search..
No manual entry for -- in section 7
troff:<standard input>:138: warning [p 2, 9.8i]: cannot adjust line
troff:<standard input>:140: warning [p 2, 10.3i]: cannot adjust line
troff:<standard input>:142: warning [p 2, 10.8i]: cannot adjust line
troff:<standard input>:146: warning [p 3, 0.2i]: cannot adjust line
troff:<standard input>:148: warning [p 3, 0.5i]: cannot adjust line
pcilib(7)		       The PCI Utilities		      pcilib(7)

NAME
       pcilib - a library for accessing PCI devices

DESCRIPTION
       The  PCI library (also known as pcilib and libpci) is a portable library
       for accessing PCI devices and their configuration space.

ACCESS METHODS
       The library supports a variety of methods to  access  the  configuration
       space  on  different  operating	systems. By default, the first matching
       method in this list is used, but you can specify override  the  decision
       (see the -A switch of lspci).

       linux-sysfs
	      The  /sys	 filesystem on Linux 2.6 and newer. The standard header
	      of the config space is available to all users, the rest  only  to
	      root.  Supports  extended	 configuration	space, PCI domains, VPD
	      (from Linux 2.6.26), physical slots (also since Linux 2.6.26) and
	      information on attached kernel drivers.

       linux-proc
	      The /proc/bus/pci interface supported by Linux 2.1 and newer. The
	      standard header of the config space is available	to  all	 users,
	      the rest only to root.

       intel-conf1
	      Direct  hardware	access	via  Intel  configuration  mechanism 1.
	      Available on i386 and  compatibles  on  Linux,  Solaris/x86,  GNU
	      Hurd, Windows, BeOS and Haiku. Requires root privileges.

       intel-conf2
	      Direct  hardware	access	via  Intel  configuration  mechanism 2.
	      Available on i386 and  compatibles  on  Linux,  Solaris/x86,  GNU
	      Hurd, Windows, BeOS and Haiku. Requires root privileges. Warning:
	      This  method  is able to address only the first 16 devices on any
	      bus and it seems to be very unreliable in many cases.

       mmio-conf1
	      Direct hardware access via Intel configuration  mechanism	 1  via
	      memory-mapped  I/O.   Mostly used on non-i386 platforms. Requires
	      root privileges. Warning: This method needs to be	 properly  con-
	      figured via the mmio-conf1.addrs parameter.

       mmio-conf1-ext
	      Direct  hardware	access	via  Extended  PCIe Intel configuration
	      mechanism 1 via memory-mapped I/O.  Mostly used on non-i386 plat-
	      forms. Requires root privileges. Warning: This method needs to be
	      properly configured via the mmio-conf1-ext.addrs parameter.

       ecam   Direct hardware access via PCIe ECAM (Enhanced Configuration  Ac-
	      cess  Mechanism).	  Available on all PCIe-compliant hardware. Re-
	      quires root privileges and access to physical  memory  (on  Linux
	      systems disabled CONFIG_STRICT_DEVMEM option). On ACPI compatible
	      systems is ECAM mapping read from the MCFG table specified by the
	      ecam.acpimcfg parameter. On EFI compatible systems, ACPI MCFG ta-
	      ble can be located in physical memory via EFI system table speci-
	      fied  by the ecam.efisystab parameter. On FreeBSD/NetBSD systems,
	      physical address of ACPI MCFG table can be  located  by  kenv  or
	      sysctl  interface when the ecam.bsd parameter is not disabled. On
	      x86 BIOS compatible systems, ACPI MCFG table can	be  located  in
	      physical memory by scanning x86 BIOS memory when the ecam.x86bios
	      parameter	 is  not  disabled.  Alternatively ECAM mappings can be
	      specified by the ecam.addrs parameter which takes precedence over
	      ACPI MCFG table. This option is required on systems without  ACPI
	      and also on systems without EFI or x86 BIOS.

       fbsd-device
	      The /dev/pci device on FreeBSD. Requires root privileges.

       aix-device
	      Access method used on AIX. Requires root privileges.

       nbsd-libpci
	      The  /dev/pci0  device  on NetBSD accessed using the local libpci
	      library.

       obsd-device
	      The /dev/pci device on OpenBSD. Requires root privileges.

       dump   Read the contents of configuration registers from a  file	 speci-
	      fied  in	the  dump.name parameter. The format corresponds to the
	      output of lspci -x.

       darwin Access method used on Mac OS X / Darwin. Must be run as root  and
	      the system must have been booted with debug=0x144.

       win32-cfgmgr32
	      Device listing on Windows systems using the Windows Configuration
	      Manager via cfgmgr32.dll system library. This method does not re-
	      quire  any special Administrator rights or privileges. Configura-
	      tion Manager provides only basic information about  devices,  as-
	      signed resources and device tree structure. There is no access to
	      the  PCI configuration space but libpci either tries to use other
	      access method to access configuration space or it provides  read-
	      only  virtual  emulation	based on information from Configuration
	      Manager. Other access method can be chosen by the win32.cfgmethod
	      parameter. By default the first working one is selected (if any).
	      Starting with Windows 8 (NT 6.2) it is not possible  to  retrieve
	      resources from 32-bit application or library on 64-bit system.

       win32-sysdbg
	      Access  to the PCI configuration space via NT SysDbg interface on
	      Windows systems. Process needs to have Debug privilege, which lo-
	      cal Administrators have by default. Not available on 64-bit  sys-
	      tems  and neither on recent 32-bit systems. Only devices from the
	      first domain are accessible and only first 256 bytes of  the  PCI
	      configuration space is accessible via this method.

