search..
No manual entry for -- in section 8
DUMPE2FS(8)		    System Manager's Manual		    DUMPE2FS(8)

NAME
       dumpe2fs - dump ext2/ext3/ext4 file system information

SYNOPSIS
       dumpe2fs [ -bfghixV ] [ -o superblock=superblock ] [ -o blocksize=block-
       size ] device

DESCRIPTION
       dumpe2fs	 prints	 the  super  block and blocks group information for the
       file system present on device.

       The device specifier can either be a filename (i.e.,  /dev/sda1),  or  a
       LABEL  or  UUID	specifier: "LABEL=volume-label" or "UUID=uuid".	 (i.e.,
       LABEL=home or UUID=e40486c6-84d5-4f2f-b99c-032281799c9d).

       Note: When used with a mounted file system, the printed information  may
       be old or inconsistent.

OPTIONS
       -b     print the blocks which are reserved as bad in the file system.

       -o superblock=superblock
	      use  the	block  superblock when examining the file system.  This
	      option is not usually needed except by a file system  wizard  who
	      is examining the remains of a very badly corrupted file system.

       -o blocksize=blocksize
	      use  blocks  of  blocksize  bytes when examining the file system.
	      This option is not usually needed except by a file system	 wizard
	      who  is examining the remains of a very badly corrupted file sys-
	      tem.

       -f     force dumpe2fs to display a file system even though it  may  have
	      some  file system feature flags which dumpe2fs may not understand
	      (and which can cause some of dumpe2fs's display to be suspect).

       -g     display the group descriptor information in  a  machine  readable
	      colon-separated value format.  The fields displayed are the group
	      number;  the  number  of	the  first  block in the group; the su-
	      perblock location (or -1 if not present);	 the  range  of	 blocks
	      used  by	the group descriptors (or -1 if not present); the block
	      bitmap location; the inode bitmap	 location;  and	 the  range  of
	      blocks used by the inode table.

       -h     only  display the superblock information and not any of the block
	      group descriptor detail information.

       -i     display the file system data from an image file created by  e2im-
	      age, using device as the pathname to the image file.

       -m     If the mmp feature is enabled on the file system, check if device
	      is  in  use by another node, see e2mmpstatus(8) for full details.
	      If used together with the -i option, only the MMP block  informa-
	      tion is printed.

       -x     print the detailed group information block numbers in hexadecimal
	      format

       -V     print the version number of dumpe2fs and exit.

EXIT CODE
       dumpe2fs	 exits with a return code of 0 if the operation completed with-
       out errors.  It will exit with a non-zero return code if there  are  any
       errors,	such  as problems reading a valid superblock, bad checksums, or
       if the device is in use by another node and -m is specified.

BUGS
       You may need to know the physical file system  structure	 to  understand
       the output.

AUTHOR
       dumpe2fs	 was  written  by  Remy Card <Remy.Card@linux.org>.  It is cur-
       rently being maintained by Theodore Ts'o <tytso@alum.mit.edu>.

AVAILABILITY
       dumpe2fs is  part  of  the  e2fsprogs  package  and  is	available  from
       http://e2fsprogs.sourceforge.net.

SEE ALSO
       e2fsck(8), e2mmpstatus(8), mke2fs(8), tune2fs(8).  ext4(5)

E2fsprogs version 1.47.2	  January 2025			    DUMPE2FS(8)