search..
No manual entry for -- in section 3
PCRE2SYNTAX(3)		    Library Functions Manual		 PCRE2SYNTAX(3)

NAME
       PCRE2 - Perl-compatible regular expressions (revised API)

PCRE2 REGULAR EXPRESSION SYNTAX SUMMARY

       The  full  syntax  and semantics of the regular expression patterns that
       are supported by PCRE2 are described in the pcre2pattern	 documentation.
       This  document  contains a quick-reference summary of the pattern syntax
       followed by the syntax of replacement strings in substitution  function.
       The full description of the latter is in the pcre2api documentation.

QUOTING

	 \x	    where x is non-alphanumeric is a literal x
	 \Q...\E    treat enclosed characters as literal

       Note  that white space inside \Q...\E is always treated as literal, even
       if PCRE2_EXTENDED is set, causing most other white space to be  ignored.
       Note  also  that	 PCRE2's  handling of \Q...\E has some differences from
       Perl's. See the pcre2pattern documentation for details.

BRACED ITEMS

       With one exception, wherever brace characters { and }  are  required  to
       enclose	data  for constructions such as \g{2} or \k{name}, space and/or
       horizontal tab characters that follow { or precede } are allowed and are
       ignored. In the case of quantifiers, they may also appear before or  af-
       ter the comma. The exception is \u{...} which is not Perl-compatible and
       is  recognized  only  when  PCRE2_EXTRA_ALT_BSUX	 is set. This is an EC-
       MAScript compatibility feature, and follows ECMAScript's behaviour.

ESCAPED CHARACTERS

       This table applies to ASCII and Unicode	environments.  An  unrecognized
       escape sequence causes an error.

	 \a	    alarm, that is, the BEL character (hex 07)
	 \cx	    "control-x", where x is a non-control ASCII character
	 \e	    escape (hex 1B)
	 \f	    form feed (hex 0C)
	 \n	    newline (hex 0A)
	 \r	    carriage return (hex 0D)
	 \t	    tab (hex 09)
	 \0dd	    character with octal code 0dd
	 \ddd	    character with octal code ddd, or backreference
	 \o{ddd..}  character with octal code ddd..
	 \N{U+hh..} character with Unicode code point hh.. (Unicode mode only)
	 \xhh	    character with hex code hh
	 \x{hh..}   character with hex code hh..

       \N{U+hh..}  is synonymous with \x{hh..} but is not supported in environ-
       ments that use EBCDIC code (mainly IBM mainframes).  Note  that	\N  not
       followed	 by  an	 opening curly bracket has a different meaning (see be-
       low).

       If PCRE2_ALT_BSUX or PCRE2_EXTRA_ALT_BSUX is set ("ALT_BSUX mode"),  the
       following are also recognized:

	 \U	    the character "U"
	 \uhhhh	    character with hex code hhhh
	 \u{hh..}   character with hex code hh.. but only for EXTRA_ALT_BSUX

       When  \x	 is  not followed by {, one or two hexadecimal digits are read,
       but in ALT_BSUX mode \x must be followed by two hexadecimal digits to be
       recognized as a hexadecimal escape; otherwise it matches a literal  "x".
       Likewise,  if  \u (in ALT_BSUX mode) is not followed by four hexadecimal
       digits or (in EXTRA_ALT_BSUX mode) a sequence of	 hex  digits  in  curly
       brackets, it matches a literal "u".

       Note  that \0dd is always an octal code. The treatment of backslash fol-
       lowed by a non-zero digit is complicated; for details  see  the	section
       "Non-printing  characters"  in the pcre2pattern documentation, where de-
       tails of escape processing in EBCDIC environments are also given.

CHARACTER TYPES

	 .	    any character except newline;
		      in dotall mode, any character whatsoever
	 \C	    one code unit, even in UTF mode (best avoided)
	 \d	    a decimal digit
	 \D	    a character that is not a decimal digit
	 \h	    a horizontal white space character
	 \H	    a character that is not a horizontal white space character
	 \N	    a character that is not a newline
	 \p{xx}	    a character with the xx property
	 \P{xx}	    a character without the xx property
	 \R	    a newline sequence
	 \s	    a white space character
	 \S	    a character that is not a white space character
	 \v	    a vertical white space character
	 \V	    a character that is not a vertical white space character
	 \w	    a "word" character
	 \W	    a "non-word" character
	 \X	    a Unicode extended grapheme cluster

       \C is dangerous because it may leave the current matching point	in  the
       middle  of a UTF-8 or UTF-16 character. The application can lock out the
       use of \C by setting the PCRE2_NEVER_BACKSLASH_C option. It is also pos-
       sible to build PCRE2 with the use of \C permanently disabled.

