search..
No manual entry for -- in section 8
LVCONVERT(8)		    System Manager's Manual		   LVCONVERT(8)

NAME
       lvconvert -- Change logical volume layout

SYNOPSIS
       lvconvert option_args position_args
	   [ option_args ]
	   [ position_args ]

	   --alloc contiguous|cling|cling_by_tags|normal|anywhere|inherit
	-b|--background
	-H|--cache
	   --cachedevice PV
	   --cachemetadataformat auto|1|2
	   --cachemode writethrough|writeback|passthrough
	   --cachepolicy String
	   --cachepool LV
	   --cachesettings String
	   --cachesize Size[m|UNIT]
	   --cachevol LV
	-c|--chunksize Size[k|UNIT]
	   --commandprofile String
	   --compression y|n
	   --config String
	-d|--debug
	   --deduplication y|n
	   --devices PV
	   --devicesfile String
	   --discards passdown|nopassdown|ignore
	   --driverloaded y|n
	   --errorwhenfull y|n
	-f|--force
	-h|--help
	   --integritysettings String
	-i|--interval Number
	   --journal String
	   --lockopt String
	   --longhelp
	   --merge
	   --mergemirrors
	   --mergesnapshot
	   --mergethin
	   --metadataprofile String
	   --mirrorlog core|disk
	-m|--mirrors [+|-]Number
	-n|--name String
	   --nohints
	   --nolocking
	   --noudevsync
	   --originname LV
	   --pooldatavdo y|n
	   --poolmetadata LV
	   --poolmetadatasize Size[m|UNIT]
	   --poolmetadataspare y|n
	   --profile String
	-q|--quiet
	   --raidintegrity y|n
	   --raidintegrityblocksize Number
	   --raidintegritymode String
	-r|--readahead auto|none|Number
	-R|--regionsize Size[m|UNIT]
	   --repair
	   --replace PV
	-k|--setactivationskip y|n
	-s|--snapshot
	   --splitcache
	   --splitmirrors Number
	   --splitsnapshot
	   --startpoll
	   --stripes Number
	-I|--stripesize Size[k|UNIT]
	   --swapmetadata
	-t|--test
	-T|--thin
	   --thinpool LV
	   --trackchanges
	   --type linear|striped|snapshot|raid|mirror|thin|thin-pool|vdo|
       vdo-pool|cache|cache-pool|writecache
	   --uncache
	   --usepolicies
	   --vdopool LV
	   --vdosettings String
	-v|--verbose
	   --version
	-V|--virtualsize Size[m|UNIT]
	-W|--wipesignatures y|n
	-y|--yes
	-Z|--zero y|n

DESCRIPTION
       lvconvert changes the LV type and includes utilities for LV data mainte-
       nance.  The LV type controls data layout and redundancy.	 The LV type is
       also called the segment type or segtype.

       To display the current LV type, run the command:

       lvs -o name,segtype LV

       In some cases, an LV is a single device mapper (dm) layer above physical
       devices.	 In other cases, hidden LVs (dm devices)  are  layered	between
       the  visible  LV	 and  physical	devices.   LVs in the middle layers are
       called sub LVs.	A command run on a visible LV sometimes operates  on  a
       sub  LV	rather than the specified LV.  In other cases, a sub LV must be
       specified directly on the command line.

       Sub LVs can be displayed with the command:

       lvs -a

       The linear type is equivalent to the striped type when  one  stripe  ex-
       ists.  In that case, the types can sometimes be used interchangeably.

       In  most	 cases, the mirror type is deprecated and the raid1 type should
       be used.	 They are both implementations of mirroring.

       Striped raid types are raid0/raid0_meta, raid5 (an alias for  raid5_ls),
       raid6 (an alias for raid6_zr) and raid10 (an alias for raid10_near).

       As opposed to mirroring, raid5 and raid6 stripe data and calculate pari-
       ty blocks. The parity blocks can be used for data block recovery in case
       devices fail. A maximum number of one device in a raid5 LV may fail, and
       two in case of raid6. Striped raid types typically rotate the parity and
       data  blocks for performance reasons, thus avoiding contention on a sin-
       gle device. Specific arrangements of parity and	data  blocks  (layouts)
       can be used to optimize I/O performance, or to convert between raid lev-
       els.  See lvmraid(7) for more information.

       Layouts	 of  raid5  rotating  parity  blocks  can  be:	left-asymmetric
       (raid5_la), left-symmetric (raid5_ls with alias raid5), right-asymmetric
       (raid5_ra), right-symmetric (raid5_rs) and raid5_n, which doesn't rotate
       parity blocks. Layouts of raid6 are: zero-restart (raid6_zr  with  alias
       raid6), next-restart (raid6_nr), and next-continue (raid6_nc).

       Layouts	including  _n allow for conversion between raid levels (raid5_n
       to raid6 or raid5_n to striped/raid0/raid0_meta). Additionally,	special
       raid6  layouts  for  raid level conversions between raid5 and raid6 are:
       raid6_ls_6, raid6_rs_6, raid6_la_6 and raid6_ra_6. Those	 correspond  to
       their  raid5  counterparts  (e.g.  raid5_rs can be directly converted to
       raid6_rs_6 and vice-versa).

       raid10 (an alias for raid10_near) is currently limited to one data  copy
       and even number of sub LVs. This is a mirror group layout, thus a single
       sub LV may fail per mirror group without data loss.

       Striped	raid  types support converting the layout, their stripesize and
       their number of stripes.

       The striped raid types combined with raid1  allow  for  conversion  from
       linear  ->  striped/raid0/raid0_meta  and  vice-versa by e.g. linear <->
       raid1 <-> raid5_n (then adding stripes) <-> striped/raid0/raid0_meta.

