search..
No manual entry for -- in section 3
termios(3)		    Library Functions Manual		     termios(3)

NAME
       termios,	 tcgetattr,  tcsetattr,	 tcsendbreak, tcdrain, tcflush, tcflow,
       cfmakeraw, cfgetospeed, cfgetispeed,  cfsetispeed,  cfsetospeed,	 cfset-
       speed  - get and set terminal attributes, line control, get and set baud
       rate

LIBRARY
       Standard C library (libc, -lc)

SYNOPSIS
       #include <termios.h>
       #include <unistd.h>

       int tcgetattr(int fd, struct termios *termios_p);
       int tcsetattr(int fd, int optional_actions,
		     const struct termios *termios_p);

       int tcsendbreak(int fd, int duration);
       int tcdrain(int fd);
       int tcflush(int fd, int queue_selector);
       int tcflow(int fd, int action);

       void cfmakeraw(struct termios *termios_p);

       speed_t cfgetispeed(const struct termios *termios_p);
       speed_t cfgetospeed(const struct termios *termios_p);

       int cfsetispeed(struct termios *termios_p, speed_t speed);
       int cfsetospeed(struct termios *termios_p, speed_t speed);
       int cfsetspeed(struct termios *termios_p, speed_t speed);

   Feature Test Macro Requirements for glibc (see feature_test_macros(7)):

       cfsetspeed(), cfmakeraw():
	   Since glibc 2.19:
	       _DEFAULT_SOURCE
	   glibc 2.19 and earlier:
	       _BSD_SOURCE

DESCRIPTION
       The termios functions describe a general terminal interface that is pro-
       vided to control asynchronous communications ports.

   The termios structure
       Many of the functions described here have a termios_p argument that is a
       pointer to a termios structure.	This structure contains	 at  least  the
       following members:

	   tcflag_t c_iflag;	  /* input modes */
	   tcflag_t c_oflag;	  /* output modes */
	   tcflag_t c_cflag;	  /* control modes */
	   tcflag_t c_lflag;	  /* local modes */
	   cc_t	    c_cc[NCCS];	  /* special characters */

       The values that may be assigned to these fields are described below.  In
       the  case  of the first four bit-mask fields, the definitions of some of
       the associated flags that may be set are exposed only if a specific fea-
       ture test macro (see feature_test_macros(7)) is	defined,  as  noted  in
       brackets ("[]").

       In  the	descriptions  below, "not in POSIX" means that the value is not
       specified in POSIX.1-2001, and "XSI" means that the value  is  specified
       in POSIX.1-2001 as part of the XSI extension.

       c_iflag flag constants:

       IGNBRK Ignore BREAK condition on input.

       BRKINT If  IGNBRK  is  set,  a  BREAK  is ignored.  If it is not set but
	      BRKINT is set, then a BREAK causes the input and output queues to
	      be flushed, and if the terminal is the controlling terminal of  a
	      foreground  process  group,  it will cause a SIGINT to be sent to
	      this foreground process group.  When neither  IGNBRK  nor	 BRKINT
	      are  set, a BREAK reads as a null byte ('\0'), except when PARMRK
	      is set, in which case it reads as the sequence \377 \0 \0.

       IGNPAR Ignore framing errors and parity errors.

       PARMRK If this bit is set, input bytes with parity or framing errors are
	      marked when passed to the program.  This bit is  meaningful  only
	      when INPCK is set and IGNPAR is not set.	The way erroneous bytes
	      are  marked  is with two preceding bytes, \377 and \0.  Thus, the
	      program actually reads three bytes for  one  erroneous  byte  re-
	      ceived  from  the	 terminal.  If a valid byte has the value \377,
	      and ISTRIP (see below) is not set, the program might  confuse  it
	      with  the	 prefix	 that marks a parity error.  Therefore, a valid
	      byte \377 is passed to the program as two bytes,	\377  \377,  in
	      this case.

	      If neither IGNPAR nor PARMRK is set, read a character with a par-
	      ity error or framing error as \0.

       INPCK  Enable input parity checking.

       ISTRIP Strip off eighth bit.

       INLCR  Translate NL to CR on input.

       IGNCR  Ignore carriage return on input.

