search..
No manual entry for -- in section 8
LVCHANGE(8)		    System Manager's Manual		    LVCHANGE(8)

NAME
       lvchange -- Change the attributes of logical volume(s)

SYNOPSIS
       lvchange option_args position_args
	   [ option_args ]

	-a|--activate y|n|ay
	   --activationmode partial|degraded|complete
	   --addtag Tag
	   --alloc contiguous|cling|cling_by_tags|normal|anywhere|inherit
	-A|--autobackup y|n
	   --cachemode writethrough|writeback|passthrough
	   --cachepolicy String
	   --cachesettings String
	   --commandprofile String
	   --compression y|n
	   --config String
	-C|--contiguous y|n
	-d|--debug
	   --deduplication y|n
	   --deltag Tag
	   --detachprofile
	   --devices PV
	   --devicesfile String
	   --discards passdown|nopassdown|ignore
	   --driverloaded y|n
	   --errorwhenfull y|n
	-f|--force
	-h|--help
	-K|--ignoreactivationskip
	   --ignorelockingfailure
	   --ignoremonitoring
	   --integritysettings String
	   --journal String
	   --lockopt String
	   --longhelp
	-j|--major Number
	   --[raid]maxrecoveryrate Size[k|UNIT]
	   --metadataprofile String
	   --minor Number
	   --[raid]minrecoveryrate Size[k|UNIT]
	   --monitor y|n
	   --nohints
	   --nolocking
	   --noudevsync
	-P|--partial
	-p|--permission rw|r
	-M|--persistent y|n
	   --poll y|n
	   --profile String
	-q|--quiet
	-r|--readahead auto|none|Number
	   --readonly
	   --rebuild PV
	   --refresh
	   --reportformat basic|json|json_std
	   --resync
	-S|--select String
	-k|--setactivationskip y|n
	   --setautoactivation y|n
	   --[raid]syncaction check|repair
	   --sysinit
	-t|--test
	   --vdosettings String
	-v|--verbose
	   --version
	   --[raid]writebehind Number
	   --[raid]writemostly PV[:t|n|y]
	-y|--yes
	-Z|--zero y|n

DESCRIPTION
       lvchange	 changes  LV attributes in the VG, changes LV activation in the
       kernel, and includes other utilities for LV maintenance.

USAGE
       Change a general LV attribute.
       For options listed in parentheses, any one is
       required, after which the others are optional.

       lvchange
	   ( -C|--contiguous y|n
	     -p|--permission rw|r
	     -r|--readahead auto|none|Number
	     -k|--setactivationskip y|n
	     -Z|--zero y|n
	     -M|--persistent n
		--addtag Tag
		--deltag Tag
		--alloc contiguous|cling|cling_by_tags|normal|anywhere|inherit
		--compression y|n
		--deduplication y|n
		--detachprofile
		--metadataprofile String
		--profile String
		--setautoactivation y|n
		--errorwhenfull y|n
		--discards passdown|nopassdown|ignore
		--cachemode writethrough|writeback|passthrough
		--cachepolicy String
		--cachesettings String
		--[raid]minrecoveryrate Size[k|UNIT]
		--[raid]maxrecoveryrate Size[k|UNIT]
		--vdosettings String
		--integritysettings String
		--[raid]writebehind Number
		--[raid]writemostly PV[:t|n|y] )
	    VG|LV|Tag|Select ...
	   [ -a|--activate y|n|ay ]
	   [	--poll y|n ]
	   [	--monitor y|n ]
	   [ COMMON_OPTIONS ]

       --

       Resynchronize a mirror or raid LV.
       Use to reset 'R' attribute on a not initially synchronized LV.

       lvchange --resync VG|LV1|Tag|Select ...
	   [ -a|--activate y|n|ay ]
	   [ COMMON_OPTIONS ]

	   LV1 types: mirror raid

       --

       Resynchronize or check a raid LV.

       lvchange --[raid]syncaction check|repair VG|LV1|Tag|Select ...
	   [ COMMON_OPTIONS ]

