search..
No manual entry for -- in section 8
SMTPD(8)		    System Manager's Manual		       SMTPD(8)

NAME
       smtpd - Postfix SMTP server

SYNOPSIS
       smtpd [generic Postfix daemon options]

       sendmail -bs

DESCRIPTION
       The SMTP server accepts network connection requests and performs zero or
       more  SMTP  transactions per connection.	 Each received message is piped
       through the cleanup(8) daemon, and is placed into the incoming queue  as
       one  single queue file.	For this mode of operation, the program expects
       to be run from the master(8) process manager.

       Alternatively, the SMTP server be can run in stand-alone mode;  this  is
       traditionally  obtained	with "sendmail -bs".  When the SMTP server runs
       stand-alone with non $mail_owner privileges, it receives mail even while
       the mail system is not running,	deposits  messages  directly  into  the
       maildrop	 queue,	 and  disables the SMTP server's access policies. As of
       Postfix version 2.3, the SMTP server refuses to receive	mail  from  the
       network when it runs with non $mail_owner privileges.

       The  SMTP  server  implements  a	 variety of policies for connection re-
       quests, and for parameters given to HELO, ETRN, MAIL FROM, VRFY and RCPT
       TO commands. They are detailed below and in  the	 main.cf  configuration
       file.

SECURITY
       The  SMTP  server  is  moderately  security-sensitive.  It talks to SMTP
       clients and to DNS servers on the network. The SMTP server  can	be  run
       chrooted at fixed low privilege.

STANDARDS
       RFC 821 (SMTP protocol)
       RFC 1123 (Host requirements)
       RFC 1652 (8bit-MIME transport)
       RFC 1869 (SMTP service extensions)
       RFC 1870 (Message size declaration)
       RFC 1985 (ETRN command)
       RFC 2034 (SMTP enhanced status codes)
       RFC 2554 (AUTH command)
       RFC 2821 (SMTP protocol)
       RFC 2920 (SMTP pipelining)
       RFC 3030 (CHUNKING without BINARYMIME)
       RFC 3207 (STARTTLS command)
       RFC 3461 (SMTP DSN extension)
       RFC 3463 (Enhanced status codes)
       RFC 3848 (ESMTP transmission types)
       RFC 4409 (Message submission)
       RFC 4954 (AUTH command)
       RFC 5321 (SMTP protocol)
       RFC 6531 (Internationalized SMTP)
       RFC 6533 (Internationalized Delivery Status Notifications)
       RFC 7505 ("Null MX" No Service Resource Record)

DIAGNOSTICS
       Problems and transactions are logged to syslogd(8) or postlogd(8).

       Depending on the setting of the notify_classes parameter, the postmaster
       is  notified  of	 bounces,  protocol problems, policy violations, and of
       other trouble.

CONFIGURATION PARAMETERS
       Changes to main.cf are picked up automatically,	as  smtpd(8)  processes
       run  for only a limited amount of time. Use the command "postfix reload"
       to speed up a change.

       The text below provides only a parameter summary.  See  postconf(5)  for
       more details including examples.

COMPATIBILITY CONTROLS
       The  following  parameters  work	 around	 implementation errors in other
       software, and/or allow you to override standards in order to prevent un-
       desirable use.

       broken_sasl_auth_clients (no)
	      Enable interoperability with remote SMTP clients	that  implement
	      an obsolete version of the AUTH command (RFC 4954).

       disable_vrfy_command (no)
	      Disable the SMTP VRFY command.

       smtpd_noop_commands (empty)
	      List  of	commands  that	the Postfix SMTP server replies to with
	      "250 Ok", without doing any syntax checks	 and  without  changing
	      state.

       strict_rfc821_envelopes (no)
	      Require  that  addresses	received  in SMTP MAIL FROM and RCPT TO
	      commands are enclosed with <>, and that those  addresses	do  not
	      contain RFC 822 style comments or phrases.

       Available in Postfix version 2.1 and later:

       smtpd_reject_unlisted_sender (no)
	      Request  that  the  Postfix SMTP server rejects mail from unknown
	      sender addresses, even when  no  explicit	 reject_unlisted_sender
	      access restriction is specified.

       smtpd_sasl_exceptions_networks (empty)
	      What  remote  SMTP clients the Postfix SMTP server will not offer
	      AUTH support to.

       Available in Postfix version 2.2 and later:

       smtpd_discard_ehlo_keyword_address_maps (empty)
	      Lookup tables, indexed by the remote SMTP	 client	 address,  with
	      case  insensitive	 lists	of EHLO keywords (pipelining, starttls,
	      auth, etc.) that the Postfix SMTP server will  not  send	in  the
	      EHLO response to a remote SMTP client.

       smtpd_discard_ehlo_keywords (empty)
	      A	 case  insensitive list of EHLO keywords (pipelining, starttls,
	      auth, etc.) that the Postfix SMTP server will  not  send	in  the
	      EHLO response to a remote SMTP client.

       smtpd_delay_open_until_valid_rcpt (yes)
	      Postpone the start of an SMTP mail transaction until a valid RCPT
	      TO command is received.

       Available in Postfix version 2.3 and later:

       smtpd_tls_always_issue_session_ids (yes)
	      Force  the  Postfix  SMTP	 server to issue a TLS session id, even
	      when  TLS	 session  caching   is	 turned	  off	(smtpd_tls_ses-
	      sion_cache_database is empty).

       Available in Postfix version 2.6 and later:

       tcp_windowsize (0)
	      An optional workaround for routers that break TCP window scaling.

       Available in Postfix version 2.7 and later:

       smtpd_command_filter (empty)
	      A mechanism to transform commands from remote SMTP clients.

       Available in Postfix version 2.9 - 3.6:

       smtpd_per_record_deadline (normal: no, overload: yes)
	      Change the behavior of the smtpd_timeout and smtpd_starttls_time-
	      out time limits, from a time limit per read or write system call,
	      to  a  time  limit  to send or receive a complete record (an SMTP
	      command line, SMTP response line, SMTP message content  line,  or
	      TLS protocol message).

       Available in Postfix version 3.0 and later:

       smtpd_dns_reply_filter (empty)
	      Optional filter for Postfix SMTP server DNS lookup results.

       Available in Postfix 3.5 and later:

       info_log_address_format (external)
	      The  email  address  form	 that will be used in non-debug logging
	      (info, warning, etc.).

       Available in Postfix version 3.6 and later:

       smtpd_relay_before_recipient_restrictions (see 'postconf -d' output)
	      Evaluate smtpd_relay_restrictions before smtpd_recipient_restric-
	      tions.

       known_tcp_ports (lmtp=24, smtp=25, smtps=submissions=465, submis-
       sion=587)
	      Optional setting that avoids lookups in the services(5) database.

       Available in Postfix version 3.7 and later:

       smtpd_per_request_deadline (normal: no, overload: yes)
	      Change the behavior of the smtpd_timeout and smtpd_starttls_time-
	      out time limits, from a time limit per plaintext or TLS  read  or
	      write  call,  to	a  combined time limit for receiving a complete
	      SMTP request and for sending a complete SMTP response.

       smtpd_min_data_rate (500)
	      The minimum plaintext data transfer rate in bytes/second for DATA
	      and BDAT requests, when deadlines are enabled with  smtpd_per_re-
	      quest_deadline.

