search..
No manual entry for -- in section 8
LVREDUCE(8)		    System Manager's Manual		    LVREDUCE(8)

NAME
       lvreduce -- Reduce the size of a logical volume

SYNOPSIS
       lvreduce option_args position_args
	   [ option_args ]

DESCRIPTION
       lvreduce	 reduces  the  size of an LV. The freed logical extents are re-
       turned to the VG to be used by other LVs. A  copy-on-write  snapshot  LV
       can  also be reduced if less space is needed to hold COW blocks. Use lv-
       convert(8) to change the number of data images in a RAID or mirrored LV.

       Be careful when reducing an LV's size, because data in the reduced  area
       is lost. Ensure that any file system on the LV is resized before running
       lvreduce so that the removed extents are not in use by the file system.

       Sizes  will be rounded if necessary. For example, the LV size must be an
       exact number of extents, and the size of a striped  segment  must  be  a
       multiple of the number of stripes.

       In  the	usage section below, --size Size can be replaced with --extents
       Number.	See both descriptions the options section.

USAGE
       lvreduce -L|--size [-]Size[m|UNIT] LV
	   [ -l|--extents [-]Number[PERCENT] ]
	   [ -A|--autobackup y|n ]
	   [ -f|--force ]
	   [ -n|--nofsck ]
	   [ -r|--resizefs ]
	   [	--noudevsync ]
	   [	--reportformat basic|json|json_std ]
	   [	--fs String ]
	   [	--fsmode String ]
	   [ COMMON_OPTIONS ]

       Common options for lvm:
	   [ -d|--debug ]
	   [ -h|--help ]
	   [ -q|--quiet ]
	   [ -t|--test ]
	   [ -v|--verbose ]
	   [ -y|--yes ]
	   [	--commandprofile String ]
	   [	--config String ]
	   [	--devices PV ]
	   [	--devicesfile String ]
	   [	--driverloaded y|n ]
	   [	--journal String ]
	   [	--lockopt String ]
	   [	--longhelp ]
	   [	--nohints ]
	   [	--nolocking ]
	   [	--profile String ]
	   [	--version ]

OPTIONS

       -A|--autobackup y|n
	      Specifies if metadata should be backed up automatically  after  a
	      change.	Enabling  this is strongly advised!  See vgcfgbackup(8)
	      for more information.

       --commandprofile String
	      The command  profile  to	use  for  command  configuration.   See
	      lvm.conf(5) for more information about profiles.

       --config String
	      Config  settings for the command. These override lvm.conf(5) set-
	      tings.  The String arg uses the same format  as  lvm.conf(5),  or
	      may  use section/field syntax.  See lvm.conf(5) for more informa-
	      tion about config.

       -d|--debug ...
	      Set debug level. Repeat from 1 to 6 times to increase the	 detail
	      of messages sent to the log file and/or syslog (if configured).

       --devices PV
	      Restricts the devices that are visible and accessible to the com-
	      mand.   Devices not listed will appear to be missing. This option
	      can be repeated, or accepts a comma separated  list  of  devices.
	      This overrides the devices file.

       --devicesfile String
	      A	 file listing devices that LVM should use.  The file must exist
	      in /etc/lvm/devices/ and is managed with the  lvmdevices(8)  com-
	      mand.  This overrides the lvm.conf(5) devices/devicesfile and de-
	      vices/use_devicesfile settings.

       --driverloaded y|n
	      If  set to no, the command will not attempt to use device-mapper.
	      For testing and debugging.

       -l|--extents [-]Number[PERCENT]
	      Specifies the new size of the LV in logical extents.  The	 --size
	      and  --extents  options are alternate methods of specifying size.
	      The total number of physical extents used will  be  greater  when
	      redundant	 data  is  needed for RAID levels.  An alternate syntax
	      allows the size to be determined indirectly as  a	 percentage  of
	      the  size	 of a related VG, LV, or set of PVs. The suffix %VG de-
	      notes the total size of the VG, the suffix  %FREE	 the  remaining
	      free  space  in the VG, and the suffix %PVS the free space in the
	      specified PVs.  For a snapshot, the size can be  expressed  as  a
	      percentage  of  the  total  size of the origin LV with the suffix
	      %ORIGIN (100%ORIGIN provides space for the whole	origin).   When
	      expressed	 as  a	percentage, the size defines an upper limit for
	      the number of logical extents in the new LV. The	precise	 number
	      of logical extents in the new LV is not determined until the com-
	      mand  has	 completed.  When the plus + or minus - prefix is used,
	      the value is not an absolute size, but is relative and  added  or
	      subtracted from the current size.

       -f|--force ...
	      Override various checks, confirmations and protections.  Use with
	      extreme caution.

       --fs String
	      Control  file  system  resizing  when resizing an LV.  checksize:
	      Check the fs size and reduce the LV if the fs is	not  using  the
	      reduced  space (fs reduce is not needed.) If the reduced space is
	      used by the fs, then do not resize the fs or LV,	and  return  an
	      error.   (checksize  only applies when reducing, and does nothing
	      for extend.)  resize: Resize the fs by  calling  the  fs-specific
	      resize  command.	 This may also include mounting, unmounting, or
	      running fsck. See --fsmode  to  control  mounting	 behavior,  and
	      --nofsck	to  disable  fsck.  resize_fsadm: Use the old method of
	      calling fsadm to handle the fs (deprecated.) Warning: this option
	      does not prevent lvreduce from destroying file systems  that  are
	      unmounted	 (or  mounted  if prompts are skipped.)	 ignore: Resize
	      the LV without checking for or handling a file system.   Warning:
	      using  ignore when reducing the LV size may destroy the file sys-
	      tem.