	   LV1 types: raid

       --

       Reconstruct data on specific PVs of a raid LV.

       lvchange --rebuild PV VG|LV1|Tag|Select ...
	   [ COMMON_OPTIONS ]

	   LV1 types: raid

       --

       Activate or deactivate an LV.

       lvchange -a|--activate y|n|ay VG|LV|Tag|Select ...
	   [ -P|--partial ]
	   [ -K|--ignoreactivationskip ]
	   [	--activationmode partial|degraded|complete ]
	   [	--poll y|n ]
	   [	--monitor y|n ]
	   [	--ignorelockingfailure ]
	   [	--sysinit ]
	   [	--readonly ]
	   [ COMMON_OPTIONS ]

       --

       Reactivate an LV using the latest metadata.

       lvchange --refresh VG|LV|Tag|Select ...
	   [ -P|--partial ]
	   [	--activationmode partial|degraded|complete ]
	   [	--poll y|n ]
	   [	--monitor y|n ]
	   [ COMMON_OPTIONS ]

       --

       Start or stop monitoring an LV from dmeventd.

       lvchange --monitor y|n VG|LV|Tag|Select ...
	   [ COMMON_OPTIONS ]

       --

       Start or stop processing an LV conversion.

       lvchange --poll y|n VG|LV|Tag|Select ...
	   [	--monitor y|n ]
	   [ COMMON_OPTIONS ]

       --

       Make the minor device number persistent for an LV.

       lvchange -M|--persistent y --minor Number LV
	   [ -j|--major Number ]
	   [ -a|--activate y|n|ay ]
	   [	--poll y|n ]
	   [	--monitor y|n ]
	   [ COMMON_OPTIONS ]

       --

       Common options for command:
	   [ -A|--autobackup y|n ]
	   [ -f|--force ]
	   [ -S|--select String ]
	   [	--ignoremonitoring ]
	   [	--noudevsync ]
	   [	--reportformat basic|json|json_std ]

       Common options for lvm:
	   [ -d|--debug ]
	   [ -h|--help ]
	   [ -q|--quiet ]
	   [ -t|--test ]
	   [ -v|--verbose ]
	   [ -y|--yes ]
	   [	--commandprofile String ]
	   [	--config String ]
	   [	--devices PV ]
	   [	--devicesfile String ]
	   [	--driverloaded y|n ]
	   [	--journal String ]
	   [	--lockopt String ]
	   [	--longhelp ]
	   [	--nohints ]
	   [	--nolocking ]
	   [	--profile String ]
	   [	--version ]

OPTIONS

       -a|--activate y|n|ay
	      Change the active state of LVs.  An active LV can be used through
	      a block device, allowing data on the LV to be accessed.  y  makes
	      LVs  active, or available.  n makes LVs inactive, or unavailable.
	      The block device for the LV is added or removed from  the	 system
	      using  device-mapper  in	the  kernel.   A symbolic link /dev/VG-
	      Name/LVName pointing to the device node  is  also	 added/removed.
	      All  software  and  scripts  should access the device through the
	      symbolic link and present this as the name of  the  device.   The
	      location and name of the underlying device node may depend on the
	      distribution,  configuration (e.g. udev), or release version.  ay
	      specifies autoactivation, which is used by system-generated acti-
	      vation commands. By default, LVs are autoactivated.  An autoacti-
	      vation property can be set on a VG or LV to  disable  autoactiva-
	      tion,  see  --setautoactivation y|n in vgchange, lvchange, vgcre-
	      ate, and lvcreate.  Display the property with vgs or lvs "-o  au-
	      toactivation".   The  lvm.conf(5) auto_activation_volume_list in-
	      cludes names of VGs or LVs that should be autoactivated, and any-
	      thing not listed is not autoactivated.  When auto_activation_vol-
	      ume_list is undefined (the default), it has no  effect.	If  au-
	      to_activation_volume_list	 is  defined  and empty, no LVs are au-
	      toactivated.  Items included by auto_activation_volume_list  will
	      not be autoactivated if the autoactivation property has been dis-
	      abled.  See lvmlockd(8) for more information about activation op-
	      tions ey and sy for shared VGs.