       ICRNL  Translate	 carriage  return  to newline on input (unless IGNCR is
	      set).

       IUCLC  (not in POSIX) Map uppercase characters to lowercase on input.

       IXON   Enable XON/XOFF flow control on output.

       IXANY  (XSI) Typing any character will restart stopped output.  (The de-
	      fault is to allow just the START character to restart output.)

       IXOFF  Enable XON/XOFF flow control on input.

       IMAXBEL
	      (not in POSIX) Ring bell when input queue is  full.   Linux  does
	      not implement this bit, and acts as if it is always set.

       IUTF8 (since Linux 2.6.4)
	      (not  in	POSIX) Input is UTF8; this allows character-erase to be
	      correctly performed in cooked mode.

       c_oflag flag constants:

       OPOST  Enable implementation-defined output processing.

       OLCUC  (not in POSIX) Map lowercase characters to uppercase on output.

       ONLCR  (XSI) Map NL to CR-NL on output.

       OCRNL  Map CR to NL on output.

       ONOCR  Don't output CR at column 0.

       ONLRET The NL character is assumed to do the  carriage-return  function;
	      the kernel's idea of the current column is set to 0 after both NL
	      and CR.

       OFILL  Send  fill  characters for a delay, rather than using a timed de-
	      lay.

       OFDEL  Fill character is ASCII DEL (0177).  If unset, fill character  is
	      ASCII NUL ('\0').	 (Not implemented on Linux.)

       NLDLY  Newline	delay	mask.	Values	are  NL0  and  NL1.   [requires
	      _BSD_SOURCE or _SVID_SOURCE or _XOPEN_SOURCE]

       CRDLY  Carriage return delay mask.  Values are CR0, CR1,	 CR2,  or  CR3.
	      [requires _BSD_SOURCE or _SVID_SOURCE or _XOPEN_SOURCE]

       TABDLY Horizontal tab delay mask.  Values are TAB0, TAB1, TAB2, TAB3 (or
	      XTABS,  but  see	the  BUGS  section).  A value of TAB3, that is,
	      XTABS, expands  tabs  to	spaces	(with  tab  stops  every  eight
	      columns).	    [requires	 _BSD_SOURCE	or    _SVID_SOURCE   or
	      _XOPEN_SOURCE]

       BSDLY  Backspace delay mask.  Values are BS0 or BS1.   (Has  never  been
	      implemented.)    [requires   _BSD_SOURCE	 or   _SVID_SOURCE   or
	      _XOPEN_SOURCE]

       VTDLY  Vertical tab delay mask.	Values are VT0 or VT1.

       FFDLY  Form  feed  delay	 mask.	 Values	 are  FF0  or  FF1.   [requires
	      _BSD_SOURCE or _SVID_SOURCE or _XOPEN_SOURCE]

       c_cflag flag constants:

       CBAUD  (not in POSIX) Baud speed mask (4+1 bits).  [requires _BSD_SOURCE
	      or _SVID_SOURCE]

       CBAUDEX
	      (not  in POSIX) Extra baud speed mask (1 bit), included in CBAUD.
	      [requires _BSD_SOURCE or _SVID_SOURCE]

	      (POSIX says that the baud speed is stored in the	termios	 struc-
	      ture   without   specifying   where   precisely,	 and   provides
	      cfgetispeed() and cfsetispeed() for getting at it.  Some	systems
	      use bits selected by CBAUD in c_cflag, other systems use separate
	      fields, for example, sg_ispeed and sg_ospeed.)

       CSIZE  Character size mask.  Values are CS5, CS6, CS7, or CS8.

       CSTOPB Set two stop bits, rather than one.

       CREAD  Enable receiver.

       PARENB Enable parity generation on output and parity checking for input.

       PARODD If  set,	then parity for input and output is odd; otherwise even
	      parity is used.

       HUPCL  Lower modem control lines after last process  closes  the	 device
	      (hang up).

       CLOCAL Ignore modem control lines.

       LOBLK  (not  in	POSIX) Block output from a noncurrent shell layer.  For
	      use by shl (shell layers).  (Not implemented on Linux.)

