  mounted with the discard
			  mount option.	 This will cause the file system driver
			  to attempt to use the trim/discard  feature  of  some
			  storage  devices  (such as SSD's and thin-provisioned
			  drives available in some enterprise  storage	arrays)
			  to inform the storage device that blocks belonging to
			  deleted  files  can  be  reused  for	other purposes.
			  (This option is currently only supported by the  ext4
			  file system driver in 2.6.35+ kernels.)

		   nodelalloc
			  The  file  system will be mounted with the nodelalloc
			  mount option.	 This will disable the delayed	alloca-
			  tion	feature.   (This  option is currently only sup-
			  ported by the ext4 file system driver in 2.6.35+ ker-
			  nels.)

       -O [^]feature[,...]
	      Set or clear the indicated file system features (options) in  the
	      file system.  More than one file system feature can be cleared or
	      set  by  separating  features  with commas.  File System features
	      prefixed with a caret character ('^') will be cleared in the file
	      system's superblock; file system features without a prefix  char-
	      acter  or	 prefixed  with a plus character ('+') will be added to
	      the file system.	For a detailed description of the  file	 system
	      features, please see the man page ext4(5).

	      The  following  file  system features can be set or cleared using
	      tune2fs:

		   64bit  Enable the file system to be larger than 2^32 blocks.

		   casefold
			  Enable support for  file  system  level  casefolding.
			  The  option  can be cleared only if filesystem has no
			  directories with F attribute.

		   dir_index
			  Use hashed b-trees to speed up lookups for large  di-
			  rectories.

		   dir_nlink
			  Allow more than 65000 subdirectories per directory.

		   ea_inode
			  Allow	 the  value  of	 each  extended attribute to be
			  placed in the data blocks of a separate inode if nec-
			  essary, increasing the limit on the size  and	 number
			  of  extended	attributes per file.  Tune2fs currently
			  only supports setting this file system feature.

		   encrypt
			  Enable support  for  file  system  level  encryption.
			  Tune2fs  currently  only  supports  setting this file
			  system feature.

		   extent Enable the use of extent trees to store the  location
			  of  data  blocks  in	inodes.	 Tune2fs currently only
			  supports setting this file system feature.

		   extra_isize
			  Enable the extended inode fields used by ext4.

		   filetype
			  Store file type information in directory entries.

		   flex_bg
			  Allow bitmaps and inode tables for a block  group  to
			  be  placed  anywhere	on  the storage media.	Tune2fs
			  will not reorganize the location of the inode	 tables
			  and  allocation bitmaps, as mke2fs(8) will do when it
			  creates a freshly formatted file system with	flex_bg
			  enabled.

		   has_journal
			  Use  a journal to ensure file system consistency even
			  across unclean shutdowns.  Setting  the  file	 system
			  feature is equivalent to using the -j option.

		   fast_commit
			  Enable  fast	commit	journaling  feature  to improve
			  fsync latency.

		   large_dir
			  Increase the limit on the number of files per	 direc-
			  tory.	  Tune2fs  currently only supports setting this
			  file system feature.

		   huge_file
			  Support files larger than 2 terabytes in size.

		   large_file
			  File System can contain files that are  greater  than
			  2 GiB.

		   metadata_csum
			  Store	 a  checksum  to  protect  the contents in each
			  metadata block.

		   metadata_csum_seed
			  Allow the file system to store the metadata  checksum
			  seed in the superblock, enabling the administrator to
			  change  the  UUID  of	 a  file system using the meta-
			  data_csum feature while it is mounted.

		   mmp	  Enable or disable  multiple  mount  protection  (MMP)
			  feature.

		   orphan_file
			  Store	 the  list  of orphan inodes in multiple blocks
			  instead of a single linked-list  to  avoid  potential
			  scalability  bottlenecks for workloads that perform a
			  large number of file	truncations  or	 extensions  in
			  parallel.

		   project
			  Enable project ID tracking.  This is used for project
			  quota tracking.

		   quota  Enable internal file system quota inodes.

		   read-only
			  Force the kernel to mount the file system read-only.

		   resize_inode
			  Reserve space so the block group descriptor table may
			  grow	in  the future.	 Tune2fs only supports clearing
			  this file system feature.

		   sparse_super
			  Limit the number of backup superblocks to save  space
			  on  large  file systems.  Tune2fs currently only sup-
			  ports setting this file system feature.

		   stable_inodes
			  Prevent the file system from being shrunk  or	 having
			  its  UUID  changed, in order to allow the use of spe-
			  cialized encryption settings that make use of the in-
			  ode numbers and UUID.	 Tune2fs  currently  only  sup-
			  ports setting this file system feature.

		   uninit_bg
			  Allow	 the kernel to initialize bitmaps and inode ta-
			  bles lazily, and to keep a high watermark for the un-
			  used inodes in a file	 system,  to  reduce  e2fsck(8)
			  time.	  The first e2fsck run after enabling this fea-
			  ture will take the full time, but  subsequent	 e2fsck
			  runs	will take only a fraction of the original time,
			  depending on how full the file system is.

		   verity Enable support for verity protected  files.	Tune2fs
			  currently only supports setting this file system fea-
			  ture.