       --activationmode partial|degraded|complete
	      Determines if LV activation is allowed when PVs are missing, e.g.
	      because  of  a  device failure.  complete only allows LVs with no
	      missing PVs to be activated, and is the  most  restrictive  mode.
	      degraded allows RAID LVs with missing PVs to be activated.  (This
	      does  not	 include the "mirror" type, see "raid1" instead.)  par-
	      tial allows any LV with missing PVs to be activated,  and	 should
	      only   be	  used	for  recovery  or  repair.   For  default,  see
	      lvm.conf(5) activation_mode.  See lvmraid(7)  for	 more  informa-
	      tion.

       --addtag Tag
	      Adds  a tag to a PV, VG or LV. This option can be repeated to add
	      multiple tags at once. See lvm(8) for information about tags.

       --alloc contiguous|cling|cling_by_tags|normal|anywhere|inherit
	      Determines the allocation policy when a command needs to allocate
	      Physical Extents (PEs) from the VG. Each VG and LV has an alloca-
	      tion policy which can be changed with vgchange/lvchange, or over-
	      ridden on the command line.  normal applies  common  sense  rules
	      such as not placing parallel stripes on the same PV.  inherit ap-
	      plies  the  VG  policy  to an LV.	 contiguous requires new PEs be
	      placed adjacent to existing PEs.	cling places  new  PEs	on  the
	      same  PV	as existing PEs in the same stripe of the LV.  If there
	      are sufficient PEs for an allocation, but	 normal	 does  not  use
	      them, anywhere will use them even if it reduces performance, e.g.
	      by  placing  two	stripes on the same PV.	 Optional positional PV
	      args on the command line can also be used to limit which PVs  the
	      command will use for allocation.	See lvm(8) for more information
	      about allocation.

       -A|--autobackup y|n
	      Specifies	 if  metadata should be backed up automatically after a
	      change.  Enabling this is strongly advised!   See	 vgcfgbackup(8)
	      for more information.

       --cachemode writethrough|writeback|passthrough
	      Specifies	 when  writes  to  a cache LV should be considered com-
	      plete.  writeback considers a write complete as  soon  as	 it  is
	      stored in the cache pool.	 writethough considers a write complete
	      only  when  it  has been stored in both the cache pool and on the
	      origin LV.  While writethrough may be slower for	writes,	 it  is
	      more  resilient if something should happen to a device associated
	      with the cache pool LV. With passthrough, all  reads  are	 served
	      from  the origin LV (all reads miss the cache) and all writes are
	      forwarded to the origin LV; additionally, write hits cause  cache
	      block invalidates. See lvmcache(7) for more information.

       --cachepolicy String
	      Specifies	 the  cache policy for a cache LV.  See lvmcache(7) for
	      more information.

       --cachesettings String
	      Specifies tunable kernel options for  dm-cache  or  dm-writecache
	      LVs.   Use the form 'option=value' or 'option1=value option2=val-
	      ue', or repeat --cachesettings for each option being set.	  These
	      settings	override the default kernel behaviors which are usually
	      adequate. To remove cachesettings and revert to the default  ker-
	      nel  behaviors,  use --cachesettings 'default' for dm-cache or an
	      empty string --cachesettings  ''	for  dm-writecache.   See  lvm-
	      cache(7) for more information.

       --commandprofile String
	      The  command  profile  to	 use  for  command  configuration.  See
	      lvm.conf(5) for more information about profiles.

       --compression y|n
	      Controls whether compression is enabled or disable for  VDO  vol-
	      ume.  See lvmvdo(7) for more information about VDO usage.

       --config String
	      Config  settings for the command. These override lvm.conf(5) set-
	      tings.  The String arg uses the same format  as  lvm.conf(5),  or
	      may  use section/field syntax.  See lvm.conf(5) for more informa-
	      tion about config.