ADDRESS REWRITING CONTROLS
       See  the	 ADDRESS_REWRITING_README document for a detailed discussion of
       Postfix address rewriting.

       receive_override_options (empty)
	      Enable or disable recipient validation, built-in content	filter-
	      ing, or address mapping.

       Available in Postfix version 2.2 and later:

       local_header_rewrite_clients (permit_inet_interfaces)
	      Rewrite or add message headers in mail from these clients, updat-
	      ing  incomplete  addresses  with	the domain name in $myorigin or
	      $mydomain, and adding missing headers.

BEFORE-SMTPD PROXY AGENT
       Available in Postfix version 2.10 and later:

       smtpd_upstream_proxy_protocol (empty)
	      The name of the proxy protocol used by an	 optional  before-smtpd
	      proxy agent.

       smtpd_upstream_proxy_timeout (5s)
	      The  time	 limit	for  the  proxy	 protocol  specified  with  the
	      smtpd_upstream_proxy_protocol parameter.

AFTER QUEUE EXTERNAL CONTENT INSPECTION CONTROLS
       As of version 1.0, Postfix can be configured to send new mail to an  ex-
       ternal  content	filter AFTER the mail is queued. This content filter is
       expected to inject mail back into a (Postfix or other) MTA  for	further
       delivery. See the FILTER_README document for details.

       content_filter (empty)
	      After the message is queued, send the entire message to the spec-
	      ified transport:destination.

BEFORE QUEUE EXTERNAL CONTENT INSPECTION CONTROLS
       As of version 2.1, the Postfix SMTP server can be configured to send in-
       coming  mail  to	 a  real-time  SMTP-based content filter BEFORE mail is
       queued.	This content filter is expected to inject mail back into  Post-
       fix.   See the SMTPD_PROXY_README document for details on how to config-
       ure and operate this feature.

       smtpd_proxy_filter (empty)
	      The hostname and TCP port of the mail filtering proxy server.

       smtpd_proxy_ehlo ($myhostname)
	      How the Postfix SMTP server announces itself to the proxy filter.

       smtpd_proxy_options (empty)
	      List of options that control how the Postfix SMTP server communi-
	      cates with a before-queue content filter.

       smtpd_proxy_timeout (100s)
	      The time limit for connecting to a proxy filter and  for	sending
	      or receiving information.

BEFORE QUEUE MILTER CONTROLS
       As  of version 2.3, Postfix supports the Sendmail version 8 Milter (mail
       filter) protocol. These content filters run outside  Postfix.  They  can
       inspect the SMTP command stream and the message content, and can request
       modifications  before  mail is queued. For details see the MILTER_README
       document.

       smtpd_milters (empty)
	      A list of Milter (mail filter) applications for new mail that ar-
	      rives via the Postfix smtpd(8) server.

       milter_protocol (6)
	      The mail filter protocol version and optional protocol extensions
	      for communication with a Milter application; prior to Postfix 2.6
	      the default protocol is 2.

       milter_default_action (see 'postconf -d milter_default_action' output)
	      The default action when a Milter (mail filter)  response	is  un-
	      available (for example, bad Postfix configuration or Milter fail-
	      ure).

       milter_macro_daemon_name ($myhostname)
	      The  {daemon_name}  macro value for Milter (mail filter) applica-
	      tions.

       milter_macro_v ($mail_name $mail_version)
	      The {v} macro value for Milter (mail filter) applications.

       milter_connect_timeout (30s)
	      The time limit for connecting to a Milter (mail filter)  applica-
	      tion, and for negotiating protocol options.

       milter_command_timeout (30s)
	      The time limit for sending an SMTP command to a Milter (mail fil-
	      ter) application, and for receiving the response.

       milter_content_timeout (300s)
	      The time limit for sending message content to a Milter (mail fil-
	      ter) application, and for receiving the response.

       milter_connect_macros (see 'postconf -d' output)
	      The macros that are sent to Milter (mail filter) applications af-
	      ter completion of an SMTP connection.

       milter_helo_macros (see 'postconf -d' output)
	      The macros that are sent to Milter (mail filter) applications af-
	      ter the SMTP HELO or EHLO command.

       milter_mail_macros (see 'postconf -d' output)
	      The macros that are sent to Milter (mail filter) applications af-
	      ter the SMTP MAIL FROM command.

       milter_rcpt_macros (see 'postconf -d' output)
	      The macros that are sent to Milter (mail filter) applications af-
	      ter the SMTP RCPT TO command.

       milter_data_macros (see 'postconf -d' output)
	      The macros that are sent to version 4 or higher Milter (mail fil-
	      ter) applications after the SMTP DATA command.

       milter_unknown_command_macros (see 'postconf -d' output)
	      The macros that are sent to version 3 or higher Milter (mail fil-
	      ter) applications after an unknown SMTP command.

       milter_end_of_header_macros (see 'postconf -d' output)
	      The macros that are sent to Milter (mail filter) applications af-
	      ter the end of the message header.

       milter_end_of_data_macros (see 'postconf -d' output)
	      The macros that are sent to Milter (mail filter) applications af-
	      ter the message end-of-data.

       Available in Postfix version 3.1 and later:

       milter_macro_defaults (empty)
	      Optional list of name=value pairs that specify default values for
	      arbitrary macros that Postfix may send to Milter applications.

       Available in Postfix version 3.2 and later:

       smtpd_milter_maps (empty)
	      Lookup  tables with Milter settings per remote SMTP client IP ad-
	      dress.

GENERAL CONTENT INSPECTION CONTROLS
       The following parameters are applicable for both built-in  and  external
       content filters.

       Available in Postfix version 2.1 and later:

       receive_override_options (empty)
	      Enable  or disable recipient validation, built-in content filter-
	      ing, or address mapping.

EXTERNAL CONTENT INSPECTION CONTROLS
       The following parameters are applicable for both	 before-queue  and  af-
       ter-queue content filtering.

       Available in Postfix version 2.1 and later:

       smtpd_authorized_xforward_hosts (empty)
	      What remote SMTP clients are allowed to use the XFORWARD feature.

SASL AUTHENTICATION CONTROLS
       Postfix	SASL support (RFC 4954) can be used to authenticate remote SMTP
       clients to the Postfix SMTP server, and to authenticate the Postfix SMTP
       client to a remote SMTP server.	See the SASL_README  document  for  de-
       tails.

       broken_sasl_auth_clients (no)
	      Enable  interoperability	with remote SMTP clients that implement
	      an obsolete version of the AUTH command (RFC 4954).

       smtpd_sasl_auth_enable (no)
	      Enable SASL authentication in the Postfix SMTP server.

       smtpd_sasl_local_domain (empty)
	      The name of the Postfix SMTP server's local  SASL	 authentication
	      realm.

       smtpd_sasl_security_options (noanonymous)
	      Postfix  SMTP server SASL security options; as of Postfix 2.3 the
	      list of available features depends on the SASL server implementa-
	      tion that is selected with smtpd_sasl_type.

       smtpd_sender_login_maps (empty)
	      Optional lookup table with the SASL login names that own the  en-
	      velope sender (MAIL FROM) addresses.

