search..
No manual entry for -- in section 8
IP-ROUTE(8)			     Linux			    IP-ROUTE(8)

NAME
       ip-route - routing table management

SYNOPSIS
       ip [ ip-OPTIONS ] route	{ COMMAND | help }

       ip route { show | flush } SELECTOR

       ip route save SELECTOR

       ip route restore

       ip route get ROUTE_GET_FLAGS [ to ] ADDRESS [ from ADDRESS iif STRING  ]
	       [ oif STRING ] [ mark MARK ] [ tos TOS ] [ vrf NAME ] [ ipproto
	       PROTOCOL ] [ sport NUMBER ] [ dport NUMBER ] [ as ADDRESS ] [
	       flowlabel FLOWLABEL ]

       ip route { add | del | change | append | replace } ROUTE

       SELECTOR := [ root PREFIX ] [ match PREFIX ] [ exact PREFIX ] [ table
	       TABLE_ID ] [ vrf NAME ] [ proto RTPROTO ] [ type TYPE ] [ scope
	       SCOPE ]

       ROUTE := NODE_SPEC [ INFO_SPEC ]

       NODE_SPEC := [ TYPE ] PREFIX [ tos TOS ] [ table TABLE_ID ] [ proto RT-
	       PROTO ] [ scope SCOPE ] [ metric METRIC ] [ ttl-propagate { en-
	       abled | disabled } ]

       INFO_SPEC := { NH | nhid ID } OPTIONS FLAGS [ nexthop NH ] ...

       NH := [ encap ENCAP ] [ via [ FAMILY ] ADDRESS ] [ dev STRING ] [ weight
	       NUMBER ] NHFLAGS

       FAMILY := [ inet | inet6 | mpls | bridge | link ]

       OPTIONS := FLAGS [ mtu NUMBER ] [ advmss NUMBER ] [ as [ to ] ADDRESS ]
	       rtt TIME ] [ rttvar TIME ] [ reordering NUMBER ] [ window NUMBER
	       ] [ cwnd NUMBER ] [ ssthresh NUMBER ] [ realms REALM ] [ rto_min
	       TIME ] [ initcwnd NUMBER ] [ initrwnd NUMBER ] [ features FEA-
	       TURES ] [ quickack BOOL ] [ congctl NAME ] [ pref PREF ] [ ex-
	       pires TIME ] [ fastopen_no_cookie BOOL ]

       TYPE := [ unicast | local | broadcast | multicast | throw | unreachable
	       | prohibit | blackhole | nat ]

       TABLE_ID := [ local| main | default | all | NUMBER ]

       SCOPE := [ host | link | global | NUMBER ]

       NHFLAGS := [ onlink | pervasive ]

       RTPROTO := [ kernel | boot | static | NUMBER ]

       FEATURES := [ ecn | ]

       PREF := [ low | medium | high ]

       ENCAP := [ ENCAP_MPLS | ENCAP_IP | ENCAP_BPF | ENCAP_SEG6 | EN-
	       CAP_SEG6LOCAL | ENCAP_IOAM6 ]

       ENCAP_MPLS := mpls [ LABEL ] [ ttl TTL ]

       ENCAP_IP := ip id TUNNEL_ID dst REMOTE_IP [ src SRC ] [ tos TOS ] [ ttl
	       TTL ] [ key ] [ csum ] [ seq ] [ GENEVE_OPTS | VXLAN_OPTS |
	       ERSPAN_OPTS ]

       ENCAP_BPF := bpf [ in PROG ] [ out PROG ] [ xmit PROG ] [ headroom SIZE
	       ]

       ENCAP_SEG6 := seg6 mode [ encap | encap.red | inline | l2encap | l2en-
	       cap.red ] segs SEGMENTS [ hmac KEYID ]

       ENCAP_SEG6LOCAL := seg6local action SEG6_ACTION [ SEG6_ACTION_PARAM ] [
	       count ]

       ENCAP_IOAM6 := ioam6 [ freq K/N ] mode [ inline | encap | auto ] [ tun-
	       src ADDRESS ] [ tundst ADDRESS ] trace prealloc type
	       IOAM6_TRACE_TYPE ns IOAM6_NAMESPACE size IOAM6_TRACE_SIZE

       ROUTE_GET_FLAGS := ROUTE_GET_FLAG [ ROUTE_GET_FLAGS ]

       ROUTE_GET_FLAG := [ connected | fibmatch | notify ]

DESCRIPTION
       ip route is used to manipulate entries in the kernel routing tables.

