search..
No manual entry for -- in section 4
sd(4)			    Kernel Interfaces Manual			  sd(4)

NAME
       sd - driver for SCSI disk drives

SYNOPSIS
       #include <linux/hdreg.h>	       /* for HDIO_GETGEO */
       #include <linux/fs.h>	       /* for BLKGETSIZE and BLKRRPART */

CONFIGURATION
       The  block device name has the following form: sdlp, where l is a letter
       denoting the physical drive, and p is a number denoting the partition on
       that physical drive.  Often, the partition number, p, will be  left  off
       when the device corresponds to the whole drive.

       SCSI disks have a major device number of 8, and a minor device number of
       the  form  (16 * drive_number) + partition_number, where drive_number is
       the number of the physical drive	 in  order  of	detection,  and	 parti-
       tion_number is as follows:

       o  partition 0 is the whole drive

       o  partitions 1-4 are the DOS "primary" partitions

       o  partitions 5-8 are the DOS "extended" (or "logical") partitions

       For  example, /dev/sda will have major 8, minor 0, and will refer to all
       of the first SCSI drive in the system; and /dev/sdb3 will have major  8,
       minor  19,  and	will  refer to the third DOS "primary" partition on the
       second SCSI drive in the system.

       At this time, only block devices are provided.  Raw devices have not yet
       been implemented.

DESCRIPTION
       The following ioctls are provided:

       HDIO_GETGEO
	      Returns the BIOS disk parameters in the following structure:

	   struct hd_geometry {
	       unsigned char  heads;
	       unsigned char  sectors;
	       unsigned short cylinders;
	       unsigned long  start;
	   };

	      A pointer to this structure is passed as the ioctl(2) parameter.

	      The information returned in the parameter is the disk geometry of
	      the drive as understood by DOS!  This geometry is not the	 physi-
	      cal  geometry  of	 the  drive.   It is used when constructing the
	      drive's partition table, however, and is	needed	for  convenient
	      operation	 of  fdisk(1), efdisk(1), and lilo(1).	If the geometry
	      information is not available, zero will be returned  for	all  of
	      the parameters.

       BLKGETSIZE
	      Returns  the  device  size  in  sectors.	 The ioctl(2) parameter
	      should be a pointer to a long.

       BLKRRPART
	      Forces a reread of the SCSI disk partition tables.  No  parameter
	      is needed.

	      The SCSI ioctl(2) operations are also supported.	If the ioctl(2)
	      parameter	 is  required, and it is NULL, then ioctl(2) fails with
	      the error EINVAL.

FILES
       /dev/sd[a-h]
	      the whole device

       /dev/sd[a-h][0-8]
	      individual block partitions

Linux man-pages 6.9.1		   2024-05-02				  sd(4)