       --fsmode String
	      Control file system mounting behavior  for  fs  resize.	manage:
	      Mount  or	 unmount the fs as needed to resize the fs, and attempt
	      to restore the original mount state at the end.  nochange: Do not
	      mount or unmount the fs. If mounting or unmounting is required to
	      resize the fs, then do not resize the fs or the LV and  fail  the
	      command.	 offline:  Unmount  the fs if it is mounted, and resize
	      the fs while it is unmounted. If mounting is required  to	 resize
	      the fs, then do not resize the fs or the LV and fail the command.

       -h|--help
	      Display help text.

       --journal String
	      Record  information  in the systemd journal.  This information is
	      in addition to information enabled by  the  lvm.conf  log/journal
	      setting.	command: record information about the command.	output:
	      record  the  default  command output.  debug: record full command
	      debugging.

       --lockopt String
	      Used to pass options for special cases  to  lvmlockd.   See  lvm-
	      lockd(8) for more information.

       --longhelp
	      Display long help text.

       -n|--nofsck
	      Do  not  perform	fsck  when  resizing the file system with --re-
	      sizefs.

       --nohints
	      Do not use the hints file to locate devices for  PVs.  A	command
	      may  read	 more  devices to find PVs when hints are not used. The
	      command will still perform standard hint file invalidation  where
	      appropriate.

       --nolocking
	      Disable  locking.	 Use with caution, concurrent commands may pro-
	      duce incorrect results.

       --noudevsync
	      Disables udev synchronization. The process will not wait for  no-
	      tification from udev. It will continue irrespective of any possi-
	      ble  udev	 processing in the background. Only use this if udev is
	      not running or has rules that ignore the devices LVM creates.

       --profile String
	      An alias for --commandprofile or --metadataprofile, depending  on
	      the command.

       -q|--quiet ...
	      Suppress	output	and  log messages. Overrides --debug and --ver-
	      bose.  Repeat once to also suppress any prompts with answer 'no'.

       --reportformat basic|json|json_std
	      Overrides current output format  for  reports  which  is	defined
	      globally by the report/output_format setting in lvm.conf(5).  ba-
	      sic  is  the  original format with columns and rows.  If there is
	      more than one report per command, each report  is	 prefixed  with
	      the  report  name for identification. json produces report output
	      in JSON format. json_std produces report output  in  JSON	 format
	      which is more compliant with JSON standard.  See lvmreport(7) for
	      more information.

       -r|--resizefs
	      Resize  the fs using the fs-specific resize command.  May include
	      mounting, unmounting, or running fsck. See  --fsmode  to	control
	      mounting	behavior,  and	--nofsck  to disable fsck. See --fs for
	      more options (--resizefs is equivalent to --fs resize.)

       -L|--size [-]Size[m|UNIT]
	      Specifies the new size of the LV.	 The --size and	 --extents  op-
	      tions are alternate methods of specifying size.  The total number
	      of  physical  extents used will be greater when redundant data is
	      needed for RAID levels.  When the plus + or  minus  -  prefix  is
	      used,  the  value	 is  not  an absolute size, but is relative and
	      added or subtracted from the current size.

       -t|--test
	      Run in test mode. Commands will not update metadata.  This is im-
	      plemented by disabling all metadata writing but nevertheless  re-
	      turning success to the calling function. This may lead to unusual
	      error  messages  in  multi-stage	operations  if a tool relies on
	      reading back metadata it believes has changed but hasn't.

       -v|--verbose ...
	      Set verbose level. Repeat from 1 to 4 times to increase  the  de-
	      tail of messages sent to stdout and stderr.

       --version
	      Display version information.

       -y|--yes
	      Do  not  prompt  for confirmation interactively but always assume
	      the answer yes. Use with extreme caution.	 (For automatic no, see
	      -qq.)

VARIABLES
       LV     Logical Volume name.  See lvm(8) for valid names.	  An  LV  posi-
	      tional  arg  generally  includes	the  VG	 name and LV name, e.g.
	      VG/LV.

       String See the option description for information about the string  con-
	      tent.

       Size[UNIT]
	      Size  is	an  input  number that accepts an optional unit.  Input
	      units are always treated as base two values, regardless of  capi-
	      talization, e.g. 'k' and 'K' both refer to 1024.	The default in-
	      put  unit is specified by letter, followed by |UNIT.  UNIT repre-
	      sents other possible input units: b|B is bytes, s|S is sectors of
	      512 bytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is
	      PiB, e|E is EiB.	(This should not be confused  with  the	 output
	      control --units, where capital letters mean multiple of 1000.)

ENVIRONMENT VARIABLES
       See lvm(8) for information about environment variables used by lvm.  For
       example,	 LVM_VG_NAME can generally be substituted for a required VG pa-
       rameter.

EXAMPLES
       Reduce the size of an LV by 3 logical extents:
       lvreduce -l -3 vg00/lvol1

SEE ALSO
       lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),

       pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8),
       pvresize(8), pvs(8), pvscan(8),

       vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8),
       vgconvert(8), vgdisplay(8), vgexport(8), vgextend(8), vgimport(8),
       vgimportclone(8), vgimportdevices(8), vgmerge(8), vgmknodes(8),
       vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8),

       lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8),
       lvreduce(8), lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8),

       lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),

       dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8),
       lvmdbusd(8), fsadm(8),

       lvmsystemid(7), lvmreport(7), lvmcache(7), lvmraid(7), lvmthin(7),
       lvmvdo(7), lvmautoactivation(7)

Red Hat, Inc.	       LVM TOOLS 2.03.31(2) (2025-02-27)	    LVREDUCE(8)