       -C|--contiguous y|n
	      Sets or resets the contiguous allocation policy for LVs.	Default
	      is no contiguous allocation based on a next free	principle.   It
	      is  only possible to change a non-contiguous allocation policy to
	      contiguous if all of the allocated physical extents in the LV are
	      already contiguous.

       -d|--debug ...
	      Set debug level. Repeat from 1 to 6 times to increase the	 detail
	      of messages sent to the log file and/or syslog (if configured).

       --deduplication y|n
	      Controls whether deduplication is enabled or disable for VDO vol-
	      ume.  See lvmvdo(7) for more information about VDO usage.

       --deltag Tag
	      Deletes a tag from a PV, VG or LV. This option can be repeated to
	      delete  multiple	tags  at once. See lvm(8) for information about
	      tags.

       --detachprofile
	      Detaches a metadata profile from a VG or LV.  See lvm.conf(5) for
	      more information about profiles.

       --devices PV
	      Restricts the devices that are visible and accessible to the com-
	      mand.  Devices not listed will appear to be missing. This	 option
	      can  be  repeated,  or accepts a comma separated list of devices.
	      This overrides the devices file.

       --devicesfile String
	      A file listing devices that LVM should use.  The file must  exist
	      in  /etc/lvm/devices/  and is managed with the lvmdevices(8) com-
	      mand.  This overrides the lvm.conf(5) devices/devicesfile and de-
	      vices/use_devicesfile settings.

       --discards passdown|nopassdown|ignore
	      Specifies how the device-mapper thin pool	 layer	in  the	 kernel
	      should  handle  discards.	  ignore causes the thin pool to ignore
	      discards.	 nopassdown causes the thin pool  to  process  discards
	      itself  to  allow	 reuse	of  unneeded  extents in the thin pool.
	      passdown causes the thin pool to process	discards  itself  (like
	      nopassdown)  and pass the discards to the underlying device.  See
	      lvmthin(7) for more information.

       --driverloaded y|n
	      If set to no, the command will not attempt to use	 device-mapper.
	      For testing and debugging.

       --errorwhenfull y|n
	      Specifies	 thin pool behavior when data space is exhausted.  When
	      yes, device-mapper will immediately return an error when	a  thin
	      pool is full and an I/O request requires space.  When no, device-
	      mapper  will queue these I/O requests for a period of time to al-
	      low the thin pool to be extended.	  Errors  are  returned	 if  no
	      space  is	 available  after  the timeout.	 (Also see dm-thin-pool
	      kernel module option no_space_timeout.)  See lvmthin(7) for  more
	      information.

       -f|--force ...
	      Override various checks, confirmations and protections.  Use with
	      extreme caution.

       -h|--help
	      Display help text.

       -K|--ignoreactivationskip
	      Ignore  the  "activation skip" LV flag during activation to allow
	      LVs with the flag set to be activated.

       --ignorelockingfailure
	      Allows a command to continue with read-only  metadata  operations
	      after locking failures.

       --ignoremonitoring
	      Do  not interact with dmeventd unless --monitor is specified.  Do
	      not use this if dmeventd is already monitoring a device.

       --integritysettings String
	      Specifies tunable kernel	options	 for  dm-integrity.   See  lvm-
	      raid(7) for more information.

       --journal String
	      Record  information  in the systemd journal.  This information is
	      in addition to information enabled by  the  lvm.conf  log/journal
	      setting.	command: record information about the command.	output:
	      record  the  default  command output.  debug: record full command
	      debugging.

       --lockopt String
	      Used to pass options for special cases  to  lvmlockd.   See  lvm-
	      lockd(8) for more information.

       --longhelp
	      Display long help text.

       -j|--major Number
	      Sets the major number of an LV block device.