USAGE
       Convert LV to linear.

       lvconvert --type linear LV
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

       Convert LV to striped.

       lvconvert --type striped LV
	   [ -I|--stripesize Size[k|UNIT] ]
	   [ -R|--regionsize Size[m|UNIT] ]
	   [ -i|--interval Number ]
	   [	--stripes Number ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

       Convert LV to type mirror (also see type raid1),

       lvconvert --type mirror LV
	   [ -m|--mirrors [+|-]Number ]
	   [ -I|--stripesize Size[k|UNIT] ]
	   [ -R|--regionsize Size[m|UNIT] ]
	   [ -i|--interval Number ]
	   [	--stripes Number ]
	   [	--mirrorlog core|disk ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

       Convert LV to raid or change raid layout
       (a specific raid level must be used, e.g. raid1).

       lvconvert --type raid LV
	   [ -m|--mirrors [+|-]Number ]
	   [ -I|--stripesize Size[k|UNIT] ]
	   [ -R|--regionsize Size[m|UNIT] ]
	   [ -i|--interval Number ]
	   [	--stripes Number ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

       Convert LV to raid1 or mirror, or change number of mirror images.

       lvconvert -m|--mirrors [+|-]Number LV
	   [ -R|--regionsize Size[m|UNIT] ]
	   [ -i|--interval Number ]
	   [	--mirrorlog core|disk ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

       Convert raid LV to change number of stripe images.

       lvconvert --stripes Number LV1
	   [ -i|--interval Number ]
	   [ -R|--regionsize Size[m|UNIT] ]
	   [ -I|--stripesize Size[k|UNIT] ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

	   LV1 types: raid

       --

       Convert raid LV to change the stripe size.

       lvconvert -I|--stripesize Size[k|UNIT] LV1
	   [ -i|--interval Number ]
	   [ -R|--regionsize Size[m|UNIT] ]
	   [ COMMON_OPTIONS ]

	   LV1 types: raid

       --

       Split images from a raid1 or mirror LV and use them to create a new LV.

       lvconvert --splitmirrors Number -n|--name LV_new LV1
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

	   LV1 types: cache mirror raid1

       --

       Split images from a raid1 LV and	 track	changes	 to  origin  for  later
       merge.

       lvconvert --splitmirrors Number --trackchanges LV1
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

	   LV1 types: cache raid1

       --

       Merge LV images that were split from a raid1 LV.

       lvconvert --mergemirrors VG|LV1|Tag ...
	   [ COMMON_OPTIONS ]

	   LV1 types: linear raid

       --

       Convert LV to a thin LV, using the original LV as an external origin.

       lvconvert --type thin --thinpool LV LV1
	   [ -T|--thin ]
	   [ -c|--chunksize Size[k|UNIT] ]
	   [ -r|--readahead auto|none|Number ]
	   [ -W|--wipesignatures y|n ]
	   [ -Z|--zero y|n ]
	   [	--originname LV_new ]
	   [	--poolmetadata LV ]
	   [	--poolmetadatasize Size[m|UNIT] ]
	   [	--poolmetadataspare y|n ]
	   [	--metadataprofile String ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

	   LV1 types: linear striped cache raid thin zero error

       --

       Convert LV to a thin LV, using LV as thin-pool data volume.

       lvconvert --type thin LV1
	   [ -T|--thin ]
	   [ -c|--chunksize Size[k|UNIT] ]
	   [ -r|--readahead auto|none|Number ]
	   [ -W|--wipesignatures y|n ]
	   [ -Z|--zero y|n ]
	   [	--poolmetadata LV ]
	   [	--poolmetadatasize Size[m|UNIT] ]
	   [	--poolmetadataspare y|n ]
	   [	--metadataprofile String ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

	   LV1 types: linear striped cache raid vdo writecache zero error

       --

       Attach a cache pool to an LV, converts the LV to type cache.

       lvconvert --type cache --cachepool LV LV1
	   [ -H|--cache ]
	   [ -Z|--zero y|n ]
	   [ -c|--chunksize Size[k|UNIT] ]
	   [ -r|--readahead auto|none|Number ]
	   [ -W|--wipesignatures y|n ]
	   [	--cachemetadataformat auto|1|2 ]
	   [	--cachemode writethrough|writeback|passthrough ]
	   [	--cachepolicy String ]
	   [	--cachesettings String ]
	   [	--poolmetadata LV ]
	   [	--poolmetadatasize Size[m|UNIT] ]
	   [	--poolmetadataspare y|n ]
	   [	--metadataprofile String ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

	   LV1 types: linear striped raid thin thinpool vdo vdopool vdopooldata
	   zero error

       --

       Attach a writecache to an LV, converts the LV to type writecache.

       lvconvert --type writecache --cachevol LV LV1
	   [	--cachesettings String ]
	   [ COMMON_OPTIONS ]

	   LV1 types: linear striped raid thinpool

       --

       Attach a cache to an LV, converts the LV to type cache.

       lvconvert --type cache --cachevol LV LV1
	   [ -H|--cache ]
	   [ -Z|--zero y|n ]
	   [ -c|--chunksize Size[k|UNIT] ]
	   [	--cachemetadataformat auto|1|2 ]
	   [	--cachemode writethrough|writeback|passthrough ]
	   [	--cachepolicy String ]
	   [	--cachesettings String ]
	   [	--poolmetadatasize Size[m|UNIT] ]
	   [ COMMON_OPTIONS ]

	   LV1 types: linear striped raid thinpool

       --

       Add a writecache to an LV, using a specified cache device.

       lvconvert --type writecache --cachedevice PV LV1
	   [	--cachesize Size[m|UNIT] ]
	   [	--cachesettings String ]
	   [ COMMON_OPTIONS ]

	   LV1 types: linear striped raid thinpool

       --

       Add a cache to an LV, using a specified cache device.

       lvconvert --type cache --cachedevice PV LV1
	   [ -c|--chunksize Size[k|UNIT] ]
	   [	--cachesize Size[m|UNIT] ]
	   [	--cachesettings String ]
	   [ COMMON_OPTIONS ]

	   LV1 types: linear striped raid thinpool

       --

       Convert LV to type thin-pool.

       lvconvert --type thin-pool LV1
	   [ -I|--stripesize Size[k|UNIT] ]
	   [ -c|--chunksize Size[k|UNIT] ]
	   [ -r|--readahead auto|none|Number ]
	   [ -W|--wipesignatures y|n ]
	   [ -Z|--zero y|n ]
	   [	--stripes Number ]
	   [	--discards passdown|nopassdown|ignore ]
	   [	--errorwhenfull y|n ]
	   [	--pooldatavdo y|n ]
	   [	--compression y|n ]
	   [	--deduplication y|n ]
	   [	--vdosettings String ]
	   [	--poolmetadata LV ]
	   [	--poolmetadatasize Size[m|UNIT] ]
	   [	--poolmetadataspare y|n ]
	   [	--metadataprofile String ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

