search..
No manual entry for -- in section 1SSL
OPENSSL-S_SERVER(1SSL)		    OpenSSL		 OPENSSL-S_SERVER(1SSL)

NAME
       openssl-s_server - SSL/TLS server program

SYNOPSIS
       openssl s_server [-help] [-port +int] [-accept val] [-unix val] [-4]
       [-6] [-unlink] [-context val] [-verify int] [-Verify int] [-cert infile]
       [-cert2 infile] [-certform DER|PEM|P12] [-cert_chain infile]
       [-build_chain] [-serverinfo val] [-key filename|uri] [-key2
       filename|uri] [-keyform DER|PEM|P12|ENGINE] [-pass val] [-dcert infile]
       [-dcertform DER|PEM|P12] [-dcert_chain infile] [-dkey filename|uri]
       [-dkeyform DER|PEM|P12|ENGINE] [-dpass val] [-nbio_test] [-crlf]
       [-debug] [-msg] [-msgfile outfile] [-state] [-nocert] [-quiet]
       [-no_resume_ephemeral] [-www] [-WWW] [-http_server_binmode]
       [-no_ca_names] [-ignore_unexpected_eof] [-servername]
       [-servername_fatal] [-tlsextdebug] [-HTTP] [-id_prefix val]
       [-keymatexport val] [-keymatexportlen +int] [-CRL infile] [-CRLform
       DER|PEM] [-crl_download] [-chainCAfile infile] [-chainCApath dir]
       [-chainCAstore uri] [-verifyCAfile infile] [-verifyCApath dir]
       [-verifyCAstore uri] [-no_cache] [-ext_cache] [-verify_return_error]
       [-verify_quiet] [-ign_eof] [-no_ign_eof] [-no_ems] [-status]
       [-status_verbose] [-status_timeout int] [-proxy
       [http[s]://][userinfo@]host[:port][/path][?query][#fragment]] [-no_proxy
       addresses] [-status_url val] [-status_file infile] [-ssl_config val]
       [-trace] [-security_debug] [-security_debug_verbose] [-brief] [-rev]
       [-async] [-max_send_frag +int] [-split_send_frag +int] [-max_pipelines
       +int] [-naccept +int] [-read_buf +int] [-no_tx_cert_comp]
       [-no_rx_cert_comp] [-dhparam infile] [-nbio] [-psk_identity val]
       [-psk_hint val] [-psk val] [-psk_session file] [-srpvfile infile]
       [-srpuserseed val] [-timeout] [-mtu +int] [-listen] [-sctp]
       [-sctp_label_bug] [-use_srtp val] [-no_dhe] [-nextprotoneg val] [-alpn
       val] [-ktls] [-sendfile] [-zerocopy_sendfile] [-keylogfile outfile]
       [-recv_max_early_data int] [-max_early_data int] [-early_data]
       [-stateless] [-anti_replay] [-no_anti_replay] [-num_tickets] [-tfo]
       [-cert_comp] [-nameopt option] [-no_ssl3] [-no_tls1] [-no_tls1_1]
       [-no_tls1_2] [-no_tls1_3] [-ssl3] [-tls1] [-tls1_1] [-tls1_2] [-tls1_3]
       [-dtls] [-dtls1] [-dtls1_2] [-allow_proxy_certs] [-attime timestamp]
       [-no_check_time] [-check_ss_sig] [-crl_check] [-crl_check_all]
       [-explicit_policy] [-extended_crl] [-ignore_critical] [-inhibit_any]
       [-inhibit_map] [-partial_chain] [-policy arg] [-policy_check]
       [-policy_print] [-purpose purpose] [-suiteB_128] [-suiteB_128_only]
       [-suiteB_192] [-trusted_first] [-no_alt_chains] [-use_deltas]
       [-auth_level num] [-verify_depth num] [-verify_email email]
       [-verify_hostname hostname] [-verify_ip ip] [-verify_name name]
       [-x509_strict] [-issuer_checks] [-bugs] [-no_comp] [-comp] [-no_ticket]
       [-serverpref] [-client_renegotiation] [-legacy_renegotiation]
       [-no_renegotiation] [-no_resumption_on_reneg] [-legacy_server_connect]
       [-no_legacy_server_connect] [-no_etm] [-allow_no_dhe_kex]
       [-prefer_no_dhe_kex] [-prioritize_chacha] [-strict] [-sigalgs algs]
       [-client_sigalgs algs] [-groups groups] [-curves curves] [-named_curve
       curve] [-cipher ciphers] [-ciphersuites 1.3ciphers] [-min_protocol
       minprot] [-max_protocol maxprot] [-record_padding padding]
       [-debug_broken_protocol] [-no_middlebox] [-xkey infile] [-xcert file]
       [-xchain file] [-xchain_build file] [-xcertform DER|PEM]> [-xkeyform
       DER|PEM]> [-CAfile file] [-no-CAfile] [-CApath dir] [-no-CApath]
       [-CAstore uri] [-no-CAstore] [-rand files] [-writerand file] [-engine
       id] [-provider name] [-provider-path path] [-provparam [name:]key=value]
       [-propquery propq] [-enable_server_rpk] [-enable_client_rpk]

