search..
No manual entry for -- in section 5
SYSTEMD.LINK(5)			  systemd.link			SYSTEMD.LINK(5)

NAME
       systemd.link - Network device configuration

SYNOPSIS
       link.link

DESCRIPTION
       A plain ini-style text file that encodes configuration for matching
       network devices, used by systemd-udevd(8) and in particular its
       net_setup_link builtin. See systemd.syntax(7) for a general description
       of the syntax.

       Note that some distributions may incorporate .link files in their early
       boot facilities (e.g. by including copies of the .link files in
       initramfs). As such it may be necessary to take manual steps to ensure
       that any local changes are consistent with early-boot storage
       facilities. The relevant distribution-specific documentation should be
       consulted.

       The .link files are read from the files located in the system network
       directory /usr/lib/systemd/network and /usr/local/lib/systemd/network
       [1], the volatile runtime network directory /run/systemd/network, and
       the local administration network directory /etc/systemd/network. All
       configuration files are collectively sorted and processed in
       alphanumeric order, regardless of the directories in which they live.
       However, files with identical filenames replace each other. It is
       recommended that each filename is prefixed with a number smaller than
       "70" (e.g.  10-eth0.link). Otherwise, the default .link files or those
       generated by systemd-network-generator.service(8) may take precedence
       over user configured files. Files in /etc/ have the highest priority,
       files in /run/ take precedence over files with the same name in
       /usr/lib/. This can be used to override a system-supplied link file with
       a local file if needed. As a special case, an empty file (file size 0)
       or symlink with the same name pointing to /dev/null disables the
       configuration file entirely (it is "masked").

       Along with the link file foo.link, a "drop-in" directory foo.link.d/ may
       exist. All files with the suffix ".conf" from this directory will be
       merged in the alphanumeric order and parsed after the main file itself
       has been parsed. This is useful to alter or add configuration settings,
       without having to modify the main configuration file. Each drop-in file
       must have appropriate section headers.

       In addition to /etc/systemd/network, drop-in ".d" directories can be
       placed in /usr/lib/systemd/network or /run/systemd/network directories.
       Drop-in files in /etc/ take precedence over those in /run/ which in turn
       take precedence over those in /usr/lib/. Drop-in files under any of
       these directories take precedence over the main link file wherever
       located.

       The link file contains a [Match] section, which determines if a given
       link file may be applied to a given device, as well as a [Link] section
       specifying how the device should be configured. The first (in lexical
       order) of the link files that matches a given device is applied. Note
       that a default file 99-default.link is shipped by the system. Any
       user-supplied .link should hence have a lexically earlier name to be
       considered at all.

       See udevadm(8) for diagnosing problems with .link files.

[MATCH] SECTION OPTIONS
       A link file is said to match an interface if all matches specified by
       the [Match] section are satisfied. When a link file does not contain
       valid settings in [Match] section, then the file will match all
       interfaces and systemd-udevd warns about that. Hint: to avoid the
       warning and to make it clear that all interfaces shall be matched, add
       the following:

	   OriginalName=*

       The first (in alphanumeric order) of the link files that matches a given
       interface is applied, all later files are ignored, even if they match as
       well. The following keys are accepted:

       MACAddress=
	   A whitespace-separated list of hardware addresses. The acceptable
	   formats are:

	   colon-delimited hexadecimal
	       Each field must be one byte. E.g.  "12:34:56:78:90:ab" or
	       "AA:BB:CC:DD:EE:FF".

	       Added in version 250.

	   hyphen-delimited hexadecimal
	       Each field must be one byte. E.g.  "12-34-56-78-90-ab" or
	       "AA-BB-CC-DD-EE-FF".

	       Added in version 250.

	   dot-delimited hexadecimal
	       Each field must be two bytes. E.g.  "1234.5678.90ab" or
	       "AABB.CCDD.EEFF".

	       Added in version 250.

	   IPv4 address format
	       E.g.  "127.0.0.1" or "192.168.0.1".

	       Added in version 250.

	   IPv6 address format
	       E.g.  "2001:0db8:85a3::8a2e:0370:7334" or "::1".

	       Added in version 250.

	   The total length of each MAC address must be 4 (for IPv4 tunnel), 6
	   (for Ethernet), 16 (for IPv6 tunnel), or 20 (for InfiniBand). This
	   option may appear more than once, in which case the lists are
	   merged. If the empty string is assigned to this option, the list of
	   hardware addresses defined prior to this is reset. Defaults to
	   unset.

	   Added in version 211.

       PermanentMACAddress=
	   A whitespace-separated list of hardware's permanent addresses. While
	   MACAddress= matches the device's current MAC address, this matches
	   the device's permanent MAC address, which may be different from the
	   current one. Use full colon-, hyphen- or dot-delimited hexadecimal,
	   or IPv4 or IPv6 address format. This option may appear more than
	   once, in which case the lists are merged. If the empty string is
	   assigned to this option, the list of hardware addresses defined
	   prior to this is reset. Defaults to unset.

	   Added in version 245.

       Path=
	   A whitespace-separated list of shell-style globs matching the
	   persistent path, as exposed by the udev property ID_PATH.

	   Added in version 211.

       Driver=
	   A whitespace-separated list of shell-style globs matching the driver
	   currently bound to the device, as exposed by the udev property
	   ID_NET_DRIVER of its parent device, or if that is not set, the
	   driver as exposed by ethtool -i of the device itself. If the list is
	   prefixed with a "!", the test is inverted.

	   Added in version 211.

       Type=
	   A whitespace-separated list of shell-style globs matching the device
	   type, as exposed by networkctl list. If the list is prefixed with a
	   "!", the test is inverted. Some valid values are "ether",
	   "loopback", "wlan", "wwan". Valid types are named either from the
	   udev "DEVTYPE" attribute, or "ARPHRD_" macros in linux/if_arp.h, so
	   this is not comprehensive.

	   Added in version 211.

       Kind=
	   A whitespace-separated list of shell-style globs matching the device
	   kind, as exposed by networkctl status INTERFACE or ip -d link show
	   INTERFACE. If the list is prefixed with a "!", the test is inverted.
	   Some valid values are "bond", "bridge", "gre", "tun", "veth". Valid
	   kinds are given by netlink's "IFLA_INFO_KIND" attribute, so this is
	   not comprehensive.

	   Added in version 251.