       CIBAUD (not in POSIX) Mask for input speeds.  The values for the	 CIBAUD
	      bits  are the same as the values for the CBAUD bits, shifted left
	      IBSHIFT bits.  [requires _BSD_SOURCE or _SVID_SOURCE] (Not imple-
	      mented in glibc, supported on Linux via TCGET* and TCSET* ioctls;
	      see ioctl_tty(2))

       CMSPAR (not in POSIX) Use "stick" (mark/space) parity (supported on cer-
	      tain serial devices): if PARODD is set, the parity bit is	 always
	      1;  if  PARODD is not set, then the parity bit is always 0.  [re-
	      quires _BSD_SOURCE or _SVID_SOURCE]

       CRTSCTS
	      (not in POSIX) Enable RTS/CTS (hardware) flow control.  [requires
	      _BSD_SOURCE or _SVID_SOURCE]

       c_lflag flag constants:

       ISIG   When any of the characters INTR, QUIT, SUSP,  or	DSUSP  are  re-
	      ceived, generate the corresponding signal.

       ICANON Enable canonical mode (described below).

       XCASE  (not  in POSIX; not supported under Linux) If ICANON is also set,
	      terminal is uppercase only.  Input is converted to lowercase, ex-
	      cept for characters preceded by \.  On output, uppercase	charac-
	      ters  are preceded by \ and lowercase characters are converted to
	      uppercase.    [requires	_BSD_SOURCE    or    _SVID_SOURCE    or
	      _XOPEN_SOURCE]

       ECHO   Echo input characters.

       ECHOE  If  ICANON  is also set, the ERASE character erases the preceding
	      input character, and WERASE erases the preceding word.

       ECHOK  If ICANON is also set, the  KILL	character  erases  the	current
	      line.

       ECHONL If  ICANON is also set, echo the NL character even if ECHO is not
	      set.

       ECHOCTL
	      (not in POSIX) If ECHO is also set, terminal  special  characters
	      other  than TAB, NL, START, and STOP are echoed as ^X, where X is
	      the character with ASCII code 0x40 greater than the special char-
	      acter.  For example, character 0x08 (BS) is echoed as  ^H.   [re-
	      quires _BSD_SOURCE or _SVID_SOURCE]

       ECHOPRT
	      (not  in	POSIX)	If ICANON and ECHO are also set, characters are
	      printed as they  are  being  erased.   [requires	_BSD_SOURCE  or
	      _SVID_SOURCE]

       ECHOKE (not  in	POSIX) If ICANON is also set, KILL is echoed by erasing
	      each character on the line, as specified by  ECHOE  and  ECHOPRT.
	      [requires _BSD_SOURCE or _SVID_SOURCE]

       DEFECHO
	      (not  in POSIX) Echo only when a process is reading.  (Not imple-
	      mented on Linux.)

       FLUSHO (not in  POSIX;  not  supported  under  Linux)  Output  is  being
	      flushed.	 This  flag is toggled by typing the DISCARD character.
	      [requires _BSD_SOURCE or _SVID_SOURCE]

       NOFLSH Disable flushing the input and output queues when generating sig-
	      nals for the INT, QUIT, and SUSP characters.

       TOSTOP Send the SIGTTOU signal to the  process  group  of  a  background
	      process which tries to write to its controlling terminal.

       PENDIN (not  in	POSIX; not supported under Linux) All characters in the
	      input queue are  reprinted  when	the  next  character  is  read.
	      (bash(1)	handles	 typeahead this way.)  [requires _BSD_SOURCE or
	      _SVID_SOURCE]

       IEXTEN Enable implementation-defined input processing.	This  flag,  as
	      well  as	ICANON must be enabled for the special characters EOL2,
	      LNEXT, REPRINT, WERASE to be interpreted, and for the IUCLC  flag
	      to be effective.

       The  c_cc  array	 defines the terminal special characters.  The symbolic
       indices (initial values) and meaning are:

       VDISCARD
	      (not in POSIX; not supported under Linux; 017, SI,  Ctrl-O)  Tog-
	      gle:  start/stop discarding pending output.  Recognized when IEX-
	      TEN is set, and then not passed as input.

