search..
No manual entry for -- in section 8
LVM(FULLREPORT)			 Red Hat, Inc.			LVM(FULLREPORT)

NAME
       lvm fullreport -- Display full report

SYNOPSIS
       lvm fullreport
	   [ option_args ]
	   [ position_args ]

DESCRIPTION
       lvm  fullreport	produces  formatted output about PVs, PV segments, VGs,
       LVs and LV segments. The information is all gathered together  for  each
       VG  (under a per-VG lock) so it is consistent. Information gathered from
       separate calls to vgs, pvs, and lvs can be inconsistent	if  information
       changes between commands.

USAGE
       lvm fullreport
	   [ -S|--select String ]
	   [ -a|--all ]
	   [ -o|--options String ]
	   [ -O|--sort String ]
	   [	--configreport log|vg|lv|pv|pvseg|seg ]
	   [	--foreign ]
	   [	--ignorelockingfailure ]
	   [	--logonly ]
	   [	--readonly ]
	   [	--reportformat basic|json|json_std ]
	   [	--shared ]
	   [	--units [Number]r|R|h|H|b|B|s|S|k|K|m|M|g|G|t|T|p|P|e|E ]
	   [	--aligned ]
	   [	--binary ]
	   [	--headings none|abbrev|full|0|1|2 ]
	   [	--nameprefixes ]
	   [	--noheadings ]
	   [	--nosuffix ]
	   [	--rows ]
	   [	--separator String ]
	   [	--unbuffered ]
	   [	--unquoted ]
	   [ COMMON_OPTIONS ]
	   [ VG ... ]

       Common options for lvm:
	   [ -d|--debug ]
	   [ -h|--help ]
	   [ -q|--quiet ]
	   [ -t|--test ]
	   [ -v|--verbose ]
	   [ -y|--yes ]
	   [	--commandprofile String ]
	   [	--config String ]
	   [	--devices PV ]
	   [	--devicesfile String ]
	   [	--driverloaded y|n ]
	   [	--journal String ]
	   [	--lockopt String ]
	   [	--longhelp ]
	   [	--nohints ]
	   [	--nolocking ]
	   [	--profile String ]
	   [	--version ]

OPTIONS

       --aligned
	      Use with --separator to align the output columns

       -a|--all

       --binary
	      Use  binary values "0" or "1" instead of descriptive literal val-
	      ues for columns that have exactly two valid values to report (not
	      counting the "unknown" value which denotes that the  value  could
	      not be determined).

       --commandprofile String
	      The  command  profile  to	 use  for  command  configuration.  See
	      lvm.conf(5) for more information about profiles.

       --config String
	      Config settings for the command. These override lvm.conf(5)  set-
	      tings.   The  String  arg uses the same format as lvm.conf(5), or
	      may use section/field syntax.  See lvm.conf(5) for more  informa-
	      tion about config.

       --configreport log|vg|lv|pv|pvseg|seg
	      See lvmreport(7).

       -d|--debug ...
	      Set  debug level. Repeat from 1 to 6 times to increase the detail
	      of messages sent to the log file and/or syslog (if configured).

       --devices PV
	      Restricts the devices that are visible and accessible to the com-
	      mand.  Devices not listed will appear to be missing. This	 option
	      can  be  repeated,  or accepts a comma separated list of devices.
	      This overrides the devices file.

       --devicesfile String
	      A file listing devices that LVM should use.  The file must  exist
	      in  /etc/lvm/devices/  and is managed with the lvmdevices(8) com-
	      mand.  This overrides the lvm.conf(5) devices/devicesfile and de-
	      vices/use_devicesfile settings.

       --driverloaded y|n
	      If set to no, the command will not attempt to use	 device-mapper.
	      For testing and debugging.

       --foreign
	      Report/display  foreign VGs that would otherwise be skipped.  See
	      lvmsystemid(7) for more information about foreign VGs.

       --headings none|abbrev|full|0|1|2
	      Type of headings to use in report output.	 none or  0:  No  head-
	      ings.   abbrev  or 1: Column name abbreviations.	full or 2: Full
	      column names.

       -h|--help
	      Display help text.

       --ignorelockingfailure
	      Allows a command to continue with read-only  metadata  operations
	      after locking failures.

       --journal String
	      Record  information  in the systemd journal.  This information is
	      in addition to information enabled by  the  lvm.conf  log/journal
	      setting.	command: record information about the command.	output:
	      record  the  default  command output.  debug: record full command
	      debugging.

       --lockopt String
	      Used to pass options for special cases  to  lvmlockd.   See  lvm-
	      lockd(8) for more information.

       --logonly
	      Suppress command report and display only log report.

       --longhelp
	      Display long help text.

       --nameprefixes
	      Add  an  "LVM2_" prefix plus the field name to the output. Useful
	      with --noheadings to produce a list of field=value pairs that can
	      be used to  set  environment  variables  (for  example,  in  udev
	      rules).

       --noheadings
	      Suppress	the  headings  line  that is normally the first line of
	      output.  Useful if grepping the output.

       --nohints
	      Do not use the hints file to locate devices for  PVs.  A	command
	      may  read	 more  devices to find PVs when hints are not used. The
	      command will still perform standard hint file invalidation  where
	      appropriate.

       --nolocking
	      Disable  locking.	 Use with caution, concurrent commands may pro-
	      duce incorrect results.

       --nosuffix
	      Suppress the suffix on output sizes. Use with --units  (except  h
	      and H) if processing the output.