       Property=
	   A whitespace-separated list of udev property names with their values
	   after equals sign ("="). If multiple properties are specified, the
	   test results are ANDed. If the list is prefixed with a "!", the test
	   is inverted. If a value contains white spaces, then please quote
	   whole key and value pair. If a value contains quotation, then please
	   escape the quotation with "\".

	   Example: if a .link file has the following:

	       Property=ID_MODEL_ID=9999 "ID_VENDOR_FROM_DATABASE=vendor name" "KEY=with \"quotation\""

	   then, the .link file matches only when an interface has all the
	   above three properties.

	   Added in version 243.

       OriginalName=
	   A whitespace-separated list of shell-style globs matching the device
	   name, as exposed by the udev property "INTERFACE". This cannot be
	   used to match on names that have already been changed from
	   userspace. Caution is advised when matching on kernel-assigned
	   names, as they are known to be unstable between reboots.

	   Added in version 218.

       Host=
	   Matches against the hostname or machine ID of the host. See
	   ConditionHost= in systemd.unit(5) for details. When prefixed with an
	   exclamation mark ("!"), the result is negated. If an empty string is
	   assigned, the previously assigned value is cleared.

	   Added in version 211.

       Virtualization=
	   Checks whether the system is executed in a virtualized environment
	   and optionally test whether it is a specific implementation. See
	   ConditionVirtualization= in systemd.unit(5) for details. When
	   prefixed with an exclamation mark ("!"), the result is negated. If
	   an empty string is assigned, the previously assigned value is
	   cleared.

	   Added in version 211.

       KernelCommandLine=
	   Checks whether a specific kernel command line option is set. See
	   ConditionKernelCommandLine= in systemd.unit(5) for details. When
	   prefixed with an exclamation mark ("!"), the result is negated. If
	   an empty string is assigned, the previously assigned value is
	   cleared.

	   Added in version 211.

       KernelVersion=
	   Checks whether the kernel version (as reported by uname -r) matches
	   a certain expression. See ConditionKernelVersion= in systemd.unit(5)
	   for details. When prefixed with an exclamation mark ("!"), the
	   result is negated. If an empty string is assigned, the previously
	   assigned value is cleared.

	   Added in version 237.

       Credential=
	   Checks whether the specified credential was passed to the
	   systemd-udevd.service service. See System and Service Credentials[2]
	   for details. When prefixed with an exclamation mark ("!"), the
	   result is negated. If an empty string is assigned, the previously
	   assigned value is cleared.

	   Added in version 252.

       Architecture=
	   Checks whether the system is running on a specific architecture. See
	   ConditionArchitecture= in systemd.unit(5) for details. When prefixed
	   with an exclamation mark ("!"), the result is negated. If an empty
	   string is assigned, the previously assigned value is cleared.

	   Added in version 211.

       Firmware=
	   Checks whether the system is running on a machine with the specified
	   firmware. See ConditionFirmware= in systemd.unit(5) for details.
	   When prefixed with an exclamation mark ("!"), the result is negated.
	   If an empty string is assigned, the previously assigned value is
	   cleared.

	   Added in version 249.

[LINK] SECTION OPTIONS
       The [Link] section accepts the following keys:

       Description=
	   A description of the device.

	   Added in version 211.

       Property=
	   Set specified udev properties. This takes space separated list of
	   key-value pairs concatenated with equal sign ("="). Example:

	       Property=HOGE=foo BAR=baz

	   This option supports simple specifier expansion, see the Specifiers
	   section below. This option can be specified multiple times. If an
	   empty string is assigned, then the all previous assignments are
	   cleared.

	   This setting is useful to configure the "ID_NET_MANAGED_BY="
	   property which declares whictroff:<standard input>:1255: warning [p 10, 3.7i, div '3tbd44,0', 0.0i]: cannot break line
troff:<standard input>:1360: warning [p 10, 3.7i, div '3tbd59,0', 0.0i]: cannot break line
troff:<standard input>:1367: warning [p 10, 3.7i, div '3tbd60,0', 0.0i]: cannot break line
h network management service shall
	   manage the interface, which is respected by systemd-networkd(8) and
	   others. Use

	       Property=ID_NET_MANAGED_BY=io.systemd.Network

	   to declare explicitly that systemd-networkd shall manage the
	   interface, or set the property to something else to declare
	   explicitly it shall not do so. See systemd.network(5) for details
	   how this property is used to match interface names.

	   Added in version 256.

       ImportProperty=
	   Import specified udev properties from the saved database. This takes
	   space separated list of property names. Example:

	       ImportProperty=HOGE BAR

	   This option supports simple specifier expansion, see the Specifiers
	   section below. This option can be specified multiple times. If an
	   empty string is assigned, then the all previous assignments are
	   cleared.

	   If the same property is also set in Property= in the above, then the
	   imported property value will be overridden by the value specified in
	   Property=.

	   Added in version 256.

       UnsetProperty=
	   Unset specified udev properties. This takes space separated list of
	   property names. Example:

	       UnsetProperty=HOGE BAR

	   This option supports simple specifier expansion, see the Specifiers
	   section below. This option can be specified multiple times. If an
	   empty string is assigned, then the all previous assignments are
	   cleared.

	   This setting is applied after ImportProperty= and Property= are
	   applied. Hence, if the same property is specified in ImportProperty=
	   or Property=, then the imported or specified property value will be
	   ignored, and the property will be unset.

	   Added in version 256.

       Alias=
	   The ifalias interface property is set to this value.

	   Added in version 211.

       MACAddressPolicy=
	   The policy by which the MAC address should be set. The available
	   policies are:

	   persistent
	       If the hardware has a persistent MAC address, as most hardware
	       should, and if it is used by the kernel, nothing is done.
	       Otherwise, a new MAC address is generated which is guaranteed to
	       be the same on every boot for the given machine and the given
	       device, but which is otherwise random. This feature depends on
	       ID_NET_NAME_* properties to exist for the link. On hardware
	       where these properties are not set, the generation of a
	       persistent MAC address will fail.

	       Added in version 211.

	   random
	       If the kernel is using a random MAC address, nothing is done.
	       Otherwise, a new address is randomly generated each time the
	       device appears, typically at boot. Either way, the random
	       address will have the "unicast" and "locally administered" bits
	       set.

	       Added in version 211.

	   none
	       Keeps the MAC address assigned by the kernel. Or use the MAC
	       address specified in MACAddress=.

	       Added in version 227.

	   An empty string assignment is equivalent to setting "none".