DESCRIPTION
       This command implements a generic SSL/TLS server which listens for
       connections on a given port using SSL/TLS.

OPTIONS
       In addition to the options below, this command also supports the common
       and server only options documented "Supported Command Line Commands" in
       SSL_CONF_cmd(3)

       -help
	   Print out a usage message.

       -port +int
	   The	TCP port to listen on for connections. If not specified 4433 is
	   used.

       -accept val
	   The optional TCP host and port to listen on for connections. If  not
	   specified, *:4433 is used.

       -unix val
	   Unix domain socket to accept on.

       -4  Use IPv4 only.

       -6  Use IPv6 only.

       -unlink
	   For -unix, unlink any existing socket first.

       -context val
	   Sets	 the  SSL context id. It can be given any string value. If this
	   option is not present a default value will be used.

       -verify int, -Verify int
	   The verify depth to use. This specifies the maximum	length	of  the
	   client  certificate chain and makes the server request a certificate
	   from the client. With the -verify option a certificate is  requested
	   but	the  client  does not have to send one, with the -Verify option
	   the client must supply a certificate or an error occurs.

	   If the cipher suite cannot request a client certificate (for example
	   an anonymous cipher suite or PSK) this option has no effect.

	   By default, validation of any supplied client  certificate  and  its
	   chain  is  done w.r.t. the (D)TLS Client ("sslclient") purpose.  For
	   details	  see	     "Certificate	 Extensions"	     in
	   openssl-verification-options(1).

       -cert infile
	   The	certificate  to use, most servers cipher suites require the use
	   of a certificate and some  require  a  certificate  with  a	certain
	   public  key	type:  for  example  the  DSS  cipher  suites require a
	   certificate containing a DSS (DSA) key. If not  specified  then  the
	   filename server.pem will be used.

       -cert2 infile
	   The	 certificate   file   to   use	 for   servername;  default  is
	   "server2.pem".

       -certform DER|PEM|P12
	   The server certificate file format;	unspecified  by	 default.   See
	   openssl-format-options(1) for details.

       -cert_chain
	   A  file  or	URI of untrusted certificates to use when attempting to
	   build the certificate chain related to the certificate specified via
	   the -cert option.  These untrusted certificates are sent to	clients
	   and	used  for  generating  certificate  status  (aka OCSP stapling)
	   requests.  The input can be in PEM, DER, or PKCS#12 format.

       -build_chain
	   Specify whether the application should build the server  certificate
	   chain to be provided to the client.

       -serverinfo val
	   A  file  containing	one or more blocks of PEM data.	 Each PEM block
	   must encode a TLS ServerHello  extension  (2	 bytes	type,  2  bytes
	   length,  followed  by  "length"  bytes  of  extension data).	 If the
	   client sends an empty TLS ClientHello extension matching  the  type,
	   the corresponding ServerHello extension will be returned.

       -key filename|uri
	   The	private	 key to use. If not specified then the certificate file
	   will be used.

       -key2 filename|uri
	   The private Key file to use for servername if not given via -cert2.

       -keyform DER|PEM|P12|ENGINE
	   The	   key	   format;     unspecified     by     default.	    See
	   openssl-format-options(1) for details.

