search..
No manual entry for -- in section 8
APT-GET(8)			      APT			     APT-GET(8)

NAME
       apt-get - APT package handling utility -- command-line interface

SYNOPSIS

       apt-get [-sqdyfmubV] [-o=config_string] [-c=config_file]
	       [-t=target_release] [-a=architecture] {update | upgrade |
	       dselect-upgrade | dist-upgrade |
	       install pkg [{=pkg_version_number | /target_release}]...	 |
	       remove pkg...  | purge pkg...  |
	       source pkg [{=pkg_version_number | /target_release}]...	|
	       build-dep pkg [{=pkg_version_number | /target_release}]...  |
	       download pkg [{=pkg_version_number | /target_release}]...  |
	       check | clean | autoclean | autoremove | {-v | --version} |
	       {-h | --help}}

DESCRIPTION
       apt-get is the command-line tool for handling packages, and may be
       considered the user's "back-end" to other tools using the APT library.
       Several "front-end" interfaces exist, such as aptitude(8), synaptic(8)
       and wajig(1).

       Unless the -h, or --help option is given, one of the commands below must
       be present.

       update
	   update is used to resynchronize the package index files from their
	   sources. The indexes of available packages are fetched from the
	   location(s) specified in /etc/apt/sources.list. For example, when
	   using a Debian archive, this command retrieves and scans the
	   Packages.gz files, so that information about new and updated
	   packages is available. An update should always be performed before
	   an upgrade or dist-upgrade. Please be aware that the overall
	   progress meter will be incorrect as the size of the package files
	   cannot be known in advance.

       upgrade
	   upgrade is used to install the newest versions of all packages
	   currently installed on the system from the sources enumerated in
	   /etc/apt/sources.list. Packages currently installed with new
	   versions available are retrieved and upgraded; under no
	   circumstances are currently installed packages removed, or packages
	   not already installed retrieved and installed. New versions of
	   currently installed packages that cannot be upgraded without
	   changing the install status of another package will be left at their
	   current version. An update must be performed first so that apt-get
	   knows that new versions of packages are available.

	   When a package is supplied as an argument, the package will be
	   installed prior to the upgrade action.

       dist-upgrade
	   dist-upgrade in addition to performing the function of upgrade, also
	   intelligently handles changing dependencies with new versions of
	   packages; apt-get has a "smart" conflict resolution system, and it
	   will attempt to upgrade the most important packages at the expense
	   of less important ones if necessary. The dist-upgrade command may
	   therefore remove some packages. The /etc/apt/sources.list file
	   contains a list of locations from which to retrieve desired package
	   files. See also apt_preferences(5) for a mechanism for overriding
	   the general settings for individual packages.

	   When a package is supplied as an argument, the package will be
	   installed prior to the upgrade action.

       dselect-upgrade
	   dselect-upgrade is used in conjunction with the traditional Debian
	   packaging front-end, dselect(1).  dselect-upgrade follows the
	   changes made by dselect(1) to the Status field of available
	   packages, and performs the actions necessary to realize that state
	   (for instance, the removal of old and the installation of new
	   packages).

       install
	   install is followed by one or more packages desired for installation
	   or upgrading. Each package is a package name, not a fully qualified
	   filename (for instance, in a Debian system, apt-utils would be the
	   argument provided, not apt-utils_3.0.4_amd64.deb). All packages
	   required by the package(s) specified for installation will also be
	   retrieved and installed. The /etc/apt/sources.list file is used to
	   locate the desired packages. If a hyphen is appended to the package
	   name (with no intervening space), the identified package will be
	   removed if it is installed. Similarly a plus sign can be used to
	   designate a package to install. These latter features may be used to
	   override decisions made by apt-get's conflict resolution system.

	   A specific version of a package can be selected for installation by
	   following the package name with an equals and the version of the
	   package to select. This will cause that version to be located and
	   selected for install. Alternatively a specific distribution can be
	   selected by following the package name with a slash and the version
	   of the distribution or the Archive name (stable, testing, unstable).

	   Both of the version selection mechanisms can downgrade packages and
	   must be used with care.

	   This is also the target to use if you want to upgrade one or more
	   already-installed packages without upgrading every package you have
	   on your system. Unlike the "upgrade" target, which installs the
	   newest version of all currently installed packages, "install" will
	   install the newest version of only the package(s) specified. Simply
	   provide the name of the package(s) you wish to upgrade, and if a
	   newer version is available, it (and its dependencies, as described
	   above) will be downloaded and installed.

