search..
No manual entry for -- in section 5
SYSTEMD.NETDEV(5)		systemd.network		      SYSTEMD.NETDEV(5)

NAME
       systemd.netdev - Virtual Network Device configuration

SYNOPSIS
       netdev.netdev

DESCRIPTION
       A plain ini-style text file that encodes configuration about a virtual
       network device, used by systemd-networkd(8). See systemd.syntax(7) for a
       general description of the syntax.

       The main Virtual Network Device file must have the extension .netdev;
       other extensions are ignored. Virtual network devices are created as
       soon as systemd-networkd is started if possible. If a netdev with the
       specified name already exists, systemd-networkd will try to update the
       config if the kind of the existing netdev is equivalent to the requested
       one, otherwise (e.g. when bridge device foo exists but bonding device
       with the same name is configured in a .netdev file) use the existing
       netdev as-is rather than replacing with the requested netdev. Note,
       several settings (e.g. vlan ID) cannot be changed after the netdev is
       created. To change such settings, it is necessary to first remove the
       existing netdev, and then run networkctl reload command or restart
       systemd-networkd. See also networkctl(1).

       The .netdev files are read from the files located in the system network
       directory /usr/lib/systemd/network and /usr/local/lib/systemd/network,
       the volatile runtime network directory /run/systemd/network and the
       local administration network directory /etc/systemd/network. All
       configuration files are collectively sorted and processed in
       alphanumeric order, regardless of the directories in which they live.
       However, files with identical filenames replace each other. It is
       recommended that each filename is prefixed with a number smaller than
       "70" (e.g.  10-vlan.netdev). Otherwise, .netdev files generated by
       systemd-network-generator.service(8) may take precedence over user
       configured files. Files in /etc/ have the highest priority, files in
       /run/ take precedence over files with the same name in /usr/lib/. This
       can be used to override a system-supplied configuration file with a
       local file if needed. As a special case, an empty file (file size 0) or
       symlink with the same name pointing to /dev/null disables the
       configuration file entirely (it is "masked").

       Along with the netdev file foo.netdev, a "drop-in" directory
       foo.netdev.d/ may exist. All files with the suffix ".conf" from this
       directory will be merged in the alphanumeric order and parsed after the
       main file itself has been parsed. This is useful to alter or add
       configuration settings, without having to modify the main configuration
       file. Each drop-in file must have appropriate section headers.

       In addition to /etc/systemd/network, drop-in ".d" directories can be
       placed in /usr/lib/systemd/network or /run/systemd/network directories.
       Drop-in files in /etc/ take precedence over those in /run/ which in turn
       take precedence over those in /usr/lib/. Drop-in files under any of
       these directories take precedence over the main netdev file wherever
       located. (Of course, since /run/ is temporary and /usr/lib/ is for
       vendors, it is unlikely drop-ins should be used in either of those
       places.)

SUPPORTED NETDEV KINDS
       The following kinds of virtual network devices may be configured in
       .netdev files:

       Table 1. Supported kinds of virtual network devices
       +-----------+----------------------------+
       | Kind	   | Description		|
       +-----------+----------------------------+
       | bond	   | A bond device is an	|
       |	   | aggregation of all its	|
       |	   | slave devices. See Linux	|
       |	   | Ethernet Bonding Driver	|
       |	   | HOWTO[1] for details.	|
       +-----------+----------------------------+
       | bridge	   | A bridge device is a	|
       |	   | software switch, and each	|
       |	   | of its slave devices and	|
       |	   | the bridge itself are	|
       |	   | ports of the switch.	|
       +-----------+----------------------------+
       | dummy	   | A dummy device drops all	|
       |	   | packets sent to it.	|
       +-----------+----------------------------+
       | gre	   | A Level 3 GRE tunnel over	|
       |	   | IPv4. See RFC 2784[2] for	|
       |	   | details. Name "gre0"	|
       |	   | should not be used, as the |
       |	   | kernel creates a device	|
       |	   | with this name when the	|
       |	   | corresponding kernel	|
       |	   | module is loaded.		|
       +-----------+----------------------------+
       | gretap	   | A Level 2 GRE tunnel over	|
       |	   | IPv4. Name "gretap0"	|
       |	   | should not be used, as the |
       |	   | kernel creates a device	|
       |	   | with this name when the	|
       |	   | corresponding kernel	|
       |	   | module is loaded.		|
       +-----------+----------------------------+
       | erspan	   | ERSPAN mirrors traffic on	|
       |	   | one or more source ports	|
       |	   | and delivers the mirrored	|
       |	   | traffic to one or more	|
       |	   | destination ports on	|
       |	   | another switch. The	|
       |	   | traffic is encapsulated in |
       |	   | generic routing		|
       |	   | encapsulation (GRE) and is |
       |	   | therefore routable across	|
       |	   | a layer 3 network between	|
       |	   | the source switch and the	|
       |	   | destination switch. Name	|
       |	   | "erspan0" should not be	|
       |	   | used, as the kernel	|
       |	   | creates a device with this |
       |	   | name when the		|
       |	   | corresponding kernel	|
       |	   | module is loaded.		|
       +-----------+----------------------------+
       | ip6gre	   | A Level 3 GRE tunnel over	|
       |	   | IPv6.			|
       +-----------+----------------------------+
       | ip6tnl	   | An IPv4 or IPv6 tunnel	|
       |	   | over IPv6			|
       +-----------+----------------------------+
       | ip6gretap | A Level 2 GRE tunnel over	|
       |	   | IPv6.			|
       +-----------+----------------------------+
       | ipip	   | An IPv4 over IPv4 tunnel.	|
       +-----------+----------------------------+
       | ipvlan	   | An IPVLAN device is a	|
       |	   | stacked device which	|
       |	   | receives packets from its	|
       |	   | underlying device based on |
       |	   | IP address filtering.	|
       +-----------+----------------------------+
       | ipvtap	   | An IPVTAP device is a	|
       |	   | stacked device which	|
       |	   | receives packets from its	|
       |	   | underlying device based on |
       |	   | IP address filtering and	|
       |	   | can be accessed using the	|
       |	   | tap user space interface.	|
       +-----------+----------------------------+
       | macvlan   | A macvlan device is a	|
       |	   | stacked device which	|
       |	   | receives packets from its	|
       |	   | underlying device based on |
       |	   | MAC address filtering.	|
       +-----------+----------------------------+
       | macvtap   | A macvtap device is a	|
       |	   | stacked device which	|
       |	   | receives packets from its	|
       |	   | underlying device based on |
       |	   | MAC address filtering.	|
       +-----------+----------------------------+
       | sit	   | An IPv6 over IPv4 tunnel.	|
       +-----------+----------------------------+
       | tap	   | A persistent Level 2	|
       |	   | tunnel between a network	|
       |	   | device and a device node.	|
       +-----------+----------------------------+
       | tun	   | A persistent Level 3	|
       |	   | tunnel between a network	|
       |	   | device and a device node.	|
       +-----------+----------------------------+
       | veth	   | An Ethernet tunnel between |
       |	   | a pair of network devices. |
       +-----------+----------------------------+
       | vlan	   | A VLAN is a stacked device |
       |	   | which receives packets	|
       |	   | from its underlying device |
       |	   | based on VLAN tagging. See |
       |	   | IEEE 802.1Q[3] for		|
       |	   | details.			|
       +-----------+----------------------------+
       | vti	   | An IPv4 over IPSec tunnel. |
       +-----------+----------------------------+
       | vti6	   | An IPv6 over IPSec tunnel. |
       +-----------+----------------------------+
       | vxlan	   | A virtual extensible LAN	|
       |	   | (vxlan), for connecting	|
       |	   | Cloud computing		|
       |	   | deployments.		|
       +-----------+----------------------------+
       | geneve	   | A GEneric NEtwork		|
       |	   | Virtualization		|
       |	   | Encapsulation (GENEVE)	|
       |	   | netdev driver.		|
       +-----------+----------------------------+
       | l2tp	   | A Layer 2 Tunneling	|
       |	   | Protocol (L2TP) is a	|
       |	   | tunneling protocol used to |
       |	   | support virtual private	|
       |	   | networks (VPNs) or as part |
       |	   | of the delivery of		|
       |	   | services by ISPs. It does	|
       |	   | not provide any encryption |
       |	   | or confidentiality by	|
       |	   | itself			|
       +-----------+----------------------------+
       | macsec	   | Media Access Control	|
       |	   | Security (MACsec) is an	|
       |	   | 802.1AE IEEE		|
       |	   | industry-standard security |
       |	   | technology that provides	|
       |	   | secure communication for	|
       |	   | all traffic on Ethernet	|
       |	   | links. MACsec provides	|
       |	   | point-to-point security on |
       |	   | Ethernet links between	|
       |	   | directly connected nodes	|
       |	   | and is capable of		|
       |	   | identifying and preventing |
       |	   | most security threats.	|
       +-----------+----------------------------+
       | vrf	   | A Virtual Routing and	|
       |	   | Forwarding (VRF[4])	|
       |	   | interface to create	|
       |	   | separate routing and	|
       |	   | forwarding domains.	|
       +-----------+----------------------------+
       | vcan	   | The virtual CAN driver	|
       |	   | (vcan). Similar to the	|
       |	   | network loopback devices,	|
       |	   | vcan offers a virtual	|
       |	   | local CAN interface.	|
       +-----------+----------------------------+
       | vxcan	   | The virtual CAN tunnel	|
       |	   | driver (vxcan). Similar to |
       |	   | the virtual ethernet	|
       |	   | driver veth, vxcan		|
       |	   | implements a local CAN	|
       |	   | traffic tunnel between two |
       |	   | virtual CAN network	|
       |	   | devices. When creating a	|
       |	   | vxcan, two vxcan devices	|
       |	   | are created as pair. When	|
       |	   | one end receives the	|
       |	   | packet it appears on its	|
       |	   | pair and vice versa. The	|
       |	   | vxcan can be used for	|
       |	   | cross namespace		|
       |	   | communication.		|
       +-----------+----------------------------+
       | wireguard | WireGuard Secure Network	|
       |	   | Tunnel.			|
       +-----------+----------------------------+
       | nlmon	   | A Netlink monitor device.	|
       |	   | Use an nlmon device when	|
       |	   | you want to monitor system |
       |	   | Netlink messages.		|
       +-----------+----------------------------+
       | fou	   | Foo-over-UDP tunneling.	|
       +-----------+----------------------------+
       | xfrm	   | A virtual tunnel interface |
       |	   | like vti/vti6 but with	|
       |	   | several advantages.	|
       +-----------+----------------------------+
       | ifb	   | The Intermediate		|
       |	   | Functional Block (ifb)	|
       |	   | pseudo network interface	|
       |	   | acts as a QoS concentrator |
       |	   | for multiple different	|
       |	   | sources of traffic.	|
       +-----------+----------------------------+
       | bareudp   | Bare UDP tunnels provide a |
       |	   | generic L3 encapsulation	|
       |	   | support for tunnelling	|
       |	   | different L3 protocols	|
       |	   | like MPLS, IP etc. inside	|
       |	   | of a UDP tunnel.		|
       +-----------+----------------------------+
       | batadv	   | B.A.T.M.A.N. Advanced[5]	|
       |	   | is a routing protocol for	|
       |	   | multi-hop mobile ad-hoc	|
       |	   | networks which operates on |
       |	   | layer 2.			|
       +-----------+----------------------------+
       | ipoib	   | An IP over Infiniband	|
       |	   | subinterface.		|
       +-----------+----------------------------+
       | wlan	   | A virtual wireless network |
       |	   | (WLAN) interface.		|
       +-----------+----------------------------+

