search..
No manual entry for -- in section 8
LVCREATE(8)		    System Manager's Manual		    LVCREATE(8)

NAME
       lvcreate -- Create a logical volume

SYNOPSIS
       lvcreate option_args position_args
	   [ option_args ]
	   [ position_args ]

	-a|--activate y|n|ay
	   --addtag Tag
	   --alloc contiguous|cling|cling_by_tags|normal|anywhere|inherit
	-A|--autobackup y|n
	-H|--cache
	   --cachedevice PV
	   --cachemetadataformat auto|1|2
	   --cachemode writethrough|writeback|passthrough
	   --cachepolicy String
	   --cachepool LV
	   --cachesettings String
	   --cachesize Size[m|UNIT]
	   --cachevol LV
	-c|--chunksize Size[k|UNIT]
	   --commandprofile String
	   --compression y|n
	   --config String
	-C|--contiguous y|n
	-d|--debug
	   --deduplication y|n
	   --devices PV
	   --devicesfile String
	   --discards passdown|nopassdown|ignore
	   --driverloaded y|n
	   --errorwhenfull y|n
	-l|--extents Number[PERCENT]
	-h|--help
	-K|--ignoreactivationskip
	   --ignoremonitoring
	   --integritysettings String
	   --journal String
	   --lockopt String
	   --longhelp
	-j|--major Number
	   --[raid]maxrecoveryrate Size[k|UNIT]
	   --metadataprofile String
	   --minor Number
	   --[raid]minrecoveryrate Size[k|UNIT]
	   --mirrorlog core|disk
	-m|--mirrors Number
	   --monitor y|n
	-n|--name String
	   --nohints
	   --nolocking
	   --nosync
	   --noudevsync
	-p|--permission rw|r
	-M|--persistent y|n
	   --pooldatavdo y|n
	   --poolmetadatasize Size[m|UNIT]
	   --poolmetadataspare y|n
	   --profile String
	-q|--quiet
	   --raidintegrity y|n
	   --raidintegrityblocksize Number
	   --raidintegritymode String
	-r|--readahead auto|none|Number
	-R|--regionsize Size[m|UNIT]
	   --reportformat basic|json|json_std
	-k|--setactivationskip y|n
	   --setautoactivation y|n
	-L|--size Size[m|UNIT]
	-s|--snapshot
	-i|--stripes Number
	-I|--stripesize Size[k|UNIT]
	-t|--test
	-T|--thin
	   --thinpool LV
	   --type linear|striped|snapshot|raid|mirror|thin|thin-pool|vdo|
       vdo-pool|cache|cache-pool|writecache
	   --vdo
	   --vdopool LV
	   --vdosettings String
	-v|--verbose
	   --version
	-V|--virtualsize Size[m|UNIT]
	-W|--wipesignatures y|n
	-y|--yes
	-Z|--zero y|n

DESCRIPTION
       lvcreate creates a new LV in a VG. For standard LVs, this requires allo-
       cating  logical extents from the VG's free physical extents. If there is
       not enough free space, the VG can be  extended  with  other  PVs	 (vgex-
       tend(8)),  or existing LVs can be reduced or removed (lvremove(8), lvre-
       duce(8)).

       To control which PVs a new LV will use, specify one or more PVs as posi-
       tion args at the end of the command line. lvcreate will allocate	 physi-
       cal extents only from the specified PVs.

       lvcreate can also create snapshots of existing LVs, e.g. for backup pur-
       poses. The data in a new snapshot LV represents the content of the orig-
       inal LV from the time the snapshot was created.

       RAID  LVs  can  be created by specifying an LV type when creating the LV
       (see lvmraid(7)). Different RAID levels	require	 different  numbers  of
       unique PVs be available in the VG for allocation.

       Thin  pools  (for  thin	provisioning) and cache pools (for caching) are
       represented by special LVs with	types  thin-pool  and  cache-pool  (see
       lvmthin(7)  and	lvmcache(7)).  The  pool LVs are not usable as standard
       block devices, but the LV names act as references to the pools.

       Thin LVs are thinly provisioned from a thin pool, and are created with a
       virtual size rather than a physical size. A cache LV is the  combination
       of a standard LV with a cache pool, used to cache active portions of the
       LV to improve performance.

       VDO  LVs	 are  also provisioned volumes from a VDO pool, and are created
       with a virtual size rather than a physical size (see lvmvdo(7)).

   Usage notes
       In the usage section below, --size Size can be replaced	with  --extents
       Number. See descriptions in the options section.

       In the usage section below, --name is omitted from the required options,
       even  though it is typically used. When the name is not specified, a new
       LV name is generated with the "lvol" prefix and a unique numeric suffix.

       In the usage section below, when creating a pool and the name is omitted
       the new LV pool name is generated with the "vpool"  for	vdo-pools   for
       prefix and a unique numeric suffix.

       Pool name can be specified together with VG name i.e.: vg00/mythinpool.

USAGE
       Create a linear LV.

       lvcreate -L|--size Size[m|UNIT] VG
	   [ --type linear ] (implied) [ -l|--extents Number[PERCENT] ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

       Create a striped LV.

       lvcreate -i|--stripes Number -L|--size Size[m|UNIT] VG
	   [ --type striped ] (implied) [ -l|--extents Number[PERCENT] ]
	   [ -I|--stripesize Size[k|UNIT] ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

       Create a raid1 or mirror LV.

       lvcreate -m|--mirrors Number -L|--size Size[m|UNIT] VG
	   [ --type raid1|mirror ] (implied) [ -l|--extents Number[PERCENT] ]
	   [ -I|--stripesize Size[k|UNIT] ]
	   [ -R|--regionsize Size[m|UNIT] ]
	   [	--mirrorlog core|disk ]
	   [	--[raid]minrecoveryrate Size[k|UNIT] ]
	   [	--[raid]maxrecoveryrate Size[k|UNIT] ]
	   [	--raidintegrity y|n ]
	   [	--raidintegritymode String ]
	   [	--raidintegrityblocksize Number ]
	   [	--integritysettings String ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

       Create a raid LV (a specific raid level must be used, e.g. raid1).

       lvcreate --type raid -L|--size Size[m|UNIT] VG
	   [ -l|--extents Number[PERCENT] ]
	   [ -m|--mirrors Number ]
	   [ -i|--stripes Number ]
	   [ -I|--stripesize Size[k|UNIT] ]
	   [ -R|--regionsize Size[m|UNIT] ]
	   [	--[raid]minrecoveryrate Size[k|UNIT] ]
	   [	--[raid]maxrecoveryrate Size[k|UNIT] ]
	   [	--raidintegrity y|n ]
	   [	--raidintegritymode String ]
	   [	--raidintegrityblocksize Number ]
	   [	--integritysettings String ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

       Create a raid10 LV.

       lvcreate -m|--mirrors Number -i|--stripes Number
	     -L|--size Size[m|UNIT] VG
	   [ --type raid10 ] (implied) [ -l|--extents Number[PERCENT] ]
	   [ -I|--stripesize Size[k|UNIT] ]
	   [ -R|--regionsize Size[m|UNIT] ]
	   [	--[raid]minrecoveryrate Size[k|UNIT] ]
	   [	--[raid]maxrecoveryrate Size[k|UNIT] ]
	   [	--raidintegrity y|n ]
	   [	--raidintegritymode String ]
	   [	--raidintegrityblocksize Number ]
	   [	--integritysettings String ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

       Create a COW snapshot LV of an origin LV.

