search..
No manual entry for -- in section 7
standards(7)		Miscellaneous Information Manual	   standards(7)

NAME
       standards - C and UNIX Standards

DESCRIPTION
       The STANDARDS section that appears in many manual pages identifies vari-
       ous standards to which the documented interface conforms.  The following
       list briefly describes these standards.

       V7     Version  7  (also	 known	as  Seventh  Edition) UNIX, released by
	      AT&T/Bell Labs in 1979.  After this point, UNIX systems  diverged
	      into two main dialects: BSD and System V.

       4.2BSD This  is an implementation standard defined by the 4.2 release of
	      the Berkeley Software Distribution, released by the University of
	      California at Berkeley.  This was the first Berkeley release that
	      contained a TCP/IP stack and the sockets	API.   4.2BSD  was  re-
	      leased in 1983.

	      Earlier major BSD releases included 3BSD (1980), 4BSD (1980), and
	      4.1BSD (1981).

       4.3BSD The successor to 4.2BSD, released in 1986.

       4.4BSD The successor to 4.3BSD, released in 1993.  This was the last ma-
	      jor Berkeley release.

       System V
	      This  is	an  implementation standard defined by AT&T's milestone
	      1983 release of its commercial System V (five) release.  The pre-
	      vious major AT&T release was System III, released in 1981.

       System V release 2 (SVr2)
	      This was the next System V release, made in 1985.	 The  SVr2  was
	      formally described in the System V Interface Definition version 1
	      (SVID 1) published in 1985.

       System V release 3 (SVr3)
	      This  was	 the successor to SVr2, released in 1986.  This release
	      was formally described in the System V Interface Definition  ver-
	      sion 2 (SVID 2).

       System V release 4 (SVr4)
	      This  was	 the successor to SVr3, released in 1989.  This version
	      of System V is described in the "Programmer's  Reference	Manual:
	      Operating	 System	 API  (Intel  processors)" (Prentice-Hall 1992,
	      ISBN 0-13-951294-2) This release was formally  described	in  the
	      System  V Interface Definition version 3 (SVID 3), and is consid-
	      ered the definitive System V release.

       SVID 4 System V Interface Definition version 4, issued in 1995.	 Avail-
	      able online at http://www.sco.com/developers/devspecs/.

       C89    This  was the first C language standard, ratified by ANSI (Ameri-
	      can National Standards Institute) in 1989	 (X3.159-1989).	  Some-
	      times  this  is  known  as  ANSI C, but since C99 is also an ANSI
	      standard, this term is ambiguous.	 This standard was  also  rati-
	      fied  by	ISO  (International  Standards	Organization)  in  1990
	      (ISO/IEC 9899:1990), and is thus occasionally referred to as  ISO
	      C90.

       C99    This  revision  of the C language standard was ratified by ISO in
	      1999    (ISO/IEC	   9899:1999).	    Available	  online     at
	      http://www.open-std.org/jtc1/sc22/wg14/www/standards.

       C11    This  revision  of the C language standard was ratified by ISO in
	      2011 (ISO/IEC 9899:2011).

       LFS    The Large File Summit specification,  completed  in  1996.   This
	      specification  defined  mechanisms that allowed 32-bit systems to
	      support the use of large files (i.e., 64-bit file offsets).   See
	      https://www.opengroup.org/platform/lfs.html.

       POSIX.1-1988
	      This  was	 the first POSIX standard, ratified by IEEE as IEEE Std
	      1003.1-1988, and subsequently adopted (with minor	 revisions)  as
	      an  ISO standard in 1990.	 The term "POSIX" was coined by Richard
	      Stallman.

       POSIX.1-1990
	      "Portable Operating System Interface for Computing Environments".
	      IEEE 1003.1-1990	part  1,  ratified  by	ISO  in	 1990  (ISO/IEC
	      9945-1:1990).

       POSIX.2
	      IEEE Std 1003.2-1992, describing commands and utilities, ratified
	      by ISO in 1993 (ISO/IEC 9945-2:1993).

       POSIX.1b (formerly known as POSIX.4)
	      IEEE   Std  1003.1b-1993,	 describing  real-time	facilities  for
	      portable operating systems, ratified  by	ISO  in	 1996  (ISO/IEC
	      9945-1:1996).

       POSIX.1c (formerly known as POSIX.4a)
	      IEEE  Std	 1003.1c-1995, which describes the POSIX threads inter-
	      faces.

       POSIX.1d
	      IEEE Std 1003.1d-1999, which describes additional	 real-time  ex-
	      tensions.

       POSIX.1g
	      IEEE Std 1003.1g-2000, which describes networking APIs (including
	      sockets).

       POSIX.1j
	      IEEE  Std 1003.1j-2000, which describes advanced real-time exten-
	      sions.

       POSIX.1-1996
	      A 1996  revision	of  POSIX.1  which  incorporated  POSIX.1b  and
	      POSIX.1c.

       XPG3   Released in 1989, this was the first release of the X/Open Porta-
	      bility  Guide  to	 be  based  on a POSIX standard (POSIX.1-1988).
	      This multivolume guide was developed by the X/Open Group, a  mul-
	      tivendor consortium.