[MATCH] SECTION OPTIONS
       A virtual network device is only created if the [Match] section matches
       the current environment, or if the section is empty. The following keys
       are accepted:

       Host=
	   Matches against the hostname or machine ID of the host. See
	   ConditionHost= in systemd.unit(5) for details. When prefixed with an
	   exclamation mark ("!"), the result is negated. If an empty string is
	   assigned, the previously assigned value is cleared.

	   Added in version 211.

       Virtualization=
	   Checks whether the system is executed in a virtualized environment
	   and optionally test whether it is a specific implementation. See
	   ConditionVirtualization= in systemd.unit(5) for details. When
	   prefixed with an exclamation mark ("!"), the result is negated. If
	   an empty string is assigned, the previously assigned value is
	   cleared.

	   Added in version 211.

       KernelCommandLine=
	   Checks whether a specific kernel command line option is set. See
	   ConditionKernelCommandLine= in systemd.unit(5) for details. When
	   prefixed with an exclamation mark ("!"), the result is negated. If
	   an empty string is assigned, the previously assigned value is
	   cleared.

	   Added in version 211.

       KernelVersion=
	   Checks whether the kernel version (as reported by uname -r) matches
	   a certain expression. See ConditionKernelVersion= in systemd.unit(5)
	   for details. When prefixed with an exclamation mark ("!"), the
	   result is negated. If an empty string is assigned, the previously
	   assigned value is cleared.

	   Added in version 237.

       Credential=
	   Checks whether the specified credential was passed to the
	   systemd-udevd.service service. See System and Service Credentials[6]
	   for details. When prefixed with an exclamation mark ("!"), the
	   result is negated. If an empty string is assigned, the previously
	   assigned value is cleared.

	   Added in version 252.

       Architecture=
	   Checks whether the system is running on a specific architecture. See
	   ConditionArchitecture= in systemd.unit(5) for details. When prefixed
	   with an exclamation mark ("!"), the result is negated. If an empty
	   string is assigned, the previously assigned value is cleared.

	   Added in version 211.

       Firmware=
	   Checks whether the system is running on a machine with the specified
	   firmware. See ConditionFirmware= in systemd.unit(5) for details.
	   When prefixed with an exclamation mark ("!"), the result is negated.
	   If an empty string is assigned, the previously assigned value is
	   cleared.

	   Added in version 249.

[NETDEV] SECTION OPTIONS
       The [NetDev] section accepts the following keys:

       Description=
	   A free-form description of the netdev.

	   Added in version 215.

       Name=
	   The interface name used when creating the netdev. This setting is
	   compulsory.

	   Added in version 211.

       Kind=
	   The netdev kind. This setting is compulsory. See the "Supported
	   netdev kinds" section for the valid keys.

	   Added in version 211.

       MTUBytes=
	   The maximum transmission unit in bytes to set for the device. The
	   usual suffixes K, M, G are supported and are understood to the base
	   of 1024. For "tun" or "tap" devices, MTUBytes= setting is not
	   currently supported in [NetDev] section. Please specify it in [Link]
	   section of corresponding systemd.network(5) files.

	   Added in version 215.

       MACAddress=
	   Specifies the MAC address to use for the device, or takes the
	   special value "none". When "none", systemd-networkd does not request
	   the MAC address for the device, and the kernel will assign a random
	   MAC address. For "tun", "tap", or "l2tp" devices, the MACAddress=
	   setting in the [NetDev] section is not supported and will be
	   ignored. Please specify it in the [Link] section of the
	   corresponding systemd.network(5) file. If this option is not set,
	   "vlan" device inherits the MAC address of the master interface. For
	   other kind of netdevs, if this option is not set, then the MAC
	   address is generated based on the interface name and the machine-
	   id(5).

	   Note, even if "none" is specified, systemd-udevd will assign the
	   persistent MAC address for the device, as 99-default.link has
	   MACAddressPolicy=persistent. So, it is also necessary to create a
	   custom .link file for the device, if the MAC address assignment is
	   not desired.

	   Added in version 215.

[BRIDGE] SECTION OPTIONS
       The [Bridge] section only applies for netdevs of kind "bridge", and
       accepts the following keys:

       HelloTimeSec=
	   HelloTimeSec specifies the number of seconds between two hello
	   packets sent out by the root bridge and the designated bridges.
	   Hello packets are used to communicate information about the topology
	   throughout the entire bridged local area network.

	   Added in version 227.

       MaxAgeSec=
	   MaxAgeSec specifies the number of seconds of maximum message age. If
	   the last seen (received) hello packet is more than this number of
	   seconds old, the bridge in question will start the takeover
	   procedure in attempt to become the Root Bridge itself.

	   Added in version 227.

       ForwardDelaySec=
	   ForwardDelaySec specifies the number of seconds spent in each of the
	   Listening and Learning states before the Forwarding state is
	   entered.

	   Added in version 227.

       AgeingTimeSec=
	   This specifies the number of seconds a MAC Address will be kept in
	   the forwarding database after having a packet received from this MAC
	   Address.

	   Added in version 232.

       Priority=
	   The priority of the bridge. An integer between 0 and 65535. A lower
	   value means higher priority. The bridge having the lowest priority
	   will be elected as root bridge.

	   Added in version 232.

       GroupForwardMask=
	   A 16-bit bitmask represented as an integer which allows forwarding
	   of link local frames with 802.1D reserved addresses
	   (01:80:C2:00:00:0X). A logical AND is performed between the
	   specified bitmask and the exponentiation of 2^X, the lower nibble of
	   the last octet of the MAC address. For example, a value of 8 would
	   allow forwarding of frames addressed to 01:80:C2:00:00:03 (802.1X
	   PAE).

	   Added in version 235.

       DefaultPVID=
	   This specifies the default port VLAN ID of a newly attached bridge
	   port. Set this to an integer in the range 1...4094 or "none" to
	   disable the PVID.

	   Added in version 232.

       MulticastQuerier=
	   Takes a boolean. This setting controls the IFLA_BR_MCAST_QUERIER
	   option in the kernel. If enabled, the kernel will send general ICMP
	   queries from a zero source address. This feature should allow faster
	   convergence on startup, but it causes some multicast-aware switches
	   to misbehave and disrupt forwarding of multicast packets. When
	   unset, the kernel's default will be used.

	   Added in version 230.

       MulticastSnooping=
	   Takes a boolean. This setting controls the IFLA_BR_MCAST_SNOOPING
	   option in the kernel. If enabled, IGMP snooping monitors the
	   Internet Group Management Protocol (IGMP) traffic between hosts and
	   multicast routers. When unset, the kernel's default will be used.

	   Added in version 230.

       VLANFiltering=
	   Takes a boolean. This setting controls the IFLA_BR_VLAN_FILTERING
	   option in the kernel. If enabled, the bridge will be started in
	   VLAN-filtering mode. When unset, the kernel's default will be used.

	   Added in version 231.

       VLANProtocol=
	   Allows setting the protocol used for VLAN filtering. Takes 802.1q
	   or, 802.1ad, and defaults to unset and kernel's default is used.

	   Added in version 246.

       STP=
	   Takes a boolean. This enables the bridge's Spanning Tree Protocol
	   (STP). When unset, the kernel's default will be used.

	   Added in version 232.