       lvcreate -s|--snapshot -L|--size Size[m|UNIT] LV
	   [ --type snapshot ] (implied) [ -l|--extents Number[PERCENT] ]
	   [ -i|--stripes Number ]
	   [ -I|--stripesize Size[k|UNIT] ]
	   [ -c|--chunksize Size[k|UNIT] ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

       Create a thin pool.

       lvcreate --type thin-pool -L|--size Size[m|UNIT] VG
	   [ -l|--extents Number[PERCENT] ]
	   [ -i|--stripes Number ]
	   [ -I|--stripesize Size[k|UNIT] ]
	   [ -T|--thin ]
	   [ -c|--chunksize Size[k|UNIT] ]
	   [	--thinpool LV_new ]
	   [	--discards passdown|nopassdown|ignore ]
	   [	--errorwhenfull y|n ]
	   [	--pooldatavdo y|n ]
	   [	--compression y|n ]
	   [	--deduplication y|n ]
	   [	--vdosettings String ]
	   [	--poolmetadatasize Size[m|UNIT] ]
	   [	--poolmetadataspare y|n ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

       Create a cache pool.

       lvcreate --type cache-pool -L|--size Size[m|UNIT] VG
	   [ -l|--extents Number[PERCENT] ]
	   [ -i|--stripes Number ]
	   [ -I|--stripesize Size[k|UNIT] ]
	   [ -H|--cache ]
	   [ -c|--chunksize Size[k|UNIT] ]
	   [	--cachemode writethrough|writeback|passthrough ]
	   [	--cachepolicy String ]
	   [	--cachesettings String ]
	   [	--cachemetadataformat auto|1|2 ]
	   [	--poolmetadatasize Size[m|UNIT] ]
	   [	--poolmetadataspare y|n ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

       Create a thin LV in a thin pool.

       lvcreate -V|--virtualsize Size[m|UNIT] --thinpool LV VG
	   [ --type thin ] (implied)
	   [ -T|--thin ]
	   [ COMMON_OPTIONS ]

       --

       Create a thin LV that is a snapshot of an existing thin LV.

       lvcreate -s|--snapshot LV1
	   [ --type thin ] (implied)
	   [ COMMON_OPTIONS ]

	   LV1 types: thin

       --

       Create a thin LV that is a snapshot of an external origin LV.

       lvcreate --type thin --thinpool LV LV
	   [ -T|--thin ]
	   [ COMMON_OPTIONS ]

       --

       Create a LV that returns VDO when used.

       lvcreate --type vdo -L|--size Size[m|UNIT] VG
	   [ -l|--extents Number[PERCENT] ]
	   [ -i|--stripes Number ]
	   [ -I|--stripesize Size[k|UNIT] ]
	   [ -V|--virtualsize Size[m|UNIT] ]
	   [	--vdo ]
	   [	--vdopool LV_new ]
	   [	--compression y|n ]
	   [	--deduplication y|n ]
	   [	--vdosettings String ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

       Create a new LV, then attach the specified cachepool
       which converts the new LV to type cache.

       lvcreate --type cache -L|--size Size[m|UNIT]
	     --cachepool LV VG
	   [ -l|--extents Number[PERCENT] ]
	   [ -i|--stripes Number ]
	   [ -I|--stripesize Size[k|UNIT] ]
	   [ -H|--cache ]
	   [ -c|--chunksize Size[k|UNIT] ]
	   [	--cachemode writethrough|writeback|passthrough ]
	   [	--cachepolicy String ]
	   [	--cachesettings String ]
	   [	--cachemetadataformat auto|1|2 ]
	   [	--poolmetadatasize Size[m|UNIT] ]
	   [	--poolmetadataspare y|n ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

       Create a new LV, then attach the specified cachevol
       which converts the new LV to type cache.

       lvcreate --type cache -L|--size Size[m|UNIT]
	     --cachevol LV VG
	   [ -l|--extents Number[PERCENT] ]
	   [ -i|--stripes Number ]
	   [ -I|--stripesize Size[k|UNIT] ]
	   [ -c|--chunksize Size[k|UNIT] ]
	   [	--cachemode writethrough|writeback|passthrough ]
	   [	--cachepolicy String ]
	   [	--cachesettings String ]
	   [	--cachemetadataformat auto|1|2 ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

       Create a new LV, then attach a cachevol created from
       the specified cache device, which converts the
       new LV to type cache.

       lvcreate --type cache -L|--size Size[m|UNIT]
	     --cachedevice PV VG
	   [ -l|--extents Number[PERCENT] ]
	   [ -i|--stripes Number ]
	   [ -I|--stripesize Size[k|UNIT] ]
	   [ -c|--chunksize Size[k|UNIT] ]
	   [	--cachesize Size[m|UNIT] ]
	   [	--cachemode writethrough|writeback|passthrough ]
	   [	--cachepolicy String ]
	   [	--cachesettings String ]
	   [	--cachemetadataformat auto|1|2 ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

       Create a new LV, then attach the specified cachevol
       which converts the new LV to type writecache.

       lvcreate --type writecache -L|--size Size[m|UNIT]
	     --cachevol LV VG
	   [ -l|--extents Number[PERCENT] ]
	   [ -i|--stripes Number ]
	   [ -I|--stripesize Size[k|UNIT] ]
	   [	--cachesettings String ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

       Create a new LV, then attach a cachevol created from
       the specified cache device, which converts the
       new LV to type writecache.

       lvcreate --type writecache -L|--size Size[m|UNIT]
	     --cachedevice PV VG
	   [ -l|--extents Number[PERCENT] ]
	   [ -i|--stripes Number ]
	   [ -I|--stripesize Size[k|UNIT] ]
	   [	--cachesize Size[m|UNIT] ]
	   [	--cachesettings String ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

       Common options for command:
	   [ -a|--activate y|n|ay ]
	   [ -A|--autobackup y|n ]
	   [ -C|--contiguous y|n ]
	   [ -K|--ignoreactivationskip ]
	   [ -j|--major Number ]
	   [ -n|--name String ]
	   [ -p|--permission rw|r ]
	   [ -M|--persistent y|n ]
	   [ -r|--readahead auto|none|Number ]
	   [ -k|--setactivationskip y|n ]
	   [ -W|--wipesignatures y|n ]
	   [ -Z|--zero y|n ]
	   [	--addtag Tag ]
	   [	--alloc contiguous|cling|cling_by_tags|normal|anywhere|inherit
	   ]
	   [	--ignoremonitoring ]
	   [	--metadataprofile String ]
	   [	--minor Number ]
	   [	--monitor y|n ]
	   [	--nosync ]
	   [	--noudevsync ]
	   [	--reportformat basic|json|json_std ]
	   [	--setautoactivation y|n ]

       Common options for lvm:
	   [ -d|--debug ]
	   [ -h|--help ]
	   [ -q|--quiet ]
	   [ -t|--test ]
	   [ -v|--verbose ]
	   [ -y|--yes ]
	   [	--commandprofile String ]
	   [	--config String ]
	   [	--devices PV ]
	   [	--devicesfile String ]
	   [	--driverloaded y|n ]
	   [	--journal String ]
	   [	--lockopt String ]
	   [	--longhelp ]
	   [	--nohints ]
	   [	--nolocking ]
	   [	--profile String ]
	   [	--version ]

OPTIONS

       -a|--activate y|n|ay
	      Controls	the active state of the new LV.	 y makes the LV active,
	      or available.  New LVs are made active by default.  n  makes  the
	      LV  inactive, or unavailable, only when possible.	 In some cases,
	      creating an LV requires it to be active.	For example, COW  snap-
	      shots  of	 an  active origin LV can only be created in the active
	      state (this does not apply to thin snapshots).  The --zero option
	      normally requires the LV to be active.  If autoactivation	 ay  is
	      used,  the  LV  is  only	activated  if  it  matches  an	item in
	      lvm.conf(5) activation/auto_activation_volume_list.   ay	implies
	      --zero n and --wipesignatures n.	See lvmlockd(8) for more infor-
	      mation about activation options for shared VGs.