       By default, \d, \s, and \w match only ASCII characters,	even  in  UTF-8
       mode  or in the 16-bit and 32-bit libraries. However, if locale-specific
       matching is happening, \s and \w may also  match	 characters  with  code
       points  in the range 128-255. If the PCRE2_UCP option is set, the behav-
       iour of these escape sequences is changed to use Unicode properties  and
       they match many more characters, but there are some option settings that
       can restrict individual sequences to matching only ASCII characters.

       Property	 descriptions in \p and \P are matched caselessly; hyphens, un-
       derscores, and ASCII white space characters are ignored,	 in  accordance
       with Unicode's "loose matching" rules. For example, \p{Bidi_Class=al} is
       the same as \p{ bidi class = AL }.

GENERAL CATEGORY PROPERTIES FOR \p and \P

	 C	    Other
	 Cc	    Control
	 Cf	    Format
	 Cn	    Unassigned
	 Co	    Private use
	 Cs	    Surrogate

	 L	    Letter
	 Lc	    Cased letter, the union of Ll, Lu, and Lt
	 L&	    Synonym of Lc
	 Ll	    Lower case letter
	 Lm	    Modifier letter
	 Lo	    Other letter
	 Lt	    Title case letter
	 Lu	    Upper case letter

	 M	    Mark
	 Mc	    Spacing mark
	 Me	    Enclosing mark
	 Mn	    Non-spacing mark

	 N	    Number
	 Nd	    Decimal number
	 Nl	    Letter number
	 No	    Other number

	 P	    Punctuation
	 Pc	    Connector punctuation
	 Pd	    Dash punctuation
	 Pe	    Close punctuation
	 Pf	    Final punctuation
	 Pi	    Initial punctuation
	 Po	    Other punctuation
	 Ps	    Open punctuation

	 S	    Symbol
	 Sc	    Currency symbol
	 Sk	    Modifier symbol
	 Sm	    Mathematical symbol
	 So	    Other symbol

	 Z	    Separator
	 Zl	    Line separator
	 Zp	    Paragraph separator
	 Zs	    Space separator

       From  release  10.45,  when caseless matching is set, Ll, Lu, and Lt are
       all equivalent to Lc.

PCRE2 SPECIAL CATEGORY PROPERTIES FOR \p and \P

	 Xan	    Alphanumeric: union of properties L and N
	 Xps	    POSIX space: property Z or tab, NL, VT, FF, CR
	 Xsp	    Perl space: property Z or tab, NL, VT, FF, CR
	 Xuc	    Universally-named character: one that can be
		      represented by a Universal Character Name
	 Xwd	    Perl word: property Xan or underscore

       Perl and POSIX space are now the same. Perl added VT to its space  char-
       acter set at release 5.18.

BINARY PROPERTIES FOR \p AND \P

       Unicode defines a number of binary properties, that is, properties whose
       only  values  are true or false. You can obtain a list of those that are
       recognized by \p and \P, along with their abbreviations, by running this
       command:

	 pcre2test -LP

SCRIPT MATCHING WITH \p AND \P

       Many script names and their 4-letter  abbreviations  are	 recognized  in
       \p{sc:...} or \p{scx:...} items, or on their own with \p (and also \P of
       course). You can obtain a list of these scripts by running this command:

	 pcre2test -LS

THE BIDI_CLASS PROPERTY FOR \p AND \P

	 \p{Bidi_Class:<class>}	  matches a character with the given class
	 \p{BC:<class>}		  matches a character with the given class

       The recognized classes are:

	 AL	     Arabic letter
	 AN	     Arabic number
	 B	     paragraph separator
	 BN	     boundary neutral
	 CS	     common separator
	 EN	     European number
	 ES	     European separator
	 ET	     European terminator
	 FSI	     first strong isolate
	 L	     left-to-right
	 LRE	     left-to-right embedding
	 LRI	     left-to-right isolate
	 LRO	     left-to-right override
	 NSM	     non-spacing mark
	 ON	     other neutral
	 PDF	     pop directional format
	 PDI	     pop directional isolate
	 R	     right-to-left
	 RLE	     right-to-left embedding
	 RLI	     right-to-left isolate
	 RLO	     right-to-left override
	 S	     segment separator
	 WS	     white space