	   Finally, the apt_preferences(5) mechanism allows you to create an
	   alternative installation policy for individual packages.

	   If no package matches the given expression and the expression
	   contains one of '.', '?' or '*' then it is assumed to be a POSIX
	   regular expression, and it is applied to all package names in the
	   database. Any matches are then installed (or removed). Note that
	   matching is done by substring so 'lo.*' matches 'how-lo' and
	   'lowest'. If this is undesired, anchor the regular expression with a
	   '^' or '$' character, or create a more specific regular expression.

	   Fallback to regular expressions is deprecated in APT 2.0, has been
	   removed in apt(8), except for anchored expressions, and will be
	   removed from apt-get(8) in a future version. Use apt-patterns(7)
	   instead.

       reinstall
	   reinstall is an alias for install --reinstall.

       remove
	   remove is identical to install except that packages are removed
	   instead of installed. Note that removing a package leaves its
	   configuration files on the system. If a plus sign is appended to the
	   package name (with no intervening space), the identified package
	   will be installed instead of removed.

       purge
	   purge is identical to remove except that packages are removed and
	   purged (any configuration files are deleted too).

       source
	   source causes apt-get to fetch source packages. APT will examine the
	   available packages to decide which source package to fetch. It will
	   then find and download into the current directory the newest
	   available version of that source package while respecting the
	   default release, set with the option APT::Default-Release, the -t
	   option or per package with the pkg/release syntax, if possible.

	   The arguments are interpreted as binary and source package names.
	   See the --only-source option if you want to change that.

	   Source packages are tracked separately from binary packages via
	   deb-src lines in the sources.list(5) file. This means that you will
	   need to add such a line for each repository you want to get sources
	   from; otherwise you will probably get either the wrong (too old/too
	   new) source versions or none at all.

	   If the --compile option is specified then the package will be
	   compiled to a binary .deb using dpkg-buildpackage for the
	   architecture as defined by the --host-architecture option. If
	   --download-only is specified then the source package will not be
	   unpacked.

	   A specific source version can be retrieved by postfixing the source
	   name with an equals and then the version to fetch, similar to the
	   mechanism used for the package files. This enables exact matching of
	   the source package name and version, implicitly enabling the
	   APT::Get::Only-Source option.

	   Note that source packages are not installed and tracked in the dpkg
	   database like binary packages; they are simply downloaded to the
	   current directory, like source tarballs.

       build-dep
	   build-dep causes apt-get to install/remove packages in an attempt to
	   satisfy the build dependencies for a source package. By default the
	   dependencies are satisfied to build the package natively. If desired
	   a host-architecture can be specified with the --host-architecture
	   option instead.

	   The arguments are interpreted as binary or source package names. See
	   the --only-source option if you want to change that.

       satisfy
	   satisfy causes apt-get to satisfy the given dependency strings. The
	   dependency strings may have build profiles and architecture
	   restriction list as in build dependencies. They may optionally be
	   prefixed with "Conflicts: " to unsatisfy the dependency string.
	   Multiple strings of the same type can be specified.

	   Example: apt-get satisfy "foo" "Conflicts: bar" "baz (>> 1.0) | bar
	   (= 2.0), moo"

	   The legacy operator '</>' is not supported, use '<=/>=' instead.

       check
	   check is a diagnostic tool; it updates the package cache and checks
	   for broken dependencies.

       download
	   download will download the given binary package into the current
	   directory. The authenticity of the package data is ensured as usual.

       clean
	   clean clears out the local repository of retrieved package files. It
	   removes everything but the lock file from /var/cache/apt/archives/
	   and /var/cache/apt/archives/partial/.

       autoclean (and the auto-clean alias since 1.1)
	   Like clean, autoclean clears out the local repository of retrieved
	   package files. The difference is that it only removes package files
	   that can no longer be downloaded, and are largely useless. This
	   allows a cache to be maintained over a long period without it
	   growing out of control. The configuration option
	   APT::Clean-Installed will prevent installed packages from being
	   erased if it is set to off.

       distclean (and the dist-clean alias)
	   distclean removes all files under /var/lib/apt/lists except Release,
	   Release.gpg, and InRelease. It can be used for example, when
	   finalizing images distributed to users. The release files are kept
	   for security reasons, to prevent various types of attacks.