       Route types:

	       unicast - the route entry describes real paths to the destina-
	       tions covered by the route prefix.

	       unreachable - these destinations are unreachable. Packets are
	       discarded and the ICMP message host unreachable is generated.
	       The local senders get an EHOSTUNREACH error.

	       blackhole - these destinations are unreachable. Packets are dis-
	       carded silently.	 The local senders get an EINVAL error.

	       prohibit - these destinations are unreachable. Packets are dis-
	       carded and the ICMP message communication administratively pro-
	       hibited is generated. The local senders get an EACCES error.

	       local - the destinations are assigned to this host. The packets
	       are looped back and delivered locally.

	       broadcast - the destinations are broadcast addresses. The pack-
	       ets are sent as link broadcasts.

	       throw - a special control route used together with policy rules.
	       If such a route is selected, lookup in this table is terminated
	       pretending that no route was found. Without policy routing it is
	       equivalent to the absence of the route in the routing table. The
	       packets are dropped and the ICMP message net unreachable is gen-
	       erated. The local senders get an ENETUNREACH error.

	       nat - a special NAT route. Destinations covered by the prefix
	       are considered to be dummy (or external) addresses which require
	       translation to real (or internal) ones before forwarding. The
	       addresses to translate to are selected with the attribute via.
	       Warning: Route NAT is no longer supported in Linux 2.6.

	       anycast - not implemented the destinations are anycast addresses
	       assigned to this host. They are mainly equivalent to local with
	       one difference: such addresses are invalid when used as the
	       source address of any packet.

	       multicast - a special type used for multicast routing. It is not
	       present in normal routing tables.

       Route tables: Linux-2.x can pack routes into several routing tables
       identified by a number in the range from 1 to 2^32-1 or by name from
       /usr/share/iproute2/rt_tables or /etc/iproute2/rt_tables (has precedence
       if exists).  By default all normal routes are inserted into the main ta-
       ble (ID 254) and the kernel only uses this table when calculating
       routes.	Values (0, 253, 254, and 255) are reserved for built-in use.

       Actually, one other table always exists, which is invisible but even
       more important. It is the local table (ID 255). This table consists of
       routes for local and broadcast addresses. The kernel maintains this ta-
       ble automatically and the administrator usually need not modify it or
       even look at it.

       The multiple routing tables enter the game when policy routing is used.

       ip route add
	      add new route

       ip route change
	      change route

       ip route replace
	      change or add new one

	      to TYPE PREFIX (default)
		     the  destination  prefix of the route. If TYPE is omitted,
		     ip assumes type unicast.  Other values of TYPE are	 listed
		     above.   PREFIX  is  an IP or IPv6 address optionally fol-
		     lowed by a slash and the prefix length. If the  length  of
		     the  prefix  is  missing,	ip  assumes  a full-length host
		     route. There is also a special PREFIX default -  which  is
		     equivalent to IP 0/0 or to IPv6 ::/0.

	      tos TOS

	      dsfield TOS
		     the  Type Of Service (TOS) key. This key has no associated
		     mask and the longest match is understood as:  First,  com-
		     pare  the	TOS of the route and of the packet. If they are
		     not equal, then the packet may still match a route with  a
		     zero TOS.	TOS is either an 8 bit hexadecimal number or an
		     identifier	   from	   /usr/share/iproute2/rt_dsfield    or
		     /etc/iproute2/rt_dsfield (has precedence if exists).

	      metric NUMBER

	      preference NUMBER
		     the preference value of the route.	 NUMBER is an arbitrary
		     32bit number, where routes	 with  lower  values  are  pre-
		     ferred.

	      table TABLEID
		     the  table	 to add this route to.	TABLEID may be a number
		     or	 a   string   from   /usr/share/iproute2/rt_tables   or
		     /etc/iproute2/rt_tables  (has  precedence	if exists).  If
		     this parameter is omitted, ip assumes the main table, with
		     the exception of local, broadcast and  nat	 routes,  which
		     are put into the local table by default.

	      vrf NAME
		     the  vrf  name  to add this route to. Implicitly means the
		     table associated with the VRF.

	      dev NAME
		     the output device name.

	      via [ FAMILY ] ADDRESS
		     the address of the nexthop router, in the	address	 family
		     FAMILY.   Actually, the sense of this field depends on the
		     route type.  For normal unicast routes it	is  either  the
		     true next hop router or, if it is a direct route installed
		     in	 BSD  compatibility  mode, it can be a local address of
		     the interface. For NAT routes it is the first  address  of
		     the block of translated IP destinations.

	      src ADDRESS
		     the  source address to prefer when sending to the destina-
		     tions covered by the route prefix.