CHARACTER CLASSES

	 [...]	     positive character class
	 [^...]	     negative character class
	 [x-y]	     range (can be used for hex characters)
	 [[:xxx:]]   positive POSIX named set
	 [[:^xxx:]]  negative POSIX named set

	 alnum	     alphanumeric
	 alpha	     alphabetic
	 ascii	     0-127
	 blank	     space or tab
	 cntrl	     control character
	 digit	     decimal digit
	 graph	     printing, excluding space
	 lower	     lower case letter
	 print	     printing, including space
	 punct	     printing, excluding alphanumeric
	 space	     white space
	 upper	     upper case letter
	 word	     same as \w
	 xdigit	     hexadecimal digit

       In  PCRE2,  POSIX character set names recognize only ASCII characters by
       default, but some of them use Unicode properties if  PCRE2_UCP  is  set.
       You can use \Q...\E inside a character class.

       When  PCRE2_ALT_EXTENDED_CLASS is set, UTS#18 extended character classes
       may be used, allowing nested character classes, combined using set oper-
       ators.

	 [x&&[^y]]   UTS#18 extended character class

	 x||y	     set union (OR)
	 x&&y	     set intersection (AND)
	 x--y	     set difference (AND NOT)
	 x~~y	     set symmetric difference (XOR)

PERL EXTENDED CHARACTER CLASSES

	 (?[...])		 Perl extended character class
	 (?[\p{Thai} & \p{Nd}])	 operators; whitespace ignored
	 (?[(x - y) & z])	 parentheses for grouping

	 (?[ [^3] & \p{Nd} ])	 [...] is a nested ordinary class
	 (?[ [:alpha:] - [z] ])	 POSIX set is allowed outside [...]
	 (?[ \d - [3] ])	 backslash-escaped set is allowed outside [...]
	 (?[ !\n & [:ascii:] ])	 backslash-escaped character is allowed outside
       [...]
			     all other characters or ranges must be enclosed in
       [...]

	 x|y, x+y		 set union (OR)
	 x&y			 set intersection (AND)
	 x-y			 set difference (AND NOT)
	 x^y			 set symmetric difference (XOR)
	 !x			 set complement (NOT)

       Inside a Perl extended character class, [...] switches mode to be inter-
       preted as an ordinary character class. Outside of a  nested  [...],  the
       only  items  permitted are backslash-escapes, POSIX sets, operators, and
       parentheses. Inside a nested ordinary class, ^  has  its	 usual	meaning
       (inverts	 the  class  when  used	 as  the first character); outside of a
       nested class, ^ is the XOR operator.

QUANTIFIERS

	 ?	     0 or 1, greedy
	 ?+	     0 or 1, possessive
	 ??	     0 or 1, lazy
	 *	     0 or more, greedy
	 *+	     0 or more, possessive
	 *?	     0 or more, lazy
	 +	     1 or more, greedy
	 ++	     1 or more, possessive
	 +?	     1 or more, lazy
	 {n}	     exactly n
	 {n,m}	     at least n, no more than m, greedy
	 {n,m}+	     at least n, no more than m, possessive
	 {n,m}?	     at least n, no more than m, lazy
	 {n,}	     n or more, greedy
	 {n,}+	     n or more, possessive
	 {n,}?	     n or more, lazy
	 {,m}	     zero up to m, greedy
	 {,m}+	     zero up to m, possessive
	 {,m}?	     zero up to m, lazy

ANCHORS AND SIMPLE ASSERTIONS

	 \b	     word boundary
	 \B	     not a word boundary
	 ^	     start of subject
		       also after an internal newline in multiline mode
		       (after any newline if PCRE2_ALT_CIRCUMFLEX is set)
	 \A	     start of subject
	 $	     end of subject
		       also before newline at end of subject
		       also before internal newline in multiline mode
	 \Z	     end of subject
		       also before newline at end of subject
	 \z	     end of subject
	 \G	     first matching position in subject

REPORTED MATCH POINT SETTING

	 \K	     set reported start of match

       From release 10.38 \K is not permitted by default in  lookaround	 asser-
       tions,  for  compatibility  with	 Perl.	However, if the PCRE2_EXTRA_AL-
       LOW_LOOKAROUND_BSK option is set, the previous behaviour is  re-enabled.
       When  this option is set, \K is honoured in positive assertions, but ig-
       nored in negative ones.