	   LV1 types: linear striped cache raid vdo writecache zero error

       --

       Convert LV to type cache-pool.

       lvconvert --type cache-pool LV1
	   [ -Z|--zero y|n ]
	   [ -c|--chunksize Size[k|UNIT] ]
	   [ -r|--readahead auto|none|Number ]
	   [ -W|--wipesignatures y|n ]
	   [	--cachemetadataformat auto|1|2 ]
	   [	--cachemode writethrough|writeback|passthrough ]
	   [	--cachepolicy String ]
	   [	--cachesettings String ]
	   [	--poolmetadata LV ]
	   [	--poolmetadatasize Size[m|UNIT] ]
	   [	--poolmetadataspare y|n ]
	   [	--metadataprofile String ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

	   LV1 types: linear striped raid zero error

       --

       Convert LV to type vdopool.

       lvconvert --type vdo-pool LV1
	   [ -n|--name LV_new ]
	   [ -V|--virtualsize Size[m|UNIT] ]
	   [ -r|--readahead auto|none|Number ]
	   [ -W|--wipesignatures y|n ]
	   [ -Z|--zero y|n ]
	   [	--compression y|n ]
	   [	--deduplication y|n ]
	   [	--vdosettings String ]
	   [	--metadataprofile String ]
	   [ COMMON_OPTIONS ]

	   LV1 types: linear striped cache raid

       --

       Detach a cache from an LV.

       lvconvert --splitcache LV1
	   [	--cachesettings String ]
	   [ COMMON_OPTIONS ]

	   LV1 types: cache cachepool thinpool vdopool writecache

       --

       Merge thin LV into its origin LV.

       lvconvert --mergethin LV1 ...
	   [ COMMON_OPTIONS ]

	   LV1 types: thin

       --

       Merge COW snapshot LV into its origin.

       lvconvert --mergesnapshot LV1 ...
	   [ -i|--interval Number ]
	   [ COMMON_OPTIONS ]

	   LV1 types: snapshot

       --

       Combine a former COW snapshot (second arg) with a former
       origin LV (first arg) to reverse a splitsnapshot command.

       lvconvert --type snapshot LV LV1
	   [ -s|--snapshot ]
	   [ -c|--chunksize Size[k|UNIT] ]
	   [ -Z|--zero y|n ]
	   [ COMMON_OPTIONS ]

	   LV1 types: linear striped

       --

       Replace failed PVs in a raid or mirror LV.
       Repair a thin pool.
       Repair a cache pool.

       lvconvert --repair LV1
	   [ -i|--interval Number ]
	   [ -k|--setactivationskip y|n ]
	   [	--usepolicies ]
	   [	--poolmetadataspare y|n ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

	   LV1 types: cache cachepool mirror raid thinpool

       --

       Replace specific PV(s) in a raid LV with another PV.

       lvconvert --replace PV LV1
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

	   LV1 types: raid

       --

       Poll LV to continue conversion.

       lvconvert --startpoll LV1
	   [ COMMON_OPTIONS ]

	   LV1 types: mirror raid

       --

       Add or remove data integrity checksums to raid images.

       lvconvert --raidintegrity y|n LV1
	   [	--raidintegritymode String ]
	   [	--raidintegrityblocksize Number ]
	   [	--integritysettings String ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

	   LV1 types: raid

       --

       Common options for command:
	   [ -b|--background ]
	   [ -f|--force ]
	   [	--alloc contiguous|cling|cling_by_tags|normal|anywhere|inherit
	   ]
	   [	--noudevsync ]

       Common options for lvm:
	   [ -d|--debug ]
	   [ -h|--help ]
	   [ -q|--quiet ]
	   [ -t|--test ]
	   [ -v|--verbose ]
	   [ -y|--yes ]
	   [	--commandprofile String ]
	   [	--config String ]
	   [	--devices PV ]
	   [	--devicesfile String ]
	   [	--driverloaded y|n ]
	   [	--journal String ]
	   [	--lockopt String ]
	   [	--longhelp ]
	   [	--nohints ]
	   [	--nolocking ]
	   [	--profile String ]
	   [	--version ]

OPTIONS

       --alloc contiguous|cling|cling_by_tags|normal|anywhere|inherit
	      Determines the allocation policy when a command needs to allocate
	      Physical Extents (PEs) from the VG. Each VG and LV has an alloca-
	      tion policy which can be changed with vgchange/lvchange, or over-
	      ridden  on  the  command line.  normal applies common sense rules
	      such as not placing parallel stripes on the same PV.  inherit ap-
	      plies the VG policy to an LV.  contiguous	 requires  new	PEs  be
	      placed  adjacent	to  existing  PEs.  cling places new PEs on the
	      same PV as existing PEs in the same stripe of the LV.   If  there
	      are  sufficient  PEs  for	 an allocation, but normal does not use
	      them, anywhere will use them even if it reduces performance, e.g.
	      by placing two stripes on the same PV.   Optional	 positional  PV
	      args  on the command line can also be used to limit which PVs the
	      command will use for allocation.	See lvm(8) for more information
	      about allocation.

       -b|--background
	      If the operation requires polling, this option causes the command
	      to return before the operation is complete, and polling  is  done
	      in the background.

       -H|--cache
	      Specifies	 the command is handling a cache LV or cache pool.  See
	      --type cache and --type cache-pool.  See lvmcache(7) for more in-
	      formation about LVM caching.

       --cachedevice PV
	      The name of a device to use for a cache.

       --cachemetadataformat auto|1|2
	      Specifies the cache metadata format used by cache target.

       --cachemode writethrough|writeback|passthrough
	      Specifies when writes to a cache LV  should  be  considered  com-
	      plete.   writeback  considers  a	write complete as soon as it is
	      stored in the cache pool.	 writethough considers a write complete
	      only when it has been stored in both the cache pool  and	on  the
	      origin  LV.   While  writethrough may be slower for writes, it is
	      more resilient if something should happen to a device  associated
	      with  the	 cache	pool LV. With passthrough, all reads are served
	      from the origin LV (all reads miss the cache) and all writes  are
	      forwarded	 to the origin LV; additionally, write hits cause cache
	      block invalidates. See lvmcache(7) for more information.