	      realm REALMID
		     the realm to which this route is assigned.	 REALMID may be
		     a number or a string from /usr/share/iproute2/rt_realms or
		     /etc/iproute2/rt_realms (has precedence if exists).

	      mtu MTU

	      mtu lock MTU
		     the MTU along the path to the destination. If the modifier
		     lock is not used, the MTU may be updated by the kernel due
		     to Path MTU Discovery. If the modifier lock  is  used,  no
		     path MTU discovery will be tried, all packets will be sent
		     without  the  DF bit in IPv4 case or fragmented to MTU for
		     IPv6.

	      window NUMBER
		     the maximal window for TCP to advertise to these  destina-
		     tions,  measured  in  bytes. It limits maximal data bursts
		     that our TCP peers are allowed to send to us.

	      rtt TIME
		     the initial RTT ('Round Trip Time') estimate. If no suffix
		     is specified the units are raw values passed  directly  to
		     the  routing  code to maintain compatibility with previous
		     releases.	Otherwise if a suffix of s, sec or secs is used
		     to specify seconds and ms, msec or msecs to  specify  mil-
		     liseconds.

	      rttvar TIME (Linux 2.3.15+ only)
		     the initial RTT variance estimate. Values are specified as
		     with rtt above.

	      rto_min TIME (Linux 2.6.23+ only)
		     the  minimum TCP Retransmission TimeOut to use when commu-
		     nicating with this destination. Values  are  specified  as
		     with rtt above.

	      ssthresh NUMBER (Linux 2.3.15+ only)
		     an estimate for the initial slow start threshold.

	      cwnd NUMBER (Linux 2.3.15+ only)
		     the clamp for congestion window. It is ignored if the lock
		     flag is not used.

	      initcwnd NUMBER (Linux 2.5.70+ only)
		     the initial congestion window size for connections to this
		     destination.   Actual window size is this value multiplied
		     by the MSS (``Maximal Segment Size'') for same connection.
		     The default is zero, meaning to use the  values  specified
		     in RFC2414.

	      initrwnd NUMBER (Linux 2.6.33+ only)
		     the  initial  receive  window size for connections to this
		     destination.  Actual window size is this value  multiplied
		     by	 the MSS of the connection.  The default value is zero,
		     meaning to use Slow Start value.

	      features FEATURES (Linux3.18+only)
		     Enable or disable per-route features. Only available  fea-
		     ture at this time is ecn to enable explicit congestion no-
		     tification when initiating connections to the given desti-
		     nation  network.	When responding to a connection request
		     from the given network, ecn will also be used even if  the
		     net.ipv4.tcp_ecn sysctl is set to 0.

	      quickack BOOL (Linux 3.11+ only)
		     Enable or disable quick ack for connections to this desti-
		     nation.

	      fastopen_no_cookie BOOL (Linux 4.15+ only)
		     Enable  TCP  Fastopen  without a cookie for connections to
		     this destination.

	      congctl NAME (Linux 3.20+ only)

	      congctl lock NAME (Linux 3.20+ only)
		     Sets a specific TCP congestion control algorithm only  for
		     a	given  destination.   If not specified, Linux keeps the
		     current global default TCP congestion  control  algorithm,
		     or	 the one set from the application. If the modifier lock
		     is not used, an application may nevertheless overwrite the
		     suggested congestion control algorithm for	 that  destina-
		     tion. If the modifier lock is used, then an application is
		     not  allowed to overwrite the specified congestion control
		     algorithm for  that  destination,	thus  it  will	be  en-
		     forced/guaranteed to use the proposed algorithm.

	      advmss NUMBER (Linux 2.3.15+ only)
		     the  MSS  ('Maximal  Segment  Size') to advertise to these
		     destinations when establishing TCP connections. If	 it  is
		     not  given, Linux uses a default value calculated from the
		     first hop device MTU.  (If the path to  these  destination
		     is asymmetric, this guess may be wrong.)

	      reordering NUMBER (Linux 2.3.15+ only)
		     Maximal reordering on the path to this destination.  If it
		     is	 not  given,  Linux uses the value selected with sysctl
		     variable net/ipv4/tcp_reordering.

	      nexthop NEXTHOP
		     the nexthop of a multipath route.	NEXTHOP	 is  a	complex
		     value  with  its own syntax similar to the top level argu-
		     ment lists:

			     via [ FAMILY ] ADDRESS - is the nexthop router.

			     dev NAME - is the output device.

			     weight NUMBER - is a weight for this element of  a
			     multipath	route reflecting its relative bandwidth
			     or quality.