       Available in Postfix version 2.1 and later:

       smtpd_sasl_exceptions_networks (empty)
	      What  remote  SMTP clients the Postfix SMTP server will not offer
	      AUTH support to.

       Available in Postfix version 2.1 and 2.2:

       smtpd_sasl_application_name (smtpd)
	      The application name that the Postfix SMTP server uses  for  SASL
	      server initialization.

       Available in Postfix version 2.3 and later:

       smtpd_sasl_authenticated_header (no)
	      Report  the SASL authenticated user name in the smtpd(8) Received
	      message header.

       smtpd_sasl_path (smtpd)
	      Implementation-specific information that the Postfix SMTP	 server
	      passes  through  to  the	SASL plug-in implementation that is se-
	      lected with smtpd_sasl_type.

       smtpd_sasl_type (cyrus)
	      The SASL plug-in type that the Postfix SMTP server should use for
	      authentication.

       Available in Postfix version 2.5 and later:

       cyrus_sasl_config_path (empty)
	      Search path for Cyrus SASL application configuration files,  cur-
	      rently used only to locate the $smtpd_sasl_path.conf file.

       Available in Postfix version 2.11 and later:

       smtpd_sasl_service (smtp)
	      The  service  name that is passed to the SASL plug-in that is se-
	      lected with smtpd_sasl_type and smtpd_sasl_path.

       Available in Postfix version 3.4 and later:

       smtpd_sasl_response_limit (12288)
	      The maximum length of a SASL client's response to a server  chal-
	      lenge.

       Available in Postfix 3.6 and later:

       smtpd_sasl_mechanism_filter (!external, static:rest)
	      If  non-empty,  a	 filter	 for  the SASL mechanism names that the
	      Postfix SMTP server will announce in the EHLO response.

STARTTLS SUPPORT CONTROLS
       Detailed information about STARTTLS configuration may be	 found	in  the
       TLS_README document.

       smtpd_tls_security_level (empty)
	      The  SMTP	 TLS security level for the Postfix SMTP server; when a
	      non-empty value is specified, this overrides the obsolete parame-
	      ters smtpd_use_tls and smtpd_enforce_tls.

       smtpd_sasl_tls_security_options ($smtpd_sasl_security_options)
	      The SASL authentication security options that  the  Postfix  SMTP
	      server uses for TLS encrypted SMTP sessions.

       smtpd_starttls_timeout (see 'postconf -d' output)
	      The  time limit for Postfix SMTP server write and read operations
	      during TLS startup and shutdown handshake procedures.

       smtpd_tls_CAfile (empty)
	      A file containing	 (PEM  format)	CA  certificates  of  root  CAs
	      trusted  to sign either remote SMTP client certificates or inter-
	      mediate CA certificates.

       smtpd_tls_CApath (empty)
	      A directory containing (PEM format) CA certificates of  root  CAs
	      trusted  to sign either remote SMTP client certificates or inter-
	      mediate CA certificates.

       smtpd_tls_always_issue_session_ids (yes)
	      Force the Postfix SMTP server to issue a	TLS  session  id,  even
	      when   TLS   session   caching   is  turned  off	(smtpd_tls_ses-
	      sion_cache_database is empty).

       smtpd_tls_ask_ccert (no)
	      Ask a remote SMTP client for a client certificate.

       smtpd_tls_auth_only (no)
	      When TLS encryption is optional in the Postfix  SMTP  server,  do
	      not  announce or accept SASL authentication over unencrypted con-
	      nections.

       smtpd_tls_ccert_verifydepth (9)
	      The verification depth for remote SMTP client certificates.

       smtpd_tls_cert_file (empty)
	      File with the Postfix SMTP server RSA certificate in PEM format.

       smtpd_tls_exclude_ciphers (empty)
	      List of ciphers or cipher types to exclude from the  SMTP	 server
	      cipher list at all TLS security levels.

       smtpd_tls_dcert_file (empty)
	      File with the Postfix SMTP server DSA certificate in PEM format.

       smtpd_tls_dh1024_param_file (empty)
	      File  with  DH parameters that the Postfix SMTP server should use
	      with non-export EDH ciphers.

       smtpd_tls_dh512_param_file (empty)
	      File with DH parameters that the Postfix SMTP server  should  use
	      with export-grade EDH ciphers.

       smtpd_tls_dkey_file ($smtpd_tls_dcert_file)
	      File with the Postfix SMTP server DSA private key in PEM format.

       smtpd_tls_key_file ($smtpd_tls_cert_file)
	      File with the Postfix SMTP server RSA private key in PEM format.

       smtpd_tls_loglevel (0)
	      Enable additional Postfix SMTP server logging of TLS activity.

       smtpd_tls_mandatory_ciphers (medium)
	      The  minimum  TLS	 cipher grade that the Postfix SMTP server will
	      use with mandatory TLS encryption.

       smtpd_tls_mandatory_exclude_ciphers (empty)
	      Additional list of ciphers or cipher types to  exclude  from  the
	      Postfix SMTP server cipher list at mandatory TLS security levels.

       smtpd_tls_mandatory_protocols (see 'postconf -d' output)
	      TLS  protocols accepted by the Postfix SMTP server with mandatory
	      TLS encryption.

       smtpd_tls_received_header (no)
	      Request that the Postfix SMTP server produces Received:	message
	      headers  that  include  information about the protocol and cipher
	      used, as well as the remote SMTP	client	CommonName  and	 client
	      certificate issuer CommonName.

       smtpd_tls_req_ccert (no)
	      With  mandatory  TLS  encryption,	 require  a trusted remote SMTP
	      client certificate in order to allow TLS connections to proceed.

       smtpd_tls_wrappermode (no)
	      Run the Postfix SMTP server in TLS "wrapper" mode, instead of us-
	      ing the STARTTLS command.

       tls_daemon_random_bytes (32)
	      The number of pseudo-random bytes that  an  smtp(8)  or  smtpd(8)
	      process  requests	 from the tlsmgr(8) server in order to seed its
	      internal pseudo random number generator (PRNG).

       tls_high_cipherlist (see 'postconf -d' output)
	      The OpenSSL cipherlist for "high" grade ciphers.

       tls_medium_cipherlist (see 'postconf -d' output)
	      The OpenSSL cipherlist for "medium" or higher grade ciphers.

       tls_null_cipherlist (eNULL:!aNULL)
	      The OpenSSL cipherlist for "NULL" grade ciphers that provide  au-
	      thentication without encryption.

       Available in Postfix version 2.3..3.7:

       tls_low_cipherlist (see 'postconf -d' output)
	      The OpenSSL cipherlist for "low" or higher grade ciphers.

       tls_export_cipherlist (see 'postconf -d' output)
	      The OpenSSL cipherlist for "export" or higher grade ciphers.

       Available in Postfix version 2.5 and later:

       smtpd_tls_fingerprint_digest (see 'postconf -d' output)
	      The message digest algorithm to construct remote SMTP client-cer-
	      tificate fingerprints or public key fingerprints (Postfix 2.9 and
	      later) for check_ccert_access and permit_tls_clientcerts.