       --cachepolicy String
	      Specifies the cache policy for a cache LV.  See  lvmcache(7)  for
	      more information.

       --cachepool LV
	      The name of a cache pool.

       --cachesettings String
	      Specifies	 tunable  kernel  options for dm-cache or dm-writecache
	      LVs.  Use the form 'option=value' or 'option1=value  option2=val-
	      ue',  or repeat --cachesettings for each option being set.  These
	      settings override the default kernel behaviors which are	usually
	      adequate.	 To remove cachesettings and revert to the default ker-
	      nel behaviors, use --cachesettings 'default' for dm-cache	 or  an
	      empty  string  --cachesettings  ''  for  dm-writecache.  See lvm-
	      cache(7) for more information.

       --cachesize Size[m|UNIT]
	      The size of cache to use.

       --cachevol LV
	      The name of a cache volume.

       -c|--chunksize Size[k|UNIT]
	      The size of chunks in a snapshot, cache pool or thin  pool.   For
	      snapshots,  the  value  must  be	a  power of 2 between 4 KiB and
	      512 KiB and the default value is 4.  For a cache pool  the  value
	      must  be	between	 32 KiB	 and 1 GiB and the default value is 64.
	      For a thin pool the value must be between 64 KiB	and  1 GiB  and
	      the  default  value  starts with 64 and scales up to fit the pool
	      metadata size within 128 MiB, if the pool metadata  size	is  not
	      specified.   The	value  must  be	 a  multiple  of  64 KiB.   See
	      lvmthin(7) and lvmcache(7) for more information.

       --commandprofile String
	      The command  profile  to	use  for  command  configuration.   See
	      lvm.conf(5) for more information about profiles.

       --compression y|n
	      Controls	whether	 compression is enabled or disable for VDO vol-
	      ume.  See lvmvdo(7) for more information about VDO usage.

       --config String
	      Config settings for the command. These override lvm.conf(5)  set-
	      tings.   The  String  arg uses the same format as lvm.conf(5), or
	      may use section/field syntax.  See lvm.conf(5) for more  informa-
	      tion about config.

       -d|--debug ...
	      Set  debug level. Repeat from 1 to 6 times to increase the detail
	      of messages sent to the log file and/or syslog (if configured).

       --deduplication y|n
	      Controls whether deduplication is enabled or disable for VDO vol-
	      ume.  See lvmvdo(7) for more information about VDO usage.

       --devices PV
	      Restricts the devices that are visible and accessible to the com-
	      mand.  Devices not listed will appear to be missing. This	 option
	      can  be  repeated,  or accepts a comma separated list of devices.
	      This overrides the devices file.

       --devicesfile String
	      A file listing devices that LVM should use.  The file must  exist
	      in  /etc/lvm/devices/  and is managed with the lvmdevices(8) com-
	      mand.  This overrides the lvm.conf(5) devices/devicesfile and de-
	      vices/use_devicesfile settings.

       --discards passdown|nopassdown|ignore
	      Specifies how the device-mapper thin pool	 layer	in  the	 kernel
	      should  handle  discards.	  ignore causes the thin pool to ignore
	      discards.	 nopassdown causes the thin pool  to  process  discards
	      itself  to  allow	 reuse	of  unneeded  extents in the thin pool.
	      passdown causes the thin pool to process	discards  itself  (like
	      nopassdown)  and pass the discards to the underlying device.  See
	      lvmthin(7) for more information.

       --driverloaded y|n
	      If set to no, the command will not attempt to use	 device-mapper.
	      For testing and debugging.

       --errorwhenfull y|n
	      Specifies	 thin pool behavior when data space is exhausted.  When
	      yes, device-mapper will immediately return an error when	a  thin
	      pool is full and an I/O request requires space.  When no, device-
	      mapper  will queue these I/O requests for a period of time to al-
	      low the thin pool to be extended.	  Errors  are  returned	 if  no
	      space  is	 available  after  the timeout.	 (Also see dm-thin-pool
	      kernel module option no_space_timeout.)  See lvmthin(7) for  more
	      information.

       -f|--force ...
	      Override various checks, confirmations and protections.  Use with
	      extreme caution.

       -h|--help
	      Display help text.

       --integritysettings String
	      Specifies	 tunable  kernel  options  for	dm-integrity.  See lvm-
	      raid(7) for more information.

       -i|--interval Number
	      Report progress at regular intervals.

       --journal String
	      Record information in the systemd journal.  This	information  is
	      in  addition  to	information enabled by the lvm.conf log/journal
	      setting.	command: record information about the command.	output:
	      record the default command output.  debug:  record  full	command
	      debugging.

       --lockopt String
	      Used  to	pass  options  for special cases to lvmlockd.  See lvm-
	      lockd(8) for more information.

       --longhelp
	      Display long help text.

       --merge
	      An alias for --mergethin, --mergemirrors, or --mergesnapshot, de-
	      pending on the type of LV.

       --mergemirrors
	      Merge LV images that were split from a raid1 LV.	See --splitmir-
	      rors with --trackchanges.

       --mergesnapshot
	      Merge COW snapshot LV into its origin.  When merging a  snapshot,
	      if  both the origin and snapshot LVs are not open, the merge will
	      start immediately. Otherwise, the merge will start the first time
	      either the origin or snapshot  LV	 are  activated	 and  both  are
	      closed.  Merging a snapshot into an origin that cannot be closed,
	      for example a root filesystem, is deferred until	the  next  time
	      the  origin volume is activated. When merging starts, the result-
	      ing LV will have the origin's name, minor number and UUID.  While
	      the merge is in progress, reads or writes to the origin appear as
	      being  directed to the snapshot being merged. When the merge fin-
	      ishes, the merged snapshot is removed.  Multiple snapshots may be
	      specified on the command line or a @tag may be  used  to	specify
	      multiple snapshots be merged to their respective origin.

       --mergethin
	      Merge  thin  LV into its origin LV.  The origin thin LV takes the
	      content of the thin snapshot, and the thin  snapshot  LV	is  re-
	      moved.  See lvmthin(7) for more information.

