search..
No manual entry for -- in section 2
personality(2)		      System Calls Manual		 personality(2)

NAME
       personality - set the process execution domain

LIBRARY
       Standard C library (libc, -lc)

SYNOPSIS
       #include <sys/personality.h>

       int personality(unsigned long persona);

DESCRIPTION
       Linux  supports	different execution domains, or personalities, for each
       process.	 Among other things, execution domains tell Linux  how	to  map
       signal  numbers into signal actions.  The execution domain system allows
       Linux to provide limited support for binaries compiled under other UNIX-
       like operating systems.

       If persona is not 0xffffffff, then personality() sets the caller's  exe-
       cution  domain to the value specified by persona.  Specifying persona as
       0xffffffff provides a way of  retrieving	 the  current  persona	without
       changing it.

       A list of the available execution domains can be found in <sys/personal-
       ity.h>.	 The  execution domain is a 32-bit value in which the top three
       bytes are set aside for flags that cause the kernel to modify the behav-
       ior of certain system calls so as to emulate historical or architectural
       quirks.	The least significant byte is a value defining the  personality
       the kernel should assume.  The flag values are as follows:

       ADDR_COMPAT_LAYOUT (since Linux 2.6.9)
	      With this flag set, provide legacy virtual address space layout.

       ADDR_NO_RANDOMIZE (since Linux 2.6.12)
	      With this flag set, disable address-space-layout randomization.

       ADDR_LIMIT_32BIT (since Linux 2.2)
	      Limit the address space to 32 bits.

       ADDR_LIMIT_3GB (since Linux 2.4.0)
	      With  this  flag	set,  use  0xc0000000 as the offset at which to
	      search  a	 virtual  memory  chunk	 on  mmap(2);	otherwise   use
	      0xffffe000.  Applies to 32-bit x86 processes only.

       FDPIC_FUNCPTRS (since Linux 2.6.11)
	      User-space function pointers to signal handlers point to descrip-
	      tors.  Applies only to ARM if BINFMT_ELF_FDPIC and SuperH.

       MMAP_PAGE_ZERO (since Linux 2.4.0)
	      Map  page 0 as read-only (to support binaries that depend on this
	      SVr4 behavior).

       READ_IMPLIES_EXEC (since Linux 2.6.8)
	      With this flag set, PROT_READ implies PROT_EXEC for mmap(2).

       SHORT_INODE (since Linux 2.4.0)
	      No effect.

       STICKY_TIMEOUTS (since Linux 1.2.0)
	      With this flag set, select(2), pselect(2), and  ppoll(2)	do  not
	      modify the returned timeout argument when interrupted by a signal
	      handler.

       UNAME26 (since Linux 3.1)
	      Have  uname(2)  report  a 2.6.(40+x) version number rather than a
	      MAJOR.x version number.  Added as a stopgap  measure  to	support
	      broken applications that could not handle the kernel version-num-
	      bering switch from Linux 2.6.x to Linux 3.x.

       WHOLE_SECONDS (since Linux 1.2.0)
	      No effect.

       The available execution domains are:

       PER_BSD (since Linux 1.2.0)
	      BSD. (No effects.)

       PER_HPUX (since Linux 2.4)
	      Support  for  32-bit HP/UX.  This support was never complete, and
	      was dropped so that since Linux 4.0, this value has no effect.

       PER_IRIX32 (since Linux 2.2)
	      IRIX 5 32-bit.  Never fully functional; support dropped in  Linux
	      2.6.27.  Implies STICKY_TIMEOUTS.

       PER_IRIX64 (since Linux 2.2)
	      IRIX 6 64-bit.  Implies STICKY_TIMEOUTS; otherwise no effect.

       PER_IRIXN32 (since Linux 2.2)
	      IRIX 6 new 32-bit.  Implies STICKY_TIMEOUTS; otherwise no effect.

       PER_ISCR4 (since Linux 1.2.0)
	      Implies STICKY_TIMEOUTS; otherwise no effect.

       PER_LINUX (since Linux 1.2.0)
	      Linux.