	   Added in version 211.

       MACAddress=
	   The interface MAC address to use. For this setting to take effect,
	   MACAddressPolicy= must either be unset, empty, or "none".

	   Added in version 211.

       NamePolicy=
	   An ordered, space-separated list of policies by which the interface
	   name should be set.	NamePolicy= may be disabled by specifying
	   net.ifnames=0 on the kernel command line. Each of the policies may
	   fail, and the first successful one is used. The name is not set
	   directly, but is exported to udev as the property ID_NET_NAME, which
	   is, by default, used by a udev(7), rule to set NAME. The available
	   policies are:

	   kernel
	       If the kernel claims that the name it has set for a device is
	       predictable, then no renaming is performed.

	       Added in version 216.

	   database
	       The name is set based on entries in the udev's Hardware Database
	       with the key ID_NET_NAME_FROM_DATABASE.

	       Added in version 211.

	   onboard
	       The name is set based on information given by the firmware for
	       on-board devices, as exported by the udev property
	       ID_NET_NAME_ONBOARD. See systemd.net-naming-scheme(7).

	       Added in version 211.

	   slot
	       The name is set based on information given by the firmware for
	       hot-plug devices, as exported by the udev property
	       ID_NET_NAME_SLOT. See systemd.net-naming-scheme(7).

	       Added in version 211.

	   path
	       The name is set based on the device's physical location, as
	       exported by the udev property ID_NET_NAME_PATH. See systemd.net-
	       naming-scheme(7).

	       Added in version 211.

	   mac
	       The name is set based on the device's persistent MAC address, as
	       exported by the udev property ID_NET_NAME_MAC. See systemd.net-
	       naming-scheme(7).

	       Added in version 211.

	   keep
	       If the device already had a name given by userspace (as part of
	       creation of the device or a rename), keep it.

	       Added in version 241.

	   Added in version 211.

       Name=
	   The interface name to use. This option has lower precedence than
	   NamePolicy=, so for this setting to take effect, NamePolicy= must
	   either be unset, empty, disabled, or all policies configured there
	   must fail. Also see the example below with "Name=dmz0".

	   Note that specifying a name that the kernel might use for another
	   interface (for example "eth0") is dangerous because the name
	   assignment done by udev will race with the assignment done by the
	   kernel, and only one interface may use the name. Depending on the
	   order of operations, either udev or the kernel will win, making the
	   naming unpredictable. It is best to use some different prefix, for
	   example "internal0"/"external0" or "lan0"/"lan1"/"lan3".

	   Interface names must have a minimum length of 1 character and a
	   maximum length of 15 characters, and may contain any 7bit ASCII
	   character, with the exception of control characters, ":", "/" and
	   "%". While "."  is an allowed character, it is recommended to avoid
	   it when naming interfaces as various tools (such as resolvconf(1))
	   use it as separator character. Also, fully numeric interface names
	   are not allowed (in order to avoid ambiguity with interface
	   specification by numeric indexes), nor are the special strings ".",
	   "..", "all" and "default".

	   Added in version 211.

       AlternativeNamesPolicy=
	   A space-separated list of policies by which the interface's
	   alternative names should be set. Each of the policies may fail, and
	   all successful policies are used. The available policies are
	   "database", "onboard", "slot", "path", and "mac". If the kernel does
	   not support the alternative names, then this setting will be
	   ignored.

	   Added in version 245.

       AlternativeName=
	   The alternative interface name to use. This option can be specified
	   multiple times. If the empty string is assigned to this option, the
	   list is reset, and all prior assignments have no effect. If the
	   kernel does not support the alternative names, then this setting
	   will be ignored.

	   Alternative interface names may be used to identify interfaces in
	   various tools. In contrast to the primary name (as configured with
	   Name= above) there may be multiple alternative names referring to
	   the same interface. Alternative names may have a maximum length of
	   127 characters, in contrast to the 15 allowed for the primary
	   interface name, but otherwise are subject to the same naming
	   constraints.

	   Added in version 245.

       TransmitQueues=
	   Specifies the device's number of transmit queues. An integer in the
	   range 1...4096. When unset, the kernel's default will be used.

	   Added in version 248.

       ReceiveQueues=
	   Specifies the device's number of receive queues. An integer in the
	   range 1...4096. When unset, the kernel's default will be used.

	   Added in version 248.

       TransmitQueueLength=
	   Specifies the transmit queue length of the device in number of
	   packets. An unsigned integer in the range 0...4294967294. When
	   unset, the kernel's default will be used.

	   Added in version 248.

       MTUBytes=
	   The maximum transmission unit in bytes to set for the device. The
	   usual suffixes K, M, G are supported and are understood to the base
	   of 1024.

	   Added in version 211.

       BitsPerSecond=
	   The speed to set for the device, the value is rounded down to the
	   nearest Mbps. The usual suffixes K, M, G are supported and are
	   understood to the base of 1000.

	   Added in version 211.

       Duplex=
	   The duplex mode to set for the device. The accepted values are half
	   and full.

	   Added in version 211.

       AutoNegotiation=
	   Takes a boolean. If set to yes, automatic negotiation of
	   transmission parameters is enabled. Autonegotiation is a procedure
	   by which two connected ethernet devices choose common transmission
	   parameters, such as speed, duplex mode, and flow control. When
	   unset, the kernel's default will be used.

	   Note that if autonegotiation is enabled, speed and duplex settings
	   are read-only. If autonegotiation is disabled, speed and duplex
	   settings are writable if the driver supports multiple link modes.

	   Added in version 233.

       WakeOnLan=
	   The Wake-on-LAN policy to set for the device. Takes the special
	   value "off" which disables Wake-on-LAN, or space separated list of
	   the following words:

	   phy
	       Wake on PHY activity.

	       Added in version 211.

	   unicast
	       Wake on unicast messages.

	       Added in version 235.

	   multicast
	       Wake on multicast messages.

	       Added in version 235.

	   broadcast
	       Wake on broadcast messages.

	       Added in version 235.

	   arp
	       Wake on ARP.

	       Added in version 235.

	   magic
	       Wake on receipt of a magic packet.

