search..
No manual entry for -- in section 7
SYSTEMD.S...CREDENTIALS(7) systemd.system-credentialsSYSTEMD.S...CREDENTIALS(7)

NAME
       systemd.system-credentials - System Credentials

DESCRIPTION
       System and Service Credentials[1] are data objects that may be passed
       into booted systems or system services as they are invoked. They can be
       acquired from various external sources, and propagated into the system
       and from there into system services. Credentials may optionally be
       encrypted with a machine-specific key and/or locked to the local TPM2
       device, and are only decrypted when the consuming service is invoked.

       System credentials may be used to provision and configure various
       aspects of the system. Depending on the consuming component credentials
       are only used on initial invocations or are needed for all invocations.

       Credentials may be used for any kind of data, binary or text, and may
       carry passwords, secrets, certificates, cryptographic key material,
       identity information, configuration, and more.

WELL KNOWN SYSTEM CREDENTIALS
       firstboot.keymap
	   The console key mapping to set (e.g.	 "de"). Read by systemd-
	   firstboot(1), and only honoured if no console keymap has been
	   configured before.

	   Added in version 252.

       firstboot.locale, firstboot.locale-messages
	   The system locale to set (e.g.  "de_DE.UTF-8"). Read by systemd-
	   firstboot(1), and only honoured if no locale has been configured
	   before.  firstboot.locale sets "LANG", while
	   firstboot.locale-message sets "LC_MESSAGES".

	   Added in version 252.

       firstboot.timezone
	   The system timezone to set (e.g.  "Europe/Berlin"). Read by systemd-
	   firstboot(1), and only honoured if no system timezone has been
	   configured before.

	   Added in version 252.

       login.issue
	   The data of this credential is written to
	   /etc/issue.d/50-provision.conf, if the file does not exist yet.
	   agetty(8) reads this file and shows its contents at the login prompt
	   of terminal logins. See issue(5) for details.

	   Consumed by /usr/lib/tmpfiles.d/provision.conf, see tmpfiles.d(5).

	   Added in version 252.

       login.motd
	   The data of this credential is written to
	   /etc/motd.d/50-provision.conf, if the file does not exist yet.
	   pam_motd(8) reads this file and shows its contents as "message of
	   the day" during terminal logins. See motd(5) for details.

	   Consumed by /usr/lib/tmpfiles.d/provision.conf, see tmpfiles.d(5).

	   Added in version 252.

       network.hosts
	   The data of this credential is written to /etc/hosts, if the file
	   does not exist yet. See hosts(5) for details.

	   Consumed by /usr/lib/tmpfiles.d/provision.conf, see tmpfiles.d(5).

	   Added in version 252.

       network.dns, network.search_domains
	   DNS server information and search domains. Read by systemd-
	   resolved.service(8).

	   Added in version 253.

       network.conf.*, network.link.*, network.netdev.*, network.network.*
	   Configures network devices. Read by systemd-network-
	   generator.service(8). These credentials should contain valid
	   networkd.conf(5), systemd.link(5), systemd.netdev(5),
	   systemd.network(5) configuration data. From each matching credential
	   a separate file is created. Example: the contents of a credential
	   network.link.50-foobar will be copied into a file 50-foobar.link.

	   Note that the resulting files are created world-readable, it is
	   hence recommended to not include secrets in these credentials, but
	   supply them via separate credentials directly to
	   systemd-networkd.service, e.g.  network.wireguard.*	as described
	   below.

	   Added in version 256.

       network.wireguard.*
	   Configures secrets for WireGuard netdevs. Read by systemd-
	   networkd.service(8). For more information, refer to the [WireGuard]
	   section of systemd.netdev(5).

	   Added in version 256.

       passwd.hashed-password.root, passwd.plaintext-password.root
	   May contain the password (either in UNIX hashed format, or in
	   plaintext) for the root users. Read by both systemd-firstboot(1) and
	   systemd-sysusers(8), and only honoured if no root password has been
	   configured before.

	   Added in version 252.

       passwd.shell.root
	   The path to the shell program (e.g.	"/bin/bash") for the root user.
	   Read by both systemd-firstboot(1) and systemd-sysusers(8), and only
	   honoured if no root shell has been configured before.

	   Added in version 252.

       ssh.ephemeral-authorized_keys-all
	   Provides additional public keys, given in the customary
	   authorized_keys format, for all users, for incoming connections via
	   the generated AF_VSOCK and AF_UNIX socket units.

	   The intended use of this is for a host system (in either VM or
	   container configurations) to generate a keypair and inject the
	   public key into the guest, using the private key to connect to any
	   user account on the guest via ssh, without further authentication.