       Available in Postfix version 2.6 and later:

       smtpd_tls_protocols (see 'postconf -d' output)
	      TLS  protocols  accepted	by  the Postfix SMTP server with oppor-
	      tunistic TLS encryption.

       smtpd_tls_ciphers (medium)
	      The minimum TLS cipher grade that the Postfix  SMTP  server  will
	      use with opportunistic TLS encryption.

       smtpd_tls_eccert_file (empty)
	      File  with  the Postfix SMTP server ECDSA certificate in PEM for-
	      mat.

       smtpd_tls_eckey_file ($smtpd_tls_eccert_file)
	      File with the Postfix SMTP server ECDSA private key in  PEM  for-
	      mat.

       smtpd_tls_eecdh_grade (see 'postconf -d' output)
	      The  Postfix  SMTP  server  security  grade  for ephemeral ellip-
	      tic-curve Diffie-Hellman (EECDH) key exchange.

       tls_eecdh_strong_curve (prime256v1)
	      The elliptic curve used by the Postfix SMTP server  for  sensibly
	      strong ephemeral ECDH key exchange.

       tls_eecdh_ultra_curve (secp384r1)
	      The  elliptic curve used by the Postfix SMTP server for maximally
	      strong ephemeral ECDH key exchange.

       Available in Postfix version 2.8 and later:

       tls_preempt_cipherlist (no)
	      With SSLv3 and later, use the Postfix SMTP server's cipher  pref-
	      erence order instead of the remote client's cipher preference or-
	      der.

       tls_disable_workarounds (see 'postconf -d' output)
	      List or bit-mask of OpenSSL bug work-arounds to disable.

       Available in Postfix version 2.11 and later:

       tlsmgr_service_name (tlsmgr)
	      The name of the tlsmgr(8) service entry in master.cf.

       Available in Postfix version 3.0 and later:

       tls_session_ticket_cipher (Postfix >= 3.0: aes-256-cbc, Postfix < 3.0:
       aes-128-cbc)
	      Algorithm used to encrypt RFC5077 TLS session tickets.

       Available in Postfix version 3.2 and later:

       tls_eecdh_auto_curves (see 'postconf -d' output)
	      The  prioritized	list of elliptic curves, that should be enabled
	      in the Postfix SMTP client and server.

       Available in Postfix version 3.4 and later:

       smtpd_tls_chain_files (empty)
	      List of one or more PEM files, each holding one or  more	private
	      keys directly followed by a corresponding certificate chain.

       tls_server_sni_maps (empty)
	      Optional	lookup	tables that map names received from remote SMTP
	      clients via the TLS Server Name Indication (SNI) extension to the
	      appropriate keys and certificate chains.

       Available in Postfix 3.5, 3.4.6, 3.3.5, 3.2.10, 3.1.13 and later:

       tls_fast_shutdown_enable (yes)
	      A workaround for implementations that hang Postfix while shutting
	      down a TLS session, until Postfix times out.

       Available in Postfix version 3.8 and later:

       tls_ffdhe_auto_groups (see 'postconf -d' output)
	      The prioritized list  of	finite-field  Diffie-Hellman  ephemeral
	      (FFDHE)  key exchange groups supported by the Postfix SMTP client
	      and server.

       Available in Postfix 3.9, 3.8.1, 3.7.6, 3.6.10, 3.5.20 and later:

       tls_config_file (default)
	      Optional configuration file with baseline OpenSSL settings.

       tls_config_name (empty)
	      The application name passed by Postfix to	 OpenSSL  library  ini-
	      tialization functions.

       Available in Postfix version 3.9 and later:

       smtpd_tls_enable_rpk (no)
	      Request  that  remote SMTP clients send an RFC7250 raw public key
	      instead of an X.509 certificate, when  asking  for  or  requiring
	      client authentication.

OBSOLETE STARTTLS CONTROLS
       The  following  configuration  parameters  exist	 for compatibility with
       Postfix versions before 2.3. Support for these will be removed in a  fu-
       ture release.

       smtpd_use_tls (no)
	      Opportunistic  TLS:  announce  STARTTLS  support	to  remote SMTP
	      clients, but do not require that clients use TLS encryption.

       smtpd_enforce_tls (no)
	      Mandatory TLS: announce STARTTLS support to remote SMTP  clients,
	      and  reject  all	plaintext  commands except HELO, EHLO, XCLIENT,
	      STARTTLS, NOOP, QUIT, and (Postfix >= 3.9) HELP.

       smtpd_tls_cipherlist (empty)
	      Obsolete Postfix < 2.3 control for the Postfix  SMTP  server  TLS
	      cipher list.

SMTPUTF8 CONTROLS
       Preliminary SMTPUTF8 support is introduced with Postfix 3.0.

       smtputf8_enable (yes)
	      Enable  preliminary  SMTPUTF8 support for the protocols described
	      in RFC 6531, RFC 6532, and RFC 6533.

       strict_smtputf8 (no)
	      Enable stricter enforcement of the SMTPUTF8 protocol.

       smtputf8_autodetect_classes (sendmail, verify)
	      Detect that a message requires SMTPUTF8 support for the specified
	      mail origin classes.

       Available in Postfix version 3.2 and later:

       enable_idna2003_compatibility (no)
	      Enable  'transitional'   compatibility   between	 IDNA2003   and
	      IDNA2008,	 when  converting  UTF-8 domain names to/from the ASCII
	      form that is used for DNS lookups.

VERP SUPPORT CONTROLS
       With VERP style delivery, each recipient of a message  receives	a  cus-
       tomized	copy  of the message with his/her own recipient address encoded
       in the envelope sender address.	The VERP_README file describes configu-
       ration and operation details of Postfix support	for  variable  envelope
       return  path  addresses.	 VERP style delivery is requested with the SMTP
       XVERP command or with the  "sendmail  -V"  command-line	option	and  is
       available in Postfix version 1.1 and later.

       default_verp_delimiters (+=)
	      The two default VERP delimiter characters.

       verp_delimiter_filter (-=+)
	      The  characters  Postfix	accepts as VERP delimiter characters on
	      the Postfix sendmail(1) command line and in SMTP commands.

       Available in Postfix version 1.1 and 2.0:

       authorized_verp_clients ($mynetworks)
	      What remote SMTP clients are allowed to specify  the  XVERP  com-
	      mand.

       Available in Postfix version 2.1 and later:

       smtpd_authorized_verp_clients ($authorized_verp_clients)
	      What  remote  SMTP  clients are allowed to specify the XVERP com-
	      mand.

