search..
No manual entry for -- in section 5
TERMINAL-COLORS.D(5)		  File formats		   TERMINAL-COLORS.D(5)

NAME
       terminal-colors.d - configure output colorization for various utilities

SYNOPSIS
       /etc/terminal-colors.d/[[name][@term].][type]

DESCRIPTION
       Files in this directory determine the default behavior for utilities
       when coloring output.

       The name is a utility name. The name is optional and when none is
       specified then the file is used for all unspecified utilities.

       The term is a terminal identifier (the TERM environment variable). The
       terminal identifier is optional and when none is specified then the file
       is used for all unspecified terminals.

       The type is a file type. Supported file types are:

       disable
	   Turns off output colorization for all compatible utilities. See also
	   the NO_COLOR environment variable below.

       enable
	   Turns on output colorization; any matching disable files are
	   ignored.

       scheme
	   Specifies colors used for output. The file format may be specific to
	   the utility, the default format is described below.

       If there are more files that match for a utility, then the file with the
       more specific filename wins. For example, the filename "@xterm.scheme"
       has less priority than "dmesg@xterm.scheme". The lowest priority are
       those files without a utility name and terminal identifier (e.g.,
       "disable").

       The user-specific $XDG_CONFIG_HOME/terminal-colors.d or
       $HOME/.config/terminal-colors.d overrides the global setting.

DEFAULT SCHEME FILES FORMAT
       The following statement is recognized:

	  name color-sequence

       The name is a logical name of color sequence (for example "error"). The
       names are specific to the utilities. For more details always see the
       COLORS section in the man page for the utility.

       The color-sequence is a color name, ASCII color sequences or escape
       sequences.

   Color names
       black, blink, blue, bold, brown, cyan, darkgray, gray, green,
       halfbright, lightblue, lightcyan, lightgray, lightgreen, lightmagenta,
       lightred, magenta, red, reset, reverse, and yellow.

   ANSI color sequences
       The color sequences are composed of sequences of numbers separated by
       semicolons. The most common codes are:
	  +----+--------------------------+
	  |    |			  |
	  | 0  | to restore default color |
	  +----+--------------------------+
	  |    |			  |
	  | 1  | for brighter colors	  |
	  +----+--------------------------+
	  |    |			  |
	  | 4  | for underlined text	  |
	  +----+--------------------------+
	  |    |			  |
	  | 5  | for flashing text	  |
	  +----+--------------------------+
	  |    |			  |
	  | 30 | for black foreground	  |
	  +----+--------------------------+
	  |    |			  |
	  | 31 | for red foreground	  |
	  +----+--------------------------+
	  |    |			  |
	  | 32 | for green foreground	  |
	  +----+--------------------------+
	  |    |			  |
	  | 33 | for yellow (or brown)	  |
	  |    | foreground		  |
	  +----+--------------------------+
	  |    |			  |
	  | 34 | for blue foreground	  |
	  +----+--------------------------+
	  |    |			  |
	  | 35 | for purple foreground	  |
	  +----+--------------------------+
	  |    |			  |
	  | 36 | for cyan foreground	  |
	  +----+--------------------------+
	  |    |			  |
	  | 37 | for white (or gray)	  |
	  |    | foreground		  |
	  +----+--------------------------+
	  |    |			  |
	  | 40 | for black background	  |
	  +----+--------------------------+
	  |    |			  |
	  | 41 | for red background	  |
	  +----+--------------------------+
	  |    |			  |
	  | 42 | for green background	  |
	  +----+--------------------------+
	  |    |			  |
	  | 43 | for yellow (or brown)	  |
	  |    | background		  |
	  +----+--------------------------+
	  |    |			  |
	  | 44 | for blue background	  |
	  +----+--------------------------+
	  |    |			  |
	  | 45 | for purple background	  |
	  +----+--------------------------+
	  |    |			  |
	  | 46 | for cyan background	  |
	  +----+--------------------------+
	  |    |			  |
	  | 47 | for white (or gray)	  |
	  |    | background		  |
	  +----+--------------------------+

   Escape sequences
       To specify control or blank characters in the color sequences,
       C-style \-escaped notation can be used:
	  +----+------------------------+
	  |    |			|
	  | \a | Bell (ASCII 7)		|
	  +----+------------------------+
	  |    |			|
	  | \b | Backspace (ASCII 8)	|
	  +----+------------------------+
	  |    |			|
	  | \e | Escape (ASCII 27)	|
	  +----+------------------------+
	  |    |			|
	  | \f | Form feed (ASCII 12)	|
	  +----+------------------------+
	  |    |			|
	  | \n | Newline (ASCII 10)	|
	  +----+------------------------+
	  |    |			|
	  | \r | Carriage Return (ASCII |
	  |    | 13)			|
	  +----+------------------------+
	  |    |			|
	  | \t | Tab (ASCII 9)		|
	  +----+------------------------+
	  |    |			|
	  | \v | Vertical Tab (ASCII	|
	  |    | 11)			|
	  +----+------------------------+
	  |    |			|
	  | \? | Delete (ASCII 127)	|
	  +----+------------------------+
	  |    |			|
	  | \_ | Space			|
	  +----+------------------------+
	  |    |			|
	  | \\ | Backslash (\)		|
	  +----+------------------------+
	  |    |			|
	  | \^ | Caret (^)		|
	  +----+------------------------+
	  |    |			|
	  | \# | Hash mark (#)		|
	  +----+------------------------+

       Please note that escapes are necessary to enter a space,
       backslash, caret, or any control character anywhere in
       the string, as well as a hash mark as the first
       character.

       For example, to use a red background for alert messages
       in the output of dmesg(1), use:

	  echo 'alert 37;41' >>
	  /etc/terminal-colors.d/dmesg.scheme

   Comments
       Lines where the first non-blank character is a # (hash)
       are ignored. Any other use of the hash character is not
       interpreted as introducing a comment.

ENVIRONMENT
       TERMINAL_COLORS_DEBUG=all
	   enables debug output.

       NO_COLOR
	   if defined, this disables output colorization unless
	   explicitly enabled by a command-line option. See
	   https://no-color.org/ for more details. Supported
	   since util-linux version 2.41.

FILES
       $XDG_CONFIG_HOME/terminal-colors.d

       $HOME/.config/terminal-colors.d

       /etc/terminal-colors.d

EXAMPLE
       Disable colors for all compatible utilities:

	  touch /etc/terminal-colors.d/disable

       Disable colors for all compatible utils on a vt100
       terminal:

	  touch /etc/terminal-colors.d/@vt100.disable

       Disable colors for all compatible utils except dmesg(1):

	  touch /etc/terminal-colors.d/disable

	  touch /etc/terminal-colors.d/dmesg.enable

COMPATIBILITY
       The terminal-colors.d functionality is currently
       supported by all util-linux utilities which provides
       colorized output. For more details always see the COLORS
       section in the man page for the utility.

REPORTING BUGS
       For bug reports, use the issue tracker
       <https://github.com/util-linux/util-linux/issues>.

AVAILABILITY
       terminal-colors.d is part of the util-linux package
       which can be downloaded from Linux Kernel Archive
       <https://www.kernel.org/pub/linux/utils/util-linux/>.

util-linux 2.41.5		   2026-06-16		   TERMINAL-COLORS.D(5)