	       Added in version 211.

	   secureon
	       Enable SecureOn password for MagicPacket. Implied when
	       WakeOnLanPassword= is specified. If specified without
	       WakeOnLanPassword= option, then the password is read from the
	       credential "LINK.link.wol.password" (e.g.,
	       "60-foo.link.wol.password"), and if the credential not found,
	       then read from "wol.password". See
	       ImportCredential=/LoadCredential=/SetCredential= in
	       systemd.exec(5) for details. The password in the credential,
	       must be 6 bytes in hex format with each byte separated by a
	       colon (":") like an Ethernet MAC address, e.g.,
	       "aa:bb:cc:dd:ee:ff".

	       Added in version 235.

	   Defaults to unset, and the device's default will be used. This
	   setting can be specified multiple times. If an empty string is
	   assigned, then the all previous assignments are cleared.

	   Added in version 211.

       WakeOnLanPassword=
	   Specifies the SecureOn password for MagicPacket. Takes an absolute
	   path to a regular file or an AF_UNIX stream socket, or the plain
	   password. When a path to a regular file is specified, the password
	   is read from it. When an AF_UNIX stream socket is specified, a
	   connection is made to it and the password is read from it. The
	   password must be 6 bytes in hex format with each byte separated by a
	   colon (":") like an Ethernet MAC address, e.g., "aa:bb:cc:dd:ee:ff".
	   This implies WakeOnLan=secureon. Defaults to unset, and the current
	   value will not be changed.

	   Added in version 250.

       Port=
	   The port option is used to select the device port. The supported
	   values are:

	   tp
	       An Ethernet interface using Twisted-Pair cable as the medium.

	       Added in version 234.

	   aui
	       Attachment Unit Interface (AUI). Normally used with hubs.

	       Added in version 234.

	   bnc
	       An Ethernet interface using BNC connectors and co-axial cable.

	       Added in version 234.

	   mii
	       An Ethernet interface using a Media Independent Interface (MII).

	       Added in version 234.

	   fibre
	       An Ethernet interface using Optical Fibre as the medium.

	       Added in version 234.

	   Added in version 234.

       Advertise=
	   This sets what speeds and duplex modes of operation are advertised
	   for auto-negotiation. This implies "AutoNegotiation=yes". The
	   supported values are:

	   Table 1. Supported advertise values
	   +----------------------------+--------------+-------------+
	   | Advertise			| Speed (Mbps) | Duplex Mode |
	   +----------------------------+--------------+-------------+
	   | 10baset-full		| 10	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 10baset1brr-full		| 10	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 10baset1l-full		| 10	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 10baset1s-full		| 10	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 10baset-half		| 10	       | half	     |
	   +----------------------------+--------------+-------------+
	   | 10baset1s-half		| 10	       | half	     |
	   +----------------------------+--------------+-------------+
	   | 10baset1s-p2mp-half	| 10	       | half	     |
	   +----------------------------+--------------+-------------+
	   | 100basefx-full		| 100	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 100baset-full		| 100	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 100baset1-full		| 100	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 100basefx-half		| 100	       | half	     |
	   +----------------------------+--------------+-------------+
	   | 100baset-half		| 100	       | half	     |
	   +----------------------------+--------------+-------------+
	   | 1000basekx-full		| 1000	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 1000baset-full		| 1000	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 1000baset1-full		| 1000	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 1000basex-full		| 1000	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 1000baset-half		| 1000	       | half	     |
	   +----------------------------+--------------+-------------+
	   | 2500baset-full		| 2500	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 2500basex-full		| 2500	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 5000baset-full		| 5000	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 10000baser-fec		| 10000	       |	     |
	   +----------------------------+--------------+-------------+
	   | 10000basecr-full		| 10000	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 10000baseer-full		| 10000	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 10000basekr-full		| 10000	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 10000basekx4-full		| 10000	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 10000baselr-full		| 10000	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 10000baselrm-full		| 10000	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 10000basesr-full		| 10000	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 10000baset-full		| 10000	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 20000basekr2-full		| 20000	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 20000basemld2-full		| 20000	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 25000basecr-full		| 25000	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 25000basekr-full		| 25000	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 25000basesr-full		| 25000	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 40000basecr4-full		| 40000	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 40000basekr4-full		| 40000	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 40000baselr4-full		| 40000	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 40000basesr4-full		| 40000	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 50000basecr-full		| 50000	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 50000basecr2-full		| 50000	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 50000basedr-full		| 50000	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 50000basekr-full		| 50000	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 50000basekr2-full		| 50000	       | fulltroff:<standard input>:2161: warning [p 12, 10.5i, div '3tbd1,2', 1.3i]: cannot break line
	|
	   +----------------------------+--------------+-------------+
	   | 50000baselr-er-fr-full	| 50000	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 50000basesr-full		| 50000	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 50000basesr2-full		| 50000	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 56000basecr4-full		| 56000	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 56000basekr4-full		| 56000	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 56000baselr4-full		| 56000	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 56000basesr4-full		| 56000	       | full	     |
	   +----------------------------+--------------+-------------+
	   | 100000basecr-full		| 100000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 100000basecr2-full		| 100000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 100000basecr4-full		| 100000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 100000basedr-full		| 100000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 100000basedr2-full		| 100000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 100000basekr-full		| 100000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 100000basekr2-full		| 100000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 100000basekr4-full		| 100000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 100000baselr-er-fr-full	| 100000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 100000baselr2-er2-fr2-full | 100000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 100000baselr4-er4-full	| 100000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 100000basesr-full		| 100000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 100000basesr2-full		| 100000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 100000basesr4-full		| 100000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 200000basecr-full		| 200000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 200000basecr2-full		| 200000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 200000basecr4-full		| 200000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 200000basedr-2-full	| 200000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 200000basedr-full		| 200000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 200000basedr2-full		| 200000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 200000basedr4-full		| 200000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 200000basekr-full		| 200000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 200000basekr2-full		| 200000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 200000basekr4-full		| 200000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 200000baselr2-er2-fr2-full | 200000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 200000baselr4-er4-fr4-full | 200000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 200000basesr-full		| 200000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 200000basesr2-full		| 200000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 200000basesr4-full		| 200000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 200000basevr-full		| 200000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 400000basecr2-full		| 400000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 400000basecr4-full		| 400000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 400000basecr8-full		| 400000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 400000basedr2-2-full	| 400000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 400000basedr2-full		| 400000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 400000basedr4-full		| 400000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 400000basedr8-full		| 400000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 400000basekr2-full		| 400000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 400000basekr4-full		| 400000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 400000basekr8-full		| 400000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 400000baselr4-er4-fr4-full | 400000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 400000baselr8-er8-fr8-full | 400000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 400000basesr2-full		| 400000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 400000basesr4-full		| 400000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 400000basesr8-full		| 400000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 400000basevr2-full		| 400000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 800000basecr4-full		| 800000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 800000basecr8-full		| 800000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 800000basedr4-2-full	| 800000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 800000basedr4-full		| 800000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 800000basedr8-2-full	| 800000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 800000basedr8-full		| 800000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 800000basekr4-full		| 800000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 800000basekr8-full		| 800000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 800000basesr4-full		| 800000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 800000basesr8-full		| 800000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 800000basevr4-full		| 800000       | full	     |
	   +----------------------------+--------------+-------------+
	   | 800000basevr8-full		| 800000       | full	     |
	   +----------------------------+--------------+-------------+
	   | asym-pause			|	       |	     |
	   +----------------------------+--------------+-------------+
	   | aui			|	       |	     |
	   +----------------------------+--------------+-------------+
	   | autonegotiation		|	       |	     |
	   +----------------------------+--------------+-------------+
	   | backplane			|	       |	     |
	   +----------------------------+--------------+-------------+
	   | bnc			|	       |	     |
	   +----------------------------+--------------+-------------+
	   | fec-baser			|	       |	     |
	   +----------------------------+--------------+-------------+
	   | fec-llrs			|	       |	     |
	   +----------------------------+--------------+-------------+
	   | fec-none			|	       |	     |
	   +----------------------------+--------------+-------------+
	   | fec-rs			|	       |	     |
	   +----------------------------+--------------+-------------+
	   | fibre			|	       |	     |
	   +----------------------------+--------------+-------------+
	   | mii			|	       |	     |
	   +----------------------------+--------------+-------------+
	   | pause			|	       |	     |
	   +----------------------------+--------------+-------------+
	   | tp				|	       |	     |
	   +----------------------------+--------------+-------------+