TROUBLE SHOOTING CONTROLS
       The DEBUG_README document describes how to debug parts  of  the	Postfix
       mail  system. The methods vary from making the software log a lot of de-
       tail, to running some daemon processes under control of a call tracer or
       debugger.

       debug_peer_level (2)
	      The increment in verbose logging level when  a  nexthop  destina-
	      tion,  remote  client or server name or network address matches a
	      pattern given with the debug_peer_list parameter.

       debug_peer_list (empty)
	      Optional list of nexthop destination,  remote  client  or	 server
	      name or network address patterns that, if matched, cause the ver-
	      bose  logging  level  to increase by the amount specified in $de-
	      bug_peer_level.

       error_notice_recipient (postmaster)
	      The recipient of postmaster  notifications  about	 mail  delivery
	      problems	that are caused by policy, resource, software or proto-
	      col errors.

       internal_mail_filter_classes (empty)
	      What categories of Postfix-generated  mail  are  subject	to  be-
	      fore-queue content inspection by non_smtpd_milters, header_checks
	      and body_checks.

       notify_classes (resource, software)
	      The list of error classes that are reported to the postmaster.

       smtpd_reject_footer (empty)
	      Optional	information  that  is  appended after each Postfix SMTP
	      server 4XX or 5XX response.

       soft_bounce (no)
	      Safety net to keep mail queued that would otherwise  be  returned
	      to the sender.

       Available in Postfix version 2.1 and later:

       smtpd_authorized_xclient_hosts (empty)
	      What remote SMTP clients are allowed to use the XCLIENT feature.

       Available in Postfix version 2.10 and later:

       smtpd_log_access_permit_actions (empty)
	      Enable  logging  of the named "permit" actions in SMTP server ac-
	      cess lists (by default, the SMTP server logs "reject" actions but
	      not "permit" actions).

KNOWN VERSUS UNKNOWN RECIPIENT CONTROLS
       As of Postfix version 2.0, the SMTP server rejects mail for unknown  re-
       cipients.  This prevents the mail queue from clogging up with undeliver-
       able MAILER-DAEMON messages. Additional information on this topic is  in
       the LOCAL_RECIPIENT_README and ADDRESS_CLASS_README documents.

       show_user_unknown_table_name (yes)
	      Display the name of the recipient table in the "User unknown" re-
	      sponses.

       canonical_maps (empty)
	      Optional	address	 mapping  lookup tables for message headers and
	      envelopes.

       recipient_canonical_maps (empty)
	      Optional address mapping lookup tables for  envelope  and	 header
	      recipient addresses.

       sender_canonical_maps (empty)
	      Optional	address	 mapping  lookup tables for envelope and header
	      sender addresses.

       Parameters concerning known/unknown local recipients:

       mydestination ($myhostname, localhost.$mydomain, localhost)
	      The list of domains that are delivered via  the  $local_transport
	      mail delivery transport.

       inet_interfaces (all)
	      The  local  network interface addresses that this mail system re-
	      ceives mail on.

       proxy_interfaces (empty)
	      The remote network interface addresses that this mail system  re-
	      ceives  mail  on by way of a proxy or network address translation
	      unit.

       inet_protocols (see 'postconf -d' output)
	      The Internet protocols Postfix will attempt to use when making or
	      accepting connections.

       local_recipient_maps (proxy:unix:passwd.byname $alias_maps)
	      Lookup tables with all names or addresses of valid local	recipi-
	      ents.

       unknown_local_recipient_reject_code (550)
	      The  numerical Postfix SMTP server response code when a recipient
	      address is local, and $local_recipient_maps specifies a  list  of
	      lookup tables that does not match the recipient.

       Parameters concerning known/unknown recipients of relay destinations:

       relay_domains (Postfix >= 3.0: empty, Postfix < 3.0: $mydestination)
	      What  destination	 domains  (and	subdomains thereof) this system
	      will relay mail to.

       relay_recipient_maps (empty)
	      Optional lookup tables with all valid addresses  in  the	domains
	      that match $relay_domains.

       unknown_relay_recipient_reject_code (550)
	      The numerical Postfix SMTP server reply code when a recipient ad-
	      dress  matches $relay_domains, and relay_recipient_maps specifies
	      a list of lookup tables that does not  match  the	 recipient  ad-
	      dress.

       Parameters concerning known/unknown recipients in virtual alias domains:

       virtual_alias_domains ($virtual_alias_maps)
	      Postfix  is  the final destination for the specified list of vir-
	      tual alias domains, that is, domains for which all addresses  are
	      aliased to addresses in other local or remote domains.

       virtual_alias_maps ($virtual_maps)
	      Optional	lookup tables that are often searched with a full email
	      address (including domain) and that apply to all recipients:  lo-
	      cal(8),  virtual,	 and remote; this is unlike alias_maps that are
	      only searched with an email address  localpart  (no  domain)  and
	      that apply only to local(8) recipients.

       unknown_virtual_alias_reject_code (550)
	      The  Postfix  SMTP  server  reply	 code  when a recipient address
	      matches $virtual_alias_domains, and $virtual_alias_maps specifies
	      a list of lookup tables that does not  match  the	 recipient  ad-
	      dress.

       Parameters  concerning  known/unknown  recipients in virtual mailbox do-
       mains:

       virtual_mailbox_domains ($virtual_mailbox_maps)
	      Postfix is the final destination for the specified  list	of  do-
	      mains; mail is delivered via the $virtual_transport mail delivery
	      transport.

       virtual_mailbox_maps (empty)
	      Optional	lookup	tables	with all valid addresses in the domains
	      that match $virtual_mailbox_domains.

       unknown_virtual_mailbox_reject_code (550)
	      The Postfix SMTP server  reply  code  when  a  recipient	address
	      matches $virtual_mailbox_domains, and $virtual_mailbox_maps spec-
	      ifies  a	list of lookup tables that does not match the recipient
	      address.

RESOURCE AND RATE CONTROLS
       The following parameters limit resource usage by the SMTP server	 and/or
       control client request rates.

       line_length_limit (2048)
	      Upon input, long lines are chopped up into pieces of at most this
	      length; upon delivery, long lines are reconstructed.

       queue_minfree (0)
	      The  minimal amount of free space in bytes in the queue file sys-
	      tem that is needed to receive mail.

       message_size_limit (10240000)
	      The maximal size in bytes of a message, including envelope infor-
	      mation.

       smtpd_recipient_limit (1000)
	      The maximal number of recipients that the Postfix SMTP server ac-
	      cepts per message delivery request.

       smtpd_timeout (normal: 300s, overload: 10s)
	      When the Postfix SMTP server wants to send  an  SMTP  server  re-
	      sponse,  how long the Postfix SMTP server will wait for an under-
	      lying network write operation to complete; and when  the	Postfix
	      SMTP  server Postfix wants to receive an SMTP client request, how
	      long the Postfix SMTP server will wait for an underlying	network
	      read operation to complete.

       smtpd_history_flush_threshold (100)
	      The  maximal  number  of lines in the Postfix SMTP server command
	      history before it is flushed upon receipt of EHLO, RSET,	or  end
	      of DATA.

       Available in Postfix version 2.3 and later:

       smtpd_peername_lookup (yes)
	      Attempt  to  look	 up the remote SMTP client hostname, and verify
	      that the name matches the client IP address.

       The per SMTP client connection count and request rate limits are	 imple-
       mented  in  co-operation with the anvil(8) service, and are available in
       Postfix version 2.2 and later.

       smtpd_client_connection_count_limit (50)
	      How many simultaneous connections any client is allowed  to  make
	      to this service.

       smtpd_client_connection_rate_limit (0)
	      The  maximal  number of connection attempts any client is allowed
	      to make to this service per time unit.

       smtpd_client_message_rate_limit (0)
	      The maximal number of message delivery requests that  any	 client
	      is  allowed  to make to this service per time unit, regardless of
	      whether or not Postfix actually accepts those messages.

       smtpd_client_recipient_rate_limit (0)
	      The maximal number of recipient addresses that any client is  al-
	      lowed  to	 send  to  this	 service  per  time unit, regardless of
	      whether or not Postfix actually accepts those recipients.

       smtpd_client_event_limit_exceptions ($mynetworks)
	      Clients that are	excluded  from	smtpd_client_*_count/rate_limit
	      restrictions.