       --addtag Tag
	      Adds  a tag to a PV, VG or LV. This option can be repeated to add
	      multiple tags at once. See lvm(8) for information about tags.

       --alloc contiguous|cling|cling_by_tags|normal|anywhere|inherit
	      Determines the allocation policy when a command needs to allocate
	      Physical Extents (PEs) from the VG. Each VG and LV has an alloca-
	      tion policy which can be changed with vgchange/lvchange, or over-
	      ridden on the command line.  normal applies  common  sense  rules
	      such as not placing parallel stripes on the same PV.  inherit ap-
	      plies  the  VG  policy  to an LV.	 contiguous requires new PEs be
	      placed adjacent to existing PEs.	cling places  new  PEs	on  the
	      same  PV	as existing PEs in the same stripe of the LV.  If there
	      are sufficient PEs for an allocation, but	 normal	 does  not  use
	      them, anywhere will use them even if it reduces performance, e.g.
	      by  placing  two	stripes on the same PV.	 Optional positional PV
	      args on the command line can also be used to limit which PVs  the
	      command will use for allocation.	See lvm(8) for more information
	      about allocation.

       -A|--autobackup y|n
	      Specifies	 if  metadata should be backed up automatically after a
	      change.  Enabling this is strongly advised!   See	 vgcfgbackup(8)
	      for more information.

       -H|--cache
	      Specifies	 the command is handling a cache LV or cache pool.  See
	      --type cache and --type cache-pool.  See lvmcache(7) for more in-
	      formation about LVM caching.

       --cachedevice PV
	      The name of a device to use for a cache.

       --cachemetadataformat auto|1|2
	      Specifies the cache metadata format used by cache target.

       --cachemode writethrough|writeback|passthrough
	      Specifies when writes to a cache LV  should  be  considered  com-
	      plete.   writeback  considers  a	write complete as soon as it is
	      stored in the cache pool.	 writethough considers a write complete
	      only when it has been stored in both the cache pool  and	on  the
	      origin  LV.   While  writethrough may be slower for writes, it is
	      more resilient if something should happen to a device  associated
	      with  the	 cache	pool LV. With passthrough, all reads are served
	      from the origin LV (all reads miss the cache) and all writes  are
	      forwarded	 to the origin LV; additionally, write hits cause cache
	      block invalidates. See lvmcache(7) for more information.

       --cachepolicy String
	      Specifies the cache policy for a cache LV.  See  lvmcache(7)  for
	      more information.

       --cachepool LV
	      The name of a cache pool.

       --cachesettings String
	      Specifies	 tunable  kernel  options for dm-cache or dm-writecache
	      LVs.  Use the form 'option=value' or 'option1=value  option2=val-
	      ue',  or repeat --cachesettings for each option being set.  These
	      settings override the default kernel behaviors which are	usually
	      adequate.	 To remove cachesettings and revert to the default ker-
	      nel behaviors, use --cachesettings 'default' for dm-cache	 or  an
	      empty  string  --cachesettings  ''  for  dm-writecache.  See lvm-
	      cache(7) for more information.

       --cachesize Size[m|UNIT]
	      The size of cache to use.

       --cachevol LV
	      The name of a cache volume.

       -c|--chunksize Size[k|UNIT]
	      The size of chunks in a snapshot, cache pool or thin  pool.   For
	      snapshots,  the  value  must  be	a  power of 2 between 4 KiB and
	      512 KiB and the default value is 4.  For a cache pool  the  value
	      must  be	between	 32 KiB	 and 1 GiB and the default value is 64.
	      For a thin pool the value must be between 64 KiB	and  1 GiB  and
	      the  default  value  starts with 64 and scales up to fit the pool
	      metadata size within 128 MiB, if the pool metadata  size	is  not
	      specified.   The	value  must  be	 a  multiple  of  64 KiB.   See
	      lvmthin(7) and lvmcache(7) for more information.

       --commandprofile String
	      The command  profile  to	use  for  command  configuration.   See
	      lvm.conf(5) for more information about profiles.

       --compression y|n
	      Controls	whether	 compression is enabled or disable for VDO vol-
	      ume.  See lvmvdo(7) for more information about VDO usage.

       --config String
	      Config settings for the command. These override lvm.conf(5)  set-
	      tings.   The  String  arg uses the same format as lvm.conf(5), or
	      may use section/field syntax.  See lvm.conf(5) for more  informa-
	      tion about config.

       -C|--contiguous y|n
	      Sets or resets the contiguous allocation policy for LVs.	Default
	      is  no  contiguous allocation based on a next free principle.  It
	      is only possible to change a non-contiguous allocation policy  to
	      contiguous if all of the allocated physical extents in the LV are
	      already contiguous.

       -d|--debug ...
	      Set  debug level. Repeat from 1 to 6 times to increase the detail
	      of messages sent to the log file and/or syslog (if configured).

       --deduplication y|n
	      Controls whether deduplication is enabled or disable for VDO vol-
	      ume.  See lvmvdo(7) for more information about VDO usage.

       --devices PV
	      Restricts the devices that are visible and accessible to the com-
	      mand.  Devices not listed will appear to be missing. This	 option
	      can  be  repeated,  or accepts a comma separated list of devices.
	      This overrides the devices file.

       --devicesfile String
	      A file listing devices that LVM should use.  The file must  exist
	      in  /etc/lvm/devices/  and is managed with the lvmdevices(8) com-
	      mand.  This overrides the lvm.conf(5) devices/devicesfile and de-
	      vices/use_devicesfile settings.

       --discards passdown|nopassdown|ignore
	      Specifies how the device-mapper thin pool	 layer	in  the	 kernel
	      should  handle  discards.	  ignore causes the thin pool to ignore
	      discards.	 nopassdown causes the thin pool  to  process  discards
	      itself  to  allow	 reuse	of  unneeded  extents in the thin pool.
	      passdown causes the thin pool to process	discards  itself  (like
	      nopassdown)  and pass the discards to the underlying device.  See
	      lvmthin(7) for more information.

       --driverloaded y|n
	      If set to no, the command will not attempt to use	 device-mapper.
	      For testing and debugging.

       --errorwhenfull y|n
	      Specifies	 thin pool behavior when data space is exhausted.  When
	      yes, device-mapper will immediately return an error when	a  thin
	      pool is full and an I/O request requires space.  When no, device-
	      mapper  will queue these I/O requests for a period of time to al-
	      low the thin pool to be extended.	  Errors  are  returned	 if  no
	      space  is	 available  after  the timeout.	 (Also see dm-thin-pool
	      kernel module option no_space_timeout.)  See lvmthin(7) for  more
	      information.