	   By default, this is unset, i.e. all possible modes will be
	   advertised. This option may be specified more than once, in which
	   case all specified speeds and modes are advertised. If the empty
	   string is assigned to this option, the list is reset, and all prior
	   assignments have no effect.

	   Added in version 240.

       ReceiveChecksumOffload=
	   Takes a boolean. If set to true, hardware offload for checksumming
	   of ingress network packets is enabled. When unset, the kernel's
	   default will be used.

	   Added in version 245.

       TransmitChecksumOffload=
	   Takes a boolean. If set to true, hardware offload for checksumming
	   of egress network packets is enabled. When unset, the kernel's
	   default will be used.

	   Added in version 245.

       TCPSegmentationOffload=
	   Takes a boolean. If set to true, TCP Segmentation Offload (TSO) is
	   enabled. When unset, the kernel's default will be used.

	   Added in version 232.

       TCP6SegmentationOffload=
	   Takes a boolean. If set to true, TCP6 Segmentation Offload
	   (tx-tcp6-segmentation) is enabled. When unset, the kernel's default
	   will be used.

	   Added in version 235.

       GenericSegmentationOffload=
	   Takes a boolean. If set to true, Generic Segmentation Offload (GSO)
	   is enabled. When unset, the kernel's default will be used.

	   Added in version 232.

       GenericReceiveOffload=
	   Takes a boolean. If set to true, Generic Receive Offload (GRO) is
	   enabled. When unset, the kernel's default will be used.

	   Added in version 232.

       GenericReceiveOffloadHardware=
	   Takes a boolean. If set to true, hardware accelerated Generic
	   Receive Offload (GRO) is enabled. When unset, the kernel's default
	   will be used.

	   Added in version 250.

       LargeReceiveOffload=
	   Takes a boolean. If set to true, Large Receive Offload (LRO) is
	   enabled. When unset, the kernel's default will be used.

	   Added in version 232.

       ReceivePacketSteeringCPUMask=
	   Configures Receive Packet Steering (RPS) list of CPUs to which RPS
	   may forward traffic. Takes a list of CPU indices or ranges separated
	   by either whitespace or commas. Alternatively, takes the special
	   value "all", which will include all available CPUs in the mask. CPU
	   ranges are specified by the lower and upper CPU indices separated by
	   a dash (e.g.	 "2-6"). This option may be specified more than once,
	   in which case the specified list of CPU ranges are merged. If an
	   empty string is assigned, the list is reset, all assignments prior
	   to this will have no effect. Defaults to unset and RPS CPU list is
	   unchanged. To disable RPS when it was previously enabled, use the
	   special value "disable".

	   Added in version 256.

       ReceiveVLANCTAGHardwareAcceleration=
	   Takes a boolean. If set to true, receive VLAN CTAG hardware
	   acceleration is enabled. When unset, the kernel's default will be
	   used.

	   Added in version 250.

       TransmitVLANCTAGHardwareAcceleration=
	   Takes a boolean. If set to true, transmit VLAN CTAG hardware
	   acceleration is enabled. When unset, the kernel's default will be
	   used.

	   Added in version 250.

       ReceiveVLANCTAGFilter=
	   Takes a boolean. If set to true, receive filtering on VLAN CTAGs is
	   enabled. When unset, the kernel's default will be used.

	   Added in version 250.

       TransmitVLANSTAGHardwareAcceleration=
	   Takes a boolean. If set to true, transmit VLAN STAG hardware
	   acceleration is enabled. When unset, the kernel's default will be
	   used.

	   Added in version 250.

       NTupleFilter=
	   Takes a boolean. If set to true, receive N-tuple filters and actions
	   are enabled. When unset, the kernel's default will be used.

	   Added in version 250.

       RxChannels=, TxChannels=, OtherChannels=, CombinedChannels=
	   Specifies the number of receive, transmit, other, or combined
	   channels, respectively. Takes an unsigned integer in the range
	   1...4294967295 or "max". If set to "max", the advertised maximum
	   value of the hardware will be used. When unset, the number will not
	   be changed. Defaults to unset.

	   Added in version 239.

       RxBufferSize=, RxMiniBufferSize=, RxJumboBufferSize=, TxBufferSize=
	   Specifies the maximum number of pending packets in the NIC receive
	   buffer, mini receive buffer, jumbo receive buffer, or transmit
	   buffer, respectively. Takes an unsigned integer in the range
	   1...4294967295 or "max". If set to "max", the advertised maximum
	   value of the hardware will be used. When unset, the number will not
	   be changed. Defaults to unset.