       PER_LINUX32 (since Linux 2.2)
	      uname(2)	returns	 the name of the 32-bit architecture in the ma-
	      chine field ("i686" instead of "x86_64", &c.).

	      Under ia64 (Itanium), processes with this personality don't  have
	      the O_LARGEFILE open(2) flag forced.

	      Under  64-bit  ARM,  setting this personality is forbidden if ex-
	      ecve(2)ing a 32-bit process would also be forbidden (cf. the  al-
	      low_mismatched_32bit_el0	  kernel   parameter   and   Documenta-
	      tion/arm64/asymmetric-32bit.rst).

       PER_LINUX32_3GB (since Linux 2.4)
	      Same as PER_LINUX32, but implies ADDR_LIMIT_3GB.

       PER_LINUX_32BIT (since Linux 2.0)
	      Same as PER_LINUX, but implies ADDR_LIMIT_32BIT.

       PER_LINUX_FDPIC (since Linux 2.6.11)
	      Same as PER_LINUX, but implies FDPIC_FUNCPTRS.

       PER_OSF4 (since Linux 2.4)
	      OSF/1 v4.	 No effect since Linux 6.1, which removed a.out	 binary
	      support.	Before, on alpha, would clear top 32 bits of iov_len in
	      the  user's  buffer  for compatibility with old versions of OSF/1
	      where iov_len was defined as.  int.

       PER_OSR5 (since Linux 2.4)
	      SCO OpenServer 5.	  Implies  STICKY_TIMEOUTS  and	 WHOLE_SECONDS;
	      otherwise no effect.

       PER_RISCOS (since Linux 2.3.7; macro since Linux 2.3.13)
	      Acorn RISC OS/Arthur (MIPS).  No effect.	Up to Linux v4.0, would
	      set  the	emulation altroot to /usr/gnemul/riscos (cf. PER_SUNOS,
	      below).  Before then, up to Linux 2.6.3, just Arthur emulation.

       PER_SCOSVR3 (since Linux 1.2.0)
	      SCO UNIX System V Release 3.  Same as PER_OSR5, but also	implies
	      SHORT_INODE.

       PER_SOLARIS (since Linux 2.4)
	      Solaris.	Implies STICKY_TIMEOUTS; otherwise no effect.

       PER_SUNOS (since Linux 2.4.0)
	      Sun  OS.	Same as PER_BSD, but implies STICKY_TIMEOUTS.  Prior to
	      Linux 2.6.26, diverted library and  dynamic  linker  searches  to
	      /usr/gnemul.   Buggy,  largely  unmaintained, and almost entirely
	      unused.

       PER_SVR3 (since Linux 1.2.0)
	      AT&T UNIX	 System	 V  Release  3.	  Implies  STICKY_TIMEOUTS  and
	      SHORT_INODE; otherwise no effect.

       PER_SVR4 (since Linux 1.2.0)
	      AT&T  UNIX  System  V  Release  4.   Implies  STICKY_TIMEOUTS and
	      MMAP_PAGE_ZERO; otherwise no effect.

       PER_UW7 (since Linux 2.4)
	      UnixWare 7.  Implies STICKY_TIMEOUTS and	MMAP_PAGE_ZERO;	 other-
	      wise no effect.

       PER_WYSEV386 (since Linux 1.2.0)
	      WYSE UNIX System V/386.  Implies STICKY_TIMEOUTS and SHORT_INODE;
	      otherwise no effect.

       PER_XENIX (since Linux 1.2.0)
	      XENIX.  Implies STICKY_TIMEOUTS and SHORT_INODE; otherwise no ef-
	      fect.

RETURN VALUE
       On success, the previous persona is returned.  On error, -1 is returned,
       and errno is set to indicate the error.

ERRORS
       EINVAL The kernel was unable to change the personality.

STANDARDS
       Linux.

HISTORY
       Linux 1.1.20, glibc 2.3.

SEE ALSO
       setarch(8)

Linux man-pages 6.9.1		   2024-05-02			 personality(2)