       --metadataprofile String
	      The  metadata  profile  to  use  for  command configuration.  See
	      lvm.conf(5) for more information about profiles.

       --mirrorlog core|disk
	      Specifies the type of mirror log for LVs with the	 "mirror"  type
	      (does  not  apply to the "raid1" type.)  disk is a persistent log
	      and requires a small amount of storage space, usually on a  sepa-
	      rate  device  from  the data being mirrored.  core is not persis-
	      tent; the log is kept only in memory.  In this case,  the	 mirror
	      must be synchronized (by copying LV data from the first device to
	      others)  each  time the LV is activated, e.g. after reboot.  mir-
	      rored is a persistent log that is itself mirrored, but should  be
	      avoided. Instead, use the raid1 type for log redundancy.

       -m|--mirrors [+|-]Number
	      Specifies the number of mirror images in addition to the original
	      LV  image, e.g. --mirrors 1 means there are two images of the da-
	      ta, the original and one mirror image.   Optional	 positional  PV
	      args  on	the  command  line  can	 specify the devices the images
	      should be placed on.  There are  two  mirroring  implementations:
	      "raid1"  and  "mirror".  These are the names of the corresponding
	      LV types, or "segment types".  Use the --type option  to	specify
	      which  to	 use  (raid1  is  default,  and	 mirror	 is legacy) Use
	      lvm.conf(5) global/mirror_segtype_default and  global/raid10_seg-
	      type_default  to	configure the default types.  The plus prefix +
	      can be used, in which case the number is	added  to  the	current
	      number  of  images,  or  the minus prefix - can be used, in which
	      case the number is subtracted from the current number of	images.
	      See lvmraid(7) for more information.

       -n|--name String
	      Specifies the name of a new LV.  When unspecified, a default name
	      of "lvol#" is generated, where # is a number generated by LVM.

       --nohints
	      Do  not  use  the hints file to locate devices for PVs. A command
	      may read more devices to find PVs when hints are	not  used.  The
	      command  will still perform standard hint file invalidation where
	      appropriate.

       --nolocking
	      Disable locking. Use with caution, concurrent commands  may  pro-
	      duce incorrect results.

       --noudevsync
	      Disables	udev synchronization. The process will not wait for no-
	      tification from udev. It will continue irrespective of any possi-
	      ble udev processing in the background. Only use this if  udev  is
	      not running or has rules that ignore the devices LVM creates.

       --originname LV
	      Specifies	 the  name  to use for the external origin LV when con-
	      verting an LV to a thin LV. The  LV  being  converted  becomes  a
	      read-only external origin with this name.

       --pooldatavdo y|n
	      Use VDO type volume for pool data volume.

       --poolmetadata LV
	      The name of a an LV to use for storing pool metadata.

       --poolmetadatasize Size[m|UNIT]
	      Specifies the size of the new pool metadata LV.

       --poolmetadataspare y|n
	      Enable  or  disable  the	automatic  creation and management of a
	      spare pool metadata LV in the VG. A spare metadata LV is reserved
	      space that can be used when repairing a pool.

       --profile String
	      An alias for --commandprofile or --metadataprofile, depending  on
	      the command.

       -q|--quiet ...
	      Suppress	output	and  log messages. Overrides --debug and --ver-
	      bose.  Repeat once to also suppress any prompts with answer 'no'.

       --raidintegrity y|n
	      Enable or disable data integrity checksums for raid images.

       --raidintegrityblocksize Number
	      The block size to use for dm-integrity on raid images.   The  in-
	      tegrity  block size should usually match the device logical block
	      size, or the file system block size.  It may  be	less  than  the
	      file  system  block  size,  but  not less than the device logical
	      block size.  Possible values: 512, 1024, 2048, 4096.

       --raidintegritymode String
	      Use a journal (default) or bitmap for keeping integrity checksums
	      consistent in case of a crash. The bitmap areas are  recalculated
	      after  a crash, so corruption in those areas would not be detect-
	      ed.  A journal does not have this problem.  The journal mode dou-
	      bles writes to storage, but can improve performance for scattered
	      writes packed into a single journal write.  bitmap  mode	can  in
	      theory achieve full write throughput of the device, but would not
	      benefit from the potential scattered write optimization.

       -r|--readahead auto|none|Number
	      Sets read ahead sector count of an LV.  auto is the default which
	      allows the kernel to choose a suitable value automatically.  none
	      is equivalent to zero.

       -R|--regionsize Size[m|UNIT]
	      Size  of each raid or mirror synchronization region.  lvm.conf(5)
	      activation/raid_region_size can be used to configure a default.

       --repair
	      Replace failed PVs in a raid or mirror LV, or run a repair utili-
	      ty on a thin pool. See lvmraid(7) and lvmthin(7) for more	 infor-
	      mation.

       --replace PV
	      Replace  a  specific PV in a raid LV with another PV.  The new PV
	      to use can be optionally specified after the  LV.	  Multiple  PVs
	      can  be  replaced	 by  repeating this option.  See lvmraid(7) for
	      more information.

       -k|--setactivationskip y|n
	      Persistently sets (yes) or clears (no) the "activation skip" flag
	      on an LV.	 An LV with this flag set is not activated  unless  the
	      --ignoreactivationskip  option is used by the activation command.
	      This flag is set by default on new thin snapshot LVs.   The  flag
	      is not applied to deactivation.  The current value of the flag is
	      indicated in the lvs lv_attr bits.

       -s|--snapshot
	      Combine  a  former COW snapshot LV with a former origin LV to re-
	      verse a previous --splitsnapshot command.

       --splitcache
	      Separates a cache pool from a cache  LV,	and  keeps  the	 unused
	      cache pool LV.  Before the separation, the cache is flushed. Also
	      see --uncache.

       --splitmirrors Number
	      Splits  the  specified number of images from a raid1 or mirror LV
	      and uses them to create a new LV. If --trackchanges is also spec-
	      ified, changes to the raid1 LV are tracked while the split LV re-
	      mains detached.  If --name is specified, then the images are per-
	      manently split from the original LV and changes are not  tracked.

       --splitsnapshot
	      Separates a COW snapshot from its origin LV. The LV that is split
	      off contains the chunks that differ from the origin LV along with
	      metadata describing them. This LV can be wiped and then destroyed
	      with lvremove.

