search..
No manual entry for -- in section 3
tzset(3)		    Library Functions Manual		       tzset(3)

NAME
       tzset,  tzname, timezone, daylight - initialize time conversion informa-
       tion

LIBRARY
       Standard C library (libc, -lc)

SYNOPSIS
       #include <time.h>

       void tzset(void);

       extern char *tzname[2];
       extern long timezone;
       extern int daylight;

   Feature Test Macro Requirements for glibc (see feature_test_macros(7)):

       tzset():
	   _POSIX_C_SOURCE

       tzname:
	   _POSIX_C_SOURCE

       timezone, daylight:
	   _XOPEN_SOURCE
	       || /* glibc >= 2.19: */ _DEFAULT_SOURCE
	       || /* glibc <= 2.19: */ _SVID_SOURCE

DESCRIPTION
       The tzset() function initializes the tzname variable from the  TZ  envi-
       ronment	variable.   This  function is automatically called by the other
       time conversion functions that depend on the timezone.  In  a  System-V-
       like  environment, it will also set the variables timezone (seconds West
       of UTC) and daylight (to 0 if this timezone does not have  any  daylight
       saving  time  rules, or to nonzero if there is a time, past, present, or
       future when daylight saving time applies).

       The tzset() function initializes these variables to  unspecified	 values
       if this timezone is a geographical timezone like "America/New_York" (see
       below).

       If  the TZ variable does not appear in the environment, the system time-
       zone is used.  The system timezone is configured by copying, or linking,
       a file in the tzfile(5) format to /etc/localtime.  A  timezone  database
       of  these files may be located in the system timezone directory (see the
       FILES section below).

       If the TZ variable does appear in the  environment,  but	 its  value  is
       empty, or its value cannot be interpreted using any of the formats spec-
       ified below, then Coordinated Universal Time (UTC) is used.

       A nonempty value of TZ can be one of two formats, either of which can be
       preceded	 by  a colon which is ignored.	The first format is a string of
       characters that directly represent the timezone to be used:

	   std offset[dst[offset][,start[/time],end[/time]]]

       There are no spaces in the specification.  The std string  specifies  an
       abbreviation for the timezone and must be three or more alphabetic char-
       acters.	 When  enclosed	 between the less-than (<) and greater-than (>)
       signs, the character set is expanded to include the plus (+)  sign,  the
       minus  (-)  sign, and digits.  The offset string immediately follows std
       and specifies the time value to be added to the local time to get  Coor-
       dinated Universal Time (UTC).  The offset is positive if the local time-
       zone is west of the Prime Meridian and negative if it is east.  The hour
       must be between 0 and 24, and the minutes and seconds 00 and 59:

	   [+|-]hh[:mm[:ss]]

       The  dst	 string	 and  offset specify the name and offset for the corre-
       sponding daylight saving timezone.  If the offset  is  omitted,	it  de-
       faults to one hour ahead of standard time.

       The start field specifies when daylight saving time goes into effect and
       the  end	 field specifies when the change is made back to standard time.
       These fields may have the following formats:

       Jn     This specifies the Julian day with n between  1  and  365.   Leap
	      days  are not counted.  In this format, February 29 can't be rep-
	      resented; February 28 is day 59, and March 1 is always day 60.

       n      This specifies the zero-based Julian day with  n	between	 0  and
	      365.  February 29 is counted in leap years.

       Mm.w.d This  specifies  day  d  (0 <= d <= 6) of week w (1 <= w <= 5) of
	      month m (1 <= m <= 12).  Week 1 is the first week in which day  d
	      occurs  and week 5 is the last week in which day d occurs.  Day 0
	      is a Sunday.

       The time fields specify when, in the local time currently in effect, the
       change to the other time occurs.	 They use the same format as offset ex-
       cept that the hour can be in the range [-167, 167]  to  represent  times
       before and after the named day.	If omitted, the default is 02:00:00.

       Here is an example for New Zealand, where the standard time (NZST) is 12
       hours  ahead  of UTC, and daylight saving time (NZDT), 13 hours ahead of
       UTC, runs from September's last Sunday, at the default time 02:00:00, to
       April's first Sunday at 03:00:00.

	   TZ="NZST-12:00:00NZDT-13:00:00,M9.5.0,M4.1.0/3"

       The second --or "geographical"-- format specifies that the timezone  in-
       formation should be read from a file:

	   filespec

       The  filespec specifies a tzfile(5)-format file to read the timezone in-
       formation from.	If filespec does not begin with a '/', the file	 speci-
       fication is relative to the system timezone directory.  If the specified
       file  cannot be read or interpreted, Coordinated Universal Time (UTC) is
       used; however, applications should not depend on random filespec	 values
       standing for UTC, as TZ formats may be extended in the future.

       Here's an example, once more for New Zealand:

	   TZ="Pacific/Auckland"

ENVIRONMENT
       TZ     If  this variable is set its value takes precedence over the sys-
	      tem configured timezone.

       TZDIR  If this variable is set its value takes precedence over the  sys-
	      tem configured timezone database directory path.

FILES
       /etc/localtime
	      The system timezone file.

       /usr/share/zoneinfo/
	      The system timezone database directory.

       /usr/share/zoneinfo/posixrules
	      When a TZ string includes a dst timezone without anything follow-
	      ing it, then this file is used for the start/end rules.  It is in
	      the  tzfile(5)  format.	By  default, the zoneinfo Makefile hard
	      links it to the America/New_York tzfile.

       Above are the current standard file locations, but they are configurable
       when glibc is compiled.

ATTRIBUTES
       For an explanation of the terms used in this section, see attributes(7).
       +---------------------------------+---------------+--------------------+
       | Interface			 | Attribute	 | Value	      |
       +---------------------------------+---------------+--------------------+
       | tzset()			 | Thread safety | MT-Safe env locale |
       +---------------------------------+---------------+--------------------+

STANDARDS
       POSIX.1-2024.

HISTORY
       tzset()
       tzname POSIX.1-1988, SVr4, 4.3BSD.

       timezone
       daylight
	      POSIX.1-2001 (XSI), SVr4, 4.3BSD.

       4.3BSD had a function char *timezone(zone, dst) that returned  the  name
       of  the	timezone  corresponding	 to its first argument (minutes West of
       UTC).  If the second argument was 0, the standard name was used,	 other-
       wise the daylight saving time version.

CAVEATS
       Because	the values of tzname, timezone, and daylight are often unspeci-
       fied, and accessing them can lead to undefined behavior in multithreaded
       applications, code should instead obtain time zone offset and  abbrevia-
       tions  from  the	 tm_gmtoff  and tm_zone members of the broken-down time
       structure tm(3type).

SEE ALSO
       date(1), gettimeofday(2), time(2), ctime(3), getenv(3), tzfile(5)

Linux man-pages 6.9.1		   2024-06-12			       tzset(3)