       autoremove (and the auto-remove alias since 1.1)
	   autoremove is used to remove packages that were automatically
	   installed to satisfy dependencies for other packages and are now no
	   longer needed.

       autopurge
	   Like autoremove, but autopurge also removes configuration files.
	   This is a shortcut for autoremove --purge.

       changelog
	   changelog tries to download the changelog of a package and displays
	   it through sensible-pager. By default it displays the changelog for
	   the version that is installed. However, you can specify the same
	   options as for the install command.

       indextargets
	   Displays by default a deb822 formatted listing of information about
	   all data files (aka index targets) apt-get update would download.
	   Supports a --format option to modify the output format as well as
	   accepts lines of the default output to filter the records by. The
	   command is mainly used as an interface for external tools working
	   with APT to get information as well as filenames for downloaded
	   files so they can use them as well instead of downloading them again
	   on their own. Detailed documentation is omitted here and can instead
	   be found in the file
	   /usr/share/doc/apt/acquire-additional-files.md.gz shipped by the
	   apt-doc package.

OPTIONS
       All command line options may be set using the configuration file, the
       descriptions indicate the configuration option to set. For boolean
       options you can override the config file by using something like
       -f-,--no-f, -f=no or several other variations.

       --no-install-recommends
	   Do not consider recommended packages as a dependency for installing.
	   Configuration Item: APT::Install-Recommends.

       --install-suggests
	   Consider suggested packages as a dependency for installing.
	   Configuration Item: APT::Install-Suggests.

       -d, --download-only
	   Download only; package files are only retrieved, not unpacked or
	   installed. Configuration Item: APT::Get::Download-Only.

       -f, --fix-broken
	   Fix; attempt to correct a system with broken dependencies in place.
	   This option, when used with install/remove, can omit any packages to
	   permit APT to deduce a likely solution. If packages are specified,
	   these have to completely correct the problem. The option is
	   sometimes necessary when running APT for the first time; APT itself
	   does not allow broken package dependencies to exist on a system. It
	   is possible that a system's dependency structure can be so corrupt
	   as to require manual intervention (which usually means using dpkg
	   --remove to eliminate some of the offending packages). Use of this
	   option together with -m may produce an error in some situations.
	   Configuration Item: APT::Get::Fix-Broken.

       -m, --ignore-missing, --fix-missing
	   Ignore missing packages; if packages cannot be retrieved or fail the
	   integrity check after retrieval (corrupted package files), hold back
	   those packages and handle the result. Use of this option together
	   with -f may produce an error in some situations. If a package is
	   selected for installation (particularly if it is mentioned on the
	   command line) and it could not be downloaded then it will be
	   silently held back. Configuration Item: APT::Get::Fix-Missing.

       --no-download
	   Disables downloading of packages. This is best used with
	   --ignore-missing to force APT to use only the .debs it has already
	   downloaded. Configuration Item: APT::Get::Download.

       -q, --quiet
	   Quiet; produces output suitable for logging, omitting progress
	   indicators. More q's will produce more quiet up to a maximum of 2.
	   You can also use -q=# to set the quiet level, overriding the
	   configuration file. Note that quiet level 2 implies -y; you should
	   never use -qq without a no-action modifier such as -d, --print-uris
	   or -s as APT may decide to do something you did not expect.
	   Configuration Item: quiet.

       -s, --simulate, --just-print, --dry-run, --recon, --no-act
	   No action; perform a simulation of events that would occur based on
	   the current system state but do not actually change the system.
	   Locking will be disabled (Debug::NoLocking) so the system state
	   could change while apt-get is running. Simulations can also be
	   executed by non-root users which might not have read access to all
	   apt configuration distorting the simulation. A notice expressing
	   this warning is also shown by default for non-root users
	   (APT::Get::Show-User-Simulation-Note). Configuration Item:
	   APT::Get::Simulate.

	   Simulated runs print out a series of lines, each representing a dpkg
	   operation: configure (Conf), remove (Remv) or unpack (Inst). Square
	   brackets indicate broken packages, and empty square brackets
	   indicate breaks that are of no consequence (rare).

       -y, --yes, --assume-yes
	   Automatic yes to prompts; assume "yes" as answer to all prompts and
	   run non-interactively. If an undesirable situation, such as changing
	   a held package, trying to install an unauthenticated package or
	   removing an essential package occurs then apt-get will abort.
	   Configuration Item: APT::Get::Assume-Yes.