       --startpoll
	      Start polling an LV to continue processing a conversion.

       --stripes Number
	      Specifies the number of stripes in a striped LV. This is the num-
	      ber  of  PVs  (devices)  that a striped LV is spread across. Data
	      that appears sequential in the LV is spread across  multiple  de-
	      vices  in	 units of the stripe size (see --stripesize). This does
	      not apply to existing allocated space, only newly allocated space
	      can be striped.

       -I|--stripesize Size[k|UNIT]
	      The amount of data that is written to one device before moving to
	      the next in a striped LV.

       --swapmetadata
	      Extracts the metadata LV from a pool and replaces it with another
	      specified LV.  The extracted LV is preserved and given  the  name
	      of  the LV that replaced it.  Use for repair only. When the meta-
	      data LV is swapped out of the pool, it can be activated  directly
	      and  used	 with thin provisioning tools: cache_dump(8), cache_re-
	      pair(8), cache_restore(8), thin_dump(8), thin_repair(8), thin_re-
	      store(8).

       -t|--test
	      Run in test mode. Commands will not update metadata.  This is im-
	      plemented by disabling all metadata writing but nevertheless  re-
	      turning success to the calling function. This may lead to unusual
	      error  messages  in  multi-stage	operations  if a tool relies on
	      reading back metadata it believes has changed but hasn't.

       -T|--thin
	      Specifies the command is handling a thin LV or  thin  pool.   See
	      --type thin, --type thin-pool, and --virtualsize.	 See lvmthin(7)
	      for more information about LVM thin provisioning.

       --thinpool LV
	      The name of a thin pool LV.

       --trackchanges
	      Can  be  used  with  --splitmirrors  on  a  raid1 LV. This causes
	      changes to the original raid1 LV to be tracked  while  the  split
	      images remain detached. This is a temporary state that allows the
	      read-only	 detached  image to be merged efficiently back into the
	      raid1 LV later.  Only the regions with changed  data  are	 resyn-
	      chronized	 during	 merge.	  While a raid1 LV is tracking changes,
	      operations on it are limited to  merging	the  split  image  (see
	      --mergemirrors)  or permanently splitting the image (see --split-
	      mirrors with --name.

       --type  linear|striped|snapshot|raid|mirror|thin|thin-pool|vdo|vdo-pool|
	      cache|cache-pool|writecache
	      The  LV type, also known as "segment type" or "segtype".	See us-
	      age descriptions for the specific ways to use these  types.   For
	      more  information about redundancy and performance (raid<N>, mir-
	      ror, striped, linear)  see  lvmraid(7).	For  thin  provisioning
	      (thin,   thin-pool)  see	lvmthin(7).   For  performance	caching
	      (cache, cache-pool) see lvmcache(7).  For copy-on-write snapshots
	      (snapshot) see usage definitions.	 For VDO (vdo)	see  lvmvdo(7).
	      Several commands omit an explicit type option because the type is
	      inferred	from other options or shortcuts (e.g. --stripes, --mir-
	      rors, --snapshot, --virtualsize, --thin,	--cache,  --vdo).   Use
	      inferred	types  with  care because it can lead to unexpected re-
	      sults.

       --uncache
	      Separates a cache pool from a cache LV, and  deletes  the	 unused
	      cache pool LV.  Before the separation, the cache is flushed. Also
	      see --splitcache.

       --usepolicies
	      Perform  an  operation  according	 to  the  policy  configured in
	      lvm.conf(5) or a profile.

       --vdopool LV
	      The name of a VDO pool LV.  See lvmvdo(7)	 for  more  information
	      about VDO usage.

       --vdosettings String
	      Specifies	 tunable  VDO  options	for VDO LVs.  Use the form 'op-
	      tion=value' or 'option1=value option2=value', or repeat --vdoset-
	      tings for each option being set.	These settings override the de-
	      fault VDO behaviors.  To remove vdosettings and revert to the de-
	      fault VDO behaviors, use --vdosettings 'default'.	 See  lvmvdo(7)
	      for more information.

       -v|--verbose ...
	      Set  verbose  level. Repeat from 1 to 4 times to increase the de-
	      tail of messages sent to stdout and stderr.

       --version
	      Display version information.

       -V|--virtualsize Size[m|UNIT]
	      The virtual size of a new thin LV.  See lvmthin(7) for  more  in-
	      formation	 about	LVM thin provisioning.	Using virtual size (-V)
	      and actual size (-L) together creates a sparse  LV.   lvm.conf(5)
	      global/sparse_segtype_default determines the default segment type
	      used to create a sparse LV.  Anything written to a sparse LV will
	      be  returned  when  reading from it.  Reading from other areas of
	      the LV will return blocks of zeros.  When	 using	a  snapshot  to
	      create  a sparse LV, a hidden virtual device is created using the
	      zero target, and the LV has the suffix _vorigin.	 Snapshots  are
	      less  efficient than thin provisioning when creating large sparse
	      LVs (GiB).

       -W|--wipesignatures y|n
	      Controls detection and subsequent wiping	of  signatures	on  new
	      LVs.   There  is	a prompt for each signature detected to confirm
	      its wiping (unless --yes	is  used  to  override	confirmations.)
	      When not specified, signatures are wiped whenever zeroing is done
	      (see  --zero).  This behaviour can be configured with lvm.conf(5)
	      allocation/wipe_signatures_when_zeroing_new_lvs.	If blkid wiping
	      is used (lvm.conf(5) allocation/use_blkid_wiping) and LVM is com-
	      piled with blkid wiping support, then  the  blkid(8)  library  is
	      used  to	detect	the signatures (use blkid -k to list the signa-
	      tures that are recognized).  Otherwise, native LVM code  is  used
	      to  detect signatures (only MD RAID, swap and LUKS signatures are
	      detected in this case.)  The LV is not wiped  if	the  read  only
	      flag is set.

       -y|--yes
	      Do  not  prompt  for confirmation interactively but always assume
	      the answer yes. Use with extreme caution.	 (For automatic no, see
	      -qq.)

       -Z|--zero y|n
	      For snapshots, this controls zeroing of the first 4 KiB  of  data
	      in the snapshot. If the LV is read-only, the snapshot will not be
	      zeroed.	For  thin  pools,  this controls zeroing of provisioned
	      blocks.  Provisioning of large zeroed chunks  negatively	impacts
	      performance.