	   Added in versiontroff:<standard input>:2470: warning: special character 'u1F4A3' not defined
troff:<standard input>:2470: warning: special character 'u1F4A5' not defined
troff:<standard input>:2470: warning: special character 'u1F9E8' not defined
 244.

       RxFlowControl=
	   Takes a boolean. When set, enables receive flow control, also known
	   as the ethernet receive PAUSE message (generate and send ethernet
	   PAUSE frames). When unset, the kernel's default will be used.

	   Added in version 246.

       TxFlowControl=
	   Takes a boolean. When set, enables transmit flow control, also known
	   as the ethernet transmit PAUSE message (respond to received ethernet
	   PAUSE frames). When unset, the kernel's default will be used.

	   Added in version 246.

       AutoNegotiationFlowControl=
	   Takes a boolean. When set, auto negotiation enables the interface to
	   exchange state advertisements with the connected peer so that the
	   two devices can agree on the ethernet PAUSE configuration. When
	   unset, the kernel's default will be used.

	   Added in version 246.

       GenericSegmentOffloadMaxBytes=
	   Specifies the maximum size of a Generic Segment Offload (GSO) packet
	   the device should accept. The usual suffixes K, M, G are supported
	   and are understood to the base of 1024. An unsigned integer in the
	   range 1...65536. Defaults to unset.

	   Added in version 248.

       GenericSegmentOffloadMaxSegments=
	   Specifies the maximum number of Generic Segment Offload (GSO)
	   segments the device should accept. An unsigned integer in the range
	   1...65535. Defaults to unset.

	   Added in version 248.

       UseAdaptiveRxCoalesce=, UseAdaptiveTxCoalesce=
	   Boolean properties that, when set, enable/disable adaptive Rx/Tx
	   coalescing if the hardware supports it. When unset, the kernel's
	   default will be used.

	   Added in version 250.

       RxCoalesceSec=, RxCoalesceIrqSec=, RxCoalesceLowSec=,
       RxCoalesceHighSec=, TxCoalesceSec=, TxCoalesceIrqSec=,
       TxCoalesceLowSec=, TxCoalesceHighSec=
	   These properties configure the delay before Rx/Tx interrupts are
	   generated after a packet is sent/received. The "Irq" properties come
	   into effect when the host is servicing an IRQ. The "Low" and "High"
	   properties come into effect when the packet rate drops below the low
	   packet rate threshold or exceeds the high packet rate threshold
	   respectively if adaptive Rx/Tx coalescing is enabled. When unset,
	   the kernel's defaults will be used.

	   Added in version 250.

       RxMaxCoalescedFrames=, RxMaxCoalescedIrqFrames=,
       RxMaxCoalescedLowFrames=, RxMaxCoalescedHighFrames=,
       TxMaxCoalescedFrames=, TxMaxCoalescedIrqFrames=,
       TxMaxCoalescedLowFrames=, TxMaxCoalescedHighFrames=
	   These properties configure the maximum number of frames that are
	   sent/received before a Rx/Tx interrupt is generated. The "Irq"
	   properties come into effect when the host is servicing an IRQ. The
	   "Low" and "High" properties come into effect when the packet rate
	   drops below the low packet rate threshold or exceeds the high packet
	   rate threshold respectively if adaptive Rx/Tx coalescing is enabled.
	   When unset, the kernel's defaults will be used.

	   Added in version 250.

       CoalescePacketRateLow=, CoalescePacketRateHigh=
	   These properties configure the low and high packet rate (expressed
	   in packets per second) threshold respectively and are used to
	   determine when the corresponding coalescing settings for low and
	   high packet rates come into effect if adaptive Rx/Tx coalescing is
	   enabled. If unset, the kernel's defaults will be used.

	   Added in version 250.

       CoalescePacketRateSampleIntervalSec=
	   Configures how often to sample the packet rate used for adaptive
	   Rx/Tx coalescing. This property cannot be zero. This lowest time
	   granularity supported by this property is seconds. Partial seconds
	   will be rounded up before being passed to the kernel. If unset, the
	   kernel's default will be used.

	   Added in version 250.

       StatisticsBlockCoalesceSec=
	   How long to delay driver in-memory statistics block updates. If the
	   driver does not have an in-memory statistic block, this property is
	   ignored. This property cannot be zero. If unset, the kernel's
	   default will be used.

	   Added in version 250.

       MDI=
	   Specifies the medium dependent interface (MDI) mode for the
	   interface. A MDI describes the interface from a physical layer
	   implementation to the physical medium used to carry the
	   transmission. Takes one of the following words: "straight" (or
	   equivalently: "mdi"), "crossover" (or equivalently: "mdi-x",
	   "mdix"), and "auto". When "straight", the MDI straight through mode
	   will be used. When "crossover", the MDI crossover (MDI-X) mode will
	   be used. When "auto", the MDI status is automatically detected.
	   Defaults to unset, and the kernel's default will be used.

	   Added in version 251.

       SR-IOVVirtualFunctions=
	   Specifies the number of SR-IOV virtual functions. Takes an integer
	   in the range 0...2147483647. Defaults to unset, and automatically
	   determined from the values specified in the VirtualFunction=
	   settings in the [SR-IOV] sections.

	   Added in version 251.

[SR-IOV] SECTION OPTIONS
       SR-IOV provides the ability to partition a single physical PCI resource
       into virtual PCI functions which can then be e.g. injected into a VM. In
       the case of network VFs, SR-IOV reduces latency and CPU utilisation for
       north-south network traffic (that is, traffic with endpoints outside the
       host machine), by allowing traffic to bypass the host machine's network
       stack.

       The presence of an [SR-IOV] section in a .link file will cause the
       creation and configuration of the specified virtual function. Within a
       .network file, the specified virtual function will be configured, but
       must already exist. Specify several [SR-IOV] sections to configure
       several SR-IOVs.

       The [SR-IOV] section accepts the following keys.

       VirtualFunction=
	   Specifies a Virtual Function (VF), lightweight PCIe function
	   designed solely to move data in and out. Takes an integer in the
	   range 0...2147483646. This option is compulsory.

	   Added in version 251.

       VLANId=
	   Specifies VLAN ID of the virtual function. Takes an integer in the
	   range 1...4095.

	   Added in version 251.

       QualityOfService=
	   Specifies quality of service of the virtual function. Takes an
	   integer in the range 1...4294967294.

	   Added in version 251.