       -l|--extents Number[PERCENT]
	      Specifies	 the size of the new LV in logical extents.  The --size
	      and --extents options are alternate methods of  specifying  size.
	      The  total  number  of physical extents used will be greater when
	      redundant data is needed for RAID levels.	  An  alternate	 syntax
	      allows  the  size	 to be determined indirectly as a percentage of
	      the size of a related VG, LV, or set of PVs. The suffix  %VG  de-
	      notes  the  total	 size of the VG, the suffix %FREE the remaining
	      free space in the VG, and the suffix %PVS the free space	in  the
	      specified	 PVs.	For  a snapshot, the size can be expressed as a
	      percentage of the total size of the origin  LV  with  the	 suffix
	      %ORIGIN  (100%ORIGIN  provides space for the whole origin).  When
	      expressed as a percentage, the size defines an  upper  limit  for
	      the  number  of logical extents in the new LV. The precise number
	      of logical extents in the new LV is not determined until the com-
	      mand has completed.

       -h|--help
	      Display help text.

       -K|--ignoreactivationskip
	      Ignore the "activation skip" LV flag during activation  to  allow
	      LVs with the flag set to be activated.

       --ignoremonitoring
	      Do  not interact with dmeventd unless --monitor is specified.  Do
	      not use this if dmeventd is already monitoring a device.

       --integritysettings String
	      Specifies tunable kernel	options	 for  dm-integrity.   See  lvm-
	      raid(7) for more information.

       --journal String
	      Record  information  in the systemd journal.  This information is
	      in addition to information enabled by  the  lvm.conf  log/journal
	      setting.	command: record information about the command.	output:
	      record  the  default  command output.  debug: record full command
	      debugging.

       --lockopt String
	      Used to pass options for special cases  to  lvmlockd.   See  lvm-
	      lockd(8) for more information.

       --longhelp
	      Display long help text.

       -j|--major Number
	      Sets the major number of an LV block device.

       --[raid]maxrecoveryrate Size[k|UNIT]
	      Sets  the maximum recovery rate for a RAID LV.  The rate value is
	      an amount of data per second for each device in the array.   Set-
	      ting  the	 rate  to 0 means it will be unbounded.	 See lvmraid(7)
	      for more information.

       --metadataprofile String
	      The metadata profile  to	use  for  command  configuration.   See
	      lvm.conf(5) for more information about profiles.

       --minor Number
	      Sets the minor number of an LV block device.

       --[raid]minrecoveryrate Size[k|UNIT]
	      Sets  the minimum recovery rate for a RAID LV.  The rate value is
	      an amount of data per second for each device in the array.   Set-
	      ting  the	 rate  to 0 means it will be unbounded.	 See lvmraid(7)
	      for more information.

       --mirrorlog core|disk
	      Specifies the type of mirror log for LVs with the	 "mirror"  type
	      (does  not  apply to the "raid1" type.)  disk is a persistent log
	      and requires a small amount of storage space, usually on a  sepa-
	      rate  device  from  the data being mirrored.  core is not persis-
	      tent; the log is kept only in memory.  In this case,  the	 mirror
	      must be synchronized (by copying LV data from the first device to
	      others)  each  time the LV is activated, e.g. after reboot.  mir-
	      rored is a persistent log that is itself mirrored, but should  be
	      avoided. Instead, use the raid1 type for log redundancy.

       -m|--mirrors Number
	      Specifies the number of mirror images in addition to the original
	      LV  image, e.g. --mirrors 1 means there are two images of the da-
	      ta, the original and one mirror image.   Optional	 positional  PV
	      args  on	the  command  line  can	 specify the devices the images
	      should be placed on.  There are  two  mirroring  implementations:
	      "raid1"  and  "mirror".  These are the names of the corresponding
	      LV types, or "segment types".  Use the --type option  to	specify
	      which  to	 use  (raid1  is  default,  and	 mirror	 is legacy) Use
	      lvm.conf(5) global/mirror_segtype_default and  global/raid10_seg-
	      type_default  to	configure  the default types.  See the --nosync
	      option for avoiding  initial  image  synchronization.   See  lvm-
	      raid(7) for more information.

       --monitor y|n
	      Start  (yes)  or	stop  (no)  monitoring	an  LV	with  dmeventd.
	      dmeventd monitors kernel events for an LV, and performs automated
	      maintenance for the LV  in  response  to	specific  events.   See
	      dmeventd(8) for more information.

       -n|--name String
	      Specifies the name of a new LV.  When unspecified, a default name
	      of "lvol#" is generated, where # is a number generated by LVM.

       --nohints
	      Do  not  use  the hints file to locate devices for PVs. A command
	      may read more devices to find PVs when hints are	not  used.  The
	      command  will still perform standard hint file invalidation where
	      appropriate.

       --nolocking
	      Disable locking. Use with caution, concurrent commands  may  pro-
	      duce incorrect results.

       --nosync
	      Causes  the creation of mirror, raid1, raid4, raid5 and raid10 to
	      skip the initial synchronization. In case of  mirror,  raid1  and
	      raid10,  any  data  written  afterwards will be mirrored, but the
	      original contents will not be copied. In case of raid4 and raid5,
	      no parity blocks will be written, though any data written	 after-
	      wards  will cause parity blocks to be stored.  This is useful for
	      skipping a potentially long and resource intensive  initial  sync
	      of  an empty mirror/raid1/raid4/raid5 and raid10 LV.  This option
	      is not valid for raid6, because raid6 relies on proper parity  (P
	      and  Q Syndromes) being created during initial synchronization in
	      order to reconstruct proper user date in case of device failures.
	      raid0 and raid0_meta do not provide any  data  copies  or	 parity
	      support and thus do not support initial synchronization.

       --noudevsync
	      Disables	udev synchronization. The process will not wait for no-
	      tification from udev. It will continue irrespective of any possi-
	      ble udev processing in the background. Only use this if  udev  is
	      not running or has rules that ignore the devices LVM creates.

       -p|--permission rw|r
	      Set access permission to read only r or read and write rw.

       -M|--persistent y|n
	      When yes, makes the specified minor number persistent.

       --pooldatavdo y|n
	      Use VDO type volume for pool data volume.

       --poolmetadatasize Size[m|UNIT]
	      Specifies the size of the new pool metadata LV.

       --poolmetadataspare y|n
	      Enable  or  disable  the	automatic  creation and management of a
	      spare pool metadata LV in the VG. A spare metadata LV is reserved
	      space that can be used when repairing a pool.

       --profile String
	      An alias for --commandprofile or --metadataprofile, depending  on
	      the command.

       -q|--quiet ...
	      Suppress	output	and  log messages. Overrides --debug and --ver-
	      bose.  Repeat once to also suppress any prompts with answer 'no'.

       --raidintegrity y|n
	      Enable or disable data integrity checksums for raid images.

       --raidintegrityblocksize Number
	      The block size to use for dm-integrity on raid images.   The  in-
	      tegrity  block size should usually match the device logical block
	      size, or the file system block size.  It may  be	less  than  the
	      file  system  block  size,  but  not less than the device logical
	      block size.  Possible values: 512, 1024, 2048, 4096.

       --raidintegritymode String
	      Use a journal (default) or bitmap for keeping integrity checksums
	      consistent in case of a crash. The bitmap areas are  recalculated
	      after  a crash, so corruption in those areas would not be detect-
	      ed.  A journal does not have this problem.  The journal mode dou-
	      bles writes to storage, but can improve performance for scattered
	      writes packed into a single journal write.  bitmap  mode	can  in
	      theory achieve full write throughput of the device, but would not
	      benefit from the potential scattered write optimization.