       -pass val
	   The	private	 key  and  certificate	file password source.  For more
	   information	   about     the      format	  of	  val,	    see
	   openssl-passphrase-options(1).

       -dcert infile, -dkey filename|uri
	   Specify  an	additional certificate and private key, these behave in
	   the same manner as the -cert and -key options  except  there	 is  no
	   default if they are not specified (no additional certificate and key
	   is  used).  As  noted above some cipher suites require a certificate
	   containing a key of a  certain  type.  Some	cipher	suites	need  a
	   certificate	carrying  an RSA key and some a DSS (DSA) key. By using
	   RSA and DSS certificates and keys a server can support clients which
	   only support RSA or	DSS  cipher  suites  by	 using	an  appropriate
	   certificate.

       -dcert_chain
	   A  file  or	URI of untrusted certificates to use when attempting to
	   build the server certificate chain when a certificate specified  via
	   the	-dcert	option	is  in	use.   The input can be in PEM, DER, or
	   PKCS#12 format.

       -dcertform DER|PEM|P12
	   The format  of  the	additional  certificate	 file;	unspecified  by
	   default.  See openssl-format-options(1) for details.

       -dkeyform DER|PEM|P12|ENGINE
	   The	format	of  the additional private key; unspecified by default.
	   See openssl-format-options(1) for details.

       -dpass val
	   The passphrase for the additional private key and certificate.   For
	   more	    information	    about    the    format    of    val,    see
	   openssl-passphrase-options(1).

       -nbio_test
	   Tests non blocking I/O.

       -crlf
	   This option translated a line feed from the terminal into CR+LF.

       -debug
	   Print extensive debugging information including a hex  dump	of  all
	   traffic.

       -security_debug
	   Print output from SSL/TLS security framework.

       -security_debug_verbose
	   Print more output from SSL/TLS security framework

       -msg
	   Show all protocol messages with hex dump.

       -msgfile outfile
	   File to send output of -msg or -trace to, default standard output.

       -state
	   Prints the SSL session states.

       -CRL infile
	   The CRL file to use.

       -CRLform DER|PEM
	   The	  CRL	 file	 format;    unspecified	   by	default.    See
	   openssl-format-options(1) for details.

       -crl_download
	   Download CRLs from distribution points given in  CDP	 extensions  of
	   certificates

       -verifyCAfile filename
	   A file in PEM format containing trusted CA certificates (root and/or
	   intermediate) used to verify the client certificate chain.

       -verifyCApath dir
	   A  directory	 containing  trusted  certificates to use for verifying
	   client certificates.	 This directory must be in "hash  format",  see
	   openssl-verify(1) for more information.

       -verifyCAstore uri
	   The	URI  of	 a  store  containing  trusted	certificates to use for
	   verifying client certificates.

	   When any  of	 -verifyCAfile,	 -verifyCApath,	 or  -verifyCAstore  is
	   specified,  they  are loaded into a separate verification store (via
	   SSL_CTX_set1_verify_cert_store(3)) and used for  client  certificate
	   verification	 instead  of the store built from -CAfile, -CApath, and
	   -CAstore. Note that -CAfile is the sole source of acceptable issuing
	   CA names sent to the	 client	 in  the  Certificate  Request	message
	   during  the handshake; -CApath, -CAstore, and the -verifyCA* options
	   do not contribute to this list.

       -chainCAfile file
	   A file in PEM format containing trusted  certificates  to  use  when
	   attempting to build the server certificate chain.

       -chainCApath dir
	   A  directory containing trusted certificates to use for building the
	   server certificate chain provided to	 the  client.	This  directory
	   must	  be   in   "hash   format",  see  openssl-verify(1)  for  more
	   information.

       -chainCAstore uri
	   The URI of a	 store	containing  trusted  certificates  to  use  for
	   building  the  server certificate chain provided to the client.  The
	   URI may indicate a single certificate, as well as  a	 collection  of
	   them.  With URIs in the "file:" scheme, this acts as -chainCAfile or
	   -chainCApath,  depending  on	 if  the URI indicates a directory or a
	   single file.	 See ossl_store-file(7) for  more  information	on  the
	   "file:" scheme.

       -nocert
	   If  this  option  is set then no certificate is used. This restricts
	   the cipher suites available to the anonymous	 ones  (currently  just
	   anonymous DH).