       --assume-no
	   Automatic "no" to all prompts. Configuration Item:
	   APT::Get::Assume-No.

       --no-show-upgraded
	   Do not show a list of all packages that are to be upgraded.
	   Configuration Item: APT::Get::Show-Upgraded.

       -V, --verbose-versions
	   Show full versions for upgraded and installed packages.
	   Configuration Item: APT::Get::Show-Versions.

       --no-list-columns
	   Display package lists without arranging them in columns. By default,
	   package lists are printed in the style of the "ls" command.
	   Configuration Item: APT::Get::List-Columns.

       --comment
	   Add the given value to the Comment: field in history.log
	   Configuration Item: APT::History::Comment.

       -a, --host-architecture
	   This option controls the architecture packages are built for by
	   apt-get source --compile and how cross-builddependencies are
	   satisfied. By default is it not set which means that the host
	   architecture is the same as the build architecture (which is defined
	   by APT::Architecture). Configuration Item:
	   APT::Get::Host-Architecture.

       -P, --build-profiles
	   This option controls the activated build profiles for which a source
	   package is built by apt-get source --compile and how build
	   dependencies are satisfied. By default no build profile is active.
	   More than one build profile can be activated at a time by
	   concatenating them with a comma. Configuration Item:
	   APT::Build-Profiles.

       -b, --compile, --build
	   Compile source packages after downloading them. Configuration Item:
	   APT::Get::Compile.

       --ignore-hold
	   Ignore package holds; this causes apt-get to ignore a hold placed on
	   a package. This may be useful in conjunction with dist-upgrade to
	   override a large number of undesired holds. Configuration Item:
	   APT::Ignore-Hold.

       --with-new-pkgs
	   Allow installing new packages when used in conjunction with upgrade.
	   This is useful if the update of an installed package requires new
	   dependencies to be installed. Instead of holding the package back
	   upgrade will upgrade the package and install the new dependencies.
	   Note that upgrade with this option will never remove packages, only
	   allow adding new ones. Configuration Item:
	   APT::Get::Upgrade-Allow-New.

       --no-upgrade
	   Do not upgrade packages; when used in conjunction with install,
	   no-upgrade will prevent packages on the command line from being
	   upgraded if they are already installed. Configuration Item:
	   APT::Get::Upgrade.

       --only-upgrade
	   Do not install new packages; when used in conjunction with install,
	   only-upgrade will install upgrades for already installed packages
	   only and ignore requests to install new packages. Configuration
	   Item: APT::Get::Only-Upgrade.

       --allow-downgrades
	   This is a dangerous option that will cause apt to continue without
	   prompting if it is doing downgrades. It should not be used except in
	   very special situations. Using it can potentially destroy your
	   system! Configuration Item: APT::Get::allow-downgrades. Introduced
	   in APT 1.1.

       --allow-remove-essential
	   Force yes; this is a dangerous option that will cause apt to
	   continue without prompting if it is removing essentials. It should
	   not be used except in very special situations. Using it can
	   potentially destroy your system! Configuration Item:
	   APT::Get::allow-remove-essential. Introduced in APT 1.1.

       --allow-change-held-packages
	   Force yes; this is a dangerous option that will cause apt to
	   continue without prompting if it is changing held packages. It
	   should not be used except in very special situations. Using it can
	   potentially destroy your system! Configuration Item:
	   APT::Get::allow-change-held-packages. Introduced in APT 1.1.

       --force-yes
	   Force yes; this is a dangerous option that will cause apt to
	   continue without prompting if it is doing something potentially
	   harmful. It should not be used except in very special situations.
	   Using force-yes can potentially destroy your system! Configuration
	   Item: APT::Get::force-yes. This is deprecated and replaced by
	   --allow-unauthenticated , --allow-downgrades ,
	   --allow-remove-essential , --allow-change-held-packages in 1.1.

       --print-uris
	   Instead of fetching the files to install their URIs are printed.
	   Each URI will have the path, the destination file name, the size and
	   the expected MD5 hash. Note that the file name to write to will not
	   always match the file name on the remote site! This also works with
	   the source and update commands. When used with the update command
	   the MD5 and size are not included, and it is up to the user to
	   decompress any compressed files. Configuration Item:
	   APT::Get::Print-URIs.