       MulticastIGMPVersion=
	   Allows changing bridge's multicast Internet Group Management
	   Protocol (IGMP) version. Takes an integer 2 or 3. When unset, the
	   kernel's default will be used.

	   Added in version 243.

       FDBMaxLearned=
	   Specifies the maximum number of learned Ethernet addresses for the
	   bridge. When the limit is reached, no more addresses are learned.
	   When unset, the kernel's default will be used. 0 disables the limit.

	   Added in version 257.

[VLAN] SECTION OPTIONS
       The [VLAN] section only applies for netdevs of kind "vlan", and accepts
       the following key:

       Id=
	   The VLAN ID to use. An integer in the range 0...4094. This setting
	   is compulsory.

	   Added in version 211.

       Protocol=
	   Allows setting the protocol used for the VLAN interface. Takes
	   "802.1q" or, "802.1ad", and defaults to unset and kernel's default
	   is used.

	   Added in version 248.

       GVRP=
	   Takes a boolean. The Generic VLAN Registration Protocol (GVRP) is a
	   protocol that allows automatic learning of VLANs on a network. When
	   unset, the kernel's default will be used.

	   Added in version 234.

       MVRP=
	   Takes a boolean. Multiple VLAN Registration Protocol (MVRP) formerly
	   known as GARP VLAN Registration Protocol (GVRP) is a standards-based
	   Layer 2 network protocol, for automatic configuration of VLAN
	   information on switches. It was defined in the 802.1ak amendment to
	   802.1Q-2005. When unset, the kernel's default will be used.

	   Added in version 234.

       LooseBinding=
	   Takes a boolean. The VLAN loose binding mode, in which only the
	   operational state is passed from the parent to the associated VLANs,
	   but the VLAN device state is not changed. When unset, the kernel's
	   default will be used.

	   Added in version 234.

       ReorderHeader=
	   Takes a boolean. When enabled, the VLAN reorder header is used and
	   VLAN interfaces behave like physical interfaces. When unset, the
	   kernel's default will be used.

	   Added in version 234.

       EgressQOSMaps=, IngressQOSMaps=
	   Defines a mapping of Linux internal packet priority (SO_PRIORITY) to
	   VLAN header PCP field for outgoing and incoming frames,
	   respectively. Takes a whitespace-separated list of integer pairs,
	   where each integer must be in the range 1...4294967294, in the
	   format "from"-"to", e.g., "21-7 45-5". Note that "from" must be
	   greater than or equal to "to". When unset, the kernel's default will
	   be used.

	   Added in version 248.

[MACVLAN] SECTION OPTIONS
       The [MACVLAN] section only applies for netdevs of kind "macvlan", and
       accepts the following key:

       Mode=
	   The MACVLAN mode to use. The supported options are "private",
	   "vepa", "bridge", "passthru", and "source".

	   Added in version 211.

       SourceMACAddress=
	   A whitespace-separated list of remote hardware addresses allowed on
	   the MACVLAN. This option only has an effect in source mode. Use full
	   colon-, hyphen- or dot-delimited hexadecimal. This option may appear
	   more than once, in which case the lists are merged. If the empty
	   string is assigned to this option, the list of hardware addresses
	   defined prior to this is reset. Defaults to unset.

	   Added in version 246.

       BroadcastMulticastQueueLength=
	   Specifies the length of the receive queue for broadcast/multicast
	   packets. An unsigned integer in the range 0...4294967294. Defaults
	   to unset.

	   Added in version 248.

       BroadcastQueueThreshold=
	   Controls the threshold for broadcast queueing of the macvlan device.
	   Takes the special value "no", or an integer in the range
	   0...2147483647. When "no" is specified, the broadcast queueing is
	   disabled altogether. When an integer is specified, a multicast
	   address will be queued as broadcast if the number of devices using
	   the macvlan is greater than the given value. Defaults to unset, and
	   the kernel default will be used.

	   Added in version 256.

[MACVTAP] SECTION OPTIONS
       The [MACVTAP] section applies for netdevs of kind "macvtap" and accepts
       the same keys as [MACVLAN].

[IPVLAN] SECTION OPTIONS
       The [IPVLAN] section only applies for netdevs of kind "ipvlan", and
       accepts the following key:

       Mode=
	   The IPVLAN mode to use. The supported options are "L2","L3" and
	   "L3S".

	   Added in version 219.

       Flags=
	   The IPVLAN flags to use. The supported options are
	   "bridge","private" and "vepa".

	   Added in version 237.

[IPVTAP] SECTION OPTIONS
       The [IPVTAP] section only applies for netdevs of kind "ipvtap" and
       accepts the same keys as [IPVLAN].

[VXLAN] SECTION OPTIONS
       The [VXLAN] section only applies for netdevs of kind "vxlan", and
       accepts the following keys:

       VNI=
	   The VXLAN Network Identifier (or VXLAN Segment ID). Takes a number
	   in the range 1...16777215.

	   Added in version 243.

       Remote=
	   Configures destination IP address.

	   Added in version 233.

       Local=
	   Configures local IP address. It must be an address on the underlying
	   interface of the VXLAN interface, or one of the special values
	   "ipv4_link_local", "ipv6_link_local", "dhcp4", "dhcp6", and "slaac".
	   If one of the special values is specified, an address which matches
	   the corresponding type on the underlying interface will be used.
	   Defaults to unset.

	   Added in version 233.

       Group=
	   Configures VXLAN multicast group IP address. All members of a VXLAN
	   must use the same multicast group address.

	   Added in version 243.

       TOS=
	   The Type Of Service byte value for a vxlan interface.

	   Added in version 215.

       TTL=
	   A fixed Time To Live N on Virtual eXtensible Local Area Network
	   packets. Takes "inherit" or a number in the range 0...255. 0 is a
	   special value meaning inherit the inner protocol's TTL value.
	   "inherit" means that it will inherit the outer protocol's TTL value.

	   Added in version 215.

       MacLearning=
	   Takes a boolean. When true, enables dynamic MAC learning to discover
	   remote MAC addresses.

	   Added in version 215.

       FDBAgeingSec=
	   The lifetime of Forwarding Database entry learnt by the kernel, in
	   seconds.

	   Added in version 218.

       MaximumFDBEntries=
	   Configures maximum number of FDB entries.

	   Added in version 228.

       ReduceARPProxy=
	   Takes a boolean. When true, bridge-connected VXLAN tunnel endpoint
	   answers ARP requests from the local bridge on behalf of remote
	   Distributed Overlay Virtual Ethernet (DOVE)[7] clients. Defaults to
	   false.

	   Added in version 233.

       L2MissNotification=
	   Takes a boolean. When true, enables netlink LLADDR miss
	   notifications.

	   Added in version 218.

       L3MissNotification=
	   Takes a boolean. When true, enables netlink IP address miss
	   notifications.

	   Added in version 218.

       RouteShortCircuit=
	   Takes a boolean. When true, route short circuiting is turned on.

	   Added in version 218.

       UDPChecksum=
	   Takes a boolean. When true, transmitting UDP checksums when doing
	   VXLAN/IPv4 is turned on.

	   Added in version 220.

       UDP6ZeroChecksumTx=
	   Takes a boolean. When true, sending zero checksums in VXLAN/IPv6 is
	   turned on.

	   Added in version 220.

       UDP6ZeroChecksumRx=
	   Takes a boolean. When true, receiving zero checksums in VXLAN/IPv6
	   is turned on.

	   Added in version 220.

       RemoteChecksumTx=
	   Takes a boolean. When true, remote transmit checksum offload of
	   VXLAN is turned on.

	   Added in version 232.

       RemoteChecksumRx=
	   Takes a boolean. When true, remote receive checksum offload in VXLAN
	   is turned on.

	   Added in version 232.

       GroupPolicyExtension=
	   Takes a boolean. When true, it enables Group Policy VXLAN extension
	   security label mechanism across network peers based on VXLAN. For
	   details about the Group Policy VXLAN, see the VXLAN Group Policy[8]
	   document. Defaults to false.

	   Added in version 224.

       GenericProtocolExtension=
	   Takes a boolean. When true, Generic Protocol Extension extends the
	   existing VXLAN protocol to provide protocol typing, OAM, and
	   versioning capabilities. For details about the VXLAN GPE Header, see
	   the Generic Protocol Extension for VXLAN[9] document. If destination
	   port is not specified and Generic Protocol Extension is set, the
	   default port of 4790 is used. Defaults to false.

	   Added in version 243.

       DestinationPort=
	   Configures the default destination UDP port. If the destination port
	   is not specified, the Linux kernel default will be used. Set to 4789
	   to get the IANA assigned value.

	   Added in version 229.

       PortRange=
	   Configures the source port range for the VXLAN. The kernel assigns
	   the source UDP port based on the flow to help the receiver to do
	   load balancing. When this option is not set, the normal range of
	   local UDP ports is used.

	   Added in version 229.

       FlowLabel=
	   Specifies the flow label to use in outgoing packets. The valid range
	   is 0-1048575.

	   Added in version 234.

       IPDoNotFragment=
	   Allows setting the IPv4 Do not Fragment (DF) bit in outgoing
	   packets, or to inherit its value from the IPv4 inner header. Takes a
	   boolean value, or "inherit". Set to "inherit" if the encapsulated
	   protocol is IPv6. When unset, the kernel's default will be used.

	   Added in version 243.

       Independent=
	   Takes a boolean. When true, the vxlan interface is created without
	   any underlying network interface. Defaults to false, which means
	   that a .network file that requests this VXLAN interface using VXLAN=
	   is required for the VXLAN to be created.

	   Added in version 247.