       -quiet
	   Inhibit printing of session and certificate information.

       -no_resume_ephemeral
	   Disable caching and tickets if ephemeral (EC)DH is used.

       -tlsextdebug
	   Print a hex dump of any TLS extensions received from the server.

       -www
	   Sends  a  status  message  back to the client when it connects. This
	   includes information about the  ciphers  used  and  various	session
	   parameters.	The output is in HTML format so this option can be used
	   with	 a  web	 browser.  The special URL "/renegcert" turns on client
	   cert	 validation,  and  "/reneg"  tells  the	  server   to	request
	   renegotiation.

       -WWW, -HTTP
	   Emulates a simple web server. Pages will be resolved relative to the
	   current directory, for example if the URL "https://myhost/page.html"
	   is  requested  the file ./page.html will be sent.  If the -HTTP flag
	   is used, the files are sent directly, and should  contain  any  HTTP
	   response  headers  (including  status  response  line).  If the -WWW
	   option is used, the response headers are generated  by  the	server,
	   and	the  file  extension  is examined to determine the Content-Type
	   header.  Extensions of "html", "htm", and "php" are "text/html"  and
	   all	others are "text/plain".  In addition, the special URL "/stats"
	   will return status information like the -www option.

       -http_server_binmode
	   When acting as web-server (using option -WWW or  -HTTP)  open  files
	   requested by the client in binary mode.

       -no_ca_names
	   Disable  TLS	 Extension  CA	Names.	You  may want to disable it for
	   security  reasons  or  for  compatibility  with  some  Windows   TLS
	   implementations  crashing  when  this  extension is larger than 1024
	   bytes.

       -ignore_unexpected_eof
	   Some TLS implementations do	not  send  the	mandatory  close_notify
	   alert  on  shutdown.	 If  the  application  tries  to  wait	for the
	   close_notify alert  but  the	 peer  closes  the  connection	without
	   sending  it,	 an error is generated. When this option is enabled the
	   peer does not need to send  the  close_notify  alert	 and  a	 closed
	   connection  will  be	 treated  as  if  the  close_notify  alert  was
	   received.  For more information on shutting down a  connection,  see
	   SSL_shutdown(3).

       -servername
	   Servername for HostName TLS extension.

       -servername_fatal
	   On servername mismatch send fatal alert (default: warning alert).

       -id_prefix val
	   Generate  SSL/TLS session IDs prefixed by val. This is mostly useful
	   for testing any SSL/TLS code (e.g. proxies) that wish to  deal  with
	   multiple  servers,  when  each of which might be generating a unique
	   range of session IDs (e.g. with a certain prefix).

       -keymatexport
	   Export keying material using label.

       -keymatexportlen
	   Export the given number of bytes of keying material; default 20.

       -no_cache
	   Disable session cache.

       -ext_cache.
	   Disable internal cache, set up and use external cache.

       -verify_return_error
	   Verification errors normally just print  a  message	but  allow  the
	   connection  to  continue, for debugging purposes.  If this option is
	   used, then verification errors close the connection.

       -verify_quiet
	   No verify output except verify errors.

       -ign_eof
	   Ignore input EOF (default: when -quiet).

       -no_ign_eof
	   Do not ignore input EOF.

       -no_ems
	   Disable Extended master secret negotiation.

       -status
	   Enables certificate status request support (aka OCSP stapling).

       -status_verbose
	   Enables certificate status request support (aka OCSP	 stapling)  and
	   gives  a verbose printout of the OCSP response.  Use the -cert_chain
	   option to specify the certificate of the server's certificate signer
	   that is required for certificate status requests.

       -status_timeout int
	   Sets the timeout for OCSP response to int seconds.

       -proxy [http[s]://][userinfo@]host[:port][/path][?query][#fragment]
	   The HTTP(S) proxy server to use for reaching the OCSP server	 unless
	   -no_proxy  applies,	see  below.   If  the  host  string  is an IPv6
	   address, it must be	enclosed  in  "["  and	"]".   The  proxy  port
	   defaults  to 80 or 443 if the scheme is "https"; apart from that the
	   optional "http://" or "https://" prefix is ignored, as well	as  any
	   userinfo,  path,  query,  and  fragment components.	Defaults to the
	   environment variable "http_proxy" if set, else "HTTP_PROXY" in  case
	   no TLS is used, otherwise "https_proxy" if set, else "HTTPS_PROXY".