       -r|--readahead auto|none|Number
	      Sets read ahead sector count of an LV.  auto is the default which
	      allows the kernel to choose a suitable value automatically.  none
	      is equivalent to zero.

       -R|--regionsize Size[m|UNIT]
	      Size  of each raid or mirror synchronization region.  lvm.conf(5)
	      activation/raid_region_size can be used to configure a default.

       --reportformat basic|json|json_std
	      Overrides current output format  for  reports  which  is	defined
	      globally by the report/output_format setting in lvm.conf(5).  ba-
	      sic  is  the  original format with columns and rows.  If there is
	      more than one report per command, each report  is	 prefixed  with
	      the  report  name for identification. json produces report output
	      in JSON format. json_std produces report output  in  JSON	 format
	      which is more compliant with JSON standard.  See lvmreport(7) for
	      more information.

       -k|--setactivationskip y|n
	      Persistently sets (yes) or clears (no) the "activation skip" flag
	      on  an  LV.  An LV with this flag set is not activated unless the
	      --ignoreactivationskip option is used by the activation  command.
	      This  flag  is set by default on new thin snapshot LVs.  The flag
	      is not applied to deactivation.  The current value of the flag is
	      indicated in the lvs lv_attr bits.

       --setautoactivation y|n
	      Set the autoactivation property on a VG or LV.  Display the prop-
	      erty with vgs or lvs "-o autoactivation".	 When  the  autoactiva-
	      tion  property is disabled, the VG or LV will not be activated by
	      a command doing autoactivation (vgchange, lvchange, or pvscan us-
	      ing -aay.)  If autoactivation is disabled on a VG, no LVs will be
	      autoactivated in that VG, and the LV autoactivation property  has
	      no  effect.  If autoactivation is enabled on a VG, autoactivation
	      can be disabled for individual LVs.

       -L|--size Size[m|UNIT]
	      Specifies the size of the new LV.	 The --size and	 --extents  op-
	      tions are alternate methods of specifying size.  The total number
	      of  physical  extents used will be greater when redundant data is
	      needed for RAID levels.

       -s|--snapshot
	      Create a snapshot. Snapshots provide a "frozen image" of an  ori-
	      gin LV.  The snapshot LV can be used, e.g. for backups, while the
	      origin  LV  continues  to	 be used.  This option can create a COW
	      (copy on write) snapshot, or a thin snapshot (in	a  thin	 pool.)
	      Thin  snapshots  are created when the origin is a thin LV and the
	      size option is NOT  specified.  Thin  snapshots  share  the  same
	      blocks  in  the thin pool, and do not allocate new space from the
	      VG.  Thin snapshots are created with the "activation skip"  flag,
	      see --setactivationskip.	A thin snapshot of a non-thin "external
	      origin"  LV  is  created	when a thin pool is specified. Unprovi-
	      sioned blocks in the thin snapshot LV are read from the  external
	      origin  LV.  The	external  origin  LV  must  be	read-only.  See
	      lvmthin(7) for more information about LVM thin provisioning.  COW
	      snapshots are created when a size is specified. The size is allo-
	      cated from space in the VG, and is the amount of space  that  can
	      be  used	for  saving COW blocks as writes occur to the origin or
	      snapshot.	 The size chosen  should  depend  upon	the  amount  of
	      writes  that  are expected; often 20% of the origin LV is enough.
	      If COW space runs low, it can be extended with lvextend  (shrink-
	      ing  is  also  allowed with lvreduce.)  A small amount of the COW
	      snapshot LV size is used to track COW  block  locations,	so  the
	      full size is not available for COW data blocks.  Use lvs to check
	      how much space is used, and see --monitor to to automatically ex-
	      tend the size to avoid running out of space.

       -i|--stripes Number
	      Specifies the number of stripes in a striped LV. This is the num-
	      ber  of  PVs  (devices)  that a striped LV is spread across. Data
	      that appears sequential in the LV is spread across  multiple  de-
	      vices  in	 units of the stripe size (see --stripesize). This does
	      not change existing allocated space, but only  applies  to  space
	      being  allocated	by the command.	 When creating a RAID 4/5/6 LV,
	      this number does not include the extra devices that are  required
	      for  parity.  The largest number depends on the RAID type (raid0:
	      64, raid10: 32, raid4/5: 63, raid6: 62),	and  when  unspecified,
	      the  default  depends  on	 the  RAID  type  (raid0: 2, raid10: 2,
	      raid4/5: 3, raid6: 5.)  To stripe a new raid LV across all PVs by
	      default, see lvm.conf(5) allocation/raid_stripe_all_devices.

       -I|--stripesize Size[k|UNIT]
	      The amount of data that is written to one device before moving to
	      the next in a striped LV.

       -t|--test
	      Run in test mode. Commands will not update metadata.  This is im-
	      plemented by disabling all metadata writing but nevertheless  re-
	      turning success to the calling function. This may lead to unusual
	      error  messages  in  multi-stage	operations  if a tool relies on
	      reading back metadata it believes has changed but hasn't.

       -T|--thin
	      Specifies the command is handling a thin LV or  thin  pool.   See
	      --type thin, --type thin-pool, and --virtualsize.	 See lvmthin(7)
	      for more information about LVM thin provisioning.

       --thinpool LV
	      The name of a thin pool LV.

       --type  linear|striped|snapshot|raid|mirror|thin|thin-pool|vdo|vdo-pool|
	      cache|cache-pool|writecache
	      The LV type, also known as "segment type" or "segtype".  See  us-
	      age  descriptions	 for the specific ways to use these types.  For
	      more information about redundancy and performance (raid<N>,  mir-
	      ror,  striped,  linear)  see  lvmraid(7).	  For thin provisioning
	      (thin,  thin-pool)  see  lvmthin(7).   For  performance	caching
	      (cache, cache-pool) see lvmcache(7).  For copy-on-write snapshots
	      (snapshot)  see  usage definitions.  For VDO (vdo) see lvmvdo(7).
	      Several commands omit an explicit type option because the type is
	      inferred from other options or shortcuts (e.g. --stripes,	 --mir-
	      rors,  --snapshot,  --virtualsize,  --thin, --cache, --vdo).  Use
	      inferred types with care because it can lead  to	unexpected  re-
	      sults.

       --vdo
	      Specifies	 the  command is handling VDO LV.  See --type vdo.  See
	      lvmvdo(7) for more information about VDO usage.

       --vdopool LV
	      The name of a VDO pool LV.  See lvmvdo(7)	 for  more  information
	      about VDO usage.

       --vdosettings String
	      Specifies	 tunable  VDO  options	for VDO LVs.  Use the form 'op-
	      tion=value' or 'option1=value option2=value', or repeat --vdoset-
	      tings for each option being set.	These settings override the de-
	      fault VDO behaviors.  To remove vdosettings and revert to the de-
	      fault VDO behaviors, use --vdosettings 'default'.	 See  lvmvdo(7)
	      for more information.

       -v|--verbose ...
	      Set  verbose  level. Repeat from 1 to 4 times to increase the de-
	      tail of messages sent to stdout and stderr.

       --version
	      Display version information.

       -V|--virtualsize Size[m|UNIT]
	      The virtual size of a new thin LV.  See lvmthin(7) for  more  in-
	      formation	 about	LVM thin provisioning.	Using virtual size (-V)
	      and actual size (-L) together creates a sparse  LV.   lvm.conf(5)
	      global/sparse_segtype_default determines the default segment type
	      used to create a sparse LV.  Anything written to a sparse LV will
	      be  returned  when  reading from it.  Reading from other areas of
	      the LV will return blocks of zeros.  When	 using	a  snapshot  to
	      create  a sparse LV, a hidden virtual device is created using the
	      zero target, and the LV has the suffix _vorigin.	 Snapshots  are
	      less  efficient than thin provisioning when creating large sparse
	      LVs (GiB).