ALTERNATION

	 expr|expr|expr...

CAPTURING

	 (...)		 capture group
	 (?<name>...)	 named capture group (Perl)
	 (?'name'...)	 named capture group (Perl)
	 (?P<name>...)	 named capture group (Python)
	 (?:...)	 non-capture group
	 (?|...)	 non-capture group; reset group numbers for
			  capture groups in each alternative

       In non-UTF modes, names may contain underscores and  ASCII  letters  and
       digits; in UTF modes, any Unicode letters and Unicode decimal digits are
       permitted. In both cases, a name must not start with a digit.

ATOMIC GROUPS

	 (?>...)	 atomic non-capture group
	 (*atomic:...)	 atomic non-capture group

COMMENT

	 (?#....)	 comment (not nestable)

OPTION SETTING
       Changes	of  these options within a group are automatically cancelled at
       the end of the group.

	 (?a)		 all ASCII options
	 (?aD)		 restrict \d to ASCII in UCP mode
	 (?aS)		 restrict \s to ASCII in UCP mode
	 (?aW)		 restrict \w to ASCII in UCP mode
	 (?aP)		 restrict all POSIX classes to ASCII in UCP mode
	 (?aT)		 restrict POSIX digit classes to ASCII in UCP mode
	 (?i)		 caseless
	 (?J)		 allow duplicate named groups
	 (?m)		 multiline
	 (?n)		 no auto capture
	 (?r)		 restrict caseless to either ASCII or non-ASCII
	 (?s)		 single line (dotall)
	 (?U)		 default ungreedy (lazy)
	 (?x)		 ignore white space except in classes or \Q...\E
	 (?xx)		 as (?x) but also ignore space and tab in classes
	 (?-...)	 unset the given option(s)
	 (?^)		 unset imnrsx options

       (?aP) implies (?aT) as well, though this has no additional effect.  How-
       ever,  it  means	 that (?-aP) also implies (?-aT) and disables all ASCII
       restrictions for POSIX classes.

       Unsetting x or xx unsets both. Several options may be set at once, and a
       mixture of setting and unsetting such as (?i-x) is  allowed,  but  there
       may  be only one hyphen. Setting (but no unsetting) is allowed after (?^
       for example (?^in). An option setting may appear at the start of a  non-
       capture group, for example (?i:...).

       The  following are recognized only at the very start of a pattern or af-
       ter one of the newline or \R sequences or options with  similar	syntax.
       More  than  one	of them may appear. For the first three, d is a decimal
       number.

	 (*LIMIT_DEPTH=d)     set the backtracking limit to d
	 (*LIMIT_HEAP=d)      set the heap size limit to d * 1024 bytes
	 (*LIMIT_MATCH=d)     set the match limit to d
	 (*CASELESS_RESTRICT) set PCRE2_EXTRA_CASELESS_RESTRICT when matching
	 (*NOTEMPTY)	      set PCRE2_NOTEMPTY when matching
	 (*NOTEMPTY_ATSTART)  set PCRE2_NOTEMPTY_ATSTART when matching
	 (*NO_AUTO_POSSESS)   no auto-possessification (PCRE2_NO_AUTO_POSSESS)
	 (*NO_DOTSTAR_ANCHOR) no .* anchoring (PCRE2_NO_DOTSTAR_ANCHOR)
	 (*NO_JIT)	      disable JIT optimization
	 (*NO_START_OPT)      no start-match optimization (PCRE2_NO_START_OPTI-
       MIZE)
	 (*TURKISH_CASING)    set PCRE2_EXTRA_TURKISH_CASING when matching
	 (*UTF)		      set appropriate UTF mode for the library in use
	 (*UCP)		      set PCRE2_UCP (use Unicode properties for \d etc)

       Note that LIMIT_DEPTH, LIMIT_HEAP, and LIMIT_MATCH can only  reduce  the
       value   of   the	  limits   set	 by  the  caller  of  pcre2_match()  or
       pcre2_dfa_match(), not increase them.  LIMIT_RECURSION  is  an  obsolete
       synonym	for LIMIT_DEPTH. The application can lock out the use of (*UTF)
       and (*UCP) by setting the PCRE2_NEVER_UTF  or  PCRE2_NEVER_UCP  options,
       respectively, at compile time.

NEWLINE CONVENTION

       These  are recognized only at the very start of the pattern or after op-
       tion settings with a similar syntax.

