search..
No manual entry for -- in section 8
LVM(LVPOLL)			 Red Hat, Inc.			    LVM(LVPOLL)

NAME
       lvm  lvpoll  --	Continue  already initiated poll operation on a logical
       volume

SYNOPSIS
       lvm lvpoll option_args position_args
	   [ option_args ]

DESCRIPTION
       lvm lvpoll is an internal command used by  lvmpolld(8)  to  monitor  and
       complete	 lvconvert(8)  and pvmove(8) operations. lvpoll itself does not
       initiate these operations and should not normally need  to  be  run  di-
       rectly.

USAGE
       lvm lvpoll --polloperation pvmove|convert|merge|merge_thin LV ...
	   [ -A|--autobackup y|n ]
	   [ -i|--interval Number ]
	   [	--abort ]
	   [	--handlemissingpvs ]
	   [ COMMON_OPTIONS ]

       Common options for lvm:
	   [ -d|--debug ]
	   [ -h|--help ]
	   [ -q|--quiet ]
	   [ -t|--test ]
	   [ -v|--verbose ]
	   [ -y|--yes ]
	   [	--commandprofile String ]
	   [	--config String ]
	   [	--devices PV ]
	   [	--devicesfile String ]
	   [	--driverloaded y|n ]
	   [	--journal String ]
	   [	--lockopt String ]
	   [	--longhelp ]
	   [	--nohints ]
	   [	--nolocking ]
	   [	--profile String ]
	   [	--version ]

OPTIONS

       --abort
	      Stop processing a poll operation in lvmpolld.

       -A|--autobackup y|n
	      Specifies	 if  metadata should be backed up automatically after a
	      change.  Enabling this is strongly advised!   See	 vgcfgbackup(8)
	      for more information.

       --commandprofile String
	      The  command  profile  to	 use  for  command  configuration.  See
	      lvm.conf(5) for more information about profiles.

       --config String
	      Config settings for the command. These override lvm.conf(5)  set-
	      tings.   The  String  arg uses the same format as lvm.conf(5), or
	      may use section/field syntax.  See lvm.conf(5) for more  informa-
	      tion about config.

       -d|--debug ...
	      Set  debug level. Repeat from 1 to 6 times to increase the detail
	      of messages sent to the log file and/or syslog (if configured).

       --devices PV
	      Restricts the devices that are visible and accessible to the com-
	      mand.  Devices not listed will appear to be missing. This	 option
	      can  be  repeated,  or accepts a comma separated list of devices.
	      This overrides the devices file.

       --devicesfile String
	      A file listing devices that LVM should use.  The file must  exist
	      in  /etc/lvm/devices/  and is managed with the lvmdevices(8) com-
	      mand.  This overrides the lvm.conf(5) devices/devicesfile and de-
	      vices/use_devicesfile settings.

       --driverloaded y|n
	      If set to no, the command will not attempt to use	 device-mapper.
	      For testing and debugging.

       --handlemissingpvs
	      Allows a polling operation to continue when PVs are missing, e.g.
	      for repairs due to faulty devices.

       -h|--help
	      Display help text.

       -i|--interval Number
	      Report progress at regular intervals.

       --journal String
	      Record  information  in the systemd journal.  This information is
	      in addition to information enabled by  the  lvm.conf  log/journal
	      setting.	command: record information about the command.	output:
	      record  the  default  command output.  debug: record full command
	      debugging.

       --lockopt String
	      Used to pass options for special cases  to  lvmlockd.   See  lvm-
	      lockd(8) for more information.

       --longhelp
	      Display long help text.

       --nohints
	      Do  not  use  the hints file to locate devices for PVs. A command
	      may read more devices to find PVs when hints are	not  used.  The
	      command  will still perform standard hint file invalidation where
	      appropriate.

       --nolocking
	      Disable locking. Use with caution, concurrent commands  may  pro-
	      duce incorrect results.

       --polloperation pvmove|convert|merge|merge_thin
	      The command to perform from lvmpolld.

       --profile String
	      An  alias for --commandprofile or --metadataprofile, depending on
	      the command.

       -q|--quiet ...
	      Suppress output and log messages. Overrides  --debug  and	 --ver-
	      bose.  Repeat once to also suppress any prompts with answer 'no'.

       -t|--test
	      Run in test mode. Commands will not update metadata.  This is im-
	      plemented	 by disabling all metadata writing but nevertheless re-
	      turning success to the calling function. This may lead to unusual
	      error messages in multi-stage operations	if  a  tool  relies  on
	      reading back metadata it believes has changed but hasn't.

       -v|--verbose ...
	      Set  verbose  level. Repeat from 1 to 4 times to increase the de-
	      tail of messages sent to stdout and stderr.

       --version
	      Display version information.

       -y|--yes
	      Do not prompt for confirmation interactively  but	 always	 assume
	      the answer yes. Use with extreme caution.	 (For automatic no, see
	      -qq.)

VARIABLES
       LV     Logical  Volume  name.   See lvm(8) for valid names.  An LV posi-
	      tional arg generally includes the	 VG  name  and	LV  name,  e.g.
	      VG/LV.

       String See  the option description for information about the string con-
	      tent.

       Size[UNIT]
	      Size is an input number that accepts  an	optional  unit.	  Input
	      units  are always treated as base two values, regardless of capi-
	      talization, e.g. 'k' and 'K' both refer to 1024.	The default in-
	      put unit is specified by letter, followed by |UNIT.  UNIT	 repre-
	      sents other possible input units: b|B is bytes, s|S is sectors of
	      512 bytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is
	      PiB,  e|E	 is  EiB.  (This should not be confused with the output
	      control --units, where capital letters mean multiple of 1000.)

ENVIRONMENT VARIABLES
       See lvm(8) for information about environment variables used by lvm.  For
       example, LVM_VG_NAME can generally be substituted for a required VG  pa-
       rameter.

NOTES
       To find the name of the pvmove LV that was created by an original pvmove
       /dev/name command, use the command:
       lvs -a -S move_pv=/dev/name.

EXAMPLES
       Continue polling a pvmove operation.
       lvm lvpoll --polloperation pvmove vg00/pvmove0

       Abort a pvmove operation.
       lvm lvpoll --polloperation pvmove --abort vg00/pvmove0

       Continue polling a mirror conversion.
       lvm lvpoll --polloperation convert vg00/lvmirror

       Continue mirror repair.
       lvm lvpoll --polloperation convert vg/damaged_mirror --handlemissingpvs

       Continue snapshot merge.
       lvm lvpoll --polloperation merge vg/snapshot_old

       Continue thin snapshot merge.
       lvm lvpoll --polloperation merge_thin vg/thin_snapshot

SEE ALSO
       lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),

       pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8),
       pvresize(8), pvs(8), pvscan(8),

       vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8),
       vgconvert(8), vgdisplay(8), vgexport(8), vgextend(8), vgimport(8),
       vgimportclone(8), vgimportdevices(8), vgmerge(8), vgmknodes(8),
       vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8),

       lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8),
       lvreduce(8), lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8),

       lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),

       dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8),
       lvmdbusd(8), fsadm(8),

       lvmsystemid(7), lvmreport(7), lvmcache(7), lvmraid(7), lvmthin(7),
       lvmvdo(7), lvmautoactivation(7)

LVM TOOLS 2.03.31(2) (2025-02-27)      8			    LVM(LVPOLL)