       -W|--wipesignatures y|n
	      Controls detection and subsequent wiping	of  signatures	on  new
	      LVs.   There  is	a prompt for each signature detected to confirm
	      its wiping (unless --yes	is  used  to  override	confirmations.)
	      When not specified, signatures are wiped whenever zeroing is done
	      (see  --zero).  This behaviour can be configured with lvm.conf(5)
	      allocation/wipe_signatures_when_zeroing_new_lvs.	If blkid wiping
	      is used (lvm.conf(5) allocation/use_blkid_wiping) and LVM is com-
	      piled with blkid wiping support, then  the  blkid(8)  library  is
	      used  to	detect	the signatures (use blkid -k to list the signa-
	      tures that are recognized).  Otherwise, native LVM code  is  used
	      to  detect signatures (only MD RAID, swap and LUKS signatures are
	      detected in this case.)  The LV is not wiped  if	the  read  only
	      flag is set.

       -y|--yes
	      Do  not  prompt  for confirmation interactively but always assume
	      the answer yes. Use with extreme caution.	 (For automatic no, see
	      -qq.)

       -Z|--zero y|n
	      Controls zeroing of the first 4 KiB of data in the new  LV.   De-
	      fault  is	 y.   Snapshot COW volumes are always zeroed.  For thin
	      pools, this controls zeroing of provisioned blocks.   LV	is  not
	      zeroed if the read only flag is set.  Warning: trying to mount an
	      unzeroed LV can cause the system to hang.

VARIABLES
       VG     Volume  Group  name.   See lvm(8) for valid names.  For lvcreate,
	      the required VG positional arg may be omitted when the VG name is
	      included in another option, e.g. --name VG/LV.

       LV     Logical Volume name.  See lvm(8) for valid names.	  An  LV  posi-
	      tional  arg  generally  includes	the  VG	 name and LV name, e.g.
	      VG/LV.  LV1 indicates the LV must have a specific type, where the
	      accepted LV types are listed. (raid represents raid<N> type).

       PV     Physical Volume name, a device path  under  /dev.	  For  commands
	      managing	physical extents, a PV positional arg generally accepts
	      a suffix indicating a range (or multiple ranges) of physical  ex-
	      tents  (PEs).  When  the	first PE is omitted, it defaults to the
	      start of the device, and when the last PE is omitted it  defaults
	      to  end.	 Start	and end range (inclusive): PV[:PE-PE]...  Start
	      and length range (counting from 0): PV[:PE+PE]...

       String See the option description for information about the string  con-
	      tent.

       Size[UNIT]
	      Size  is	an  input  number that accepts an optional unit.  Input
	      units are always treated as base two values, regardless of  capi-
	      talization, e.g. 'k' and 'K' both refer to 1024.	The default in-
	      put  unit is specified by letter, followed by |UNIT.  UNIT repre-
	      sents other possible input units: b|B is bytes, s|S is sectors of
	      512 bytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is
	      PiB, e|E is EiB.	(This should not be confused  with  the	 output
	      control --units, where capital letters mean multiple of 1000.)

ENVIRONMENT VARIABLES
       See lvm(8) for information about environment variables used by lvm.  For
       example,	 LVM_VG_NAME can generally be substituted for a required VG pa-
       rameter.

ADVANCED USAGE
       Alternate command forms, advanced command  usage,  and  listing	of  all
       valid syntax for completeness.

       Create an LV that returns errors when used.

       lvcreate --type error -L|--size Size[m|UNIT] VG
	   [ -l|--extents Number[PERCENT] ]
	   [ COMMON_OPTIONS ]

       --

       Create an LV that returns zeros when read.

       lvcreate --type zero -L|--size Size[m|UNIT] VG
	   [ -l|--extents Number[PERCENT] ]
	   [ COMMON_OPTIONS ]

       --

       Create a linear LV.

       lvcreate --type linear -L|--size Size[m|UNIT] VG
	   [ -l|--extents Number[PERCENT] ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

       Create a striped LV (also see lvcreate --stripes).

       lvcreate --type striped -L|--size Size[m|UNIT] VG
	   [ -l|--extents Number[PERCENT] ]
	   [ -i|--stripes Number ]
	   [ -I|--stripesize Size[k|UNIT] ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

       Create a mirror LV (also see --type raid1).

       lvcreate --type mirror -L|--size Size[m|UNIT] VG
	   [ -l|--extents Number[PERCENT] ]
	   [ -i|--stripes Number ]
	   [ -I|--stripesize Size[k|UNIT] ]
	   [ -m|--mirrors Number ]
	   [ -R|--regionsize Size[m|UNIT] ]
	   [	--mirrorlog core|disk ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

       Create a COW snapshot LV of an origin LV
       (also see --snapshot).

       lvcreate --type snapshot -L|--size Size[m|UNIT] LV
	   [ -l|--extents Number[PERCENT] ]
	   [ -s|--snapshot ]
	   [ -i|--stripes Number ]
	   [ -I|--stripesize Size[k|UNIT] ]
	   [ -c|--chunksize Size[k|UNIT] ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

       Create a sparse COW snapshot LV of a virtual origin LV
       (also see --snapshot).

       lvcreate --type snapshot -L|--size Size[m|UNIT]
	     -V|--virtualsize Size[m|UNIT] VG
	   [ -l|--extents Number[PERCENT] ]
	   [ -s|--snapshot ]
	   [ -c|--chunksize Size[k|UNIT] ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

       Create a thin pool.

       lvcreate -T|--thin -L|--size Size[m|UNIT] VG
	   [ --type thin-pool ] (implied) [ -l|--extents Number[PERCENT] ]
	   [ -i|--stripes Number ]
	   [ -I|--stripesize Size[k|UNIT] ]
	   [ -c|--chunksize Size[k|UNIT] ]
	   [	--discards passdown|nopassdown|ignore ]
	   [	--errorwhenfull y|n ]
	   [	--pooldatavdo y|n ]
	   [	--compression y|n ]
	   [	--deduplication y|n ]
	   [	--vdosettings String ]
	   [	--poolmetadatasize Size[m|UNIT] ]
	   [	--poolmetadataspare y|n ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

       Create a thin pool named in --thinpool.

       lvcreate -L|--size Size[m|UNIT] --thinpool LV_new VG
	   [ --type thin-pool ] (implied) [ -l|--extents Number[PERCENT] ]
	   [ -i|--stripes Number ]
	   [ -I|--stripesize Size[k|UNIT] ]
	   [ -T|--thin ]
	   [ -c|--chunksize Size[k|UNIT] ]
	   [	--discards passdown|nopassdown|ignore ]
	   [	--errorwhenfull y|n ]
	   [	--pooldatavdo y|n ]
	   [	--compression y|n ]
	   [	--deduplication y|n ]
	   [	--vdosettings String ]
	   [	--poolmetadatasize Size[m|UNIT] ]
	   [	--poolmetadataspare y|n ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

       Create a cache pool named by the --cachepool arg
       (variant, uses --cachepool in place of --name).