       Available in Postfix version 2.3 and later:

       smtpd_client_new_tls_session_rate_limit (0)
	      The  maximal  number  of new (i.e., uncached) TLS sessions that a
	      remote SMTP client is allowed to negotiate with this service  per
	      time unit.

       Available in Postfix version 2.9 - 3.6:

       smtpd_per_record_deadline (normal: no, overload: yes)
	      Change the behavior of the smtpd_timeout and smtpd_starttls_time-
	      out time limits, from a time limit per read or write system call,
	      to  a  time  limit  to send or receive a complete record (an SMTP
	      command line, SMTP response line, SMTP message content  line,  or
	      TLS protocol message).

       Available in Postfix version 3.1 and later:

       smtpd_client_auth_rate_limit (0)
	      The maximal number of AUTH commands that any client is allowed to
	      send  to this service per time unit, regardless of whether or not
	      Postfix actually accepts those commands.

       Available in Postfix version 3.7 and later:

       smtpd_per_request_deadline (normal: no, overload: yes)
	      Change the behavior of the smtpd_timeout and smtpd_starttls_time-
	      out time limits, from a time limit per plaintext or TLS  read  or
	      write  call,  to	a  combined time limit for receiving a complete
	      SMTP request and for sending a complete SMTP response.

       smtpd_min_data_rate (500)
	      The minimum plaintext data transfer rate in bytes/second for DATA
	      and BDAT requests, when deadlines are enabled with  smtpd_per_re-
	      quest_deadline.

       header_from_format (standard)
	      The format of the Postfix-generated From: header.

       Available in Postfix version 3.8 and later:

       smtpd_client_ipv4_prefix_length (32)
	      Aggregate smtpd_client_*_count and smtpd_client_*_rate statistics
	      by IPv4 network blocks with the specified network prefix.

       smtpd_client_ipv6_prefix_length (84)
	      Aggregate smtpd_client_*_count and smtpd_client_*_rate statistics
	      by IPv6 network blocks with the specified network prefix.

       Available in Postfix 3.9, 3.8.1, 3.7.6, 3.6.10, 3.5.20 and later:

       smtpd_forbid_unauth_pipelining (Postfix >= 3.9: yes)
	      Disconnect  remote  SMTP	clients that violate RFC 2920 (or 5321)
	      command pipelining constraints.

       Available in Postfix 3.9, 3.8.4, 3.7.9, 3.6.13, 3.5.23 and later:

       smtpd_forbid_bare_newline (Postfix >= 3.9: normalize)
	      Reject or restrict input lines from an SMTP client  that	end  in
	      <LF> instead of the standard <CR><LF>.

       smtpd_forbid_bare_newline_exclusions ($mynetworks)
	      Exclude  the specified clients from smtpd_forbid_bare_newline en-
	      forcement.

       Available in Postfix 3.9, 3.8.5, 3.7.10, 3.6.14, 3.5.24 and later:

       smtpd_forbid_bare_newline_reject_code (550)
	      The numerical Postfix SMTP server response code when rejecting  a
	      request with "smtpd_forbid_bare_newline = reject".

TARPIT CONTROLS
       When  a remote SMTP client makes errors, the Postfix SMTP server can in-
       sert delays before responding. This can help to slow down run-away soft-
       ware.  The behavior is controlled by an error counter  that  counts  the
       number  of errors within an SMTP session that a client makes without de-
       livering mail.

       smtpd_error_sleep_time (1s)
	      With Postfix version 2.1 and later: the SMTP server response  de-
	      lay after a client has made more than $smtpd_soft_error_limit er-
	      rors,  and fewer than $smtpd_hard_error_limit errors, without de-
	      livering mail.

       smtpd_soft_error_limit (10)
	      The number of errors a remote SMTP  client  is  allowed  to  make
	      without delivering mail before the Postfix SMTP server slows down
	      all its responses.

       smtpd_hard_error_limit (normal: 20, overload: 1)
	      The  maximal  number of errors a remote SMTP client is allowed to
	      make without delivering mail.

       smtpd_junk_command_limit (normal: 100, overload: 1)
	      The number of junk commands (NOOP, VRFY, ETRN or RSET) that a re-
	      mote SMTP client can send before the Postfix SMTP	 server	 starts
	      to increment the error counter with each junk command.

       Available in Postfix version 2.1 and later:

       smtpd_recipient_overshoot_limit (1000)
	      The  number  of  recipients that a remote SMTP client can send in
	      excess of the limit specified with $smtpd_recipient_limit, before
	      the Postfix SMTP server increments the  per-session  error  count
	      for each excess recipient.

ACCESS POLICY DELEGATION CONTROLS
       As  of  version 2.1, Postfix can be configured to delegate access policy
       decisions to an external server that runs outside Postfix.  See the file
       SMTPD_POLICY_README for more information.

       smtpd_policy_service_max_idle (300s)
	      The time after which an idle SMTPD policy service	 connection  is
	      closed.

       smtpd_policy_service_max_ttl (1000s)
	      The time after which an active SMTPD policy service connection is
	      closed.

       smtpd_policy_service_timeout (100s)
	      The time limit for connecting to, writing to, or receiving from a
	      delegated SMTPD policy server.

       Available in Postfix version 3.0 and later:

       smtpd_policy_service_default_action (451 4.3.5 Server configuration
       problem)
	      The default action when an SMTPD policy service request fails.

       smtpd_policy_service_request_limit (0)
	      The  maximal  number of requests per SMTPD policy service connec-
	      tion, or zero (no limit).

       smtpd_policy_service_try_limit (2)
	      The maximal number of attempts to send an	 SMTPD	policy	service
	      request before giving up.

       smtpd_policy_service_retry_delay (1s)
	      The  delay  between attempts to resend a failed SMTPD policy ser-
	      vice request.

       Available in Postfix version 3.1 and later:

       smtpd_policy_service_policy_context (empty)
	      Optional information that the Postfix SMTP  server  specifies  in
	      the "policy_context" attribute of a policy service request (orig-
	      inally,  to  share  the  same  service  endpoint	among  multiple
	      check_policy_service clients).