	 (*CR)		 carriage return only
	 (*LF)		 linefeed only
	 (*CRLF)	 carriage return followed by linefeed
	 (*ANYCRLF)	 all three of the above
	 (*ANY)		 any Unicode newline sequence
	 (*NUL)		 the NUL character (binary zero)

WHAT \R MATCHES

       These are recognized only at the very start of the pattern or after  op-
       tion setting with a similar syntax.

	 (*BSR_ANYCRLF)	 CR, LF, or CRLF
	 (*BSR_UNICODE)	 any Unicode newline sequence

LOOKAHEAD AND LOOKBEHIND ASSERTIONS

	 (?=...)		     )
	 (*pla:...)		     ) positive lookahead
	 (*positive_lookahead:...)   )

	 (?!...)		     )
	 (*nla:...)		     ) negative lookahead
	 (*negative_lookahead:...)   )

	 (?<=...)		     )
	 (*plb:...)		     ) positive lookbehind
	 (*positive_lookbehind:...)  )

	 (?<!...)		     )
	 (*nlb:...)		     ) negative lookbehind
	 (*negative_lookbehind:...)  )

       Each  top-level	branch of a lookbehind must have a limit for the number
       of characters it matches. If any branch can match a variable  number  of
       characters, the maximum for each branch is limited to a value set by the
       caller of pcre2_compile() or defaulted. The default is set when PCRE2 is
       built  (ultimate default 255). If every branch matches a fixed number of
       characters, the limit for each branch is 65535 characters.

NON-ATOMIC LOOKAROUND ASSERTIONS

       These assertions are specific to PCRE2 and are not Perl-compatible.

	 (?*...)				)
	 (*napla:...)				) synonyms
	 (*non_atomic_positive_lookahead:...)	)

	 (?<*...)				)
	 (*naplb:...)				) synonyms
	 (*non_atomic_positive_lookbehind:...)	)

SUBSTRING SCAN ASSERTION
       This feature is not Perl-compatible.

	 (*scan_substring:(grouplist)...)  scan captured substring
	 (*scs:(grouplist)...)		   scan captured substring

       The comma-separated list may identify groups in	any  of	 the  following
       ways:

	 n	 absolute reference
	 +n	 relative reference
	 -n	 relative reference
	 <name>	 name
	 'name'	 name

SCRIPT RUNS

	 (*script_run:...)	     ) script run, can be backtracked into
	 (*sr:...)		     )

	 (*atomic_script_run:...)    ) atomic script run
	 (*asr:...)		     )

BACKREFERENCES

	 \n		 reference by number (can be ambiguous)
	 \gn		 reference by number
	 \g{n}		 reference by number
	 \g+n		 relative reference by number (PCRE2 extension)
	 \g-n		 relative reference by number
	 \g{+n}		 relative reference by number (PCRE2 extension)
	 \g{-n}		 relative reference by number
	 \k<name>	 reference by name (Perl)
	 \k'name'	 reference by name (Perl)
	 \g{name}	 reference by name (Perl)
	 \k{name}	 reference by name (.NET)
	 (?P=name)	 reference by name (Python)

SUBROUTINE REFERENCES (POSSIBLY RECURSIVE)

	 (?R)		 recurse whole pattern
	 (?n)		 call subroutine by absolute number
	 (?+n)		 call subroutine by relative number
	 (?-n)		 call subroutine by relative number
	 (?&name)	 call subroutine by name (Perl)
	 (?P>name)	 call subroutine by name (Python)
	 \g<name>	 call subroutine by name (Oniguruma)
	 \g'name'	 call subroutine by name (Oniguruma)
	 \g<n>		 call subroutine by absolute number (Oniguruma)
	 \g'n'		 call subroutine by absolute number (Oniguruma)
	 \g<+n>		 call subroutine by relative number (PCRE2 extension)
	 \g'+n'		 call subroutine by relative number (PCRE2 extension)
	 \g<-n>		 call subroutine by relative number (PCRE2 extension)
	 \g'-n'		 call subroutine by relative number (PCRE2 extension)

CONDITIONAL PATTERNS

	 (?(condition)yes-pattern)
	 (?(condition)yes-pattern|no-pattern)

	 (?(n)		     absolute reference condition
	 (?(+n)		     relative reference condition (PCRE2 extension)
	 (?(-n)		     relative reference condition (PCRE2 extension)
	 (?(<name>)	     named reference condition (Perl)
	 (?('name')	     named reference condition (Perl)
	 (?(name)	     named reference condition (PCRE2, deprecated)
	 (?(R)		     overall recursion condition
	 (?(Rn)		     specific numbered group recursion condition
	 (?(R&name)	     specific named group recursion condition
	 (?(DEFINE)	     define groups for reference
	 (?(VERSION[>]=n.m)  test PCRE2 version
	 (?(assert)	     assertion condition

       Note  the  ambiguity  of (?(R) and (?(Rn) which might be named reference
       conditions or recursion tests. Such a condition is interpreted as a ref-
       erence condition if the relevant named group exists.