[GENEVE] SECTION OPTIONS
       The [GENEVE] section only applies for netdevs of kind "geneve", and
       accepts the following keys:

       Id=
	   Specifies the Virtual Network Identifier (VNI) to use, a number
	   between 0 and 16777215. This field is mandatory.

	   Added in version 234.

       Remote=
	   Specifies the unicast destination IP address to use in outgoing
	   packets.

	   Added in version 234.

       TOS=
	   Specifies the TOS value to use in outgoing packets. Takes a number
	   between 1 and 255.

	   Added in version 234.

       TTL=
	   Accepts the same values as in the [VXLAN] section, except that when
	   unset or set to 0, the kernel's default will be used, meaning that
	   packet TTL will be set from /proc/sys/net/ipv4/ip_default_ttl.

	   Added in version 234.

       UDPChecksum=
	   Takes a boolean. When true, specifies that UDP checksum is
	   calculated for transmitted packets over IPv4.

	   Added in version 234.

       UDP6ZeroChecksumTx=
	   Takes a boolean. When true, skip UDP checksum calculation for
	   transmitted packets over IPv6.

	   Added in version 234.

       UDP6ZeroChecksumRx=
	   Takes a boolean. When true, allows incoming UDP packets over IPv6
	   with zero checksum field.

	   Added in version 234.

       DestinationPort=
	   Specifies destination port. Defaults to 6081. If not set or assigned
	   the empty string, the default port of 6081 is used.

	   Added in version 234.

       FlowLabel=
	   Specifies the flow label to use in outgoing packets.

	   Added in version 234.

       IPDoNotFragment=
	   Accepts the same key as in [VXLAN] section.

	   Added in version 243.

       InheritInnerProtocol=
	   Takes a boolean. When true, inner Layer 3 protocol is set as
	   Protocol Type in the GENEVE header instead of Ethernet. Defaults to
	   false.

	   Added in version 254.

[BAREUDP] SECTION OPTIONS
       The [BareUDP] section only applies for netdevs of kind "bareudp", and
       accepts the following keys:

       DestinationPort=
	   Specifies the destination UDP port (in range 1...65535). This is
	   mandatory.

	   Added in version 247.

       EtherType=
	   Specifies the L3 protocol. Takes one of "ipv4", "ipv6", "mpls-uc" or
	   "mpls-mc". This is mandatory.

	   Added in version 247.

       MinSourcePort=
	   Specifies the lowest value of the UDP tunnel source port (in range
	   1...65535). Defaults to unset.

	   Added in version 257.

[L2TP] SECTION OPTIONS
       The [L2TP] section only applies for netdevs of kind "l2tp", and accepts
       the following keys:

       TunnelId=
	   Specifies the tunnel identifier. Takes an number in the range
	   1...4294967295. The value used must match the "PeerTunnelId=" value
	   being used at the peer. This setting is compulsory.

	   Added in version 242.

       PeerTunnelId=
	   Specifies the peer tunnel id. Takes a number in the range
	   1...4294967295. The value used must match the "TunnelId=" value
	   being used at the peer. This setting is compulsory.

	   Added in version 242.

       Remote=
	   Specifies the IP address of the remote peer. This setting is
	   compulsory.

	   Added in version 242.

       Local=
	   Specifies the IP address of a local interface. Takes an IP address,
	   or the special values "auto", "static", or "dynamic". Optionally a
	   name of a local interface can be specified after "@", e.g.
	   "192.168.0.1@eth0" or "auto@eth0". When an address is specified,
	   then a local or specified interface must have the address, and the
	   remote address must be accessible through the local address. If
	   "auto", then one of the addresses on a local or specified interface
	   which is accessible to the remote address will be used. Similarly,
	   if "static" or "dynamic" is set, then one of the static or dynamic
	   addresses will be used. Defaults to "auto".

	   Added in version 242.

       EncapsulationType=
	   Specifies the encapsulation type of the tunnel. Takes one of "udp"
	   or "ip".

	   Added in version 242.

       UDPSourcePort=
	   Specifies the UDP source port to be used for the tunnel. When UDP
	   encapsulation is selected it is mandatory. Ignored when IP
	   encapsulation is selected.

	   Added in version 242.

       UDPDestinationPort=
	   Specifies destination port. When UDP encapsulation is selected it is
	   mandatory. Ignored when IP encapsulation is selected.

	   Added in version 245.

       UDPChecksum=
	   Takes a boolean. When true, specifies that UDP checksum is
	   calculated for transmitted packets over IPv4.

	   Added in version 242.

       UDP6ZeroChecksumTx=
	   Takes a boolean. When true, skip UDP checksum calculation for
	   transmitted packets over IPv6.

	   Added in version 242.

       UDP6ZeroChecksumRx=
	   Takes a boolean. When true, allows incoming UDP packets over IPv6
	   with zero checksum field.

	   Added in version 242.

[L2TPSESSION] SECTION OPTIONS
       The [L2TPSession] section only applies for netdevs of kind "l2tp", and
       accepts the following keys:

       Name=
	   Specifies the name of the session. This setting is compulsory.

	   Added in version 242.

       SessionId=
	   Specifies the session identifier. Takes an number in the range
	   1...4294967295. The value used must match the "SessionId=" value
	   being used at the peer. This setting is compulsory.

	   Added in version 242.

       PeerSessionId=
	   Specifies the peer session identifier. Takes an number in the range
	   1...4294967295. The value used must match the "PeerSessionId=" value
	   being used at the peer. This setting is compulsory.

	   Added in version 242.

       Layer2SpecificHeader=
	   Specifies layer2specific header type of the session. One of "none"
	   or "default". Defaults to "default".

	   Added in version 242.

[MACSEC] SECTION OPTIONS
       The [MACsec] section only applies for network devices of kind "macsec",
       and accepts the following keys:

       Port=
	   Specifies the port to be used for the MACsec transmit channel. The
	   port is used to make secure channel identifier (SCI). Takes a value
	   between 1 and 65535. Defaults to unset.

	   Added in version 243.

       Encrypt=
	   Takes a boolean. When true, enable encryption. Defaults to unset.

	   Added in version 243.

[MACSECRECEIVECHANNEL] SECTION OPTIONS
       The [MACsecReceiveChannel] section only applies for network devices of
       kind "macsec", and accepts the following keys:

       Port=
	   Specifies the port to be used for the MACsec receive channel. The
	   port is used to make secure channel identifier (SCI). Takes a value
	   between 1 and 65535. This option is compulsory, and is not set by
	   default.

	   Added in version 243.

       MACAddress=
	   Specifies the MAC address to be used for the MACsec receive channel.
	   The MAC address used to make secure channel identifier (SCI). This
	   setting is compulsory, and is not set by default.

	   Added in version 243.

[MACSECTRANSMITASSOCIATION] SECTION OPTIONS
       The [MACsecTransmitAssociation] section only applies for network devices
       of kind "macsec", and accepts the following keys:

       PacketNumber=
	   Specifies the packet number to be used for replay protection and the
	   construction of the initialization vector (along with the secure
	   channel identifier [SCI]). Takes a value between 1-4,294,967,295.
	   Defaults to unset.

	   Added in version 243.

       KeyId=
	   Specifies the identification for the key. Takes a number between
	   0-255. This option is compulsory, and is not set by default.

	   Added in version 243.

       Key=
	   Specifies the encryption key used in the transmission channel. The
	   same key must be configured on the peer's matching receive channel.
	   This setting is compulsory, and is not set by default. Takes a
	   128-bit key encoded in a hexadecimal string, for example
	   "dffafc8d7b9a43d5b9a3dfbbf6a30c16".

	   Added in version 243.

       KeyFile=
	   Takes an absolute path to a file which contains a 128-bit key
	   encoded in a hexadecimal string, which will be used in the
	   transmission channel. When this option is specified, Key= is
	   ignored. Note that the file must be readable by the user
	   "systemd-network", so it should be, e.g., owned by
	   "root:systemd-network" with a "0640" file mode. If the path refers
	   to an AF_UNIX stream socket in the file system a connection is made
	   to it and the key read from it.

	   Added in version 243.

       Activate=
	   Takes a boolean. If enabled, then the security association is
	   activated. Defaults to unset.

	   Added in version 243.

       UseForEncoding=
	   Takes a boolean. If enabled, then the security association is used
	   for encoding. Only one [MACsecTransmitAssociation] section can
	   enable this option. When enabled, Activate=yes is implied. Defaults
	   to unset.

	   Added in version 243.

[MACSECRECEIVEASSOCIATION] SECTION OPTIONS
       The [MACsecReceiveAssociation] section only applies for network devices
       of kind "macsec", and accepts the following keys:

       Port=
	   Accepts the same key as in [MACsecReceiveChannel] section.

	   Added in version 243.

       MACAddress=
	   Accepts the same key as in [MACsecReceiveChannel] section.

	   Added in version 243.

       PacketNumber=
	   Accepts the same key as in [MACsecTransmitAssociation] section.

	   Added in version 243.

       KeyId=
	   Accepts the same key as in [MACsecTransmitAssociation] section.

	   Added in version 243.

       Key=
	   Accepts the same key as in [MACsecTransmitAssociation] section.

	   Added in version 243.

       KeyFile=
	   Accepts the same key as in [MACsecTransmitAssociation] section.

	   Added in version 243.

       Activate=
	   Accepts the same key as in [MACsecTransmitAssociation] section.

	   Added in version 243.