	      After  setting  or clearing sparse_super, uninit_bg, filetype, or
	      resize_inode file system features, the file  system  may	require
	      being checked using e2fsck(8) to return the file system to a con-
	      sistent  state.  Tune2fs will print a message requesting that the
	      system administrator run e2fsck(8) if necessary.	 After	setting
	      the  dir_index  feature, e2fsck -D can be run to convert existing
	      directories to the hashed B-tree format.	Enabling  certain  file
	      system features may prevent the file system from being mounted by
	      kernels  which do not support those features.  In particular, the
	      uninit_bg and flex_bg features are only  supported  by  the  ext4
	      file system.

       -r reserved-blocks-count
	      Set the number of reserved file system blocks.

       -Q quota-options
	      Sets  'quota'  feature  on  the superblock and works on the quota
	      files for the given quota type. Quota options  could  be	one  or
	      more of the following:

		   [^]usrquota
			  Sets/clears user quota inode in the superblock.

		   [^]grpquota
			  Sets/clears group quota inode in the superblock.

		   [^]prjquota
			  Sets/clears project quota inode in the superblock.

       -T time-last-checked
	      Set  the time the file system was last checked using e2fsck.  The
	      time is interpreted using the current (local) timezone.  This can
	      be useful in scripts which use a Logical Volume Manager to make a
	      consistent snapshot of a file system, and	 then  check  the  file
	      system during off hours to make sure it hasn't been corrupted due
	      to  hardware  problems,  etc.  If the file system was clean, then
	      this option can be used to set the last checked time on the orig-
	      inal file system.	 The format of time-last-checked is the	 inter-
	      national	date  format,  with  an	 optional  time specifier, i.e.
	      YYYYMMDD[HH[MM[SS]]].   The keyword  now	is  also  accepted,  in
	      which case the last checked time will be set to the current time.

       -u user
	      Set  the	user who can use the reserved file system blocks.  user
	      can be a numerical uid or a user name.  If a user name is	 given,
	      it is converted to a numerical uid before it is stored in the su-
	      perblock.

       -U UUID
	      Set  the	universally unique identifier (UUID) of the file system
	      to UUID.	The format of the UUID is a series of hex digits  sepa-
	      rated	      by	  hyphens,	    like	  this:
	      "c1b9d5a2-f162-11cf-9ece-0020afc76f16".  The UUID	 parameter  may
	      also be one of the following:

		   clear  clear the file system UUID

		   random generate a new randomly-generated UUID

		   time	  generate a new time-based UUID

	      The UUID may be used by mount(8), fsck(8), and /etc/fstab(5) (and
	      possibly	others) by specifying UUID=uuid instead of a block spe-
	      cial device name like /dev/hda1.

	      See uuidgen(8) for more information.  If the system does not have
	      a good random number generator such as /dev/random or  /dev/uran-
	      dom,  tune2fs will automatically use a time-based UUID instead of
	      a randomly-generated UUID.

       -z undo_file
	      Before overwriting a file system block, write the old contents of
	      the block to an undo file.  This	undo  file  can	 be  used  with
	      e2undo(8)	 to  restore the old contents of the file system should
	      something go wrong.   If	the  empty  string  is	passed	as  the
	      undo_file argument, the undo file will be written to a file named
	      tune2fs-device.e2undo   in   the	 directory  specified  via  the
	      E2FSPROGS_UNDO_DIR environment variable.

	      WARNING: The undo file cannot be used to recover from a power  or
	      system crash.

BUGS
       We haven't found any bugs yet.  That doesn't mean there aren't any...

AUTHOR
       tune2fs was written by Remy Card <Remy.Card@linux.org>.	It is currently
       being  maintained  by  Theodore Ts'o <tytso@alum.mit.edu>.  tune2fs uses
       the ext2fs library written by Theodore Ts'o <tytso@mit.edu>.  This  man-
       ual  page  was written by Christian Kuhtz <chk@data-hh.Hanse.DE>.  Time-
       dependent checking was added by Uwe Ohse <uwe@tirka.gun.de>.

AVAILABILITY
       tune2fs	is  part  of  the  e2fsprogs  package  and  is	available  from
       http://e2fsprogs.sourceforge.net.

SEE ALSO
       debugfs(8), dumpe2fs(8), e2fsck(8), mke2fs(8), ext4(5)

E2fsprogs version 1.47.2	  January 2025			     TUNE2FS(8)