       --purge
	   Use purge instead of remove for anything that would be removed. An
	   asterisk ("*") will be displayed next to packages which are
	   scheduled to be purged.  remove --purge is equivalent to the purge
	   command. Configuration Item: APT::Get::Purge.

       --reinstall
	   Re-install packages that are already installed and at the newest
	   version. Configuration Item: APT::Get::ReInstall.

       --list-cleanup
	   This option is on by default; use --no-list-cleanup to turn it off.
	   When it is on, apt-get will automatically manage the contents of
	   /var/lib/apt/lists to ensure that obsolete files are erased. The
	   only reason to turn it off is if you frequently change your sources
	   list. Configuration Item: APT::Get::List-Cleanup.

       -S, --snapshot
	   This option controls the snapshot chosen for archives with Snapshot:
	   enable in the source entry. For example, -S 20220102T030405Z selects
	   a snapshot from January 2nd, 2022 at 03:04:05 UTC. Configuration
	   Item: APT::Snapshot; see also the sources.list(5) manual page.

       -t, --target-release, --default-release
	   This option controls the default input to the policy engine; it
	   creates a default pin at priority 990 using the specified release
	   string. This overrides the general settings in /etc/apt/preferences.
	   Specifically pinned packages are not affected by the value of this
	   option. In short, this option lets you have simple control over
	   which distribution packages will be retrieved from. Some common
	   examples might be -t '2.1*', -t unstable or -t sid. Configuration
	   Item: APT::Default-Release; see also the apt_preferences(5) manual
	   page.

       --trivial-only
	   Only perform operations that are 'trivial'. Logically this can be
	   considered related to --assume-yes; where --assume-yes will answer
	   yes to any prompt, --trivial-only will answer no. Configuration
	   Item: APT::Get::Trivial-Only.

       --mark-auto
	   After successful installation, mark all freshly installed packages
	   as automatically installed, which will cause each of the packages to
	   be removed when no more manually installed packages depend on this
	   package. This is equally to running apt-mark auto for all installed
	   packages. Configuration Item: APT::Get::Mark-Auto.

       --no-remove
	   If any packages are to be removed apt-get immediately aborts without
	   prompting. Configuration Item: APT::Get::Remove.

       --auto-remove, --autoremove
	   If the command is either install or remove, then this option acts
	   like running the autoremove command, removing unused dependency
	   packages. Configuration Item: APT::Get::AutomaticRemove.

       --only-source
	   Only has meaning for the source and build-dep commands. Indicates
	   that the given source names are not to be mapped through the binary
	   table. This means that if this option is specified, these commands
	   will only accept source package names as arguments, rather than
	   accepting binary package names and looking up the corresponding
	   source package. Configuration Item: APT::Get::Only-Source.

       --diff-only, --dsc-only, --tar-only
	   Download only the diff, dsc, or tar file of a source archive.
	   Configuration Item: APT::Get::Diff-Only, APT::Get::Dsc-Only, and
	   APT::Get::Tar-Only.

       --arch-only
	   Only process architecture-dependent build-dependencies.
	   Configuration Item: APT::Get::Arch-Only.

       --indep-only
	   Only process architecture-independent build-dependencies.
	   Configuration Item: APT::Get::Indep-Only.

       --allow-unauthenticated
	   Ignore if packages can't be authenticated and don't prompt about it.
	   This can be useful while working with local repositories, but is a
	   huge security risk if data authenticity isn't ensured in another way
	   by the user itself. The usage of the Trusted option for
	   sources.list(5) entries should usually be preferred over this global
	   override. Configuration Item: APT::Get::AllowUnauthenticated.

       --allow-insecure-repositories
	   Allow the update command to acquire unverifiable data from
	   configured sources. APT will otherwise fail at the update command
	   for repositories without valid cryptographically signatures. See
	   also apt-secure(8) for details on the concept and the implications.
	   Configuration Item: Acquire::AllowInsecureRepositories.

       --allow-releaseinfo-change
	   Allow the update command to continue downloading data from a
	   repository which changed its information of the release contained in
	   the repository indicating e.g a new major release. APT will fail at
	   the update command for such repositories until the change is
	   confirmed to ensure the user is prepared for the change. See also
	   apt-secure(8) for details on the concept and configuration.

	   Specialist options (--allow-releaseinfo-change-field) exist to allow
	   changes only for certain fields like origin, label, codename, suite,
	   version and defaultpin. See also apt_preferences(5). Configuration
	   Item: Acquire::AllowReleaseInfoChange.