       VLANProtocol=
	   Specifies VLAN protocol of the virtual function. Takes "802.1Q" or
	   "802.1ad".

	   Added in version 251.

       MACSpoofCheck=
	   Takes a boolean. Controls the MAC spoof checking. When unset, the
	   kernel's default will be used.

	   Added in version 251.

       QueryReceiveSideScaling=
	   Takes a boolean. Toggle the ability of querying the receive side
	   scaling (RSS) configuration of the virtual function (VF). The VF RSS
	   information like RSS hash key may be considered sensitive on some
	   devices where this information is shared between VF and the physical
	   function (PF). When unset, the kernel's default will be used.

	   Added in version 251.

       Trust=
	   Takes a boolean. Allows one to set trust mode of the virtual
	   function (VF). When set, VF users can set a specific feature which
	   may impact security and/or performance. When unset, the kernel's
	   default will be used.

	   Added in version 251.

       LinkState=
	   Allows one to set the link state of the virtual function (VF). Takes
	   a boolean or a special value "auto". Setting to "auto" means a
	   reflection of the physical function (PF) link state, "yes" lets the
	   VF to communicate with other VFs on this host even if the PF link
	   state is down, "no" causes the hardware to drop any packets sent by
	   the VF. When unset, the kernel's default will be used.

	   Added in version 251.

       MACAddress=
	   Specifies the MAC address for the virtual function.

	   Added in version 251.

SPECIFIERS
       Some settings resolve specifiers which may be used to write generic unit
       files referring to runtime or unit parameters that are replaced when the
       unit files are loaded. Specifiers must be known and resolvable for the
       setting to be valid. The following specifiers are understood:

       Table 2. Specifiers available in unit files
       +-----------+----------------------+------------------------+
       | Specifier | Meaning		  | Details		   |
       +-----------+----------------------+------------------------+
       | "%a"	   | Architecture	  | A short string	   |
       |	   |			  | identifying the	   |
       |	   |			  | architecture of the	   |
       |	   |			  | local system. A	   |
       |	   |			  | string such as x86,	   |
       |	   |			  | x86-64 or arm64. See   |
       |	   |			  | the architectures	   |
       |	   |			  | defined for		   |
       |	   |			  | ConditionArchitecture= |
       |	   |			  | in systemd.unit(5)	   |
       |	   |			  | for a full list.	   |
       +-----------+----------------------+------------------------+
       | "%A"	   | Operating system	  | The operating system   |
       |	   | image version	  | image version	   |
       |	   |			  | identifier of the	   |
       |	   |			  | running system, as	   |
       |	   |			  | read from the	   |
       |	   |			  | IMAGE_VERSION= field   |
       |	   |			  | of /etc/os-release. If |
       |	   |			  | not set, resolves to   |
       |	   |			  | an empty string. See   |
       |	   |			  | os-release(5) for more |
       |	   |			  | information.	   |
       +-----------+----------------------+------------------------+
       | "%b"	   | Boot ID		  | The boot ID of the	   |
       |	   |			  | running system,	   |
       |	   |			  | formatted as string.   |
       |	   |			  | See random(4) for more |
       |	   |			  | information.	   |
       +-----------+----------------------+------------------------+
       | "%B"	   | Operating system	  | The operating system   |
       |	   | build ID		  | build identifier of	   |
       |	   |			  | the running system, as |
       |	   |			  | read from the	   |
       |	   |			  | BUILD_ID= field of	   |
       |	   |			  | /etc/os-release. If	   |
       |	   |			  | not set, resolves to   |
       |	   |			  | an empty string. See   |
       |	   |			  | os-release(5) for more |
       |	   |			  | information.	   |
       +-----------+----------------------+------------------------+
       | "%H"	   | Host name		  | The hostname of the	   |
       |	   |			  | running system.	   |
       +-----------+----------------------+------------------------+
       | "%l"	   | Short host name	  | The hostname of the	   |
       |	   |			  | running system,	   |
       |	   |			  | truncated at the first |
       |	   |			  | dot to remove any	   |
       |	   |			  | domain component.	   |
       +-----------+----------------------+------------------------+
       | "%m"	   | Machine ID		  | The machine ID of the  |
       |	   |			  | running system,	   |
       |	   |			  | formatted as string.   |
       |	   |			  | See machine-id(5) for  |
       |	   |			  | more information.	   |
       +-----------+----------------------+------------------------+
       | "%M"	   | Operating system	  | The operating system   |
       |	   | image identifier	  | image identifier of	   |
       |	   |			  | the running system, as |
       |	   |			  | read from the	   |
       |	   |			  | IMAGE_ID= field of	   |
       |	   |			  | /etc/os-release. If	   |
       |	   |			  | not set, resolves to   |
       |	   |			  | an empty string. See   |
       |	   |			  | os-release(5) for more |
       |	   |			  | information.	   |
       +-----------+----------------------+------------------------+
       | "%o"	   | Operating system ID  | The operating system   |
       |	   |			  | identifier of the	   |
       |	   |			  | running system, as	   |
       |	   |			  | read from the ID=	   |
       |	   |			  | field of		   |
       |	   |			  | /etc/os-release. See   |
       |	   |			  | os-release(5) for more |
       |	   |			  | information.	   |
       +-----------+----------------------+------------------------+
       | "%q"	   | Pretty host name	  | The pretty hostname of |
       |	   |			  | the running system, as |
       |	   |			  | read from the	   |
       |	   |			  | PRETTY_HOSTNAME= field |
       |	   |			  | of /etc/machine-info.  |
       |	   |			  | If not set, resolves   |
       |	   |			  | to the short hostname. |
       |	   |			  | See machine-info(5)	   |
       |	   |			  | for more information.  |
       +-----------+----------------------+------------------------+
       | "%T"	   | Directory for	  | This is either /tmp or |
       |	   | temporary files	  | the path "$TMPDIR",	   |
       |	   |			  | "$TEMP" or "$TMP" are  |
       |	   |			  | set to. (Note that the |
       |	   |			  | directory may be	   |
       |	   |			  | specified without a	   |
       |	   |			  | trailing slash.)	   |
       +-----------+----------------------+------------------------+
       | "%v"	   | Kernel release	  | Identical to uname -r  |
       |	   |			  | output.		   |
       +-----------+----------------------+------------------------+
       | "%V"	   | Directory for larger | This is either	   |
       |	   | and persistent	  | /var/tmp or the path   |
       |	   | temporary files	  | "$TMPDIR", "$TEMP" or  |
       |	   |			  | "$TMP" are set to.	   |
       |	   |			  | (Note that the	   |
       |	   |			  | directory may be	   |
       |	   |			  | specified without a	   |
       |	   |			  | trailing slash.)	   |
       +-----------+----------------------+------------------------+
       | "%w"	   | Operating system	  | The operating system   |
       |	   | version ID		  | version identifier of  |
       |	   |			  | the running system, as |
       |	   |			  | read from the	   |
       |	   |			  | VERSION_ID= field of   |
       |	   |			  | /etc/os-release. If	   |
       |	   |			  | not set, resolves to   |
       |	   |			  | an empty string. See   |
       |	   |			  | os-release(5) for more |
       |	   |			  | information.	   |
       +-----------+----------------------+------------------------+
       | "%W"	   | Operating system	  | The operating system   |
       |	   | variant ID		  | variant identifier of  |
       |	   |			  | the running system, as |
       |	   |			  | read from the	   |
       |	   |			  | VARIANT_ID= field of   |
       |	   |			  | /etc/os-release. If	   |
       |	   |			  | not set, resolves to   |
       |	   |			  | an empty string. See   |
       |	   |			  | os-release(5) for more |
       |	   |			  | information.	   |
       +-----------+----------------------+------------------------+