BACKTRACKING CONTROL

       All backtracking control verbs may be  in  the  form  (*VERB:NAME).  For
       (*MARK)	the  name  is mandatory, for the others it is optional. (*SKIP)
       changes its behaviour if :NAME is present. The others just  set	a  name
       for  passing back to the caller, but this is not a name that (*SKIP) can
       see. The following act immediately they are reached:

	 (*ACCEPT)	 force successful match
	 (*FAIL)	 force backtrack; synonym (*F)
	 (*MARK:NAME)	 set name to be passed back; synonym (*:NAME)

       The following act only when a subsequent match failure  causes  a  back-
       track  to reach them. They all force a match failure, but they differ in
       what happens afterwards. Those that advance the start-of-match point  do
       so only if the pattern is not anchored.

	 (*COMMIT)	 overall failure, no advance of starting point
	 (*PRUNE)	 advance to next starting character
	 (*SKIP)	 advance to current matching position
	 (*SKIP:NAME)	 advance to position corresponding to an earlier
			 (*MARK:NAME); if not found, the (*SKIP) is ignored
	 (*THEN)	 local failure, backtrack to next alternation

       The  effect  of	one of these verbs in a group called as a subroutine is
       confined to the subroutine call.

CALLOUTS

	 (?C)		 callout (assumed number 0)
	 (?Cn)		 callout with numerical data n
	 (?C"text")	 callout with string data

       The allowed string delimiters are ` ' " ^ % # $ (which are the same  for
       the  start  and	the end), and the starting delimiter { matched with the
       ending delimiter }. To encode the ending delimiter  within  the	string,
       double it.

REPLACEMENT STRINGS

       If  the PCRE2_SUBSTITUTE_LITERAL option is set, a replacement string for
       pcre2_substitute() is not interpreted. Otherwise, by default,  the  only
       special character is the dollar character in one of the following forms:

	 $$		     insert a dollar character
	 $n or ${n}	     insert the contents of group n
	 $<name>	     insert the contents of named group
	 $0 or $&	     insert the entire matched substring
	 $`		     insert the substring that precedes the match
	 $'		     insert the substring that follows the match
	 $_		     insert the entire input string
	 $*MARK or ${*MARK}  insert a control verb name

       For  ${n},  n can be a name or a number. If PCRE2_SUBSTITUTE_EXTENDED is
       set, there is additional interpretation:

       1. Backslash is an escape character, and the forms described in "ESCAPED
       CHARACTERS" above are recognized. Also:

	 \Q...\E   can be used to suppress interpretation
	 \l	   force the next character to lower case
	 \u	   force the next character to upper case
	 \L	   force subsequent characters to lower case
	 \U	   force subsequent characters to upper case
	 \u\L	   force next character to upper case, then all lower
	 \l\U	   force next character to lower case, then all upper
	 \E	   end \L or \U case forcing
	 \b	   backspace character (note: as in character class in pattern)
	 \v	   vertical tab character (note: not the same as in a pattern)

       2. The Python form \g<n>, where the angle brackets are part of the  syn-
       tax and n is either a group name or a number, is recognized as an alter-
       native way of inserting the contents of a group, for example \g<3>.

       3. Capture substitution supports the following additional forms:

	 ${n:-string}		  default for unset group
	 ${n:+string1:string2}	  values for set/unset group

       The  substitution strings themselves are expanded. Backslash can be used
       to escape colons and closing curly brackets.

SEE ALSO

       pcre2pattern(3),	  pcre2api(3),	  pcre2callout(3),    pcre2matching(3),
       pcre2(3).

AUTHOR

       Philip Hazel
       Retired from University Computing Service
       Cambridge, England.

REVISION

       Last updated: 27 November 2024
       Copyright (c) 1997-2024 University of Cambridge.

PCRE2 10.46			27 November 2024		 PCRE2SYNTAX(3)