	   Consumed by systemd-ssh-generator(8).

	   Added in version 256.

       ssh.authorized_keys.root
	   The data of this credential is written to
	   /root/.ssh/authorized_keys, if the file does not exist yet. This
	   allows provisioning SSH access for the system's root user.

	   Consumed by /usr/lib/tmpfiles.d/provision.conf, see tmpfiles.d(5).

	   Added in version 252.

       ssh.listen
	   May be used to configure SSH sockets the system shall be reachable
	   on. See systemd-ssh-generator(8) for details.

	   Added in version 256.

       sysusers.extra
	   Additional sysusers.d(5) lines to process during boot.

	   Added in version 252.

       sysctl.extra
	   Additional sysctl.d(5) lines to process during boot.

	   Added in version 252.

       tmpfiles.extra
	   Additional tmpfiles.d(5) lines to process during boot.

	   Added in version 252.

       fstab.extra
	   Additional mounts to establish at boot. For details, see systemd-
	   fstab-generator(8).

	   Added in version 254.

       vconsole.keymap, vconsole.keymap_toggle, vconsole.font,
       vconsole.font_map, vconsole.font_unimap
	   Console settings to apply, see systemd-vconsole-setup.service(8) for
	   details.

	   Added in version 253.

       getty.ttys.serial, getty.ttys.container
	   Used for spawning additional login prompts, see systemd-getty-
	   generator(8) for details.

	   Added in version 254.

       journal.forward_to_socket
	   Used by systemd-journald(8) to determine where to forward log
	   messages for socket forwarding, see journald.conf(5) for details.

	   Added in version 256.

       journal.storage
	   Used by systemd-journald(8) to determine where to store journal
	   files, see journald.conf(5) for details.

	   Added in version 256.

       vmm.notify_socket
	   Configures an sd_notify(3) compatible AF_VSOCK socket the service
	   manager will report status information, ready notification and exit
	   status on. For details see systemd(1).

	   Added in version 253.

       shell.prompt.prefix, shell.prompt.suffix
	   Defines strings to prefix and suffix any interactive UNIX shell
	   prompt with. For details see pam_systemd(8).

	   Added in version 257.

       shell.welcome
	   Define a string to print when an interactive UNIX shell initializes.
	   For details see pam_systemd(8).

	   Added in version 257.

       system.machine_id
	   Takes a 128bit ID to initialize the machine ID from (if it is not
	   set yet). Interpreted by the service manager (PID 1). For details
	   see systemd(1).

	   Added in version 254.

       system.hostname
	   Accepts a (transient) hostname to configure during early boot. The
	   static hostname specified in /etc/hostname, if configured, takes
	   precedence over this setting. Interpreted by the service manager
	   (PID 1). For details see systemd(1).

	   Added in version 254.

       home.create.*
	   Creates a home area for the specified user with the user record data
	   passed in. For details see homectl(1).

	   Added in version 256.

       cryptsetup.passphrase, cryptsetup.tpm2-pin, cryptsetup.fido2-pin,
       cryptsetup.pkcs11-pin, cryptsetup.luks2-pin
	   Specifies the passphrase/PINs to use for unlock encrypted storage
	   volumes. For details see systemd-cryptsetup(8).

	   Added in version 256.

       systemd.extra-unit.*, systemd.unit-dropin.*
	   These credentials specify extra units and drop-ins to add to the
	   system. For details see systemd-debug-generator(8).

	   Added in version 256.

       udev.conf.*, udev.rules.*
	   Configures udev configuration file and udev rules. Read by
	   systemd-udev-load-credentials.service, which invokes udevadm control
	   --load-credentials. These credentials directly translate to a
	   matching udev.conf(5) or udev(7) rules file. Example: the contents
	   of a credential udev.conf.50-foobar will be copied into a file
	   /run/udev/udev.conf.d/50-foobar.conf, and udev.rules.50-foobar will
	   be copied into a file /run/udev/rules.d/50-foobar.rules. See
	   udev(7), udev.conf(5), and udevadm(8) for details.

	   Added in version 256.

       import.pull
	   Specified disk images (tarballs and DDIs) to automatically download
	   and install at boot. For details see systemd-import-generator(8).

	   Added in version 257.

SEE ALSO
       systemd(1), kernel-command-line(7), smbios-type-11(7)

NOTES
	1. System and Service Credentials
	   https://systemd.io/CREDENTIALS

systemd 257.13					     SYSTEMD.S...CREDENTIALS(7)