EXAMPLES
       Example 1. /usr/lib/systemd/network/99-default.link

       The link file 99-default.link that is shipped with systemd defines the
       default policies for the interface name, alternative names, and MAC
       address of links.

	   [Match]
	   OriginalName=*

	   [Link]
	   NamePolicy=keep kernel database onboard slot path
	   AlternativeNamesPolicy=database onboard slot path
	   MACAddressPolicy=persistent

       Example 2. /etc/systemd/network/10-dmz.link

       This example assigns the fixed name "dmz0" to the interface with the MAC
       address 00:a0:de:63:7a:e6:

	   [Match]
	   MACAddress=00:a0:de:63:7a:e6

	   [Link]
	   Name=dmz0

       NamePolicy= is not set, so Name= takes effect. We use the "10-" prefix
       to order this file early in the list. Note that it needs to be before
       99-default.link, i.e. it needs a numerical prefix, to have any effect at
       all.

       Example 3. (Re-)applying a .link file to an interface

       After a new .link file has been created, or an existing .link file
       modified, the new settings may be applied to the matching interface with
       the following commands:

	   $ sudo udevadm control --reload
	   $ sudo ip link set eth0 down
	   $ sudo udevadm trigger --verbose --settle --action add /sys/class/net/eth0

       You may also need to stop the service that manages the network
       interface, e.g.	systemd-networkd.service(8) or NetworkManager.service
       before the above operation, and then restart the service after that. For
       more details about udevadm command, see udevadm(8).

       Example 4. Debugging NamePolicy= assignments

	   $ sudo SYSTEMD_LOG_LEVEL=debug udevadm test-builtin net_setup_link /sys/class/net/hub0
	   ...
	   Parsed configuration file /usr/lib/systemd/network/99-default.link
	   Parsed configuration file /etc/systemd/network/10-eth0.link
	   ID_NET_DRIVER=cdc_ether
	   Config file /etc/systemd/network/10-eth0.link applies to device hub0
	   link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
	   hub0: Device has name_assign_type=4
	   Using default interface naming scheme 'v240'.
	   hub0: Policies did not yield a name, using specified Name=hub0.
	   ID_NET_LINK_FILE=/etc/systemd/network/10-eth0.link
	   ID_NET_NAME=hub0
	   ...

       Explicit Name= configuration wins in this case.

	   sudo SYSTEMD_LOG_LEVEL=debug udevadm test-builtin net_setup_link /sys/class/net/enp0s31f6
	   ...
	   Parsed configuration file /usr/lib/systemd/network/99-default.link
	   Parsed configuration file /etc/systemd/network/10-eth0.link
	   Created link configuration context.
	   ID_NET_DRIVER=e1000e
	   Config file /usr/lib/systemd/network/99-default.link applies to device enp0s31f6
	   link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
	   enp0s31f6: Device has name_assign_type=4
	   Using default interface naming scheme 'v240'.
	   enp0s31f6: Policy *keep*: keeping existing userspace name
	   enp0s31f6: Device has addr_assign_type=0
	   enp0s31f6: MAC on the device already matches policy *persistent*
	   ID_NET_LINK_FILE=/usr/lib/systemd/network/99-default.link
	   ...

       In this case, the interface was already renamed, so the keep policy
       specified as the first option in 99-default.link means that the existing
       name is preserved. If keep was removed, or if were in boot before the
       renaming has happened, we might get the following instead:

	   enp0s31f6: Policy *path* yields "enp0s31f6".
	   enp0s31f6: Device has addr_assign_type=0
	   enp0s31f6: MAC on the device already matches policy *persistent*
	   ID_NET_LINK_FILE=/usr/lib/systemd/network/99-default.link
	   ID_NET_NAME=enp0s31f6
	   ...

       Please note that the details of output are subject to change.

       Example 5. /etc/systemd/network/10-internet.link

       This example assigns the fixed name "internet0" to the interface with
       the device path "pci-0000:00:1a.0-*":

	   [Match]
	   Path=pci-0000:00:1a.0-*

	   [Link]
	   Name=internet0

       Example 6. /etc/systemd/network/25-wireless.link

       Here's an overly complex example that shows the use of a large number of
       [Match] and [Link] settings.

	   [Match]
	   MACAddress=12:34:56:78:9a:bc
	   Driver=brcmsmac
	   Path=pci-0000:02:00.0-*
	   Type=wlan
	   Virtualization=no
	   Host=my-laptop
	   Architecture=x86-64

	   [Link]
	   Name=wireless0
	   MTUBytes=1450
	   BitsPerSecond=10M
	   WakeOnLan=magic
	   MACAddress=cb:a9:87:65:43:21

SEE ALSO
       systemd-udevd.service(8), udevadm(8), systemd.netdev(5),
       systemd.network(5), systemd-network-generator.service(8)

NOTES
	1.  Please note that those configuration files must be available at all
	   times.  If  /usr/local/  is	a  separate  partition,	 it  may not be
	   available during early boot, and must not be used for configuration.

	2. System and Service Credentials
	   https://systemd.io/CREDENTIALS

systemd 257.13							SYSTEMD.LINK(5)