[TUNNEL] SECTION OPTIONS
       The [Tunnel] section only applies for netdevs of kind "ipip", "sit",
       "gre", "gretap", "ip6gre", "ip6gretap", "vti", "vti6", "ip6tnl", and
       "erspan" and accepts the following keys:

       External=
	   Takes a boolean value. When true, then the tunnel is externally
	   controlled, which is also known as collect metadata mode, and most
	   settings below like Local= or Remote= are ignored. This implies
	   Independent=. Defaults to false.

	   Added in version 251.

       Local=
	   A static local address for tunneled packets. It must be an address
	   on another interface of this host, or one of the special values
	   "any", "ipv4_link_local", "ipv6_link_local", "dhcp4", "dhcp6", and
	   "slaac". If one of the special values except for "any" is specified,
	   an address which matches the corresponding type on the underlying
	   interface will be used. Defaults to "any".

	   Added in version 215.

       Remote=
	   The remote endpoint of the tunnel. Takes an IP address or the
	   special value "any".

	   Added in version 215.

       TOS=
	   The Type Of Service byte value for a tunnel interface. For details
	   about the TOS, see the Type of Service in the Internet Protocol
	   Suite[10] document.

	   Added in version 215.

       TTL=
	   A fixed Time To Live N on tunneled packets. N is a number in the
	   range 1...255. 0 is a special value meaning that packets inherit the
	   TTL value. The default value for IPv4 tunnels is 0 (inherit). The
	   default value for IPv6 tunnels is 64.

	   Added in version 215.

       DiscoverPathMTU=
	   Takes a boolean. When true, enables Path MTU Discovery on the
	   tunnel. When IgnoreDontFragment= is enabled, defaults to false.
	   Otherwise, defaults to true.

	   Added in version 215.

       IgnoreDontFragment=
	   Takes a boolean. When true, enables IPv4 Don't Fragment (DF)
	   suppression on the tunnel. Defaults to false. Note that if
	   IgnoreDontFragment= is set to true, DiscoverPathMTU= cannot be set
	   to true. Only applicable to GRE, GRETAP, and ERSPAN tunnels.

	   Added in version 254.

       IPv6FlowLabel=
	   Configures the 20-bit flow label (see RFC 6437[11]) field in the
	   IPv6 header (see RFC 2460[12]), which is used by a node to label
	   packets of a flow. It is only used for IPv6 tunnels. A flow label of
	   zero is used to indicate packets that have not been labeled. It can
	   be configured to a value in the range 0...0xFFFFF, or be set to
	   "inherit", in which case the original flowlabel is used.

	   Added in version 223.

       CopyDSCP=
	   Takes a boolean. When true, the Differentiated Service Code Point
	   (DSCP) field will be copied to the inner header from outer header
	   during the decapsulation of an IPv6 tunnel packet. DSCP is a field
	   in an IP packet that enables different levels of service to be
	   assigned to network traffic. Defaults to "no".

	   Added in version 223.

       EncapsulationLimit=
	   The Tunnel Encapsulation Limit option specifies how many additional
	   levels of encapsulation are permitted to be prepended to the packet.
	   For example, a Tunnel Encapsulation Limit option containing a limit
	   value of zero means that a packet carrying that option may not enter
	   another tunnel before exiting the current tunnel. (see RFC
	   2473[13]). The valid range is 0...255 and "none". Defaults to 4.

	   Added in version 226.

       Key=
	   The Key= parameter specifies the same key to use in both directions
	   (InputKey= and OutputKey=). The Key= is either a number or an IPv4
	   address-like dotted quad. It is used as mark-configured SAD/SPD
	   entry as part of the lookup key (both in data and control path) in
	   IP XFRM (framework used to implement IPsec protocol). See ip-xfrm --
	   transform configuration[14] for details. It is only used for
	   VTI/VTI6, GRE, GRETAP, and ERSPAN tunnels.

	   Added in version 231.

       InputKey=
	   The InputKey= parameter specifies the key to use for input. The
	   format is same as Key=. It is only used for VTI/VTI6, GRE, GRETAP,
	   and ERSPAN tunnels.

	   Added in version 231.

       OutputKey=
	   The OutputKey= parameter specifies the key to use for output. The
	   format is same as Key=. It is only used for VTI/VTI6, GRE, GRETAP,
	   and ERSPAN tunnels.

	   Added in version 231.

       Mode=
	   An "ip6tnl" tunnel can be in one of three modes "ip6ip6" for IPv6
	   over IPv6, "ipip6" for IPv4 over IPv6 or "any" for either.

	   Added in version 219.

       Independent=
	   Takes a boolean. When false (the default), the tunnel is always
	   created over some network device, and a .network file that requests
	   this tunnel using Tunnel= is required for the tunnel to be created.
	   When true, the tunnel is created independently of any network as
	   "tunnel@NONE".

	   Added in version 235.

       AssignToLoopback=
	   Takes a boolean. If set to "yes", the loopback interface "lo" is
	   used as the underlying device of the tunnel interface. Defaults to
	   "no".

	   Added in version 243.

       AllowLocalRemote=
	   Takes a boolean. When true allows tunnel traffic on ip6tnl devices
	   where the remote endpoint is a local host address. When unset, the
	   kernel's default will be used.

	   Added in version 237.

       FooOverUDP=
	   Takes a boolean. Specifies whether FooOverUDP= tunnel is to be
	   configured. Defaults to false. This takes effects only for IPIP,
	   SIT, GRE, and GRETAP tunnels. For more detail information see Foo
	   over UDP[15]

	   Added in version 240.

       FOUDestinationPort=
	   This setting specifies the UDP destination port for encapsulation.
	   This field is mandatory when FooOverUDP=yes, and is not set by
	   default.

	   Added in version 240.

       FOUSourcePort=
	   This setting specifies the UDP source port for encapsulation.
	   Defaults to 0 -- that is, the source port for packets is left to the
	   network stack to decide.

	   Added in version 240.

       Encapsulation=
	   Accepts the same key as in the [FooOverUDP] section.

	   Added in version 240.

       IPv6RapidDeploymentPrefix=
	   Reconfigure the tunnel for IPv6 Rapid Deployment[16], also known as
	   6rd. The value is an ISP-specific IPv6 prefix with a non-zero
	   length. Only applicable to SIT tunnels.

	   Added in version 240.

       ISATAP=
	   Takes a boolean. If set, configures the tunnel as Intra-Site
	   Automatic Tunnel Addressing Protocol (ISATAP) tunnel. Only
	   applicable to SIT tunnels. When unset, the kernel's default will be
	   used.

	   Added in version 240.

       SerializeTunneledPackets=
	   Takes a boolean. If set to yes, then packets are serialized. Only
	   applies for GRE, GRETAP, and ERSPAN tunnels. When unset, the
	   kernel's default will be used.

	   Added in version 240.

       ERSPANVersion=
	   Specifies the ERSPAN version number. Takes 0 for version 0 (a.k.a.
	   type I), 1 for version 1 (a.k.a. type II), or 2 for version 2
	   (a.k.a. type III). Defaults to 1.

	   Added in version 252.

       ERSPANIndex=
	   Specifies the ERSPAN v1 index field for the interface. Takes an
	   integer in the range 0...1048575, which is associated with the
	   ERSPAN traffic's source port and direction. Only used when
	   ERSPANVersion=1. Defaults to 0.

	   Added in version 240.

       ERSPANDirection=
	   Specifies the ERSPAN v2 mirrored traffic's direction. Takes
	   "ingress" or "egress". Only used when ERSPANVersion=2. Defaults to
	   "ingress".

	   Added in version 252.

       ERSPANHardwareId=
	   Specifies an unique identifier of the ERSPAN v2 engine. Takes an
	   integer in the range 0...63. Only used when ERSPANVersion=2.
	   Defaults to 0.

	   Added in version 252.

[FOOOVERUDP] SECTION OPTIONS
       The [FooOverUDP] section only applies for netdevs of kind "fou" and
       accepts the following keys:

       Encapsulation=
	   Specifies the encapsulation mechanism used to store networking
	   packets of various protocols inside the UDP packets. Supports the
	   following values: "FooOverUDP" provides the simplest no-frills model
	   of UDP encapsulation, it simply encapsulates packets directly in the
	   UDP payload.	 "GenericUDPEncapsulation" is a generic and extensible
	   encapsulation, it allows encapsulation of packets for any IP
	   protocol and optional data as part of the encapsulation. For more
	   detailed information see Generic UDP Encapsulation[17]. Defaults to
	   "FooOverUDP".

	   Added in version 240.

       Port=
	   Specifies the port number where the encapsulated packets will
	   arrive. Those packets will be removed and manually fed back into the
	   network stack with the encapsulation removed to be sent to the real
	   destination. This option is mandatory.

	   Added in version 240.

       PeerPort=
	   Specifies the peer port number. Defaults to unset. Note that when
	   peer port is set "Peer=" address is mandatory.

	   Added in version 243.

       Protocol=
	   The Protocol= specifies the protocol number of the packets arriving
	   at the UDP port. When Encapsulation=FooOverUDP, this field is
	   mandatory and is not set by default. Takes an IP protocol name such
	   as "gre" or "ipip", or an integer within the range 1...255. When
	   Encapsulation=GenericUDPEncapsulation, this must not be specified.

	   Added in version 240.

       Peer=
	   Configures peer IP address. Note that when peer address is set
	   "PeerPort=" is mandatory.

	   Added in version 243.

       Local=
	   Configures local IP address.

	   Added in version 243.