       VDSUSP (not in POSIX; not supported under Linux; 031,  EM,  Ctrl-Y)  De-
	      layed  suspend  character	 (DSUSP):  send SIGTSTP signal when the
	      character is read by the user program.   Recognized  when	 IEXTEN
	      and  ISIG	 are set, and the system supports job control, and then
	      not passed as input.

       VEOF   (004, EOT, Ctrl-D) End-of-file character (EOF).  More  precisely:
	      this  character  causes  the pending tty buffer to be sent to the
	      waiting user program without waiting for end-of-line.  If	 it  is
	      the  first character of the line, the read(2) in the user program
	      returns 0, which signifies end-of-file.  Recognized  when	 ICANON
	      is set, and then not passed as input.

       VEOL   (0, NUL) Additional end-of-line character (EOL).	Recognized when
	      ICANON is set.

       VEOL2  (not  in POSIX; 0, NUL) Yet another end-of-line character (EOL2).
	      Recognized when ICANON is set.

       VERASE (0177, DEL, rubout, or 010, BS, Ctrl-H, or also #) Erase	charac-
	      ter  (ERASE).  This erases the previous not-yet-erased character,
	      but does not erase past  EOF  or	beginning-of-line.   Recognized
	      when ICANON is set, and then not passed as input.

       VINTR  (003, ETX, Ctrl-C, or also 0177, DEL, rubout) Interrupt character
	      (INTR).	Send a SIGINT signal.  Recognized when ISIG is set, and
	      then not passed as input.

       VKILL  (025, NAK, Ctrl-U, or Ctrl-X, or also @) Kill  character	(KILL).
	      This  erases  the	 input since the last EOF or beginning-of-line.
	      Recognized when ICANON is set, and then not passed as input.

       VLNEXT (not in POSIX; 026, SYN, Ctrl-V) Literal	next  (LNEXT).	 Quotes
	      the  next	 input	character,  depriving  it of a possible special
	      meaning.	Recognized when IEXTEN is set, and then not  passed  as
	      input.

       VMIN   Minimum number of characters for noncanonical read (MIN).

       VQUIT  (034,  FS,  Ctrl-\)  Quit character (QUIT).  Send SIGQUIT signal.
	      Recognized when ISIG is set, and then not passed as input.

       VREPRINT
	      (not in  POSIX;  022,  DC2,  Ctrl-R)  Reprint  unread  characters
	      (REPRINT).   Recognized  when ICANON and IEXTEN are set, and then
	      not passed as input.

       VSTART (021, DC1, Ctrl-Q)  Start	 character  (START).   Restarts	 output
	      stopped  by the Stop character.  Recognized when IXON is set, and
	      then not passed as input.

       VSTATUS
	      (not in POSIX; not supported under Linux;	 status	 request:  024,
	      DC4,  Ctrl-T).  Status character (STATUS).  Display status infor-
	      mation at terminal, including state  of  foreground  process  and
	      amount  of CPU time it has consumed.  Also sends a SIGINFO signal
	      (not supported on Linux) to the foreground process group.

       VSTOP  (023, DC3, Ctrl-S) Stop  character  (STOP).   Stop  output  until
	      Start character typed.  Recognized when IXON is set, and then not
	      passed as input.

       VSUSP  (032,  SUB,  Ctrl-Z) Suspend character (SUSP).  Send SIGTSTP sig-
	      nal.  Recognized when ISIG is set, and then not passed as input.

       VSWTCH (not in POSIX; not supported under Linux; 0, NUL) Switch	charac-
	      ter  (SWTCH).  Used in System V to switch shells in shell layers,
	      a predecessor to shell job control.

       VTIME  Timeout in deciseconds for noncanonical read (TIME).

       VWERASE
	      (not in POSIX; 027, ETB, Ctrl-W) Word erase (WERASE).  Recognized
	      when ICANON and IEXTEN are set, and then not passed as input.

       An individual terminal special character can be disabled by setting  the
       value of the corresponding c_cc element to _POSIX_VDISABLE.

       The  above  symbolic  subscript	values	are  all different, except that
       VTIME, VMIN may have the same value as  VEOL,  VEOF,  respectively.   In
       noncanonical mode the special character meaning is replaced by the time-
       out  meaning.  For an explanation of VMIN and VTIME, see the description
       of noncanonical mode below.