       lvcreate --type cache-pool -L|--size Size[m|UNIT]
	     --cachepool LV_new VG
	   [ -l|--extents Number[PERCENT] ]
	   [ -i|--stripes Number ]
	   [ -I|--stripesize Size[k|UNIT] ]
	   [ -H|--cache ]
	   [ -c|--chunksize Size[k|UNIT] ]
	   [	--cachemode writethrough|writeback|passthrough ]
	   [	--cachepolicy String ]
	   [	--cachesettings String ]
	   [	--cachemetadataformat auto|1|2 ]
	   [	--poolmetadatasize Size[m|UNIT] ]
	   [	--poolmetadataspare y|n ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

       Create a thin LV in a thin pool.

       lvcreate --type thin -V|--virtualsize Size[m|UNIT]
	     --thinpool LV VG
	   [ -T|--thin ]
	   [ COMMON_OPTIONS ]

       --

       Create a thin LV in a thin pool named in the first arg
       (variant, also see --thinpool for naming pool).

       lvcreate --type thin -V|--virtualsize Size[m|UNIT] LV1
	   [ -T|--thin ]
	   [ COMMON_OPTIONS ]

	   LV1 types: thinpool

       --

       Create a thin LV in the thin pool named in the first arg
       (also see --thinpool for naming pool.)

       lvcreate -V|--virtualsize Size[m|UNIT] LV1
	   [ --type thin ] (implied)
	   [ -T|--thin ]
	   [ COMMON_OPTIONS ]

	   LV1 types: thinpool

       --

       Create a thin LV that is a snapshot of an existing thin LV.

       lvcreate --type thin LV1
	   [ -T|--thin ]
	   [ -s|--snapshot ]
	   [ COMMON_OPTIONS ]

	   LV1 types: thin

       --

       Create a thin LV that is a snapshot of an existing thin LV.

       lvcreate -T|--thin LV1
	   [ --type thin ] (implied)
	   [ -s|--snapshot ]
	   [ COMMON_OPTIONS ]

	   LV1 types: thin

       --

       Create a thin LV that is a snapshot of an external origin LV.

       lvcreate -s|--snapshot --thinpool LV LV
	   [ --type thin ] (implied)
	   [ COMMON_OPTIONS ]

       --

       Create a VDO LV with VDO pool.

       lvcreate --vdo -L|--size Size[m|UNIT] VG
	   [ --type vdo ] (implied) [ -l|--extents Number[PERCENT] ]
	   [ -i|--stripes Number ]
	   [ -I|--stripesize Size[k|UNIT] ]
	   [ -V|--virtualsize Size[m|UNIT] ]
	   [	--vdopool LV_new ]
	   [	--compression y|n ]
	   [	--deduplication y|n ]
	   [	--vdosettings String ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

       Create a VDO LV with VDO pool.

       lvcreate --vdopool LV_new -L|--size Size[m|UNIT] VG
	   [ --type vdo ] (implied) [ -l|--extents Number[PERCENT] ]
	   [ -i|--stripes Number ]
	   [ -I|--stripesize Size[k|UNIT] ]
	   [ -V|--virtualsize Size[m|UNIT] ]
	   [	--compression y|n ]
	   [	--deduplication y|n ]
	   [	--vdosettings String ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

       Create a thin LV, first creating a thin pool for it,
       where the new thin pool is named by the --thinpool arg.

       lvcreate --type thin -V|--virtualsize Size[m|UNIT]
	     -L|--size Size[m|UNIT] --thinpool LV_new VG
	   [ -l|--extents Number[PERCENT] ]
	   [ -i|--stripes Number ]
	   [ -I|--stripesize Size[k|UNIT] ]
	   [ -T|--thin ]
	   [ -c|--chunksize Size[k|UNIT] ]
	   [	--discards passdown|nopassdown|ignore ]
	   [	--errorwhenfull y|n ]
	   [	--pooldatavdo y|n ]
	   [	--compression y|n ]
	   [	--deduplication y|n ]
	   [	--vdosettings String ]
	   [	--poolmetadatasize Size[m|UNIT] ]
	   [	--poolmetadataspare y|n ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

       Create a thin LV, first creating a thin pool for it,
       where the new thin pool is named by --thinpool.

       lvcreate -V|--virtualsize Size[m|UNIT] -L|--size Size[m|UNIT]
	     --thinpool LV_new VG
	   [ --type thin ] (implied) [ -l|--extents Number[PERCENT] ]
	   [ -i|--stripes Number ]
	   [ -I|--stripesize Size[k|UNIT] ]
	   [ -T|--thin ]
	   [ -c|--chunksize Size[k|UNIT] ]
	   [	--discards passdown|nopassdown|ignore ]
	   [	--errorwhenfull y|n ]
	   [	--pooldatavdo y|n ]
	   [	--compression y|n ]
	   [	--deduplication y|n ]
	   [	--vdosettings String ]
	   [	--poolmetadatasize Size[m|UNIT] ]
	   [	--poolmetadataspare y|n ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

       Create a thin LV, first creating a thin pool for it,
       where the new thin pool is named in the first arg,
       or the new thin pool name is generated when the first
       arg is a VG name.

       lvcreate --type thin -V|--virtualsize Size[m|UNIT]
	     -L|--size Size[m|UNIT] VG|LV_new
	   [ -l|--extents Number[PERCENT] ]
	   [ -i|--stripes Number ]
	   [ -I|--stripesize Size[k|UNIT] ]
	   [ -T|--thin ]
	   [ -c|--chunksize Size[k|UNIT] ]
	   [	--discards passdown|nopassdown|ignore ]
	   [	--errorwhenfull y|n ]
	   [	--pooldatavdo y|n ]
	   [	--compression y|n ]
	   [	--deduplication y|n ]
	   [	--vdosettings String ]
	   [	--poolmetadatasize Size[m|UNIT] ]
	   [	--poolmetadataspare y|n ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

       Create a thin LV, first creating a thin pool for it,
       where the new thin pool is named in the first arg,
       or the new thin pool name is generated when the first
       arg is a VG name.

       lvcreate -T|--thin -V|--virtualsize Size[m|UNIT]
	     -L|--size Size[m|UNIT] VG|LV_new
	   [ --type thin ] (implied) [ -l|--extents Number[PERCENT] ]
	   [ -i|--stripes Number ]
	   [ -I|--stripesize Size[k|UNIT] ]
	   [ -c|--chunksize Size[k|UNIT] ]
	   [	--discards passdown|nopassdown|ignore ]
	   [	--errorwhenfull y|n ]
	   [	--pooldatavdo y|n ]
	   [	--compression y|n ]
	   [	--deduplication y|n ]
	   [	--vdosettings String ]
	   [	--poolmetadatasize Size[m|UNIT] ]
	   [	--poolmetadataspare y|n ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

       Create a thin LV, first creating a thin pool for it.
       Create a sparse snapshot of a virtual origin LV
       Chooses type thin or snapshot according to
       config setting sparse_segtype_default.

       lvcreate -L|--size Size[m|UNIT] -V|--virtualsize Size[m|UNIT] VG
	   [ --type thin|snapshot ] (implied) [ -l|--extents Number[PERCENT] ]
	   [ -i|--stripes Number ]
	   [ -I|--stripesize Size[k|UNIT] ]
	   [ -s|--snapshot ]
	   [ -T|--thin ]
	   [ -c|--chunksize Size[k|UNIT] ]
	   [	--discards passdown|nopassdown|ignore ]
	   [	--errorwhenfull y|n ]
	   [	--pooldatavdo y|n ]
	   [	--compression y|n ]
	   [	--deduplication y|n ]
	   [	--vdosettings String ]
	   [	--poolmetadatasize Size[m|UNIT] ]
	   [	--poolmetadataspare y|n ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