		     The internal buffer used in iproute2  limits  the	maximum
		     number  of	 nexthops  that	 may be specified in one go. If
		     only ADDRESS is given, the current buffer size allows  for
		     144 IPv6 nexthops and 253 IPv4 ones. For IPv4, this effec-
		     tively  limits  the number of nexthops possible per route.
		     With IPv6, further nexthops may be appended  to  the  same
		     route via ip route append command.

	      scope SCOPE_VAL
		     the scope of the destinations covered by the route prefix.
		     SCOPE_VAL	 may   be   a	number	 or   a	  string   from
		     /usr/share/iproute2/rt_scopes  or	/etc/iproute2/rt_scopes
		     (has precedence if exists).  If this parameter is omitted,
		     ip	 assumes scope global for all gatewayed unicast routes,
		     scope link for direct unicast  and	 broadcast  routes  and
		     scope host for local routes.

	      protocol RTPROTO
		     the  routing  protocol  identifier of this route.	RTPROTO
		     may    be	  a	number	   or	  a	string	   from
		     /usr/share/iproute2/rt_protos  or	/etc/iproute2/rt_protos
		     (has precedence if exists).  If the routing protocol ID is
		     not given, ip assumes protocol boot (i.e. it  assumes  the
		     route  was	 added	by  someone who doesn't understand what
		     they are doing). Several protocol values have a fixed  in-
		     terpretation.  Namely:

			     redirect  - the route was installed due to an ICMP
			     redirect.

			     kernel - the route was  installed	by  the	 kernel
			     during autoconfiguration.

			     boot  -  the route was installed during the bootup
			     sequence.	If a routing  daemon  starts,  it  will
			     purge all of them.

			     static  -	the route was installed by the adminis-
			     trator to override dynamic routing. Routing daemon
			     will respect them and,  probably,	even  advertise
			     them to its peers.

			     ra	 -  the route was installed by Router Discovery
			     protocol.

		     The rest of the values are not reserved and  the  adminis-
		     trator is free to assign (or not to assign) protocol tags.

	      onlink pretend  that  the	 nexthop  is  directly attached to this
		     link, even if it does not match any interface prefix.

	      pref PREF
		     the IPv6 route preference.	 PREF is  a  string  specifying
		     the route preference as defined in RFC4191 for Router Dis-
		     covery messages. Namely:

			     low - the route has a lowest priority

			     medium - the route has a default priority

			     high - the route has a highest priority

	      nhid ID
		     use nexthop object with given id as nexthop specification.

	      encap ENCAPTYPE ENCAPHDR
		     attach tunnel encapsulation attributes to this route.

		     ENCAPTYPE	is a string specifying the supported encapsula-
		     tion type. Namely:

			     mpls - encapsulation type MPLS

			     ip - IP encapsulation (Geneve, GRE, VXLAN, ...)

			     bpf - Execution of BPF program

			     seg6 - encapsulation type IPv6 Segment Routing

			     seg6local - local SRv6 segment processing

			     ioam6 - encapsulation type IPv6 IOAM

			     xfrm - encapsulation type XFRM

		     ENCAPHDR is a set of encapsulation attributes specific  to
		     the ENCAPTYPE.

			     mpls
			       MPLSLABEL  -  mpls label stack with labels sepa-
			       rated by /

			       ttl TTL - TTL to use for MPLS header or 0 to in-
			       herit from IP header

			     ip
			       id TUNNEL_ID - Tunnel ID	 (for  example	VNI  in
			       VXLAN tunnel)

			       dst  REMOTE_IP - Outer header destination IP ad-
			       dress (IPv4 or IPv6)

			       src SRC - Outer header source IP	 address  (IPv4
			       or IPv6)

			       tos TOS - Outer header TOS

			       ttl TTL - Outer header TTL

			       key - Outer header flags with key in GRE tunnel

			       csum  - Outer header flags with csum in GRE tun-
			       nel

			       seq - Outer header flags with seq in GRE tunnel

			       GENEVE_OPTS   -	 Specified    in    the	   form
			       CLASS:TYPE:DATA, where CLASS is represented as a
			       16bit  hexadecimal  value, TYPE as an 8bit hexa-
			       decimal value and  DATA	as  a  variable	 length
			       hexadecimal value. Additionally multiple options
			       may be listed using a comma delimiter.

			       VXLAN_OPTS  -  Specified	 in  the form GBP, as a
			       32bit number. Multiple options is not supported.