ACCESS CONTROLS
       The SMTPD_ACCESS_README document gives an introduction to all  the  SMTP
       server access control features.

       smtpd_delay_reject (yes)
	      Wait    until    the    RCPT   TO	  command   before   evaluating
	      $smtpd_client_restrictions,     $smtpd_helo_restrictions	    and
	      $smtpd_sender_restrictions, or wait until the ETRN command before
	      evaluating  $smtpd_client_restrictions  and  $smtpd_helo_restric-
	      tions.

       parent_domain_matches_subdomains (see 'postconf -d' output)
	      A list of Postfix features where the pattern  "example.com"  also
	      matches  subdomains  of  example.com, instead of requiring an ex-
	      plicit ".example.com" pattern.

       smtpd_client_restrictions (empty)
	      Optional restrictions that the Postfix SMTP server applies in the
	      context of a client connection request.

       smtpd_helo_required (no)
	      Require that a remote SMTP client introduces itself with the HELO
	      or EHLO command before sending the MAIL command or other commands
	      that require EHLO negotiation.

       smtpd_helo_restrictions (empty)
	      Optional restrictions that the Postfix SMTP server applies in the
	      context of a client HELO command.

       smtpd_sender_restrictions (empty)
	      Optional restrictions that the Postfix SMTP server applies in the
	      context of a client MAIL FROM command.

       smtpd_recipient_restrictions (see 'postconf -d' output)
	      Optional restrictions that the Postfix SMTP server applies in the
	      context of a client RCPT TO command,  after  smtpd_relay_restric-
	      tions.

       smtpd_etrn_restrictions (empty)
	      Optional restrictions that the Postfix SMTP server applies in the
	      context of a client ETRN command.

       allow_untrusted_routing (no)
	      Forward	mail   with   sender-specified	 routing  (user[@%!]re-
	      mote[@%!]site) from untrusted clients  to	 destinations  matching
	      $relay_domains.

       smtpd_restriction_classes (empty)
	      User-defined aliases for groups of access restrictions.

       smtpd_null_access_lookup_key (<>)
	      The lookup key to be used in SMTP access(5) tables instead of the
	      null sender address.

       permit_mx_backup_networks (empty)
	      Restrict	the  use of the permit_mx_backup SMTP access feature to
	      only domains whose primary MX hosts match the listed networks.

       Available in Postfix version 2.0 and later:

       smtpd_data_restrictions (empty)
	      Optional access restrictions that the Postfix SMTP server applies
	      in the context of the SMTP DATA command.

       smtpd_expansion_filter (see 'postconf -d' output)
	      What characters are allowed in $name expansions of RBL reply tem-
	      plates.

       Available in Postfix version 2.1 and later:

       smtpd_reject_unlisted_sender (no)
	      Request that the Postfix SMTP server rejects  mail  from	unknown
	      sender  addresses,  even	when no explicit reject_unlisted_sender
	      access restriction is specified.

       smtpd_reject_unlisted_recipient (yes)
	      Request that the Postfix SMTP server rejects mail for unknown re-
	      cipient addresses, even when no explicit	reject_unlisted_recipi-
	      ent access restriction is specified.

       Available in Postfix version 2.2 and later:

       smtpd_end_of_data_restrictions (empty)
	      Optional access restrictions that the Postfix SMTP server applies
	      in the context of the SMTP END-OF-DATA command.

       Available in Postfix version 2.10 and later:

       smtpd_relay_restrictions (permit_mynetworks, permit_sasl_authenticated,
       defer_unauth_destination)
	      Access  restrictions for mail relay control that the Postfix SMTP
	      server applies in the context of	the  RCPT  TO  command,	 before
	      smtpd_recipient_restrictions.

SENDER AND RECIPIENT ADDRESS VERIFICATION CONTROLS
       Postfix	version	 2.1  introduces sender and recipient address verifica-
       tion.  This feature is implemented by sending probe email messages  that
       are  not	 actually  delivered.	This  feature  is requested via the re-
       ject_unverified_sender and reject_unverified_recipient  access  restric-
       tions.  The status of verification probes is maintained by the verify(8)
       server.	 See the file ADDRESS_VERIFICATION_README for information about
       how to configure and operate the Postfix sender/recipient address  veri-
       fication service.

       address_verify_poll_count (normal: 3, overload: 1)
	      How  many times to query the verify(8) service for the completion
	      of an address verification request in progress.

       address_verify_poll_delay (3s)
	      The delay between queries for the completion of an address  veri-
	      fication request in progress.

       address_verify_sender ($double_bounce_sender)
	      The  sender  address to use in address verification probes; prior
	      to Postfix 2.5 the default was "postmaster".

       unverified_sender_reject_code (450)
	      The numerical Postfix SMTP server response code when a  recipient
	      address is rejected by the reject_unverified_sender restriction.

       unverified_recipient_reject_code (450)
	      The  numerical  Postfix SMTP server response when a recipient ad-
	      dress is rejected by the reject_unverified_recipient restriction.

       Available in Postfix version 2.6 and later:

       unverified_sender_defer_code (450)
	      The numerical Postfix SMTP server response code when a sender ad-
	      dress probe fails due to a temporary error condition.

       unverified_recipient_defer_code (450)
	      The numerical Postfix SMTP server response when a	 recipient  ad-
	      dress probe fails due to a temporary error condition.

       unverified_sender_reject_reason (empty)
	      The  Postfix  SMTP  server's  reply  when rejecting mail with re-
	      ject_unverified_sender.

       unverified_recipient_reject_reason (empty)
	      The Postfix SMTP server's reply  when  rejecting	mail  with  re-
	      ject_unverified_recipient.

       unverified_sender_tempfail_action ($reject_tempfail_action)
	      The  Postfix  SMTP  server's action when reject_unverified_sender
	      fails due to a temporary error condition.

       unverified_recipient_tempfail_action ($reject_tempfail_action)
	      The Postfix SMTP server's action when reject_unverified_recipient
	      fails due to a temporary error condition.

       Available with Postfix 2.9 and later:

       address_verify_sender_ttl (0s)
	      The time between changes in the time-dependent portion of address
	      verification probe sender addresses.

ACCESS CONTROL RESPONSES
       The following parameters control numerical SMTP reply codes and/or  text
       responses.

       access_map_reject_code (554)
	      The  numerical Postfix SMTP server response code for an access(5)
	      map "reject" action.

       defer_code (450)
	      The numerical Postfix SMTP server response  code	when  a	 remote
	      SMTP client request is rejected by the "defer" restriction.

       invalid_hostname_reject_code (501)
	      The  numerical  Postfix SMTP server response code when the client
	      HELO or EHLO command parameter  is  rejected  by	the  reject_in-
	      valid_helo_hostname restriction.

       maps_rbl_reject_code (554)
	      The  numerical  Postfix  SMTP  server response code when a remote
	      SMTP client request is  blocked  by  the	reject_rbl_client,  re-
	      ject_rhsbl_client,	reject_rhsbl_reverse_client,	    re-
	      ject_rhsbl_sender or reject_rhsbl_recipient restriction.

       non_fqdn_reject_code (504)
	      The numerical Postfix SMTP server reply code when	 a  client  re-
	      quest  is	 rejected  by  the  reject_non_fqdn_helo_hostname,  re-
	      ject_non_fqdn_sender or reject_non_fqdn_recipient restriction.

       plaintext_reject_code (450)
	      The numerical Postfix SMTP server response code when a request is
	      rejected by the reject_plaintext_session restriction.

       reject_code (554)
	      The numerical Postfix SMTP server response  code	when  a	 remote
	      SMTP client request is rejected by the "reject" restriction.

       relay_domains_reject_code (554)
	      The numerical Postfix SMTP server response code when a client re-
	      quest  is rejected by the reject_unauth_destination recipient re-
	      striction.

       unknown_address_reject_code (450)
	      The numerical response code when the Postfix SMTP server	rejects
	      a sender or recipient address because its domain is unknown.

       unknown_client_reject_code (450)
	      The  numerical  Postfix  SMTP  server response code when a client
	      without valid address <=> name mapping is	 rejected  by  the  re-
	      ject_unknown_client_hostname restriction.

       unknown_hostname_reject_code (450)
	      The numerical Postfix SMTP server response code when the hostname
	      specified	 with  the  HELO or EHLO command is rejected by the re-
	      ject_unknown_helo_hostname restriction.