[PEER] SECTION OPTIONS
       The [Peer] section only applies for netdevs of kind "veth" and accepts
       the following keys:

       Name=
	   The interface name used when creating the netdev. This setting is
	   compulsory.

	   Added in version 215.

       MACAddress=
	   The peer MACAddress, if not set, it is generated in the same way as
	   the MAC address of the main interface.

	   Added in version 215.

[VXCAN] SECTION OPTIONS
       The [VXCAN] section only applies for netdevs of kind "vxcan" and accepts
       the following key:

       Peer=
	   The peer interface name used when creating the netdev. This setting
	   is compulsory.

	   Added in version 236.

[TUN] SECTION OPTIONS
       The [Tun] section only applies for netdevs of kind "tun", and accepts
       the following keys:

       MultiQueue=
	   Takes a boolean. Configures whether to use multiple file descriptors
	   (queues) to parallelize packets sending and receiving. Defaults to
	   "no".

	   Added in version 215.

       PacketInfo=
	   Takes a boolean. Configures whether packets should be prepended with
	   four extra bytes (two flag bytes and two protocol bytes). If
	   disabled, it indicates that the packets will be pure IP packets.
	   Defaults to "no".

	   Added in version 215.

       VNetHeader=
	   Takes a boolean. Configures IFF_VNET_HDR flag for a tun or tap
	   device. It allows sending and receiving larger Generic Segmentation
	   Offload (GSO) packets. This may increase throughput significantly.
	   Defaults to "no".

	   Added in version 223.

       User=
	   User to grant access to the /dev/net/tun device.

	   Added in version 215.

       Group=
	   Group to grant access to the /dev/net/tun device.

	   Added in version 215.

       KeepCarrier=
	   Takes a boolean. If enabled, to make the interface maintain its
	   carrier status, the file descriptor of the interface is kept open.
	   This may be useful to keep the interface in running state, for
	   example while the backing process is temporarily shutdown. Defaults
	   to "no".

	   Added in version 252.

[TAP] SECTION OPTIONS
       The [Tap] section only applies for netdevs of kind "tap", and accepts
       the same keys as the [Tun] section.

[WIREGUARD] SECTION OPTIONS
       The [WireGuard] section accepts the following keys:

       PrivateKey=
	   The Base64 encoded private key for the interface. It can be
	   generated using the wg genkey command (see wg(8)). Specially, if the
	   specified key is prefixed with "@", it is interpreted as the name of
	   the credential from which the actual key shall be read.  systemd-
	   networkd.service(8) automatically imports credentials matching
	   "network.wireguard.*". For more details on credentials, refer to
	   systemd.exec(5). A private key is mandatory to use WireGuard. If not
	   set, the credential "network.wireguard.private.netdev" is used if
	   exists. I.e. for 50-foobar.netdev,
	   "network.wireguard.private.50-foobar" is tried.

	   Note that because this information is secret, it is strongly
	   recommended to use an (encrypted) credential. Alternatively, you may
	   want to set the permissions of the .netdev file to be owned by
	   "root:systemd-network" with a "0640" file mode.

	   Added in version 237.

       PrivateKeyFile=
	   Takes an absolute path to a file which contains the Base64 encoded
	   private key for the interface. When this option is specified, then
	   PrivateKey= is ignored. Note that the file must be readable by the
	   user "systemd-network", so it should be, e.g., owned by
	   "root:systemd-network" with a "0640" file mode. If the path refers
	   to an AF_UNIX stream socket in the file system a connection is made
	   to it and the key read from it.

	   Added in version 242.

       ListenPort=
	   Sets UDP port for listening. Takes either value between 1 and 65535
	   or "auto". If "auto" is specified, the port is automatically
	   generated based on interface name. Defaults to "auto".

	   Added in version 237.

       FirewallMark=
	   Sets a firewall mark on outgoing WireGuard packets from this
	   interface. Takes a number between 1 and 4294967295.

	   Added in version 243.

       RouteTable=
	   The table identifier for the routes to the addresses specified in
	   the AllowedIPs=. Takes a negative boolean value, one of the
	   predefined names "default", "main", and "local", names defined in
	   RouteTable= in networkd.conf(5), or a number in the range
	   1...4294967295. When "off" the routes to the addresses specified in
	   the AllowedIPs= setting will not be configured. Defaults to false.
	   This setting will be ignored when the same setting is specified in
	   the [WireGuardPeer] section.

	   Added in version 250.

       RouteMetric=
	   The priority of the routes to the addresses specified in the
	   AllowedIPs=. Takes an integer in the range 0...4294967295. Defaults
	   to 0 for IPv4 addresses, and 1024 for IPv6 addresses. This setting
	   will be ignored when the same setting is specified in the
	   [WireGuardPeer] section.

	   Added in version 250.

[WIREGUARDPEER] SECTION OPTIONS
       The [WireGuardPeer] section accepts the following keys:

       PublicKey=
	   Sets a Base64 encoded public key calculated by wg pubkey (see wg(8))
	   from a private key, and usually transmitted out of band to the
	   author of the configuration file. This option honors the "@" prefix
	   in the same way as the PrivateKey= setting of the [WireGuard]
	   section. This option is mandatory for this section.

	   Added in version 237.

       PublicKeyFile=
	   Takes an absolute path to a file which contains the Base64 encoded
	   public key for the peer. When this option is specified, then
	   PublicKey= will be ignored. Note that the file must be readable by
	   the user "systemd-network", so it should be, e.g., owned by
	   "root:systemd-network" with a "0640" file mode. If the path refers
	   to an AF_UNIX stream socket in the file system a connection is made
	   to it and the key read from it.

	   Added in version 257.

       PresharedKey=
	   Optional preshared key for the interface. It can be generated by the
	   wg genpsk command. This option adds an additional layer of
	   symmetric-key cryptography to be mixed into the already existing
	   public-key cryptography, for post-quantum resistance. This option
	   honors the "@" prefix in the same way as the PrivateKey= setting of
	   the [WireGuard] section.

	   Note that because this information is secret, it is strongly
	   recommended to use an (encrypted) credential. Alternatively, you may
	   want to set the permissions of the .netdev file to be owned by
	   "root:systemd-network" with a "0640" file mode.

	   Added in version 237.

       PresharedKeyFile=
	   Takes an absolute path to a file which contains the Base64 encoded
	   preshared key for the peer. When this option is specified, then
	   PresharedKey= is ignored. Note that the file must be readable by the
	   user "systemd-network", so it should be, e.g., owned by
	   "root:systemd-network" with a "0640" file mode. If the path refers
	   to an AF_UNIX stream socket in the file system a connection is made
	   to it and the key read from it.

	   Added in version 242.

       AllowedIPs=
	   Sets a comma-separated list of IP (v4 or v6) addresses with CIDR
	   masks from which this peer is allowed to send incoming traffic and
	   to which outgoing traffic for this peer is directed. This setting
	   can be specified multiple times. If an empty string is assigned,
	   then the all previous assignments are cleared.

	   The catch-all 0.0.0.0/0 may be specified for matching all IPv4
	   addresses, and ::/0 may be specified for matching all IPv6
	   addresses.

	   Note that this only affects routing inside the network interface
	   itself, i.e. the packets that pass through the tunnel itself. To
	   cause packets to be sent via the tunnel in the first place, an
	   appropriate route needs to be added as well -- either in the
	   "[Routes]" section on the ".network" matching the wireguard
	   interface, or externally to systemd-networkd.

	   Added in version 237.

       Endpoint=
	   Sets an endpoint IP address or hostname, followed by a colon, and
	   then a port number. IPv6 address must be in the square brackets. For
	   example, "111.222.333.444:51820" for IPv4 and
	   "[1111:2222::3333]:51820" for IPv6 address. This endpoint will be
	   updated automatically once to the most recent source IP address and
	   port of correctly authenticated packets from the peer at
	   configuration time.

	   This option honors the "@" prefix in the same way as the PrivateKey=
	   setting of the [WireGuard] section.

	   Added in version 237.

       PersistentKeepalive=
	   Sets a seconds interval, between 1 and 65535 inclusive, of how often
	   to send an authenticated empty packet to the peer for the purpose of
	   keeping a stateful firewall or NAT mapping valid persistently. For
	   example, if the interface very rarely sends traffic, but it might at
	   anytime receive traffic from a peer, and it is behind NAT, the
	   interface might benefit from having a persistent keepalive interval
	   of 25 seconds. If set to 0 or "off", this option is disabled. By
	   default or when unspecified, this option is off. Most users will not
	   need this.

	   Added in version 237.

       RouteTable=
	   The table identifier for the routes to the addresses specified in
	   the AllowedIPs=. Takes a negative boolean value, one of the
	   predefined names "default", "main", and "local", names defined in
	   RouteTable= in networkd.conf(5), or a number in the range
	   1...4294967295. Defaults to unset, and the value specified in the
	   same setting in the [WireGuard] section will be used.

	   Added in version 250.

       RouteMetric=
	   The priority of the routes to the addresses specified in the
	   AllowedIPs=. Takes an integer in the range 0...4294967295. Defaults
	   to unset, and the value specified in the same setting in the
	   [WireGuard] section will be used.

	   Added in version 250.

[BOND] SECTION OPTIONS
       The [Bond] section accepts the following key:

       Mode=
	   Specifies one of the bonding policies. The default is "balance-rr"
	   (round robin). Possible values are "balance-rr", "active-backup",
	   "balance-xor", "broadcast", "802.3ad", "balance-tlb", and
	   "balance-alb".

	   Added in version 216.