       Create a new LV, then attach the specified cachepool
       which converts the new LV to type cache.

       lvcreate -L|--size Size[m|UNIT] --cachepool LV VG
	   [ --type cache ] (implied) [ -l|--extents Number[PERCENT] ]
	   [ -i|--stripes Number ]
	   [ -I|--stripesize Size[k|UNIT] ]
	   [ -H|--cache ]
	   [ -c|--chunksize Size[k|UNIT] ]
	   [	--cachemode writethrough|writeback|passthrough ]
	   [	--cachepolicy String ]
	   [	--cachesettings String ]
	   [	--cachemetadataformat auto|1|2 ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

       Create a new LV, then attach the specified cachepool
       which converts the new LV to type cache.
       (variant, also use --cachepool).

       lvcreate --type cache -L|--size Size[m|UNIT] LV1
	   [ -l|--extents Number[PERCENT] ]
	   [ -i|--stripes Number ]
	   [ -I|--stripesize Size[k|UNIT] ]
	   [ -H|--cache ]
	   [ -c|--chunksize Size[k|UNIT] ]
	   [	--cachemode writethrough|writeback|passthrough ]
	   [	--cachepolicy String ]
	   [	--cachesettings String ]
	   [	--cachemetadataformat auto|1|2 ]
	   [	--poolmetadatasize Size[m|UNIT] ]
	   [	--poolmetadataspare y|n ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

	   LV1 types: cachepool

       --

       When the LV arg is a cachepool, then create a new LV and
       attach the cachepool arg to it.
       (variant, use --type cache and --cachepool.)
       When the LV arg is not a cachepool, then create a new cachepool
       and attach it to the LV arg (alternative, use lvconvert.)

       lvcreate -H|--cache -L|--size Size[m|UNIT] LV
	   [ --type cache ] (implied) [ -l|--extents Number[PERCENT] ]
	   [ -c|--chunksize Size[k|UNIT] ]
	   [ -i|--stripes Number ]
	   [ -I|--stripesize Size[k|UNIT] ]
	   [	--cachemode writethrough|writeback|passthrough ]
	   [	--cachepolicy String ]
	   [	--cachesettings String ]
	   [	--cachemetadataformat auto|1|2 ]
	   [	--poolmetadatasize Size[m|UNIT] ]
	   [	--poolmetadataspare y|n ]
	   [ COMMON_OPTIONS ]
	   [ PV ... ]

       --

EXAMPLES
       Create a striped LV with 3 stripes, a stripe size of 8 KiB and a size of
       100 MiB.	 The LV name is chosen by lvcreate.
       lvcreate -i 3 -I 8 -L 100m vg00

       Create  a  raid1	 LV with two images, and a usable size of 500 MiB. This
       operation requires two devices, one for each mirror image. RAID metadata
       (superblock and bitmap) is also included on the two devices.
       lvcreate --type raid1 -m1 -L 500m -n mylv vg00

       Create a mirror LV with two images, and a usable size of 500 MiB.   This
       operation  requires  three  devices: two for mirror images and one for a
       disk log.
       lvcreate --type mirror -m1 -L 500m -n mylv vg00

       Create a mirror LV with 2 images, and a usable size of  500  MiB.   This
       operation requires 2 devices because the log is in memory.
       lvcreate --type mirror -m1 --mirrorlog core -L 500m -n mylv vg00

       Create a copy-on-write snapshot of an LV:
       lvcreate --snapshot --size 100m --name mysnap vg00/mylv

       Create  a  copy-on-write snapshot with a size sufficient for overwriting
       20% of the size of the original LV.
       lvcreate -s -l 20%ORIGIN -n mysnap vg00/mylv

       Create a sparse LV with 1 TiB of virtual space, and  actual  space  just
       under 100 MiB.
       lvcreate --snapshot --virtualsize 1t --size 100m --name mylv vg00

       Create a linear LV with a usable size of 64 MiB on specific physical ex-
       tents.
       lvcreate -L 64m -n mylv vg00 /dev/sda:0-7 /dev/sdb:0-7

       Create  a RAID5 LV with a usable size of 5 GiB, 3 stripes, a stripe size
       of 64 KiB, using a total of 4 devices (including one for parity).
       lvcreate --type raid5 -L 5G -i 3 -I 64 -n mylv vg00

       Create a RAID5 LV using all of the free space in the VG and spanning all
       the PVs in the VG (note that the command will fail  if  there  are  more
       than 8 PVs in the VG, in which case -i 7 must be used to get to the cur-
       rent maximum of 8 devices including parity for RaidLVs).
       lvcreate	 --config  allocation/raid_stripe_all_devices=1 --type raid5 -l
	      100%FREE -n mylv vg00

       Create RAID10 LV with a usable size of 5 GiB, using 2 stripes, each on a
       two-image mirror. (Note that the -i and -m arguments behave differently:
       -i specifies the total number of stripes, but -m specifies the number of
       images in addition to the first image).
       lvcreate --type raid10 -L 5G -i 2 -m 1 -n mylv vg00

       Create a 1 TiB thin LV mythin, with 256 GiB thinpool tpool0 in vg00.
       lvcreate -T -V 1T --size 256G --name mythin vg00/tpool0

       Create a 1 TiB thin LV, first creating a new thin pool for it, where the
       thin pool has 100 MiB of space, uses 2 stripes,	has  a	64  KiB	 stripe
       size, and 256 KiB chunk size.
       lvcreate --type thin --name mylv --thinpool mypool -V 1t -L 100m -i 2 -I
	      64 -c 256 vg00

       Create  a  thin snapshot of a thin LV (the size option must not be used,
       otherwise a copy-on-write snapshot would be created).
       lvcreate --snapshot --name mysnap vg00/thinvol

       Create a thin snapshot of the read-only inactive LV named "origin" which
       becomes an external origin for the thin snapshot LV.
       lvcreate --snapshot --name mysnap --thinpool mypool vg00/origin

       Create a cache pool from a fast physical device. The cache pool can then
       be used to cache an LV.
       lvcreate --type cache-pool -L 1G -n my_cpool vg00 /dev/fast1

       Create a cache LV, first creating a new origin LV on a slow physical de-
       vice, then combining the new origin LV with an existing cache pool.
       lvcreate	 --type	 cache	--cachepool  my_cpool  -L  100G	 -n  mylv  vg00
	      /dev/slow1

       Create a VDO LV vdo0 with VDOPoolLV size of 10 GiB and name vpool1.
       lvcreate --vdo --size 10G --name vdo0 vg00/vpool1

SEE ALSO
       lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),

       pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8),
       pvresize(8), pvs(8), pvscan(8),

       vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8),
       vgconvert(8), vgdisplay(8), vgexport(8), vgextend(8), vgimport(8),
       vgimportclone(8), vgimportdevices(8), vgmerge(8), vgmknodes(8),
       vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8),

       lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8),
       lvreduce(8), lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8),

       lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),

       dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8),
       lvmdbusd(8), fsadm(8),

       lvmsystemid(7), lvmreport(7), lvmcache(7), lvmraid(7), lvmthin(7),
       lvmvdo(7), lvmautoactivation(7)

Red Hat, Inc.	       LVM TOOLS 2.03.31(2) (2025-02-27)	    LVCREATE(8)