   Retrieving and changing terminal settings
       tcgetattr() gets the parameters associated with the object  referred  by
       fd  and	stores	them  in the termios structure referenced by termios_p.
       This function may be invoked from a  background	process;  however,  the
       terminal attributes may be subsequently changed by a foreground process.

       tcsetattr()  sets  the  parameters  associated with the terminal (unless
       support is required from the underlying hardware that is not  available)
       from  the  termios structure referred to by termios_p.  optional_actions
       specifies when the changes take effect:

       TCSANOW
	      the change occurs immediately.

       TCSADRAIN
	      the change occurs after all output written to fd has been	 trans-
	      mitted.  This option should be used when changing parameters that
	      affect output.

       TCSAFLUSH
	      the change occurs after all output written to the object referred
	      by  fd has been transmitted, and all input that has been received
	      but not read will be discarded before the change is made.

   Canonical and noncanonical mode
       The setting of the ICANON canon flag in c_lflag determines  whether  the
       terminal	 is  operating	in  canonical mode (ICANON set) or noncanonical
       mode (ICANON unset).  By default, ICANON is set.

       In canonical mode:

       o  Input is made available line by line.	 An  input  line  is  available
	  when	one  of	 the line delimiters is typed (NL, EOL, EOL2; or EOF at
	  the start of line).  Except in the case of EOF, the line delimiter is
	  included in the buffer returned by read(2).

       o  Line editing is enabled (ERASE, KILL; and if the IEXTEN flag is  set:
	  WERASE,  REPRINT,  LNEXT).  A read(2) returns at most one line of in-
	  put; if the read(2) requested fewer bytes than are available	in  the
	  current line of input, then only as many bytes as requested are read,
	  and the remaining characters will be available for a future read(2).

       o  The maximum line length is 4096 chars (including the terminating new-
	  line	character);  lines longer than 4096 chars are truncated.  After
	  4095 characters, input processing (e.g., ISIG and  ECHO*  processing)
	  continues,  but  any	input data after 4095 characters up to (but not
	  including) any terminating newline is discarded.  This  ensures  that
	  the  terminal	 can  always receive more input until at least one line
	  can be read.

       In noncanonical mode input is available immediately  (without  the  user
       having  to type a line-delimiter character), no input processing is per-
       formed, and line editing is disabled.  The read buffer will only	 accept
       4095  chars; this provides the necessary space for a newline char if the
       input mode is switched to canonical.  The settings of  MIN  (c_cc[VMIN])
       and  TIME  (c_cc[VTIME])	 determine the circumstances in which a read(2)
       completes; there are four distinct cases:

       MIN == 0, TIME == 0 (polling read)
	      If data is  available,  read(2)  returns	immediately,  with  the
	      lesser  of  the number of bytes available, or the number of bytes
	      requested.  If no data is available, read(2) returns 0.

       MIN > 0, TIME == 0 (blocking read)
	      read(2) blocks until MIN bytes are available, and returns	 up  to
	      the number of bytes requested.

       MIN == 0, TIME > 0 (read with timeout)
	      TIME  specifies the limit for a timer in tenths of a second.  The
	      timer is started when read(2) is called.	read(2) returns	 either
	      when  at	least  one byte of data is available, or when the timer
	      expires.	If the timer expires without any input becoming	 avail-
	      able,  read(2)  returns  0.   If data is already available at the
	      time of the call to read(2), the call behaves as though the  data
	      was received immediately after the call.

       MIN > 0, TIME > 0 (read with interbyte timeout)
	      TIME specifies the limit for a timer in tenths of a second.  Once
	      an  initial  byte	 of  input  becomes  available,	 the  timer  is
	      restarted after each further byte is received.   read(2)	returns
	      when any of the following conditions is met:

	      o	 MIN bytes have been received.

	      o	 The interbyte timer expires.

	      o	 The  number  of  bytes requested by read(2) has been received.
		 (POSIX does not specify this  termination  condition,	and  on
		 some  other  implementations  read(2)	does not return in this
		 case.)