       --[raid]maxrecoveryrate Size[k|UNIT]
	      Sets  the maximum recovery rate for a RAID LV.  The rate value is
	      an amount of data per second for each device in the array.   Set-
	      ting  the	 rate  to 0 means it will be unbounded.	 See lvmraid(7)
	      for more information.

       --metadataprofile String
	      The metadata profile  to	use  for  command  configuration.   See
	      lvm.conf(5) for more information about profiles.

       --minor Number
	      Sets the minor number of an LV block device.

       --[raid]minrecoveryrate Size[k|UNIT]
	      Sets  the minimum recovery rate for a RAID LV.  The rate value is
	      an amount of data per second for each device in the array.   Set-
	      ting  the	 rate  to 0 means it will be unbounded.	 See lvmraid(7)
	      for more information.

       --monitor y|n
	      Start  (yes)  or	stop  (no)  monitoring	an  LV	with  dmeventd.
	      dmeventd monitors kernel events for an LV, and performs automated
	      maintenance  for	the  LV	 in  response  to specific events.  See
	      dmeventd(8) for more information.

       --nohints
	      Do not use the hints file to locate devices for  PVs.  A	command
	      may  read	 more  devices to find PVs when hints are not used. The
	      command will still perform standard hint file invalidation  where
	      appropriate.

       --nolocking
	      Disable  locking.	 Use with caution, concurrent commands may pro-
	      duce incorrect results.

       --noudevsync
	      Disables udev synchronization. The process will not wait for  no-
	      tification from udev. It will continue irrespective of any possi-
	      ble  udev	 processing in the background. Only use this if udev is
	      not running or has rules that ignore the devices LVM creates.

       -P|--partial
	      Commands will do their best to activate LVs with missing	PV  ex-
	      tents.   Missing	extents may be replaced with error or zero seg-
	      ments according to the  missing_stripe_filler setting.   Metadata
	      may not be changed with this option.

       -p|--permission rw|r
	      Set access permission to read only r or read and write rw.

       -M|--persistent y|n
	      When yes, makes the specified minor number persistent.

       --poll y|n
	      When  yes,  start the background transformation of an LV.	 An in-
	      complete transformation, e.g. pvmove or lvconvert interrupted  by
	      reboot  or  crash, can be restarted from the last checkpoint with
	      --poll y.	 When no, background transformation of an LV  will  not
	      occur,  and  the	transformation will not complete. It may not be
	      appropriate to immediately poll an LV after activation, in  which
	      case --poll n can be used to defer polling until a later --poll y
	      command.

       --profile String
	      An  alias for --commandprofile or --metadataprofile, depending on
	      the command.

       -q|--quiet ...
	      Suppress output and log messages. Overrides  --debug  and	 --ver-
	      bose.  Repeat once to also suppress any prompts with answer 'no'.

       -r|--readahead auto|none|Number
	      Sets read ahead sector count of an LV.  auto is the default which
	      allows the kernel to choose a suitable value automatically.  none
	      is equivalent to zero.

       --readonly
	      Prevent the command from making changes, including activation and
	      metadata updates.	 (See --permission r for read only LVs.)

       --rebuild PV
	      Selects a PV to rebuild in a raid LV. Multiple PVs can be rebuilt
	      by  repeating  this option.  Use this option in place of --resync
	      or --syncaction repair when  the	PVs  with  corrupted  data  are
	      known,  and their data should be reconstructed rather than recon-
	      structing default (rotating) data.  See lvmraid(7) for  more  in-
	      formation.

       --refresh
	      If  the  LV  is  active,	reload its metadata.  In an environment
	      where udev is used to manage the /dev content, usage of this  op-
	      tion is highly recommended. This is because refresh also regener-
	      ates udev events for an LV based on which existing udev rules are
	      applied  to set the /dev content and permissions.	 Also, this op-
	      eration may be useful if something has gone  wrong,  or  if  some
	      form of manual LV sharing is being used.