       -o|--options String
	      Comma-separated,	ordered	 list  of fields to display in columns.
	      String arg syntax is: [+|-|#]Field1[,Field2 ...]	 The  prefix  +
	      will  append  the	 specified fields to the default fields, - will
	      remove the specified fields from the default fields, and	#  will
	      compact specified fields (removing them when empty for all rows.)
	      Use  -o help to view the list of all available fields.  Use sepa-
	      rate lists of fields to add, remove or compact by	 repeating  the
	      -o  option:  -o+field1,field2  -o-field3,field4 -o#field5.  These
	      lists are evaluated from left to right.  Use field name lv_all to
	      view all LV fields, vg_all all VG fields, pv_all all  PV	fields,
	      pvseg_all	 all  PV segment fields, seg_all all LV segment fields,
	      and pvseg_all all PV segment columns.  See the lvm.conf(5) report
	      section for more config options.	See lvmreport(7) for  more  in-
	      formation about reporting.

       --profile String
	      An  alias for --commandprofile or --metadataprofile, depending on
	      the command.

       -q|--quiet ...
	      Suppress output and log messages. Overrides  --debug  and	 --ver-
	      bose.  Repeat once to also suppress any prompts with answer 'no'.

       --readonly
	      Prevent the command from making changes, including activation and
	      metadata updates.	 (See --permission r for read only LVs.)

       --reportformat basic|json|json_std
	      Overrides	 current  output  format  for  reports which is defined
	      globally by the report/output_format setting in lvm.conf(5).  ba-
	      sic is the original format with columns and rows.	  If  there  is
	      more  than  one  report per command, each report is prefixed with
	      the report name for identification. json produces	 report	 output
	      in  JSON	format.	 json_std produces report output in JSON format
	      which is more compliant with JSON standard.  See lvmreport(7) for
	      more information.

       --rows
	      Output columns as rows.

       -S|--select String
	      Select objects for processing and reporting  based  on  specified
	      criteria.	  The criteria syntax is described by --select help and
	      lvmreport(7).  For reporting commands, one row is	 displayed  for
	      each object matching the criteria.  See --options help for selec-
	      table  object  fields.   Rows can be displayed with an additional
	      "selected" field (-o selected) showing 1 if the row  matches  the
	      selection	 and  0	 otherwise.   For  non-reporting commands which
	      process LVM entities, the selection is used to  choose  items  to
	      process.

       --separator String
	      String  to  use  to  separate each column. Useful if grepping the
	      output.

       --shared
	      Report/display shared VGs that would otherwise  be  skipped  when
	      lvmlockd is not being used on the host.  See lvmlockd(8) for more
	      information about shared VGs.

       -O|--sort String
	      Comma-separated  ordered list of columns to sort by. Replaces the
	      default selection. Precede any column with - for a  reverse  sort
	      on that column.

       -t|--test
	      Run in test mode. Commands will not update metadata.  This is im-
	      plemented	 by disabling all metadata writing but nevertheless re-
	      turning success to the calling function. This may lead to unusual
	      error messages in multi-stage operations	if  a  tool  relies  on
	      reading back metadata it believes has changed but hasn't.

       --unbuffered
	      Produce  output  immediately  without  sorting  or  aligning  the
	      columns properly.

       --units [Number]r|R|h|H|b|B|s|S|k|K|m|M|g|G|t|T|p|P|e|E
	      All sizes are output in these units:  human-(r)eadable  with  '<'
	      rounding	 indicator,   (h)uman-readable,	  (b)ytes,   (s)ectors,
	      (k)ilobytes, (m)egabytes, (g)igabytes, (t)erabytes,  (p)etabytes,
	      (e)xabytes.   Capitalise	to use multiples of 1000 (S.I.) instead
	      of 1024.	Custom units can be specified, e.g. --units 3M.

       --unquoted
	      When used with --nameprefixes, output values in  the  field=value
	      pairs are not quoted.

       -v|--verbose ...
	      Set  verbose  level. Repeat from 1 to 4 times to increase the de-
	      tail of messages sent to stdout and stderr.

       --version
	      Display version information.

       -y|--yes
	      Do not prompt for confirmation interactively  but	 always	 assume
	      the answer yes. Use with extreme caution.	 (For automatic no, see
	      -qq.)

VARIABLES
       VG     Volume Group name.  See lvm(8) for valid names.

       String See  the option description for information about the string con-
	      tent.

       Size[UNIT]
	      Size is an input number that accepts  an	optional  unit.	  Input
	      units  are always treated as base two values, regardless of capi-
	      talization, e.g. 'k' and 'K' both refer to 1024.	The default in-
	      put unit is specified by letter, followed by |UNIT.  UNIT	 repre-
	      sents other possible input units: b|B is bytes, s|S is sectors of
	      512 bytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is
	      PiB,  e|E	 is  EiB.  (This should not be confused with the output
	      control --units, where capital letters mean multiple of 1000.)

ENVIRONMENT VARIABLES
       See lvm(8) for information about environment variables used by lvm.  For
       example, LVM_VG_NAME can generally be substituted for a required VG  pa-
       rameter.

SEE ALSO
       lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),

       pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8),
       pvresize(8), pvs(8), pvscan(8),

       vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8),
       vgconvert(8), vgdisplay(8), vgexport(8), vgextend(8), vgimport(8),
       vgimportclone(8), vgimportdevices(8), vgmerge(8), vgmknodes(8),
       vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8),

       lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8),
       lvreduce(8), lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8),

       lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),

       dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8),
       lvmdbusd(8), fsadm(8),

       lvmsystemid(7), lvmreport(7), lvmcache(7), lvmraid(7), lvmthin(7),
       lvmvdo(7), lvmautoactivation(7)

LVM TOOLS 2.03.31(2) (2025-02-27)      8			LVM(FULLREPORT)