search..
No manual entry for -- in section 8
Mirror/redirect action in tc(8)	     Linux	Mirror/redirect action in tc(8)

NAME
       mirred - mirror/redirect action

SYNOPSIS
       tc ... action mirred DIRECTION ACTION [ index INDEX ] TARGET

       DIRECTION := { ingress | egress }

       TARGET := { DEV | BLOCK }

       DEV := dev DEVICENAME

       BLOCK := blockid BLOCKID

       ACTION := { mirror | redirect }

DESCRIPTION
       The  mirred  action  allows  packet  mirroring  (copying) or redirecting
       (stealing) the packet it receives. Mirroring is what  is	 sometimes  re-
       ferred to as Switch Port Analyzer (SPAN) and is commonly used to analyze
       and/or  debug  flows.   When mirroring to a tc block, the packet will be
       mirrored to all the ports in the block with exception of the port  where
       the  packet ingressed, if that port is part of the tc block. Redirecting
       is similar to mirroring except that the behaviour is to	mirror	to  the
       first  N	 - 1 ports in the block and redirect to the last one (note that
       the port in which the packet arrived is not  going  to  be  mirrored  or
       redirected to).

OPTIONS
       ingress
       egress Specify  the  direction  in  which the packet shall appear on the
	      destination interface.

       mirror
       redirect
	      Define whether the packet should	be  copied  (mirror)  or  moved
	      (redirect) to the destination interface or block.

       index INDEX
	      Assign  a	 unique ID to this action instead of letting the kernel
	      choose one automatically.	 INDEX	is  a  32bit  unsigned	integer
	      greater than zero.

       dev DEVICENAME
	      Specify the network interface to redirect or mirror to.

       blockid BLOCKID
	      Specify the tc block to redirect or mirror to.

EXAMPLES
       Limit  ingress  bandwidth on eth0 to 1mbit/s, redirect exceeding traffic
       to lo for debugging purposes:

	      # tc qdisc add dev eth0 handle ffff: clsact
	      # tc filter add dev eth0 ingress u32 \
		   match u32 0 0 \
		   action police rate 1mbit burst 100k conform-exceed pipe \
		   action mirred egress redirect dev lo

       Mirror all incoming ICMP packets on eth0 to a dummy interface for exami-
       nation with e.g. tcpdump:

	      # ip link add dummy0 type dummy
	      # ip link set dummy0 up
	      # tc qdisc add dev eth0 handle ffff: clsact
	      # tc filter add dev eth0 ingress protocol ip \
		   u32 match ip protocol 1 0xff \
		   action mirred egress mirror dev dummy0

       Using an ifb interface, it is possible to send ingress  traffic	through
       an instance of sfq:

	      # modprobe ifb
	      # ip link set ifb0 up
	      # tc qdisc add dev ifb0 root sfq
	      # tc qdisc add dev eth0 handle ffff: clsact
	      # tc filter add dev eth0 ingress u32 \
		   match u32 0 0 \
		   action mirred egress redirect dev ifb0

LIMITATIONS
       The kernel restricts nesting to four levels to avoid the chance of nest-
       ing loops.

       Do  not	redirect for one IFB device to another.	 IFB is a very special-
       ized case of packet redirecting	device.	  Redirecting  from  ifbX->ifbY
       will cause all packets to be dropped.

SEE ALSO
       tc(8), tc-u32(8)

iproute2			  11 Jan 2015	Mirror/redirect action in tc(8)