       --show-progress
	   Show user friendly progress information in the terminal window when
	   packages are installed, upgraded or removed. For a machine parsable
	   version of this data see README.progress-reporting in the apt doc
	   directory. Configuration Items: Dpkg::Progress and
	   Dpkg::Progress-Fancy.

       --with-source filename
	   Adds the given file as a source for metadata. Can be repeated to add
	   multiple files. See --with-source description in apt-cache(8) for
	   further details.

       -eany, --error-on=any
	   Fail the update command if any error occured, even a transient one.

       -U, --update
	   Run the update command before the specified command. This is
	   supported for commands installing, removing, or upgrading packages
	   such as install, remove, safe-upgrade, full-upgrade. This can be
	   useful to ensure a command always installs the latest versions, or,
	   in combination with the --snapshot option to make sure the snapshot
	   is present when install is being run.

	   Caveat: Due to technical limitations, locks are acquired
	   individually for each phase, hence an install may fail to acquire
	   locks after successfully executing the update. Until this is
	   resolved, this is merely syntactic sugar for apt update && apt
	   install

       -h, --help
	   Show a short usage summary.

       -v, --version
	   Show the program version.

       --audit
	   Show audit (and notice) messages. This overrides the quiet option,
	   but only for notice messages, not progress ones.

       -c, --config-file
	   Configuration File; Specify a configuration file to use. The program
	   will read the default configuration file and then this configuration
	   file. If configuration settings need to be set before the default
	   configuration files are parsed specify a file with the APT_CONFIG
	   environment variable. See apt.conf(5) for syntax information.

       -o, --option
	   Set a Configuration Option; This will set an arbitrary configuration
	   option. The syntax is -o Foo::Bar=bar.  -o and --option can be used
	   multiple times to set different options.

       --no-color, --color
	   Turn colors on or off. Colors are on by default on supported
	   terminals for apt(8) and can also be disabled using the NO_COLOR or
	   APT_NO_COLOR environment variables, or further configured by the
	   APT::Color configuration option and scope, see apt.conf(5) for
	   information on that.

FILES
       /etc/apt/sources.list
	   Locations to fetch packages from. Configuration Item:
	   Dir::Etc::SourceList.

       /etc/apt/sources.list.d/
	   File fragments for locations to fetch packages from. Configuration
	   Item: Dir::Etc::SourceParts.

       /etc/apt/apt.conf
	   APT configuration file. Configuration Item: Dir::Etc::Main.

       /etc/apt/apt.conf.d/
	   APT configuration file fragments. Configuration Item:
	   Dir::Etc::Parts.

       /etc/apt/preferences
	   Version preferences file. This is where you would specify "pinning",
	   i.e. a preference to get certain packages from a separate source or
	   from a different version of a distribution. Configuration Item:
	   Dir::Etc::Preferences.

       /etc/apt/preferences.d/
	   File fragments for the version preferences. Configuration Item:
	   Dir::Etc::PreferencesParts.

       /var/cache/apt/archives/
	   Storage area for retrieved package files. Configuration Item:
	   Dir::Cache::Archives.

       /var/cache/apt/archives/partial/
	   Storage area for package files in transit. Configuration Item:
	   Dir::Cache::Archives (partial will be implicitly appended)

       /var/lib/apt/lists/
	   Storage area for state information for each package resource
	   specified in sources.list(5) Configuration Item: Dir::State::Lists.

       /var/lib/apt/lists/partial/
	   Storage area for state information in transit. Configuration Item:
	   Dir::State::Lists (partial will be implicitly appended)

SEE ALSO
       apt-cache(8), apt-cdrom(8), dpkg(1), sources.list(5), apt.conf(5), apt-
       patterns(7), apt-config(8), apt-secure(8), The APT User's guide in
       /usr/share/doc/apt-doc/, apt_preferences(5), the APT Howto.

DIAGNOSTICS
       apt-get returns zero on normal operation, decimal 100 on error.

BUGS
       APT bug page[1]. If you wish to report a bug in APT, please see
       /usr/share/doc/debian/bug-reporting.txt or the reportbug(1) command.

AUTHORS
       Jason Gunthorpe

       APT team

NOTES
	1. APT bug page
	   https://bugs.debian.org/src:apt

APT 3.0.4			18 November 2024		     APT-GET(8)