search..
No manual entry for -- in section 8
BLKDEACTIVATE(8)	    System Manager's Manual	       BLKDEACTIVATE(8)

NAME
       blkdeactivate -- utility to deactivate block devices

SYNOPSIS
       blkdeactivate [-d dm_options] [-e] [-h] [-l lvm_options] [-m
       mpath_options] [-r mdraid_options] [-o vdo_options] [-u] [-v] [device]

DESCRIPTION
       The  blkdeactivate  utility deactivates block devices. For mounted block
       devices, it attempts to unmount it automatically before trying to  deac-
       tivate.	The  utility currently supports device-mapper devices (DM), in-
       cluding LVM volumes and software RAID MD devices. LVM volumes  are  han-
       dled  directly using the lvm(8) command, the rest of device-mapper based
       devices are handled using the dmsetup(8) command.  MD devices  are  han-
       dled using the mdadm(8) command.

OPTIONS
       -d|--dmoptions dm_options
	      Comma separated list of device-mapper specific options.  Accepted
	      dmsetup(8) options are:

	      retry  Retry removal several times in case of failure.

	      force  Force device removal.

       -e|--errors
	      Show  errors reported from tools called by blkdeactivate. Without
	      this option, any error messages from  these  external  tools  are
	      suppressed  and  the blkdeactivate itself provides only a summary
	      message to indicate the device was skipped.

       -h|--help
	      Display the help text.

       -l|--lvmoptions lvm_options
	      Comma-separated list of LVM specific options:

	      retry  Retry removal several times in case of failure.

	      wholevg
		     Deactivate the whole LVM Volume Group  when  processing  a
		     Logical  Volume.  Deactivating the Volume Group as a whole
		     is quicker than deactivating each Logical Volume separate-
		     ly.

       -r|--mdraidoptions mdraid_options
	      Comma-separated list of MD RAID specific options:

	      wait   Wait MD device's resync, recovery	or  reshape  action  to
		     complete before deactivation.

       -m|--mpathoptions mpath_options
	      Comma-separated list of device-mapper multipath specific options:

	      disablequeueing
		     Disable queueing on all multipath devices before deactiva-
		     tion.  This avoids a situation where blkdeactivate may end
		     up waiting if all the paths are unavailable for any under-
		     lying device-mapper multipath device.

       -o|--vdooptions vdo_options
	      Comma-separated list of VDO specific options:

	      configfile=file
		     Use specified VDO configuration file.

       -u|--umount
	      Unmount a mounted device before trying to deactivate it.	Without
	      this option used, a device that is mounted is not deactivated.

       -v, --verbose
	      Run in verbose mode. Use -vv for even more verbose mode.

EXAMPLES
       Deactivate  all	supported  block  devices found in the system, skipping
       mounted devices.
       # blkdeactivate

       Deactivate all supported block devices found in the  system,  unmounting
       any mounted devices first, if possible.
       # blkdeactivate -u

       Deactivate  the	device /dev/vg/lvol0 together with all its holders, un-
       mounting any mounted devices first, if possible.
       # blkdeactivate -u /dev/vg/lvol0

       Deactivate all supported block devices found in the system. If the deac-
       tivation of a device-mapper device fails, retry it. Deactivate the whole
       Volume Group at once when processing an LVM Logical Volume.
       # blkdeactivate -u -d retry -l wholevg

       Deactivate all supported block devices found in the system. If the deac-
       tivation of a device-mapper device fails, retry it and force removal.
       # blkdeactivate -d force,retry

SEE ALSO
       dmsetup(8), lsblk(8), lvm(8), mdadm(8), multipathd(8), vdo(8), umount(8)

Red Hat, Inc	       LVM TOOLS 2.03.31(2) (2025-02-27)       BLKDEACTIVATE(8)