       TransmitHashPolicy=
	   Selects the transmit hash policy to use for slave selection in
	   balance-xor, 802.3ad, and tlb modes. Possible values are "layer2",
	   "layer3+4", "layer2+3", "encap2+3", and "encap3+4".

	   Added in version 216.

       LACPTransmitRate=
	   Specifies the rate with which link partner transmits Link
	   Aggregation Control Protocol Data Unit packets in 802.3ad mode.
	   Possible values are "slow", which requests partner to transmit
	   LACPDUs every 30 seconds, and "fast", which requests partner to
	   transmit LACPDUs every second. The default value is "slow".

	   Added in version 216.

       MIIMonitorSec=
	   Specifies the frequency that Media Independent Interface link
	   monitoring will occur. A value of zero disables MII link monitoring.
	   This value is rounded down to the nearest millisecond. The default
	   value is 0.

	   Added in version 216.

       PeerNotifyDelaySec=
	   Specifies the number of seconds the delay between each peer
	   notification (gratuitous ARP and unsolicited IPv6 Neighbor
	   Advertisement) when they are issued after a failover event. This
	   delay should be a multiple of the MII link monitor interval
	   (miimon). The valid range is 0...300s. The default value is 0, which
	   means to match the value of the MIIMonitorSec=.

	   Added in version 256.

       UpDelaySec=
	   Specifies the delay before a link is enabled after a link up status
	   has been detected. This value is rounded down to a multiple of
	   MIIMonitorSec=. The default value is 0.

	   Added in version 216.

       DownDelaySec=
	   Specifies the delay before a link is disabled after a link down
	   status has been detected. This value is rounded down to a multiple
	   of MIIMonitorSec=. The default value is 0.

	   Added in version 216.

       LearnPacketIntervalSec=
	   Specifies the number of seconds between instances where the bonding
	   driver sends learning packets to each slave peer switch. The valid
	   range is 1...0x7fffffff; the default value is 1. This option has an
	   effect only for the balance-tlb and balance-alb modes.

	   Added in version 220.

       AdSelect=
	   Specifies the 802.3ad aggregation selection logic to use. Possible
	   values are "stable", "bandwidth" and "count".

	   Added in version 220.

       AdActorSystemPriority=
	   Specifies the 802.3ad actor system priority. Takes a number in the
	   range 1...65535.

	   Added in version 240.

       AdUserPortKey=
	   Specifies the 802.3ad user defined portion of the port key. Takes a
	   number in the range 0...1023.

	   Added in version 240.

       AdActorSystem=
	   Specifies the 802.3ad system MAC address. This cannot be a null or
	   multicast address.

	   Added in version 240.

       FailOverMACPolicy=
	   Specifies whether the active-backup mode should set all slaves to
	   the same MAC address at the time of enslavement or, when enabled, to
	   perform special handling of the bond's MAC address in accordance
	   with the selected policy. The default policy is none. Possible
	   values are "none", "active" and "follow".

	   Added in version 220.

       ARPValidate=
	   Specifies whether or not ARP probes and replies should be validated
	   in any mode that supports ARP monitoring, or whether non-ARP traffic
	   should be filtered (disregarded) for link monitoring purposes.
	   Possible values are "none", "active", "backup" and "all".

	   Added in version 220.

       ARPIntervalSec=
	   Specifies the ARP link monitoring frequency. A value of 0 disables
	   ARP monitoring. The default value is 0, and the default unit
	   seconds.

	   Added in version 220.

       ARPIPTargets=
	   Specifies the IP addresses to use as ARP monitoring peers when
	   ARPIntervalSec= is greater than 0. These are the targets of the ARP
	   request sent to determine the health of the link to the targets.
	   Specify these values in IPv4 dotted decimal format. At least one IP
	   address must be given for ARP monitoring to function. The maximum
	   number of targets that can be specified is 16. The default value is
	   no IP addresses.

	   Added in version 220.

       ARPAllTargets=
	   Specifies the quantity of ARPIPTargets= that must be reachable in
	   order for the ARP monitor to consider a slave as being up. This
	   option affects only active-backup mode for slaves with ARPValidate
	   enabled. Possible values are "any" and "all".

	   Added in version 220.

       PrimaryReselectPolicy=
	   Specifies the reselection policy for the primary slave. This affects
	   how the primary slave is chosen to become the active slave when
	   failure of the active slave or recovery of the primary slave occurs.
	   This option is designed to prevent flip-flopping between the primary
	   slave and other slaves. Possible values are "always", "better" and
	   "failure".

	   Added in version 220.

       ResendIGMP=
	   Specifies the number of IGMP membership reports to be issued after a
	   failover event. One membership report is issued immediately after
	   the failover, subsequent packets are sent in each 200ms interval.
	   The valid range is 0...255. Defaults to 1. A value of 0 prevents the
	   IGMP membership report from being issued in response to the failover
	   event.

	   Added in version 220.

       PacketsPerSlave=
	   Specify the number of packets to transmit through a slave before
	   moving to the next one. When set to 0, then a slave is chosen at
	   random. The valid range is 0...65535. Defaults to 1. This option
	   only has effect when in balance-rr mode.

	   Added in version 220.

       GratuitousARP=
	   Specify the number of peer notifications (gratuitous ARPs and
	   unsolicited IPv6 Neighbor Advertisements) to be issued after a
	   failover event. As soon as the link is up on the new slave, a peer
	   notification is sent on the bonding device and each VLAN sub-device.
	   This is repeated at each link monitor interval (ARPIntervalSec or
	   MIIMonitorSec, whichever is active) if the number is greater than 1.
	   The valid range is 0...255. The default value is 1. These options
	   affect only the active-backup mode.

	   Added in version 220.

       AllSlavesActive=
	   Takes a boolean. Specifies that duplicate frames (received on
	   inactive ports) should be dropped when false, or delivered when
	   true. Normally, bonding will drop duplicate frames (received on
	   inactive ports), which is desirable for most users. But there are
	   some times it is nice to allow duplicate frames to be delivered. The
	   default value is false (drop duplicate frames received on inactive
	   ports).

	   Added in version 220.

       DynamicTransmitLoadBalancing=
	   Takes a boolean. Specifies if dynamic shuffling of flows is enabled.
	   Applies only for balance-tlb mode. Defaults to unset.

	   Added in version 240.

       MinLinks=
	   Specifies the minimum number of links that must be active before
	   asserting carrier. The default value is 0.

	   Added in version 220.

       ARPMissedMax=
	   Specify the maximum number of arp interval monitor cycle for missed
	   ARP replies. If this number is exceeded, link is reported as down.
	   Defaults to unset.

	   Added in version 256.

       For more detail information see Linux Ethernet Bonding Driver HOWTO[1]

[XFRM] SECTION OPTIONS
       The [Xfrm] section accepts the following keys:

       InterfaceId=
	   Sets the ID/key of the xfrm interface which needs to be associated
	   with a SA/policy. Can be decimal or hexadecimal, valid range is
	   1-0xffffffff. This is mandatory.

	   Added in version 243.

       Independent=
	   Takes a boolean. If false (the default), the xfrm interface must
	   have an underlying device which can be used for hardware offloading.

	   Added in version 243.

       For more detail information see Virtual XFRM Interfaces[18].

[VRF] SECTION OPTIONS
       The [VRF] section only applies for netdevs of kind "vrf" and accepts the
       following key:

       Table=
	   The numeric routing table identifier. This setting is compulsory.

	   Added in version 243.

[BATMANADVANCED] SECTION OPTIONS
       The [BatmanAdvanced] section only applies for netdevs of kind "batadv"
       and accepts the following keys:

       GatewayMode=
	   Takes one of "off", "server", or "client". A batman-adv node can
	   either run in server mode (sharing its internet connection with the
	   mesh) or in client mode (searching for the most suitable internet
	   connection in the mesh) or having the gateway support turned off
	   entirely (which is the default setting).

	   Added in version 248.

       Aggregation=
	   Takes a boolean value. Enables or disables aggregation of originator
	   messages. Defaults to true.

	   Added in version 248.

       BridgeLoopAvoidance=
	   Takes a boolean value. Enables or disables avoidance of loops on
	   bridges. Defaults to true.

	   Added in version 248.

       DistributedArpTable=
	   Takes a boolean value. Enables or disables the distributed ARP
	   table. Defaults to true.

	   Added in version 248.

       Fragmentation=
	   Takes a boolean value. Enables or disables fragmentation. Defaults
	   to true.

	   Added in version 248.

       HopPenalty=
	   The hop penalty setting allows one to modify batctl(8) preference
	   for multihop routes vs. short routes. This integer value is applied
	   to the TQ (Transmit Quality) of each forwarded OGM (Originator
	   Message), thereby propagating the cost of an extra hop (the packet
	   has to be received and retransmitted which costs airtime). A higher
	   hop penalty will make it more unlikely that other nodes will choose
	   this node as intermediate hop towards any given destination. The
	   default hop penalty of '15' is a reasonable value for most setups
	   and probably does not need to be changed. However, mobile nodes
	   could choose a value of 255 (maximum value) to avoid being chosen as
	   a router by other nodes. The minimum value is 0.

	   Added in version 248.

       OriginatorIntervalSec=
	   The value specifies the interval in seconds, unless another time
	   unit is specified in which batman-adv floods the network with its
	   protocol information. See systemd.time(7) for more information.

	   Added in version 248.

       GatewayBandwidthDown=
	   If the node is a server, this parameter is used to inform other
	   nodes in the network about this node's internet connection download
	   bandwidth in bits per second. Just enter any number suffixed with K,
	   M, G or T (base 1000) and the batman-adv module will propagate the
	   entered value in the mesh.