VARIABLES
       VG     Volume Group name.  See lvm(8) for valid names.

       LV     Logical  Volume  name.   See lvm(8) for valid names.  An LV posi-
	      tional arg generally includes the	 VG  name  and	LV  name,  e.g.
	      VG/LV.  LV1 indicates the LV must have a specific type, where the
	      accepted LV types are listed. (raid represents raid<N> type).

       PV     Physical	Volume	name,  a  device path under /dev.  For commands
	      managing physical extents, a PV positional arg generally	accepts
	      a	 suffix indicating a range (or multiple ranges) of physical ex-
	      tents (PEs). When the first PE is omitted,  it  defaults	to  the
	      start  of the device, and when the last PE is omitted it defaults
	      to end.  Start and end range  (inclusive):  PV[:PE-PE]...	  Start
	      and length range (counting from 0): PV[:PE+PE]...

       Tag    Tag  name.   See lvm(8) for information about tag names and using
	      tags in place of a VG, LV or PV.

       String See the option description for information about the string  con-
	      tent.

       Size[UNIT]
	      Size  is	an  input  number that accepts an optional unit.  Input
	      units are always treated as base two values, regardless of  capi-
	      talization, e.g. 'k' and 'K' both refer to 1024.	The default in-
	      put  unit is specified by letter, followed by |UNIT.  UNIT repre-
	      sents other possible input units: b|B is bytes, s|S is sectors of
	      512 bytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is
	      PiB, e|E is EiB.	(This should not be confused  with  the	 output
	      control --units, where capital letters mean multiple of 1000.)

ENVIRONMENT VARIABLES
       See lvm(8) for information about environment variables used by lvm.  For
       example,	 LVM_VG_NAME can generally be substituted for a required VG pa-
       rameter.

ADVANCED USAGE
       Alternate command forms, advanced command  usage,  and  listing	of  all
       valid syntax for completeness.

       Change the region size of an LV.

       lvconvert -R|--regionsize Size[m|UNIT] LV1
	   [ COMMON_OPTIONS ]

	   LV1 types: raid

       --

       Change the type of mirror log used by a mirror LV.

       lvconvert --mirrorlog core|disk LV1
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

	   LV1 types: mirror

       --

       Convert LV to a thin LV, using the original LV as an external origin.

       lvconvert -T|--thin --thinpool LV LV1
	   [ --type thin ] (implied)
	   [ -c|--chunksize Size[k|UNIT] ]
	   [ -r|--readahead auto|none|Number ]
	   [ -W|--wipesignatures y|n ]
	   [ -Z|--zero y|n ]
	   [	--originname LV_new ]
	   [	--poolmetadata LV ]
	   [	--poolmetadatasize Size[m|UNIT] ]
	   [	--poolmetadataspare y|n ]
	   [	--metadataprofile String ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

	   LV1 types: linear striped cache raid thin zero error

       --

       Convert LV to a thin LV, using LV as thin-pool data volume.

       lvconvert -T|--thin LV1
	   [ --type thin ] (implied)
	   [ -c|--chunksize Size[k|UNIT] ]
	   [ -r|--readahead auto|none|Number ]
	   [ -W|--wipesignatures y|n ]
	   [ -Z|--zero y|n ]
	   [	--poolmetadata LV ]
	   [	--poolmetadatasize Size[m|UNIT] ]
	   [	--poolmetadataspare y|n ]
	   [	--metadataprofile String ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

	   LV1 types: linear striped cache raid vdo writecache zero error

       --

       Attach a cache pool to an LV.

       lvconvert -H|--cache --cachepool LV LV1
	   [ --type cache ] (implied)
	   [ -Z|--zero y|n ]
	   [ -c|--chunksize Size[k|UNIT] ]
	   [ -r|--readahead auto|none|Number ]
	   [ -W|--wipesignatures y|n ]
	   [	--cachemetadataformat auto|1|2 ]
	   [	--cachemode writethrough|writeback|passthrough ]
	   [	--cachepolicy String ]
	   [	--cachesettings String ]
	   [	--poolmetadata LV ]
	   [	--poolmetadatasize Size[m|UNIT] ]
	   [	--poolmetadataspare y|n ]
	   [	--metadataprofile String ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

	   LV1 types: linear striped raid thin thinpool vdo vdopool vdopooldata
	   zero error

       --

       Attach a cache to an LV, converts the LV to type cache.

       lvconvert -H|--cache --cachevol LV LV1
	   [ -Z|--zero y|n ]
	   [ -c|--chunksize Size[k|UNIT] ]
	   [	--cachemetadataformat auto|1|2 ]
	   [	--cachemode writethrough|writeback|passthrough ]
	   [	--cachepolicy String ]
	   [	--cachesettings String ]
	   [	--poolmetadatasize Size[m|UNIT] ]
	   [ COMMON_OPTIONS ]

	   LV1 types: linear striped raid thinpool

       --

       Convert LV to type vdopool.

       lvconvert --vdopool LV
	   [ --type vdo-pool ] (implied)
	   [ -r|--readahead auto|none|Number ]
	   [ -W|--wipesignatures y|n ]
	   [ -Z|--zero y|n ]
	   [ -n|--name LV_new ]
	   [ -V|--virtualsize Size[m|UNIT] ]
	   [	--compression y|n ]
	   [	--deduplication y|n ]
	   [	--vdosettings String ]
	   [	--metadataprofile String ]
	   [ COMMON_OPTIONS ]

       --

       Detach and delete a cache from an LV.

       lvconvert --uncache LV1
	   [	--cachesettings String ]
	   [ COMMON_OPTIONS ]

	   LV1 types: cache thinpool vdopool writecache

       --

       Swap metadata LV in a thin pool or cache pool (for repair only).

       lvconvert --swapmetadata --poolmetadata LV LV1
	   [ -c|--chunksize Size[k|UNIT] ]
	   [ COMMON_OPTIONS ]

	   LV1 types: cachepool thinpool

       --

       Merge LV that was split from a mirror (variant, use --mergemirrors).
       Merge thin LV into its origin LV (variant, use --mergethin).
       Merge COW snapshot LV into its origin (variant, use --mergesnapshot).