       --reportformat basic|json|json_std
	      Overrides	 current  output  format  for  reports which is defined
	      globally by the report/output_format setting in lvm.conf(5).  ba-
	      sic is the original format with columns and rows.	  If  there  is
	      more  than  one  report per command, each report is prefixed with
	      the report name for identification. json produces	 report	 output
	      in  JSON	format.	 json_std produces report output in JSON format
	      which is more compliant with JSON standard.  See lvmreport(7) for
	      more information.

       --resync
	      Initiates mirror synchronization. Synchronization generally  hap-
	      pens  automatically,  but this option forces it to run.  Also see
	      --rebuild to synchronize a specific PV.  During  synchronization,
	      data  is	read  from  the primary mirror device and copied to the
	      others. This can take considerable time, during which the	 LV  is
	      without  a  complete  redundant copy of the data.	 See lvmraid(7)
	      for more information.

       -S|--select String
	      Select objects for processing and reporting  based  on  specified
	      criteria.	  The criteria syntax is described by --select help and
	      lvmreport(7).  For reporting commands, one row is	 displayed  for
	      each object matching the criteria.  See --options help for selec-
	      table  object  fields.   Rows can be displayed with an additional
	      "selected" field (-o selected) showing 1 if the row  matches  the
	      selection	 and  0	 otherwise.   For  non-reporting commands which
	      process LVM entities, the selection is used to  choose  items  to
	      process.

       -k|--setactivationskip y|n
	      Persistently sets (yes) or clears (no) the "activation skip" flag
	      on  an  LV.  An LV with this flag set is not activated unless the
	      --ignoreactivationskip option is used by the activation  command.
	      This  flag  is set by default on new thin snapshot LVs.  The flag
	      is not applied to deactivation.  The current value of the flag is
	      indicated in the lvs lv_attr bits.

       --setautoactivation y|n
	      Set the autoactivation property on a VG or LV.  Display the prop-
	      erty with vgs or lvs "-o autoactivation".	 When  the  autoactiva-
	      tion  property is disabled, the VG or LV will not be activated by
	      a command doing autoactivation (vgchange, lvchange, or pvscan us-
	      ing -aay.)  If autoactivation is disabled on a VG, no LVs will be
	      autoactivated in that VG, and the LV autoactivation property  has
	      no  effect.  If autoactivation is enabled on a VG, autoactivation
	      can be disabled for individual LVs.

       --[raid]syncaction check|repair
	      Initiate different types of RAID	synchronization.   This	 causes
	      the  RAID	 LV to read all data and parity blocks in the array and
	      check for discrepancies (mismatches between mirrors or  incorrect
	      parity  values).	check will count but not correct discrepancies.
	      repair will correct discrepancies.  Mind that these  synchroniza-
	      tion  actions are transient and have to be restarted after a sys-
	      tem failure/reboot or a configuration change to the RaidLV.   See
	      lvs(8) for reporting discrepancies found or repaired.

       --sysinit
	      Indicates that vgchange/lvchange is being invoked from early sys-
	      tem initialisation scripts (e.g. rc.sysinit or an initrd), before
	      writable	filesystems  are available. As such, some functionality
	      needs to be disabled and this option acts as a shortcut which se-
	      lects an appropriate set of options. Currently, this  is	equiva-
	      lent  to using --ignorelockingfailure, --ignoremonitoring, --poll
	      n, and  setting  env  var	 LVM_SUPPRESS_LOCKING_FAILURE_MESSAGES.
	      vgchange/lvchange	 skip  autoactivation,	and defer to pvscan au-
	      toactivation.

       -t|--test
	      Run in test mode. Commands will not update metadata.  This is im-
	      plemented by disabling all metadata writing but nevertheless  re-
	      turning success to the calling function. This may lead to unusual
	      error  messages  in  multi-stage	operations  if a tool relies on
	      reading back metadata it believes has changed but hasn't.

       --vdosettings String
	      Specifies tunable VDO options for VDO LVs.   Use	the  form  'op-
	      tion=value' or 'option1=value option2=value', or repeat --vdoset-
	      tings for each option being set.	These settings override the de-
	      fault VDO behaviors.  To remove vdosettings and revert to the de-
	      fault  VDO behaviors, use --vdosettings 'default'.  See lvmvdo(7)
	      for more information.