	   Added in version 248.

       GatewayBandwidthUp=
	   If the node is a server, this parameter is used to inform other
	   nodes in the network about this node's internet connection upload
	   bandwidth in bits per second. Just enter any number suffixed with K,
	   M, G or T (base 1000) and the batman-adv module will propagate the
	   entered value in the mesh.

	   Added in version 248.

       RoutingAlgorithm=
	   This can be either "batman-v" or "batman-iv" and describes which
	   routing_algo of batctl(8) to use. The algorithm cannot be changed
	   after interface creation. Defaults to "batman-v".

	   Added in version 248.

[IPOIB] SECTION OPTIONS
       The [IPoIB] section only applies for netdevs of kind "ipoib" and accepts
       the following keys:

       PartitionKey=
	   Takes an integer in the range 1...0xffff, except for 0x8000.
	   Defaults to unset, and the kernel's default is used.

	   Added in version 250.

       Mode=
	   Takes one of the special values "datagram" or "connected". Defaults
	   to unset, and the kernel's default is used.

	   When "datagram", the Infiniband unreliable datagram (UD) transport
	   is used, and so the interface MTU is equal to the IB L2 MTU minus
	   the IPoIB encapsulation header (4 bytes). For example, in a typical
	   IB fabric with a 2K MTU, the IPoIB MTU will be 2048 - 4 = 2044
	   bytes.

	   When "connected", the Infiniband reliable connected (RC) transport
	   is used. Connected mode takes advantage of the connected nature of
	   the IB transport and allows an MTU up to the maximal IP packet size
	   of 64K, which reduces the number of IP packets needed for handling
	   large UDP datagrams, TCP segments, etc and increases the performance
	   for large messages.

	   Added in version 250.

       IgnoreUserspaceMulticastGroup=
	   Takes an boolean value. When true, the kernel ignores multicast
	   groups handled by userspace. Defaults to unset, and the kernel's
	   default is used.

	   Added in version 250.

[WLAN] SECTION OPTIONS
       The [WLAN] section only applies to WLAN interfaces, and accepts the
       following keys:

       PhysicalDevice=
	   Specifies the name or index of the physical WLAN device (e.g.  "0"
	   or "phy0"). The list of the physical WLAN devices that exist on the
	   host can be obtained by iw phy command. This option is mandatory.

	   Added in version 251.

       Type=
	   Specifies the type of the interface. Takes one of the "ad-hoc",
	   "station", "ap", "ap-vlan", "wds", "monitor", "mesh-point",
	   "p2p-client", "p2p-go", "p2p-device", "ocb", and "nan". This option
	   is mandatory.

	   Added in version 251.

       WDS=
	   Enables the Wireless Distribution System (WDS) mode on the
	   interface. The mode is also known as the "4 address mode". Takes a
	   boolean value. Defaults to unset, and the kernel's default will be
	   used.

	   Added in version 251.

EXAMPLES
       Example 1. /etc/systemd/network/25-bridge.netdev

	   [NetDev]
	   Name=bridge0
	   Kind=bridge

       Example 2. /etc/systemd/network/25-vlan1.netdev

	   [Match]
	   Virtualization=no

	   [NetDev]
	   Name=vlan1
	   Kind=vlan

	   [VLAN]
	   Id=1

       Example 3. /etc/systemd/network/25-ipip.netdev

	   [NetDev]
	   Name=ipip-tun
	   Kind=ipip
	   MTUBytes=1480

	   [Tunnel]
	   Local=192.168.223.238
	   Remote=192.169.224.239
	   TTL=64

       Example 4. /etc/systemd/network/1-fou-tunnel.netdev

	   [NetDev]
	   Name=fou-tun
	   Kind=fou

	   [FooOverUDP]
	   Port=5555
	   Protocol=4

       Example 5. /etc/systemd/network/25-fou-ipip.netdev

	   [NetDev]
	   Name=ipip-tun
	   Kind=ipip

	   [Tunnel]
	   Independent=yes
	   Local=10.65.208.212
	   Remote=10.65.208.211
	   FooOverUDP=yes
	   FOUDestinationPort=5555

       Example 6. /etc/systemd/network/25-tap.netdev

	   [NetDev]
	   Name=tap-test
	   Kind=tap

	   [Tap]
	   MultiQueue=yes
	   PacketInfo=yes

       Example 7. /etc/systemd/network/25-sit.netdev

	   [NetDev]
	   Name=sit-tun
	   Kind=sit
	   MTUBytes=1480

	   [Tunnel]
	   Local=10.65.223.238
	   Remote=10.65.223.239

       Example 8. /etc/systemd/network/25-6rd.netdev

	   [NetDev]
	   Name=6rd-tun
	   Kind=sit
	   MTUBytes=1480

	   [Tunnel]
	   Local=10.65.223.238
	   IPv6RapidDeploymentPrefix=2602::/24

       Example 9. /etc/systemd/network/25-gre.netdev

	   [NetDev]
	   Name=gre-tun
	   Kind=gre
	   MTUBytes=1480

	   [Tunnel]
	   Local=10.65.223.238
	   Remote=10.65.223.239

       Example 10. /etc/systemd/network/25-ip6gre.netdev

	   [NetDev]
	   Name=ip6gre-tun
	   Kind=ip6gre

	   [Tunnel]
	   Key=123

       Example 11. /etc/systemd/network/25-vti.netdev

	   [NetDev]
	   Name=vti-tun
	   Kind=vti
	   MTUBytes=1480

	   [Tunnel]
	   Local=10.65.223.238
	   Remote=10.65.223.239

       Example 12. /etc/systemd/network/25-veth.netdev

	   [NetDev]
	   Name=veth-test
	   Kind=veth

	   [Peer]
	   Name=veth-peer

       Example 13. /etc/systemd/network/25-bond.netdev

	   [NetDev]
	   Name=bond1
	   Kind=bond

	   [Bond]
	   Mode=802.3ad
	   TransmitHashPolicy=layer3+4
	   MIIMonitorSec=1s
	   LACPTransmitRate=fast

       Example 14. /etc/systemd/network/25-dummy.netdev

	   [NetDev]
	   Name=dummy-test
	   Kind=dummy
	   MACAddress=12:34:56:78:9a:bc

       Example 15. /etc/systemd/network/25-vrf.netdev

       Create a VRF interface with table 42.

	   [NetDev]
	   Name=vrf-test
	   Kind=vrf

	   [VRF]
	   Table=42

       Example 16. /etc/systemd/network/25-macvtap.netdev

       Create a MacVTap device.

	   [NetDev]
	   Name=macvtap-test
	   Kind=macvtap

       Example 17. /etc/systemd/network/25-wireguard.netdev

	   [NetDev]
	   Name=wg0
	   Kind=wireguard

	   [WireGuard]
	   PrivateKey=EEGlnEPYJV//kbvvIqxKkQwOiS+UENyPncC4bF46ong=
	   ListenPort=51820

	   [WireGuardPeer]
	   PublicKey=RDf+LSpeEre7YEIKaxg+wbpsNV7du+ktR99uBEtIiCA=
	   AllowedIPs=fd31:bf08:57cb::/48,192.168.26.0/24
	   Endpoint=wireguard.example.com:51820

       Example 18. /etc/systemd/network/27-xfrm.netdev

	   [NetDev]
	   Name=xfrm0
	   Kind=xfrm

	   [Xfrm]
	   Independent=yes

SEE ALSO
       systemd(1), systemd-networkd.service(8), systemd.link(5),
       systemd.network(5), systemd-network-generator.service(8)

NOTES
	1. Linux Ethernet Bonding Driver HOWTO
	   https://docs.kernel.org/networking/bonding.html

	2. RFC 2784
	   https://tools.ietf.org/html/rfc2784

	3. IEEE 802.1Q
	   http://www.ieee802.org/1/pages/802.1Q.html

	4. VRF
	   https://docs.kernel.org/networking/vrf.html

	5. B.A.T.M.A.N. Advanced
	   https://www.open-mesh.org/projects/open-mesh/wiki

	6. System and Service Credentials
	   https://systemd.io/CREDENTIALS

	7. Distributed Overlay Virtual Ethernet (DOVE)
	   https://en.wikipedia.org/wiki/Distributed_Overlay_Virtual_Ethernet

	8. VXLAN Group Policy
	   https://tools.ietf.org/html/draft-smith-vxlan-group-policy

	9. Generic Protocol Extension for VXLAN
	   https://tools.ietf.org/html/draft-ietf-nvo3-vxlan-gpe-07

       10. Type of Service in the Internet Protocol Suite
	   http://tools.ietf.org/html/rfc1349

       11. RFC 6437
	   https://tools.ietf.org/html/rfc6437

       12. RFC 2460
	   https://tools.ietf.org/html/rfc2460

       13. RFC 2473
	   https://tools.ietf.org/html/rfc2473#section-4.1.1

       14. ip-xfrm -- transform configuration
	   https://man7.org/linux/man-pages/man8/ip-xfrm.8.html

       15. Foo over UDP
	   https://lwn.net/Articles/614348

       16. IPv6 Rapid Deployment
	   https://tools.ietf.org/html/rfc5569

       17. Generic UDP Encapsulation
	   https://lwn.net/Articles/615044

       18. Virtual XFRM Interfaces
	   https://lwn.net/Articles/757391

systemd 257.13						      SYSTEMD.NETDEV(5)