search..
No manual entry for -- in section 8
VGCK(8)			    System Manager's Manual			VGCK(8)

NAME
       vgck -- Check the consistency of volume group(s)

SYNOPSIS
       vgck option_args position_args
	   [ option_args ]
	   [ position_args ]

DESCRIPTION
       vgck checks LVM metadata for consistency.

USAGE
       Read and display information about a VG.

       vgck
	   [	--reportformat basic|json|json_std ]
	   [ COMMON_OPTIONS ]
	   [ VG|Tag ... ]

       Rewrite VG metadata to correct problems.

       vgck --updatemetadata VG
	   [ COMMON_OPTIONS ]

       Common options for lvm:
	   [ -d|--debug ]
	   [ -h|--help ]
	   [ -q|--quiet ]
	   [ -t|--test ]
	   [ -v|--verbose ]
	   [ -y|--yes ]
	   [	--commandprofile String ]
	   [	--config String ]
	   [	--devices PV ]
	   [	--devicesfile String ]
	   [	--driverloaded y|n ]
	   [	--journal String ]
	   [	--lockopt String ]
	   [	--longhelp ]
	   [	--nohints ]
	   [	--nolocking ]
	   [	--profile String ]
	   [	--version ]

OPTIONS

       --commandprofile String
	      The  command  profile  to	 use  for  command  configuration.  See
	      lvm.conf(5) for more information about profiles.

       --config String
	      Config settings for the command. These override lvm.conf(5)  set-
	      tings.   The  String  arg uses the same format as lvm.conf(5), or
	      may use section/field syntax.  See lvm.conf(5) for more  informa-
	      tion about config.

       -d|--debug ...
	      Set  debug level. Repeat from 1 to 6 times to increase the detail
	      of messages sent to the log file and/or syslog (if configured).

       --devices PV
	      Restricts the devices that are visible and accessible to the com-
	      mand.  Devices not listed will appear to be missing. This	 option
	      can  be  repeated,  or accepts a comma separated list of devices.
	      This overrides the devices file.

       --devicesfile String
	      A file listing devices that LVM should use.  The file must  exist
	      in  /etc/lvm/devices/  and is managed with the lvmdevices(8) com-
	      mand.  This overrides the lvm.conf(5) devices/devicesfile and de-
	      vices/use_devicesfile settings.

       --driverloaded y|n
	      If set to no, the command will not attempt to use	 device-mapper.
	      For testing and debugging.

       -h|--help
	      Display help text.

       --journal String
	      Record  information  in the systemd journal.  This information is
	      in addition to information enabled by  the  lvm.conf  log/journal
	      setting.	command: record information about the command.	output:
	      record  the  default  command output.  debug: record full command
	      debugging.

       --lockopt String
	      Used to pass options for special cases  to  lvmlockd.   See  lvm-
	      lockd(8) for more information.

       --longhelp
	      Display long help text.

       --nohints
	      Do  not  use  the hints file to locate devices for PVs. A command
	      may read more devices to find PVs when hints are	not  used.  The
	      command  will still perform standard hint file invalidation where
	      appropriate.

       --nolocking
	      Disable locking. Use with caution, concurrent commands  may  pro-
	      duce incorrect results.

       --profile String
	      An  alias for --commandprofile or --metadataprofile, depending on
	      the command.

       -q|--quiet ...
	      Suppress output and log messages. Overrides  --debug  and	 --ver-
	      bose.  Repeat once to also suppress any prompts with answer 'no'.

       --reportformat basic|json|json_std
	      Overrides	 current  output  format  for  reports which is defined
	      globally by the report/output_format setting in lvm.conf(5).  ba-
	      sic is the original format with columns and rows.	  If  there  is
	      more  than  one  report per command, each report is prefixed with
	      the report name for identification. json produces	 report	 output
	      in  JSON	format.	 json_std produces report output in JSON format
	      which is more compliant with JSON standard.  See lvmreport(7) for
	      more information.

       -t|--test
	      Run in test mode. Commands will not update metadata.  This is im-
	      plemented by disabling all metadata writing but nevertheless  re-
	      turning success to the calling function. This may lead to unusual
	      error  messages  in  multi-stage	operations  if a tool relies on
	      reading back metadata it believes has changed but hasn't.

       --updatemetadata
	      Update VG metadata to correct problems.  If VG metadata  was  up-
	      dated  while  a  PV was missing, and the PV reappears with an old
	      version of metadata, then this option (or any other command  that
	      writes metadata) will update the metadata on the previously miss-
	      ing  PV.	If a PV was removed from a VG while it was missing, and
	      the PV reappears, using this option will clear the outdated meta-
	      data from the previously missing PV. If metadata text is	damaged
	      on  one  PV,  using this option will replace the damaged metadata
	      text. For more severe damage, e.g. with headers, see pvck(8).

       -v|--verbose ...
	      Set verbose level. Repeat from 1 to 4 times to increase  the  de-
	      tail of messages sent to stdout and stderr.

       --version
	      Display version information.

       -y|--yes
	      Do  not  prompt  for confirmation interactively but always assume
	      the answer yes. Use with extreme caution.	 (For automatic no, see
	      -qq.)

VARIABLES
       VG     Volume Group name.  See lvm(8) for valid names.

       Tag    Tag name.	 See lvm(8) for information about tag names  and  using
	      tags in place of a VG, LV or PV.

       String See  the option description for information about the string con-
	      tent.

       Size[UNIT]
	      Size is an input number that accepts  an	optional  unit.	  Input
	      units  are always treated as base two values, regardless of capi-
	      talization, e.g. 'k' and 'K' both refer to 1024.	The default in-
	      put unit is specified by letter, followed by |UNIT.  UNIT	 repre-
	      sents other possible input units: b|B is bytes, s|S is sectors of
	      512 bytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is
	      PiB,  e|E	 is  EiB.  (This should not be confused with the output
	      control --units, where capital letters mean multiple of 1000.)

ENVIRONMENT VARIABLES
       See lvm(8) for information about environment variables used by lvm.  For
       example, LVM_VG_NAME can generally be substituted for a required VG  pa-
       rameter.

SEE ALSO
       lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),

       pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8),
       pvresize(8), pvs(8), pvscan(8),

       vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8),
       vgconvert(8), vgdisplay(8), vgexport(8), vgextend(8), vgimport(8),
       vgimportclone(8), vgimportdevices(8), vgmerge(8), vgmknodes(8),
       vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8),

       lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8),
       lvreduce(8), lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8),

       lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),

       dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8),
       lvmdbusd(8), fsadm(8),

       lvmsystemid(7), lvmreport(7), lvmcache(7), lvmraid(7), lvmthin(7),
       lvmvdo(7), lvmautoactivation(7)

Red Hat, Inc.	       LVM TOOLS 2.03.31(2) (2025-02-27)		VGCK(8)