       -no_proxy addresses
	   List	 of  IP	 addresses  and/or  DNS	 names of servers not to use an
	   HTTP(S) proxy for, separated by commas and/or whitespace  (where  in
	   the	latter	case  the  whole  argument  must be enclosed in "...").
	   Default is from the environment variable  "no_proxy"	 if  set,  else
	   "NO_PROXY".

       -status_url val
	   Sets	 a fallback responder URL to use if no responder URL is present
	   in the server certificate. Without this option an error is  returned
	   if the server certificate does not contain a responder address.  The
	   optional  userinfo  and  fragment  URL  components are ignored.  Any
	   given query component is handled as part of the path component.

       -status_file infile
	   Overrides any OCSP responder URLs from the  certificate  and	 always
	   provides  the  OCSP Response stored in the file. The file must be in
	   DER format.

       -ssl_config val
	   Configure SSL_CTX using the given configuration value.

       -trace
	   Show verbose trace output of protocol messages.

       -brief
	   Provide a brief summary of  connection  parameters  instead	of  the
	   normal verbose output.

       -rev
	   Simple echo server that sends back received text reversed. Also sets
	   -brief.  Cannot be used in conjunction with -early_data.

       -async
	   Switch  on  asynchronous  mode.  Cryptographic  operations  will  be
	   performed asynchronously. This  will	 only  have  an	 effect	 if  an
	   asynchronous capable engine is also used via the -engine option. For
	   test	 purposes  the	dummy  async  engine  (dasync)	can be used (if
	   available).

       -max_send_frag +int
	   The	 maximum   size	  of	data	fragment    to	  send.	    See
	   SSL_CTX_set_max_send_fragment(3) for further information.

       -split_send_frag +int
	   The	size  used to split data for encrypt pipelines. If more data is
	   written in one go than  this	 value	then  it  will	be  split  into
	   multiple pipelines, up to the maximum number of pipelines defined by
	   max_pipelines.  This	 only  has an effect if a suitable cipher suite
	   has been negotiated, an engine that	supports  pipelining  has  been
	   loaded,    and    max_pipelines    is    greater    than    1.   See
	   SSL_CTX_set_split_send_fragment(3) for further information.

       -max_pipelines +int
	   The maximum number of encrypt/decrypt pipelines  to	be  used.  This
	   will	 only have an effect if an engine has been loaded that supports
	   pipelining (e.g. the dasync engine) and a suitable cipher suite  has
	   been	    negotiated.	    The	   default    value    is    1.	    See
	   SSL_CTX_set_max_pipelines(3) for further information.

       -naccept +int
	   The server  will  exit  after  receiving  the  specified  number  of
	   connections, default unlimited.

       -read_buf +int
	   The	default	 read buffer size to be used for connections. This will
	   only have an effect if the buffer size is larger than the size  that
	   would   otherwise   be   used   and	 pipelining   is  in  use  (see
	   SSL_CTX_set_default_read_buffer_len(3) for further information).

       -no_tx_cert_comp
	   Disables support for sending TLSv1.3 compressed certificates.

       -no_rx_cert_comp
	   Disables support for receiving TLSv1.3 compressed certificates.

       -no_comp
	   Disable negotiation of TLS  compression.   TLS  compression	is  not
	   recommended and is off by default as of OpenSSL 1.1.0.

       -num_tickets
	   Control  the number of tickets that will be sent to the client after
	   a full handshake in TLSv1.3. The default number  of	tickets	 is  2.
	   This	 option	 does  not  affect  the	 number of tickets sent after a
	   resumption handshake.

       -dhparam infile
	   The DH parameter  file  to  use.  The  ephemeral  DH	 cipher	 suites
	   generate keys using a set of DH parameters. If not specified then an
	   attempt  is	made to load the parameters from the server certificate
	   file.  If this fails then a static set of parameters hard coded into
	   this command will be used.

       -nbio
	   Turns on non blocking I/O.

       -timeout
	   Enable timeouts.