	      Because the timer is started only after the initial byte	becomes
	      available,  at  least  one byte will be read.  If data is already
	      available at the time of the call to read(2), the call behaves as
	      though the data was received immediately after the call.

       POSIX does not specify whether the setting of the O_NONBLOCK file status
       flag takes precedence over the MIN and TIME settings.  If O_NONBLOCK  is
       set,  a	read(2) in noncanonical mode may return immediately, regardless
       of the setting of MIN or TIME.  Furthermore, if no  data	 is  available,
       POSIX  permits  a read(2) in noncanonical mode to return either 0, or -1
       with errno set to EAGAIN.

   Raw mode
       cfmakeraw() sets the terminal to something like the "raw"  mode	of  the
       old  Version  7 terminal driver: input is available character by charac-
       ter, echoing is disabled, and all special processing of	terminal  input
       and  output  characters is disabled.  The terminal attributes are set as
       follows:

	   termios_p->c_iflag &= ~(IGNBRK | BRKINT | PARMRK | ISTRIP
			   | INLCR | IGNCR | ICRNL | IXON);
	   termios_p->c_oflag &= ~OPOST;
	   termios_p->c_lflag &= ~(ECHO | ECHONL | ICANON | ISIG | IEXTEN);
	   termios_p->c_cflag &= ~(CSIZE | PARENB);
	   termios_p->c_cflag |= CS8;

   Line control
       tcsendbreak() transmits a continuous stream of zero-valued  bits	 for  a
       specific	 duration,  if	the  terminal is using asynchronous serial data
       transmission.  If duration is zero, it transmits zero-valued bits for at
       least 0.25 seconds, and not more than 0.5 seconds.  If duration	is  not
       zero,  it  sends zero-valued bits for some implementation-defined length
       of time.

       If the terminal is not using asynchronous serial data transmission,  tc-
       sendbreak() returns without taking any action.

       tcdrain() waits until all output written to the object referred to by fd
       has been transmitted.

       tcflush()  discards data written to the object referred to by fd but not
       transmitted, or data received but not read, depending on	 the  value  of
       queue_selector:

       TCIFLUSH
	      flushes data received but not read.

       TCOFLUSH
	      flushes data written but not transmitted.

       TCIOFLUSH
	      flushes both data received but not read, and data written but not
	      transmitted.

       tcflow()	 suspends  transmission	 or reception of data on the object re-
       ferred to by fd, depending on the value of action:

       TCOOFF suspends output.

       TCOON  restarts suspended output.

       TCIOFF transmits a STOP character, which stops the terminal device  from
	      transmitting data to the system.

       TCION  transmits	 a  START  character,  which starts the terminal device
	      transmitting data to the system.

       The default on open of a terminal file is that neither its input nor its
       output is suspended.

   Line speed
       The baud rate functions are provided for getting and setting the	 values
       of  the	input  and output baud rates in the termios structure.	The new
       values do not take effect until tcsetattr() is successfully called.

       Setting the speed to B0 instructs the modem to "hang  up".   The	 actual
       bit rate corresponding to B38400 may be altered with setserial(8).

       The input and output baud rates are stored in the termios structure.

       cfgetospeed()  returns the output baud rate stored in the termios struc-
       ture pointed to by termios_p.

       cfsetospeed() sets the output baud rate stored in the termios  structure
       pointed to by termios_p to speed, which must be one of these constants:

	      B0
	      B50
	      B75
	      B110
	      B134
	      B150
	      B200
	      B300
	      B600
	      B1200
	      B1800
	      B2400
	      B4800
	      B9600
	      B19200
	      B38400
	      B57600
	      B115200
	      B230400
	      B460800
	      B500000
	      B576000
	      B921600
	      B1000000
	      B1152000
	      B1500000
	      B2000000

       These constants are additionally supported on the SPARC architecture:

	      B76800
	      B153600
	      B307200
	      B614400

       These constants are additionally supported on non-SPARC architectures:

	      B2500000
	      B3000000
	      B3500000
	      B4000000

       Due  to	differences between architectures, portable applications should
       check if a particular Bnnn constant is defined prior to using it.