       Available in Postfix version 2.0 and later:

       default_rbl_reply (see 'postconf -d' output)
	      The default Postfix SMTP server response template for  a	request
	      that is rejected by an RBL-based restriction.

       multi_recipient_bounce_reject_code (550)
	      The  numerical  Postfix  SMTP  server response code when a remote
	      SMTP  client  request  is	 blocked  by  the  reject_multi_recipi-
	      ent_bounce restriction.

       rbl_reply_maps (empty)
	      Optional lookup tables with RBL or RHSBL response templates.

       Available in Postfix version 2.6 and later:

       access_map_defer_code (450)
	      The  numerical Postfix SMTP server response code for an access(5)
	      map "defer" action, including "defer_if_permit" or  "defer_if_re-
	      ject".

       reject_tempfail_action (defer_if_permit)
	      The  Postfix  SMTP server's action when a reject-type restriction
	      fails due to a temporary error condition.

       unknown_helo_hostname_tempfail_action ($reject_tempfail_action)
	      The Postfix SMTP server's action	when  reject_unknown_helo_host-
	      name fails due to a temporary error condition.

       unknown_address_tempfail_action ($reject_tempfail_action)
	      The  Postfix  SMTP server's action when reject_unknown_sender_do-
	      main or reject_unknown_recipient_domain fail due to  a  temporary
	      error condition.

MISCELLANEOUS CONTROLS
       config_directory (see 'postconf -d' output)
	      The default location of the Postfix main.cf and master.cf config-
	      uration files.

       daemon_timeout (18000s)
	      How  much	 time a Postfix daemon process may take to handle a re-
	      quest before it is terminated by a built-in watchdog timer.

       command_directory (see 'postconf -d' output)
	      The location of all postfix administrative commands.

       double_bounce_sender (double-bounce)
	      The sender address of postmaster notifications that are generated
	      by the mail system.

       ipc_timeout (3600s)
	      The time limit for sending or receiving information over	an  in-
	      ternal communication channel.

       mail_name (Postfix)
	      The  mail	 system name that is displayed in Received: headers, in
	      the SMTP greeting banner, and in bounced mail.

       mail_owner (postfix)
	      The UNIX system account that owns	 the  Postfix  queue  and  most
	      Postfix daemon processes.

       max_idle (100s)
	      The  maximum  amount  of time that an idle Postfix daemon process
	      waits for an incoming connection before terminating voluntarily.

       max_use (100)
	      The maximal number of incoming connections that a Postfix	 daemon
	      process will service before terminating voluntarily.

       myhostname (see 'postconf -d' output)
	      The internet hostname of this mail system.

       mynetworks (see 'postconf -d' output)
	      The  list	 of "trusted" remote SMTP clients that have more privi-
	      leges than "strangers".

       myorigin ($myhostname)
	      The domain name that locally-posted mail appears	to  come  from,
	      and that locally posted mail is delivered to.

       process_id (read-only)
	      The process ID of a Postfix command or daemon process.

       process_name (read-only)
	      The process name of a Postfix command or daemon process.

       queue_directory (see 'postconf -d' output)
	      The location of the Postfix top-level queue directory.

       recipient_delimiter (empty)
	      The  set	of characters that can separate an email address local-
	      part, user name, or a .forward file name from its extension.

       smtpd_banner ($myhostname ESMTP $mail_name)
	      The text that follows the 220 status code in  the	 SMTP  greeting
	      banner.

       syslog_facility (mail)
	      The syslog facility of Postfix logging.

       syslog_name (see 'postconf -d' output)
	      A prefix that is prepended to the process name in syslog records,
	      so that, for example, "smtpd" becomes "prefix/smtpd".

       Available in Postfix version 2.2 and later:

       smtpd_forbidden_commands (CONNECT GET POST regexp:{{/^[^A-Z]/ Bogus}})
	      List  of	commands  that cause the Postfix SMTP server to immedi-
	      ately terminate the session with a 221 code.

       Available in Postfix version 2.5 and later:

       smtpd_client_port_logging (no)
	      Enable logging of the remote SMTP client port in addition to  the
	      hostname and IP address.

       Available in Postfix 3.3 and later:

       service_name (read-only)
	      The master.cf service name of a Postfix daemon process.

       Available in Postfix 3.4 and later:

       smtpd_reject_footer_maps (empty)
	      Lookup tables, indexed by the complete Postfix SMTP server 4xx or
	      5xx response, with reject footer templates.

       Available in Postfix 3.10 and later:

       smtpd_hide_client_session (no)
	      Do  not  include	SMTP  client session information in the Postfix
	      SMTP server's Received: message header.

SEE ALSO
       anvil(8), connection/rate limiting
       cleanup(8), message canonicalization
       tlsmgr(8), TLS session and PRNG management
       trivial-rewrite(8), address resolver
       verify(8), address verification service
       postconf(5), configuration parameters
       master(5), generic daemon options
       master(8), process manager
       postlogd(8), Postfix logging
       syslogd(8), system logging

README FILES
       Use "postconf readme_directory" or "postconf html_directory"  to	 locate
       this information.
       ADDRESS_CLASS_README, blocking unknown hosted or relay recipients
       ADDRESS_REWRITING_README, Postfix address manipulation
       BDAT_README, Postfix CHUNKING support
       FILTER_README, external after-queue content filter
       LOCAL_RECIPIENT_README, blocking unknown local recipients
       MILTER_README, before-queue mail filter applications
       SMTPD_ACCESS_README, built-in access policies
       SMTPD_POLICY_README, external policy server
       SMTPD_PROXY_README, external before-queue content filter
       SASL_README, Postfix SASL howto
       TLS_README, Postfix STARTTLS howto
       VERP_README, Postfix XVERP extension
       XCLIENT_README, Postfix XCLIENT extension
       XFORWARD_README, Postfix XFORWARD extension

LICENSE
       The Secure Mailer license must be distributed with this software.

AUTHOR(S)
       Wietse Venema
       IBM T.J. Watson Research
       P.O. Box 704
       Yorktown Heights, NY 10598, USA

       Wietse Venema
       Google, Inc.
       111 8th Avenue
       New York, NY 10011, USA

       Wietse Venema
       porcupine.org

       SASL support originally by:
       Till Franke
       SuSE Rhein/Main AG
       65760 Eschborn, Germany

       TLS support originally by:
       Lutz Jaenicke
       BTU Cottbus
       Allgemeine Elektrotechnik
       Universitaetsplatz 3-4
       D-03044 Cottbus, Germany

       Revised TLS support by:
       Victor Duchovni
       Morgan Stanley

								       SMTPD(8)