			       ERSPAN_OPTS - Specified in the form  VERSION:IN-
			       DEX:DIR:HWID,  where VERSION is represented as a
			       8bit number, INDEX as an 32bit number,  DIR  and
			       HWID  as a 8bit number.	Multiple options is not
			       supported. Note INDEX is used when VERSION is 1,
			       and DIR and HWID are used when VERSION is 2.

			     bpf
			       in PROG - BPF program to	 execute  for  incoming
			       packets

			       out  PROG  - BPF program to execute for outgoing
			       packets

			       xmit PROG - BPF program to execute for transmit-
			       ted packets

			       headroom SIZE - Size of header BPF program  will
			       attach (xmit)

			     seg6
			       mode  inline  -	Directly insert Segment Routing
			       Header after IPv6 header

			       mode encap - Encapsulate packet in an outer IPv6
			       header with SRH

			       mode encap.red - Encapsulate packet in an  outer
			       IPv6  header  with SRH applying the reduced seg-
			       ment list. When there is only  one  segment  and
			       the HMAC is not present, the SRH is omitted.

			       mode  l2encap  -	 Encapsulate  ingress  L2 frame
			       within an outer IPv6 header and SRH

			       mode l2encap.red - Encapsulate ingress L2  frame
			       within an outer IPv6 header and SRH applying the
			       reduced	segment	 list.	When  there is only one
			       segment and the HMAC is not present, the SRH  is
			       omitted.

			       SEGMENTS	 -  List  of  comma-separated  IPv6 ad-
			       dresses

			       KEYID - Numerical value in  decimal  representa-
			       tion. See ip-sr(8).

			     seg6local
			       SEG6_ACTION  [  SEG6_ACTION_PARAM  ] [ count ] -
			       Operation to perform on	matching  packets.  The
			       optional count attribute is used to collect sta-
			       tistics	on  the	 processing  of actions.  Three
			       counters are implemented: 1)  packets  correctly
			       processed;  2)  bytes  correctly	 processed;  3)
			       packets that cause  a  processing  error	 (i.e.,
			       missing	SID  List, wrong SID List, etc). To re-
			       trieve the counters related to an action use the
			       -s flag in the show command.  The following  ac-
			       tions   are  currently  supported  (Linux  4.14+
			       only).

				 End [ flavors FLAVORS ] -  Regular  SRv6  pro-
				 cessing   as  intermediate  segment  endpoint.
				 This action only accepts packets with	a  non-
				 zero Segments Left value. Other matching pack-
				 ets  are  dropped. The presence of flavors can
				 change the regular processing of an End behav-
				 ior according to the user-provided Flavor  op-
				 erations   and	  information  carried	in  the
				 packet.  See Flavors parameters section.

				 End.X nh6 NEXTHOP [ flavors FLAVORS ] -  Regu-
				 lar  SRv6  processing	as intermediate segment
				 endpoint.   Additionally,  forward   processed
				 packets  to  given next-hop.  This action only
				 accepts packets with a non-zero Segments  Left
				 value. Other matching packets are dropped. The
				 presence  of  flavors	can  change the regular
				 processing of an End.X behavior  according  to
				 the user-provided Flavor operations and infor-
				 mation carried in the packet.	See Flavors pa-
				 rameters section.

				 End.DX6  nh6  NEXTHOP - Decapsulate inner IPv6
				 packet and forward it to the  specified  next-
				 hop.  If  the	argument is set to ::, then the
				 next-hop is selected according	 to  the  local
				 selection  rules.  This  action  only	accepts
				 packets with either a zero Segments Left value
				 or no SRH at all, and an  inner  IPv6	packet.
				 Other matching packets are dropped.

				 End.DT6  { table | vrftable } TABLEID - Decap-
				 sulate the inner IPv6 packet  and  forward  it
				 according   to	 the  specified	 lookup	 table.
				 TABLEID is either a number or	a  string  from
				 /usr/share/iproute2/rt_tables		     or
				 /etc/iproute2/rt_tables (has precedence if ex-
				 ists).	 If vrftable is used, the argument must
				 be a VRF device associated with the table  id.
				 Moreover,  the	 VRF  table associated with the
				 table id  must	 be  configured	 with  the  VRF
				 strict mode turned on (net.vrf.strict_mode=1).
				 This action only accepts packets with either a
				 zero Segments Left value or no SRH at all, and
				 an  inner  IPv6 packet. Other matching packets
				 are dropped.

				 End.DT4 vrftable TABLEID - Decapsulate the in-
				 ner IPv4 packet and forward  it  according  to
				 the specified lookup table.  TABLEID is either
				 a	number	   or	  a	string	   from
				 /usr/share/iproute2/rt_tables		     or
				 /etc/iproute2/rt_tables (has precedence if ex-
				 ists).	  The argument must be a VRF device as-
				 sociated with the table id.  Moreover, the VRF
				 table associated with the  table  id  must  be
				 configured  with the VRF strict mode turned on
				 (net.vrf.strict_mode=1). This action only  ac-
				 cepts packets with either a zero Segments Left
				 value	or  no	SRH  at	 all, and an inner IPv4
				 packet. Other matching packets are dropped.