       The zero baud rate, B0, is used to terminate the connection.  If	 B0  is
       specified,  the	modem  control lines shall no longer be asserted.  Nor-
       mally, this will disconnect the line.  CBAUDEX is a mask for the	 speeds
       beyond  those  defined  in  POSIX.1  (57600  and above).	 Thus, B57600 &
       CBAUDEX is nonzero.

       Setting the baud rate to a value other than those defined by  Bnnn  con-
       stants is possible via the TCSETS2 ioctl; see ioctl_tty(2).

       cfgetispeed()  returns  the input baud rate stored in the termios struc-
       ture.

       cfsetispeed() sets the input baud rate stored in the  termios  structure
       to  speed,  which  must be specified as one of the Bnnn constants listed
       above for cfsetospeed().	 If the input baud rate is set to  the	literal
       constant	 0  (not the symbolic constant B0), the input baud rate will be
       equal to the output baud rate.

       cfsetspeed() is a 4.4BSD extension.  It takes the same arguments as  cf-
       setispeed(), and sets both input and output speed.

RETURN VALUE
       cfgetispeed()  returns  the input baud rate stored in the termios struc-
       ture.

       cfgetospeed() returns the output baud rate stored in the termios	 struc-
       ture.

       All other functions return:

       0      on success.

       -1     on failure and set errno to indicate the error.

       Note  that  tcsetattr()	returns success if any of the requested changes
       could be successfully carried  out.   Therefore,	 when  making  multiple
       changes	it  may be necessary to follow this call with a further call to
       tcgetattr() to check that all changes have been performed successfully.

ATTRIBUTES
       For an explanation of the terms used in this section, see attributes(7).
       +--------------------------------------------+---------------+---------+
       | Interface				    | Attribute	    | Value   |
       +--------------------------------------------+---------------+---------+
       | tcgetattr(), tcsetattr(), tcdrain(),	    | Thread safety | MT-Safe |
       | tcflush(), tcflow(), tcsendbreak(),	    |		    |	      |
       | cfmakeraw(), cfgetispeed(), cfgetospeed(), |		    |	      |
       | cfsetispeed(), cfsetospeed(), cfsetspeed() |		    |	      |
       +--------------------------------------------+---------------+---------+

STANDARDS
       tcgetattr()
       tcsetattr()
       tcsendbreak()
       tcdrain()
       tcflush()
       tcflow()
       cfgetispeed()
       cfgetospeed()
       cfsetispeed()
       cfsetospeed()
	      POSIX.1-2008.

       cfmakeraw()
       cfsetspeed()
	      BSD.

HISTORY
       tcgetattr()
       tcsetattr()
       tcsendbreak()
       tcdrain()
       tcflush()
       tcflow()
       cfgetispeed()
       cfgetospeed()
       cfsetispeed()
       cfsetospeed()
	      POSIX.1-2001.

       cfmakeraw()
       cfsetspeed()
	      BSD.

NOTES
       UNIX V7 and several later systems have a list of baud rates where  after
       the values B0 through B9600 one finds the two constants EXTA, EXTB ("Ex-
       ternal  A"  and	"External  B").	 Many systems extend the list with much
       higher baud rates.

       The effect of a nonzero duration with tcsendbreak() varies.  SunOS spec-
       ifies a break of duration * N seconds, where N is at least 0.25, and not
       more than 0.5.  Linux, AIX, DU, Tru64 send a break of duration millisec-
       onds.  FreeBSD and NetBSD and HP-UX and MacOS ignore the value of  dura-
       tion.   Under  Solaris and UnixWare, tcsendbreak() with nonzero duration
       behaves like tcdrain().

BUGS
       On the Alpha architecture before Linux  4.16  (and  glibc  before  glibc
       2.28), the XTABS value was different from TAB3 and it was ignored by the
       N_TTY  line  discipline code of the terminal driver as a result (because
       as it wasn't part of the TABDLY mask).

SEE ALSO
       reset(1), setterm(1),  stty(1),	tput(1),  tset(1),  tty(1),  ioctl_con-
       sole(2),	 ioctl_tty(2),	cc_t(3type),  speed_t(3type),  tcflag_t(3type),
       setserial(8)

Linux man-pages 6.9.1		   2024-06-15			     termios(3)