       -v|--verbose ...
	      Set verbose level. Repeat from 1 to 4 times to increase  the  de-
	      tail of messages sent to stdout and stderr.

       --version
	      Display version information.

       --[raid]writebehind Number
	      The  maximum number of outstanding writes that are allowed to de-
	      vices in a RAID1 LV that is marked write-mostly.	Once this value
	      is exceeded, writes become synchronous (i.e. all	writes	to  the
	      constituent  devices  must  complete before the array signals the
	      write has completed). Setting the value to zero clears the  pref-
	      erence and allows the system to choose the value arbitrarily.

       --[raid]writemostly PV[:t|n|y]
	      Mark  a device in a RAID1 LV as write-mostly.  All reads to these
	      drives will be avoided unless absolutely	necessary.  This  keeps
	      the  number of I/Os to the drive to a minimum. The default behav-
	      ior is to set the write-mostly attribute for  the	 specified  PV.
	      It is also possible to remove the write-mostly flag by adding the
	      suffix  :n at the end of the PV name, or to toggle the value with
	      the suffix :t. Repeat this option to change the attribute on mul-
	      tiple PVs.

       -y|--yes
	      Do not prompt for confirmation interactively  but	 always	 assume
	      the answer yes. Use with extreme caution.	 (For automatic no, see
	      -qq.)

       -Z|--zero y|n
	      Set  zeroing mode for thin pool. Note: already provisioned blocks
	      from pool in non-zero mode are not  cleared  in  unwritten  parts
	      when setting --zero y.

VARIABLES
       VG     Volume Group name.  See lvm(8) for valid names.

       LV     Logical  Volume  name.   See lvm(8) for valid names.  An LV posi-
	      tional arg generally includes the	 VG  name  and	LV  name,  e.g.
	      VG/LV.  LV1 indicates the LV must have a specific type, where the
	      accepted LV types are listed. (raid represents raid<N> type).

       Tag    Tag  name.   See lvm(8) for information about tag names and using
	      tags in place of a VG, LV or PV.

       Select Select indicates that a  required	 positional  parameter	can  be
	      omitted  if  the --select option is used.	 No arg appears in this
	      position.

       String See the option description for information about the string  con-
	      tent.

       Size[UNIT]
	      Size  is	an  input  number that accepts an optional unit.  Input
	      units are always treated as base two values, regardless of  capi-
	      talization, e.g. 'k' and 'K' both refer to 1024.	The default in-
	      put  unit is specified by letter, followed by |UNIT.  UNIT repre-
	      sents other possible input units: b|B is bytes, s|S is sectors of
	      512 bytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is
	      PiB, e|E is EiB.	(This should not be confused  with  the	 output
	      control --units, where capital letters mean multiple of 1000.)

ENVIRONMENT VARIABLES
       See lvm(8) for information about environment variables used by lvm.  For
       example,	 LVM_VG_NAME can generally be substituted for a required VG pa-
       rameter.

EXAMPLES
       Change LV permission to read-only:
       lvchange -pr vg00/lvol1

SEE ALSO
       lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),

       pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8),
       pvresize(8), pvs(8), pvscan(8),

       vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8),
       vgconvert(8), vgdisplay(8), vgexport(8), vgextend(8), vgimport(8),
       vgimportclone(8), vgimportdevices(8), vgmerge(8), vgmknodes(8),
       vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8),

       lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8),
       lvreduce(8), lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8),

       lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),

       dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8),
       lvmdbusd(8), fsadm(8),

       lvmsystemid(7), lvmreport(7), lvmcache(7), lvmraid(7), lvmthin(7),
       lvmvdo(7), lvmautoactivation(7)

Red Hat, Inc.	       LVM TOOLS 2.03.31(2) (2025-02-27)	    LVCHANGE(8)