				 End.DT46 vrftable TABLEID  -  Decapsulate  the
				 inner	IPv4  or IPv6 packet and forward it ac-
				 cording  to  the   specified	lookup	 table.
				 TABLEID  is  either  a number or a string from
				 /usr/share/iproute2/rt_tables		     or
				 /etc/iproute2/rt_tables (has precedence if ex-
				 ists).	  The argument must be a VRF device as-
				 sociated with the table id.  Moreover, the VRF
				 table associated with the  table  id  must  be
				 configured  with the VRF strict mode turned on
				 (net.vrf.strict_mode=1). This action only  ac-
				 cepts packets with either a zero Segments Left
				 value	or  no SRH at all, and an inner IPv4 or
				 IPv6  packet.	Other  matching	  packets   are
				 dropped.

				 End.B6	 srh segs SEGMENTS [ hmac KEYID ] - In-
				 sert the specified SRH immediately  after  the
				 IPv6 header, update the DA with the first seg-
				 ment  of  the newly inserted SRH, then forward
				 the resulting packet. The original SRH is  not
				 modified.  This  action  only	accepts packets
				 with a non-zero  Segments  Left  value.  Other
				 matching packets are dropped.

				 End.B6.Encaps srh segs SEGMENTS [ hmac KEYID ]
				 - Regular SRv6 processing as intermediate seg-
				 ment  endpoint.  Additionally, encapsulate the
				 matching packet within an  outer  IPv6	 header
				 followed by the specified SRH. The destination
				 address of the outer IPv6 header is set to the
				 first	segment	 of the new SRH. The source ad-
				 dress is set as described in ip-sr(8).

				 Flavors parameters

				 The flavors  represent	 additional  operations
				 that  can modify or extend a subset of the ex-
				 isting behaviors.

				   flavors OPERATION[,OPERATION] [ATTRIBUTES]

				     OPERATION := { psp | usp | usd | next-csid
				     }

				     ATTRIBUTES := { KEY VALUE } [ ATTRIBUTES ]

				     KEY := { lblen | nflen }

				   psp -  The  Penultimate  Segment  Pop  (PSP)
				   copies  the last SID from the SID List (car-
				   ried by the outermost  SRH)	into  the  IPv6
				   Destination	Address	 (DA) and removes (i.e.
				   pops) the SRH from the IPv6 header.	The PSP
				   operation takes place only at a  penultimate
				   SR  Segment Endpoint node (e.g., the Segment
				   Left must be one) and  does	not  happen  at
				   non-penultimate  endpoint nodes. This flavor
				   is currently only supported by End behavior.

				   usp - Ultimate Segment Pop of the  SRH  (not
				   yet supported in kernel)

				   usd	-  Ultimate  Segment Decapsulation (not
				   yet supported in kernel)

				   next-csid - The NEXT-C-SID mechanism	 offers
				   the	possibility  of	 encoding  several SRv6
				   segments within a single  128  bit  SID  ad-
				   dress.  The NEXT-C-SID flavor can be config-
				   ured to support user-provided  Locator-Block
				   and	Locator-Node Function lengths. If Loca-
				   tor-Block   and/or	Locator-Node   Function
				   lengths  are not provided by the user during
				   configuration of an SRv6  End  behavior  in-
				   stance  with	 NEXT-C-SID flavor, the default
				   value is 32-bit for Locator-Block and 16-bit
				   for Locator-Node Function.

				   lblen  VALUE	 -  defines  the  Locator-Block
				   length  for NEXT-C-SID flavor.  The Locator-
				   Block length must  be  greater  than	 0  and
				   evenly divisible by 8. This attribute can be
				   used only with NEXT-C-SID flavor.

				   nflen VALUE - defines the Locator-Node Func-
				   tion	 length for NEXT-C-SID flavors. The Lo-
				   cator-Node Function length must  be	greater
				   than	 0  and evenly divisible by 8. This at-
				   tribute can be  used	 only  with  NEXT-C-SID
				   flavor.

			       ioam6
				 freq  K/N  -  Inject IOAM in K packets every N
				 packets (default is 1/1).

				 mode inline - Directly insert IOAM after  IPv6
				 header (default mode).

				 mode  encap  -	 Encapsulate packet in an outer
				 IPv6 header with IOAM.

				 mode auto - Automatically use inline mode  for
				 local	packets	 and  encap mode for in-transit
				 packets.