       -mtu
	   Set link-layer MTU.

       -psk_identity val
	   Expect the client to send PSK identity val when using a  PSK	 cipher
	   suite,  and	warn  if  they	do  not.   By default, the expected PSK
	   identity is the string "Client_identity".

       -psk_hint val
	   Use the PSK identity hint val when using a PSK cipher suite.

       -psk val
	   Use the PSK key val when using a PSK cipher suite. The key is  given
	   as  a  hexadecimal  number  without	leading	 0x,  for  example -psk
	   1a2b3c4d.  This option must be  provided  in	 order	to  use	 a  PSK
	   cipher.

       -psk_session file
	   Use	the pem encoded SSL_SESSION data stored in file as the basis of
	   a PSK.  Note that this will only work if TLSv1.3 is negotiated.

       -srpvfile
	   The verifier file for SRP.  This option is deprecated.

       -srpuserseed
	   A seed string for a default user salt.  This option is deprecated.

       -listen
	   This option can only be used in conjunction with  one  of  the  DTLS
	   options  above.  With this option, this command will listen on a UDP
	   port for incoming connections.  Any ClientHellos that arrive will be
	   checked to see if they have a cookie in them or not.	 Any without  a
	   cookie  will	 be  responded	to  with  a  HelloVerifyRequest.   If a
	   ClientHello with a cookie is received then this command will connect
	   to that peer and complete the handshake.

       -sctp
	   Use SCTP for the transport protocol instead of UDP in DTLS. Must  be
	   used	 in  conjunction with -dtls, -dtls1 or -dtls1_2. This option is
	   only available where OpenSSL has support for SCTP enabled.

       -sctp_label_bug
	   Use the incorrect behaviour of older	 OpenSSL  implementations  when
	   computing  endpoint-pair  shared  secrets for DTLS/SCTP. This allows
	   communication  with	older	broken	 implementations   but	 breaks
	   interoperability  with  correct  implementations.  Must  be	used in
	   conjunction with -sctp. This option is only available where	OpenSSL
	   has support for SCTP enabled.

       -use_srtp
	   Offer SRTP key management with a colon-separated profile list.

       -no_dhe
	   If  this  option  is	 set  then  no	DH  parameters	will  be loaded
	   effectively disabling the ephemeral DH cipher suites.

       -alpn val, -nextprotoneg val
	   These flags enable the  Application-Layer  Protocol	Negotiation  or
	   Next Protocol Negotiation (NPN) extension, respectively. ALPN is the
	   IETF	 standard  and replaces NPN.  The val list is a comma-separated
	   list of supported protocol names.  The list should contain the  most
	   desirable  protocols	 first.	  Protocol  names  are	printable ASCII
	   strings, for example "http/1.1" or "spdy/3".	 The flag -nextprotoneg
	   cannot be specified if -tls1_3 is used.

       -ktls
	   Enable Kernel TLS  for  sending  and	 receiving.   This  option  was
	   introduced  in  OpenSSL  3.2.0.   Kernel TLS is off by default as of
	   OpenSSL 3.2.0.

       -sendfile
	   If this option is set and KTLS is enabled,  SSL_sendfile()  will  be
	   used instead of BIO_write() to send the HTTP response requested by a
	   client.   This  option  is  only valid when -ktls along with -WWW or
	   -HTTP are specified.

       -zerocopy_sendfile
	   If this option is set, SSL_sendfile() will use the zerocopy TX mode,
	   which gives	a  performance	boost  when  used  with	 KTLS  hardware
	   offload.  Note  that invalid TLS records might be transmitted if the
	   file is changed while being sent.  This option depends on -sendfile;
	   when used alone, -sendfile is implied, and a warning is shown.  Note
	   that KTLS sendfile on FreeBSD always runs in the zerocopy mode.

       -keylogfile outfile
	   Appends  TLS secrets to the specified keylog file such that external
	   programs (like Wireshark) can decrypt TLS connections.

       -max_early_data int
	   Change the default maximum early data bytes that are	 specified  for
	   new	sessions  and any incoming early data (when used in conjunction
	   with the -early_data flag). The default value is approximately  16k.
	   The argument must be an integer greater than or equal to 0.