       lvconvert --merge VG|LV1|Tag ...
	   [ -i|--interval Number ]
	   [ COMMON_OPTIONS ]

	   LV1 types: linear striped snapshot raid thin

       --

       Separate a COW snapshot from its origin LV.

       lvconvert --splitsnapshot LV1
	   [ COMMON_OPTIONS ]

	   LV1 types: snapshot

       --

       Combine a former COW snapshot (second arg) with a former
       origin LV (first arg) to reverse a splitsnapshot command.

       lvconvert -s|--snapshot LV LV1
	   [ --type snapshot ] (implied)
	   [ -c|--chunksize Size[k|UNIT] ]
	   [ -Z|--zero y|n ]
	   [ COMMON_OPTIONS ]

	   LV1 types: linear striped

       --

       Poll LV to continue conversion (also see --startpoll)
       or waits till conversion/mirror syncing is finished

       lvconvert LV1
	   [ COMMON_OPTIONS ]

	   LV1 types: mirror raid

       --

NOTES
       This previous command syntax would perform two different operations:
       lvconvert --thinpool LV1 --poolmetadata LV2
       If  LV1	was  not  a  thin pool, the command would convert LV1 to a thin
       pool, optionally using a specified LV for metadata.  But, if LV1 was al-
       ready a thin pool, the command would swap the current metadata  LV  with
       LV2 (for repair purposes.)

       In  the same way, this previous command syntax would perform two differ-
       ent operations:
       lvconvert --cachepool LV1 --poolmetadata LV2
       If LV1 was not a cache pool, the command would convert LV1  to  a  cache
       pool, optionally using a specified LV for metadata.  But, if LV1 was al-
       ready  a cache pool, the command would swap the current metadata LV with
       LV2 (for repair purposes.)

EXAMPLES
       Convert a linear LV to a two-way mirror LV.
       lvconvert --type mirror --mirrors 1 vg/lvol1

       Convert a linear LV to a two-way RAID1 LV.
       lvconvert --type raid1 --mirrors 1 vg/lvol1

       Convert a mirror LV to use an in-memory log.
       lvconvert --mirrorlog core vg/lvol1

       Convert a mirror LV to use a disk log.
       lvconvert --mirrorlog disk vg/lvol1

       Convert a mirror or raid1 LV to a linear LV.
       lvconvert --type linear vg/lvol1

       Convert a mirror LV to a raid1 LV with the same number of images.
       lvconvert --type raid1 vg/lvol1

       Convert a linear LV to a two-way mirror LV, allocating new extents  from
       specific PV ranges.
       lvconvert --mirrors 1 vg/lvol1 /dev/sda:0-15 /dev/sdb:0-15

       Convert a mirror LV to a linear LV, freeing physical extents from a spe-
       cific PV.
       lvconvert --type linear vg/lvol1 /dev/sda

       Split one image from a mirror or raid1 LV, making it a new LV.
       lvconvert --splitmirrors 1 --name lv_split vg/lvol1

       Split  one image from a raid1 LV, and track changes made to the raid1 LV
       while the split image remains detached.
       lvconvert --splitmirrors 1 --trackchanges vg/lvol1

       Merge an image (that was	 previously  created  with  --splitmirrors  and
       --trackchanges) back into the original raid1 LV.
       lvconvert --mergemirrors vg/lvol1_rimage_1

       Replace PV /dev/sdb1 with PV /dev/sdf1 in a raid1/4/5/6/10 LV.
       lvconvert --replace /dev/sdb1 vg/lvol1 /dev/sdf1

       Replace 3 PVs /dev/sd[b-d]1 with PVs /dev/sd[f-h]1 in a raid1 LV.
       lvconvert --replace /dev/sdb1 --replace /dev/sdc1 --replace /dev/sdd1
	      vg/lvol1 /dev/sd[fgh]1

       Replace	the  maximum  of  2 PVs /dev/sd[bc]1 with PVs /dev/sd[gh]1 in a
       raid6 LV.
       lvconvert --replace /dev/sdb1 --replace /dev/sdc1 vg/lvol1 /dev/sd[gh]1

       Convert a thick LV into a thin-pool data volume and continue using  this
       LV  through  thinLV and for the conversion set the pool metadata size to
       1GiB.
       lvconvert --type thin --poolmetadatasize 1G vg/lvol1

       Convert an LV into a thin-pool with VDO	deduplication  and  compression
       for storing its data.
       lvconvert --type thin-pool --pooldatavdo y vg/lvol1

       Convert	an  LV into a thin LV in the specified thin pool.  The existing
       LV is used as an external read-only origin for the new thin LV.
       lvconvert --type thin --thinpool vg/tpool1 vg/lvol1

       Convert an LV into a thin LV in the specified thin pool.	  The  existing
       LV  is  used as an external read-only origin for the new thin LV, and is
       renamed "external".
       lvconvert --type thin --thinpool vg/tpool1
	      --originname external vg/lvol1

       Convert an LV to a cache pool LV using another specified	 LV  for  cache
       pool metadata.
       lvconvert --type cache-pool --poolmetadata vg/poolmeta1 vg/lvol1

       Convert	an  LV	to  a cache LV using the specified cache pool and chunk
       size.
       lvconvert --type cache --cachepool vg/cpool1 -c 128 vg/lvol1

       Detach and keep the cache pool from a cache LV.
       lvconvert --splitcache vg/lvol1

       Detach and remove the cache pool from a cache LV.
       lvconvert --uncache vg/lvol1

SEE ALSO
       lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),

       pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8),
       pvresize(8), pvs(8), pvscan(8),

       vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8),
       vgconvert(8), vgdisplay(8), vgexport(8), vgextend(8), vgimport(8),
       vgimportclone(8), vgimportdevices(8), vgmerge(8), vgmknodes(8),
       vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8),

       lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8),
       lvreduce(8), lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8),

       lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),

       dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8),
       lvmdbusd(8), fsadm(8),

       lvmsystemid(7), lvmreport(7), lvmcache(7), lvmraid(7), lvmthin(7),
       lvmvdo(7), lvmautoactivation(7)

Red Hat, Inc.	       LVM TOOLS 2.03.31(2) (2025-02-27)	   LVCONVERT(8)