				 tunsrc ADDRESS - IPv6 address	of  the	 tunnel
				 source	 (outer	 header),  not used with inline
				 mode.	It is optional: if  not	 provided,  the
				 tunnel source address is chosen automatically.

				 tundst	 ADDRESS  -  IPv6 address of the tunnel
				 destination (outer header), not used with  in-
				 line mode.

				 type  IOAM6_TRACE_TYPE - List of IOAM data re-
				 quired in the trace, represented by a bitfield
				 (24 bits).

				 ns IOAM6_NAMESPACE - Numerical value to repre-
				 sent an IOAM namespace. See ip-ioam(8).

				 size IOAM6_TRACE_SIZE - Size,	in  octets,  of
				 the pre-allocated trace data block.

			       xfrm
				 if_id IF_ID  [ link_dev LINK_DEV ]

	      expires TIME (Linux 4.4+ only)
		     the  route	 will  be deleted after the expires time.  Only
		     support IPv6 at present.

	      ttl-propagate { enabled | disabled }
		     Control whether TTL should be propagated  from  any  encap
		     into  the	un-encapsulated	 packet,  overriding any global
		     configuration. Only supported for MPLS at present.

       ip route delete
	      delete route
	      ip route del has the same arguments as ip route  add,  but  their
	      semantics are a bit different.

	      Key  values  (to,	 tos, preference and table) select the route to
	      delete. If optional attributes are present, ip verifies that they
	      coincide with the attributes of the route to delete.  If no route
	      with the given key and attributes was found, ip route del fails.

       ip route show
	      list routes
	      the command displays the contents of the routing	tables	or  the
	      route(s) selected by some criteria.

	      to SELECTOR (default)
		     only  select  routes from the given range of destinations.
		     SELECTOR consists of an optional modifier (root, match  or
		     exact) and a prefix.  root PREFIX selects routes with pre-
		     fixes not shorter than PREFIX.  F.e.  root 0/0 selects the
		     entire  routing  table.   match PREFIX selects routes with
		     prefixes not longer than PREFIX.  F.e.  match 10.0/16  se-
		     lects  10.0/16,  10/8  and	 0/0,  but  it	does not select
		     10.1/16 and 10.0.0/24.  And exact PREFIX (or just	PREFIX)
		     selects routes with this exact prefix. If neither of these
		     options are present, ip assumes root 0/0 i.e. it lists the
		     entire table.

	      tos TOS

	      dsfield TOS
		     only select routes with the given TOS.

	      table TABLEID
		     show the routes from this table(s). The default setting is
		     to	 show  table  main.   TABLEID may either be the ID of a
		     real table or one of the special values:

			     all - list all of the tables.

			     cache - dump the routing cache.

	      vrf NAME
		     show the routes for the table associated with the vrf name

	      cloned

	      cached list cloned routes	 i.e.  routes  which  were  dynamically
		     forked  from  other  routes  because  some route attribute
		     (f.e. MTU) was updated.  Actually, it is equivalent to ta-
		     ble cache.

	      from SELECTOR
		     the same syntax as for to, but it binds the source address
		     range rather than destinations.  Note that the from option
		     only works with cloned routes.

	      protocol RTPROTO
		     only list routes of this protocol.

	      scope SCOPE_VAL
		     only list routes with this scope.

	      type TYPE
		     only list routes of this type.

	      dev NAME
		     only list routes going via this device.

	      via [ FAMILY ] PREFIX
		     only list routes going via the nexthop routers selected by
		     PREFIX.

	      src PREFIX
		     only list routes with preferred source addresses  selected
		     by PREFIX.

	      realm REALMID

	      realms FROMREALM/TOREALM
		     only list routes with these realms.

       ip route flush
	      flush routing tables
	      this command flushes routes selected by some criteria.

	      The arguments have the same syntax and semantics as the arguments
	      of  ip  route show, but routing tables are not listed but purged.
	      The only difference is the default action: show dumps all the  IP
	      main routing table but flush prints the helper page.