       -recv_max_early_data int
	   Specify  the	 hard  limit  on the maximum number of early data bytes
	   that will be accepted.

       -early_data
	   Accept early data where possible. Cannot be used in conjunction with
	   -www, -WWW, -HTTP or -rev.

       -stateless
	   Require TLSv1.3 cookies.

       -anti_replay, -no_anti_replay
	   Switches  replay  protection	 on  or	  off,	 respectively.	 Replay
	   protection  is  on  by  default unless overridden by a configuration
	   file. When it is on, OpenSSL will automatically detect if a	session
	   ticket  has	been  used more than once, TLSv1.3 has been negotiated,
	   and early data is enabled on the server. A full handshake is	 forced
	   if  a  session ticket is used a second or subsequent time. Any early
	   data that was sent will be rejected.

	   Note that the server manages an internal cache of  session  tickets.
	   If  a  client closes the connection without sending the close_notify
	   alert, the corresponding  session  ticket  is  removed  and	a  full
	   handshake is forced.

       -tfo
	   Enable acceptance of TCP Fast Open (RFC7413) connections.

       -cert_comp
	   Pre-compresses  certificates	 (RFC8879) that will be sent during the
	   handshake.

       -nameopt option
	   This specifies how the subject or issuer names are  displayed.   See
	   openssl-namedisplay-options(1) for details.

       -no_ssl3, -no_tls1, -no_tls1_1, -no_tls1_2, -no_tls1_3, -ssl3, -tls1,
       -tls1_1, -tls1_2, -tls1_3
	   See "TLS Version Options" in openssl(1).

       -dtls, -dtls1, -dtls1_2
	   These  specify  the	use  of	 DTLS instead of TLS.  See "TLS Version
	   Options" in openssl(1).

       -bugs, -comp, -no_comp, -no_ticket, -serverpref, -client_renegotiation,
       -legacy_renegotiation, -no_renegotiation, -no_resumption_on_reneg,
       -legacy_server_connect, -no_legacy_server_connect, -no_etm
       -allow_no_dhe_kex, -prefer_no_dhe_kex, -prioritize_chacha, -strict,
       -sigalgs algs, -client_sigalgs algs, -groups groups, -curves curves,
       -named_curve curve, -cipher ciphers, -ciphersuites 1.3ciphers,
       -min_protocol minprot, -max_protocol maxprot, -record_padding padding,
       -debug_broken_protocol, -no_middlebox
	   See	"SUPPORTED  COMMAND  LINE  COMMANDS"  in  SSL_CONF_cmd(3)   for
	   details.

       -xkey infile, -xcert file, -xchain file, -xchain_build file, -xcertform
       DER|PEM, -xkeyform DER|PEM
	   Set	 extended  certificate	verification  options.	 See  "Extended
	   Verification	  Options"   in	  openssl-verification-options(1)   for
	   details.

       -CAfile file, -no-CAfile, -CApath dir, -no-CApath, -CAstore uri,
       -no-CAstore
	   See "Trusted Certificate Options" in openssl-verification-options(1)
	   for details.

       -rand files, -writerand file
	   See "Random State Options" in openssl(1) for details.

       -engine id
	   See "Engine Options" in openssl(1).	This option is deprecated.

       -provider name
       -provider-path path
       -provparam [name:]key=value
       -propquery propq
	   See "Provider Options" in openssl(1), provider(7), and property(7).

       -allow_proxy_certs, -attime, -no_check_time, -check_ss_sig, -crl_check,
       -crl_check_all, -explicit_policy, -extended_crl, -ignore_critical,
       -inhibit_any, -inhibit_map, -no_alt_chains, -partial_chain, -policy,
       -policy_check, -policy_print, -purpose, -suiteB_128, -suiteB_128_only,
       -suiteB_192, -trusted_first, -use_deltas, -auth_level, -verify_depth,
       -verify_email, -verify_hostname, -verify_ip, -verify_name, -x509_strict
       -issuer_checks
	   Set	 various   options  of	certificate  chain  verification.   See
	   "Verification  Options"   in	  openssl-verification-options(1)   for
	   details.

	   If  the  server  requests  a	 client	 certificate, then verification
	   errors are displayed, for debugging, but the	 command  will	proceed
	   unless the -verify_return_error option is used.