       win32-kldbg
	      Access  to the PCI configuration space via Kernel Local Debugging
	      Driver kldbgdrv.sys. This driver is not part of the Windows  sys-
	      tem  but	is part of the Microsoft WinDbg tool. It is required to
	      have kldbgdrv.sys driver installed in the system32  directory  or
	      to have windbg.exe or kd.exe binary in PATH.  kldbgdrv.sys driver
	      has  some restrictions. Process needs to have Debug privilege and
	      Windows system has to be booted with Debugging option.  Debugging
	      option  can be enabled by calling (takes effect after next boot):
	      bcdedit /debug on

	      Download links for WinDbg 6.12.2.633  standalone	installer  from
	      Microsoft Windows SDK for Windows 7 and .NET Framework 4:
	      amd64:	https://download.microsoft.com/download/A/6/A/A6AC035D-
	      DA3F-4F0C-ADA4-37C8E5D34E3D/setup/WinSDKDebugging-
	      Tools_amd64/dbg_amd64.msi
	      ia64:	https://download.microsoft.com/download/A/6/A/A6AC035D-
	      DA3F-4F0C-ADA4-37C8E5D34E3D/setup/WinSDKDebugging-
	      Tools_ia64/dbg_ia64.msi
	      x86:	https://download.microsoft.com/download/A/6/A/A6AC035D-
	      DA3F-4F0C-ADA4-37C8E5D34E3D/setup/WinSDKDebugging-
	      Tools/dbg_x86.msi

	      Archived download links of previous WinDbg versions:
	      https://web.archive.org/web/20110221133326/https://www.mi-
	      crosoft.com/whdc/devtools/debugging/installx86.mspx
	      https://web.archive.org/web/20110214012715/https://www.mi-
	      crosoft.com/whdc/devtools/debugging/install64bit.mspx

       aos-expansion
	      Access method used on PowerPC Amiga running OS4+. Access is  made
	      through  Expansion.library.  It  offers  read and write access to
	      configuration space.

PARAMETERS
       The library is controlled by several parameters. They should have sensi-
       ble default values, but in case you want to  do	something  unusual  (or
       even  something	weird),	 you  can  override  them (see the -O switch of
       lspci).

   Parameters of specific access methods
       dump.name
	      Name of the bus dump file to read from.

       fbsd.path
	      Path to the FreeBSD PCI device.

       nbsd.path
	      Path to the NetBSD PCI device.

       obsd.path
	      Path to the OpenBSD PCI device.

       proc.path
	      Path to the procfs bus tree.

       sysfs.path
	      Path to the sysfs device tree.

       devmem.path
	      Path to the /dev/mem device.

       mmio-conf1.addrs
	      Physical addresses of memory-mapped I/O ports for Intel  configu-
	      ration  mechanism	 1.   CF8 (address) and CFC (data) I/O port ad-
	      dresses are separated by slash and multiple addresses for differ-
	      ent   PCI	  domains   are	  separated   by    commas.	Format:
	      0xaddr1/0xdata1,0xaddr2/0xdata2,...

       mmio-conf1-ext.addrs
	      Physical	addresses  of memory-mapped I/O ports for Extended PCIe
	      Intel configuration mechanism 1.	It has	same  format  as  mmio-
	      conf1.addrs parameter.

       ecam.addrs
	      Physical	addresses of PCIe ECAM mappings. Each mapping must con-
	      tains first PCI bus number and  physical	address	 where	mapping
	      starts.  And  then  it may contain the length of the mapping, the
	      last PCI bus number and PCI domain number. When the last PCI  bus
	      number  is  not provided then it is calculated from the length of
	      the mapping or it is assumed 0xff. When length of the mapping  is
	      provided	then it is calculated from the last PCI bus number. And
	      when PCI domain is not provided then 0x0 is assumed. All	numbers
	      must  be	supplied  in hexadecimal form (leading prefix 0x is not
	      required). Multiple mappings are separated  by  commas.	Format:
	      [domain:]start_bus[-end_bus]:start_addr[+length],...

       ecam.acpimcfg
	      Path  to	the ACPI MCFG table. Processed by the glob(3) function,
	      so it may contain wildcards (*).

       ecam.efisystab
	      Path to the EFI system table.

       ecam.bsd
	      When not set to 0 then use BSD kenv or sysctl to find  ACPI  MCFG
	      table. Default value is 1 on BSD systems.

       ecam.x86bios
	      When  not set to 0 then scan x86 BIOS memory for ACPI MCFG table.
	      Default value is 1 on x86 systems.

       win32.cfgmethod
	      Config space access method to use with win32-cfgmgr32 on	Windows
	      systems.	Value  auto or an empty string selects the first access
	      method which supports access to  the  config  space  on  Windows.
	      Value win32-cfgmgr32 or none only builds a read-only virtual emu-
	      lated  config  space with information from the Configuration Man-
	      ager.

   Parameters for resolving of ID's via DNS
       net.domain
	      DNS domain containing the ID database.

       net.cache_name
	      Name of the file used for caching of resolved ID's. An initial ~/
	      is expanded to the user's home directory.

   Parameters for resolving of ID's via UDEV's HWDB
       hwdb.disable
	      Disable use of HWDB if set to a non-zero value.

SEE ALSO
       lspci(8), setpci(8), pci.ids(5), update-pciids(8)

AUTHOR
       The PCI Utilities are maintained by Martin Mares <mj@ucw.cz>.

pciutils-3.13.0			  30 May 2024			      pcilib(7)