       XPG4   A	 revision  of  the  X/Open Portability Guide, released in 1992.
	      This revision incorporated POSIX.2.

       XPG4v2 A 1994 revision of XPG4.	This is also referred to as Spec  1170,
	      where  1170  referred to the number of interfaces defined by this
	      standard.

       SUS (SUSv1)
	      Single UNIX Specification.  This was a repackaging of XPG4v2  and
	      other  X/Open  standards (X/Open Curses Issue 4 version 2, X/Open
	      Networking Service (XNS) Issue 4).  Systems  conforming  to  this
	      standard can be branded UNIX 95.

       SUSv2  Single  UNIX Specification version 2.  Sometimes also referred to
	      (incorrectly) as XPG5.  This standard appeared in 1997.	Systems
	      conforming  to  this  standard  can be branded UNIX 98.  See also
	      http://www.unix.org/version2/.)

       POSIX.1-2001
       SUSv3  This was a  2001	revision  and  consolidation  of  the  POSIX.1,
	      POSIX.2,	and SUS standards into a single document, conducted un-
	      der the auspices of  the	Austin	Group  http://www.opengroup.org
	      /austin/.	     The    standard	is    available	   online    at
	      http://www.unix.org/version3/.

	      The standard defines two levels  of  conformance:	 POSIX	confor-
	      mance,  which  is a baseline set of interfaces required of a con-
	      forming system; and XSI Conformance, which additionally  mandates
	      a set of interfaces (the "XSI extension") which are only optional
	      for  POSIX  conformance.	 XSI-conformant	 systems can be branded
	      UNIX 03.

	      The POSIX.1-2001 document is broken into four parts:

	      XBD: Definitions, terms, and  concepts,  header  file  specifica-
	      tions.

	      XSH:  Specifications of functions (i.e., system calls and library
	      functions in actual implementations).

	      XCU: Specifications of commands and  utilities  (i.e.,  the  area
	      formerly described by POSIX.2).

	      XRAT: Informative text on the other parts of the standard.

	      POSIX.1-2001  is	aligned	 with  C99,  so that all of the library
	      functions	 standardized  in  C99	 are   also   standardized   in
	      POSIX.1-2001.

	      The  Single  UNIX	 Specification	version 3 (SUSv3) comprises the
	      Base Specifications containing XBD, XSH, XCU, and XRAT as	 above,
	      plus  X/Open  Curses Issue 4 version 2 as an extra volume that is
	      not in POSIX.1-2001.

	      Two Technical Corrigenda (minor fixes and	 improvements)	of  the
	      original	2001  standard	have  occurred:	 TC1 in 2003 and TC2 in
	      2004.

       POSIX.1-2008
       SUSv4  Work on the next revision of POSIX.1/SUS was completed and  rati-
	      fied   in	  2008.	   The	 standard   is	 available   online  at
	      http://www.unix.org/version4/.

	      The changes in this revision are not as large as those  that  oc-
	      curred for POSIX.1-2001/SUSv3, but a number of new interfaces are
	      added  and  various  details of existing specifications are modi-
	      fied.  Many of the interfaces that were optional in  POSIX.1-2001
	      become mandatory in the 2008 revision of the standard.  A few in-
	      terfaces	that are present in POSIX.1-2001 are marked as obsolete
	      in POSIX.1-2008, or removed from the standard altogether.

	      The revised standard is structured in the same way as its	 prede-
	      cessor.	The  Single  UNIX  Specification version 4 (SUSv4) com-
	      prises the Base Specifications  containing  XBD,	XSH,  XCU,  and
	      XRAT,  plus  X/Open Curses Issue 7 as an extra volume that is not
	      in POSIX.1-2008.

	      Again there are two levels of  conformance:  the	baseline  POSIX
	      Conformance,  and	 XSI  Conformance, which mandates an additional
	      set of interfaces beyond those in the base specification.

	      In general, where the STANDARDS section of a  manual  page  lists
	      POSIX.1-2001,  it can be assumed that the interface also conforms
	      to POSIX.1-2008, unless otherwise noted.

	      Technical Corrigendum 1 (minor fixes and	improvements)  of  this
	      standard was released in 2013.

	      Technical Corrigendum 2 of this standard was released in 2016.

	      Further  information  can	 be found on the Austin Group web site,
	      http://www.opengroup.org/austin/.

       SUSv4 2016 edition
	      This is equivalent to POSIX.1-2008, with the addition of	Techni-
	      cal Corrigenda 1 and 2 and the XCurses specification.

       POSIX.1-2017
	      This  revision  of POSIX is technically identical to POSIX.1-2008
	      with Technical Corrigenda 1 and 2 applied.

       SUSv4 2018 edition
	      This is equivalent to POSIX.1-2017,  with	 the  addition	of  the
	      XCurses specification.

       The  interfaces	documented in POSIX.1/SUS are available as manual pages
       under sections 0p (header files), 1p  (commands),  and  3p  (functions);
       thus one can write "man 3p open".

SEE ALSO
       getconf(1),  confstr(3),	 pathconf(3),  sysconf(3),  attributes(7), fea-
       ture_test_macros(7), libc(7), posixoptions(7), system_data_types(7)

Linux man-pages 6.9.1		   2024-05-02			   standards(7)