       -enable_server_rpk
	   Enable  support for sending raw public keys (RFC7250) to the client.
	   A raw public key will be sent by the server,	 if  solicited	by  the
	   client,  provided  a	 suitable  key	and  public certificate pair is
	   configured.	Clients that don't support raw public keys or prefer to
	   use X.509 certificates can still elect to receive X.509 certificates
	   as usual.

	   Raw	 public	  keys	  are	 extracted    from    the    configured
	   certificate/private key.

       -enable_client_rpk
	   Enable  support  for	 receiving  raw	 public keys (RFC7250) from the
	   client.  Use of X.509 certificates by the client  becomes  optional,
	   and	clients	 that  support	raw  public keys may elect to use them.
	   Clients that don't support raw public keys or prefer	 to  use  X.509
	   certificates can still elect to send X.509 certificates as usual.

	   Raw	  public    keys    are	   extracted	from   the   configured
	   certificate/private key.

CONNECTED COMMANDS
       If a connection request is established with an SSL  client  and	neither
       the  -www  nor  the  -WWW  option  has  been used then normally any data
       received from the client is displayed and any key presses will  be  sent
       to the client.

       Certain	commands  are also recognized which perform special operations.
       These commands are a letter which must appear at the start  of  a  line.
       They are listed below.

       q   End the current SSL connection but still accept new connections.

       Q   End the current SSL connection and exit.

       r   Renegotiate the SSL session (TLSv1.2 and below only).

       R   Renegotiate	the  SSL  session  and	request	 a  client  certificate
	   (TLSv1.2 and below only).

       P   Send some plain text down the underlying TCP connection: this should
	   cause the client to disconnect due to a protocol violation.

       S   Print out some session cache status information.

       k   Send a key update message to the client (TLSv1.3 only)

       K   Send a key update  message  to  the	client	and  request  one  back
	   (TLSv1.3 only)

       c   Send a certificate request to the client (TLSv1.3 only)

NOTES
       This  command  can  be  used to debug SSL clients. To accept connections
       from a web browser the command:

	openssl s_server -accept 443 -www

       can be used for example.

       Although specifying an empty  list  of  CAs  when  requesting  a	 client
       certificate  is strictly speaking a protocol violation, some SSL clients
       interpret this to  mean	any  CA	 is  acceptable.  This	is  useful  for
       debugging purposes.

       The  session  parameters	 can  printed  out using the openssl-sess_id(1)
       command.

BUGS
       Because this program has a lot of options and also because some	of  the
       techniques  used are rather old, the C source for this command is rather
       hard to read and not a model of how things should be  done.   A	typical
       SSL server program would be much simpler.

       The output of common ciphers is wrong: it just gives the list of ciphers
       that OpenSSL recognizes and the client supports.

       There  should  be  a  way  for  this command to print out details of any
       unknown cipher suites a client says it supports.

SEE ALSO
       openssl(1), openssl-sess_id(1), openssl-s_client(1), openssl-ciphers(1),
       SSL_CONF_cmd(3),			      SSL_CTX_set_max_send_fragment(3),
       SSL_CTX_set_split_send_fragment(3),	  SSL_CTX_set_max_pipelines(3),
       ossl_store-file(7)

HISTORY
       The -no_alt_chains option was added in OpenSSL 1.1.0.

       The -allow-no-dhe-kex  and  -prioritize_chacha  options	were  added  in
       OpenSSL 1.1.1.

       The  -srpvfile,	-srpuserseed,  and  -engine  option  were deprecated in
       OpenSSL 3.0.

       The    -enable_client_rpk,     -enable_server_rpk,     -no_rx_cert_comp,
       -no_tx_cert_comp, and -tfo options were added in OpenSSL 3.2.

COPYRIGHT
       Copyright 2000-2026 The OpenSSL Project Authors. All Rights Reserved.

       Licensed	 under the Apache License 2.0 (the "License").	You may not use
       this file except in compliance with the License.	 You can obtain a  copy
       in    the    file   LICENSE   in	  the	source	 distribution	or   at
       <https://www.openssl.org/source/license.html>.

3.5.7				   2026-06-09		 OPENSSL-S_SERVER(1SSL)