	      With  the	 -statistics  option,  the  command becomes verbose. It
	      prints out the number of deleted routes and the number of	 rounds
	      made to flush the routing table. If the option is given twice, ip
	      route  flush  also dumps all the deleted routes in the format de-
	      scribed in the previous subsection.

       ip route get
	      get a single route
	      this command gets a single route to a destination and prints  its
	      contents exactly as the kernel sees it.

	      fibmatch
		     Return full fib lookup matched route. Default is to return
		     the resolved dst entry

	      to ADDRESS (default)
		     the destination address.

	      from ADDRESS
		     the source address.

	      tos TOS

	      dsfield TOS
		     the Type Of Service.

	      iif NAME
		     the device from which this packet is expected to arrive.

	      oif NAME
		     force  the	 output	 device	 on  which  this packet will be
		     routed.

	      mark MARK
		     the firewall mark (fwmark)

	      vrf NAME
		     force the vrf device on which this packet will be routed.

	      ipproto PROTOCOL
		     ip protocol as seen by the route lookup

	      sport NUMBER
		     source port as seen by the route lookup

	      dport NUMBER
		     destination port as seen by the route lookup

	      connected
		     if no source address (option from) was given, relookup the
		     route with the source set to  the	preferred  address  re-
		     ceived  from the first lookup.  If policy routing is used,
		     it may be a different route.

	      flowlabel FLOWLABEL
		     ipv6 flow label as seen by the route lookup

	      Note that this operation is not  equivalent  to  ip  route  show.
	      show  shows  existing  routes.  get resolves them and creates new
	      clones if necessary. Essentially, get is equivalent to sending  a
	      packet  along  this  path.  If the iif argument is not given, the
	      kernel creates a route to output packets	towards	 the  requested
	      destination.   This is equivalent to pinging the destination with
	      a subsequent ip route ls cache, however, no packets are  actually
	      sent.  With  the	iif argument, the kernel pretends that a packet
	      arrived from this interface and searches for a  path  to	forward
	      the packet.

       ip route save
	      save routing table information to stdout
	      This command behaves like ip route show except that the output is
	      raw data suitable for passing to ip route restore.

       ip route restore
	      restore routing table information from stdin
	      This  command  expects  to read a data stream as returned from ip
	      route save.  It will attempt to restore the routing table	 infor-
	      mation exactly as it was at the time of the save, so any transla-
	      tion  of	information in the stream (such as device indexes) must
	      be done first. Any existing routes are left unchanged. Any routes
	      specified in the data stream that already exist in the table will
	      be ignored.

NOTES
       Starting with Linux kernel version 3.6, there is no  routing  cache  for
       IPv4 anymore. Hence ip route show cached will never print any entries on
       systems with this or newer kernel versions.

EXAMPLES
       ip ro
	   Show all route entries in the kernel.

       ip route add default via 192.168.1.1 dev eth0
	   Adds	 a  default  route  (for  all  addresses) via the local gateway
	   192.168.1.1 that can be reached on device eth0.

       ip route add 10.1.1.0/30 encap mpls 200/300 via 10.1.1.1 dev eth0
	   Adds an ipv4 route with mpls encapsulation  attributes  attached  to
	   it.

       ip   -6	 route	 add   2001:db8:1::/64	 encap	seg6  mode  encap  segs
       2001:db8:42::1,2001:db8:ffff::2 dev eth0
	   Adds an IPv6 route with SRv6	 encapsulation	and  two  segments  at-
	   tached.

       ip -6 route add 2001:db8:1::/64 encap seg6local action End.DT46 vrftable
       100 dev vrf100
	   Adds	 an  IPv6 route with SRv6 decapsulation and forward with lookup
	   in VRF table.

       ip -6 route add 2001:db8:1::/64 encap seg6local action End  flavors  psp
       dev eth0
	   Adds an IPv6 route with SRv6 End behavior with psp flavor enabled.

       ip -6 route add 2001:db8:1::/64 encap seg6local action End flavors next-
       csid dev eth0
	   Adds	 an IPv6 route with SRv6 End behavior with next-csid flavor en-
	   abled.

       ip -6 route add 2001:db8:1::/64 encap seg6local action End flavors next-
       csid lblen 48 nflen 16 dev eth0
	   Adds an IPv6 route with SRv6 End behavior with next-csid flavor  en-
	   abled  and  user-provided  Locator-Block  and  Locator-Node Function
	   lengths.

       ip -6 route add 2001:db8:1::/64 encap ioam6 freq 2/5 mode  encap	 tundst
       2001:db8:42::1 trace prealloc type 0x800000 ns 1 size 12 dev eth0
	   Adds	 an  IPv6  route with an IOAM Pre-allocated Trace encapsulation
	   (ip6ip6) that only includes the hop limit and the node  id,	config-
	   ured	 for  the IOAM namespace 1 and a pre-allocated data block of 12
	   octets (will be injected in 2 packets every 5 packets).

       ip route add 10.1.1.0/30 nhid 10
	   Adds an ipv4 route using nexthop object with id 10.

SEE ALSO
       ip(8)

AUTHOR
       Original Manpage by Michail Litvak <mci@owl.openwall.com>

iproute2			  13 Dec 2012			    IP-ROUTE(8)