search..
No manual entry for -- in section 1
SYSTEMD-CGTOP(1)		 systemd-cgtop		       SYSTEMD-CGTOP(1)

NAME
       systemd-cgtop - Show top control groups by their resource usage

SYNOPSIS

       systemd-cgtop [OPTIONS...] [GROUP]

DESCRIPTION
       systemd-cgtop shows the top control groups of the local Linux control
       group hierarchy, ordered by their CPU, memory, or disk I/O load. The
       display is refreshed in regular intervals (by default every 1s), similar
       in style to top(1). If a control group path is specified, shows only the
       services of the specified control group.

       If systemd-cgtop is not connected to a tty, no column headers are
       printed and the default is to only run one iteration. The --iterations=
       argument, if given, is honored. This mode is suitable for scripting.

       Resource usage is only accounted for control groups with the appropriate
       controllers turned on: "cpu" controller for CPU usage, "memory"
       controller for memory usage, and "io" controller for disk I/O
       consumption. If resource monitoring for these resources is required, it
       is recommended to add the CPUAccounting=1, MemoryAccounting=1 and
       IOAccounting=1 settings in the unit files in question. See
       systemd.resource-control(5) for details.

       The CPU load value can be between 0 and 100 times the number of
       processors the system has. For example, if the system has 8 processors,
       the CPU load value is going to be between 0% and 800%. The number of
       processors can be found in "/proc/cpuinfo".

       To emphasize: unless "CPUAccounting=1", "MemoryAccounting=1", and
       "IOAccounting=1" are enabled for the services in question, no resource
       accounting will be available for system services and the data shown by
       systemd-cgtop will be incomplete.

OPTIONS
       The following options are understood:

       -p, --order=path
	   Order by control group path name.

       -t, --order=tasks
	   Order by number of tasks/processes in the control group.

       -c, --order=cpu
	   Order by CPU load.

       -m, --order=memory
	   Order by memory usage.

       -i, --order=io
	   Order by disk I/O load.

       -b, --batch
	   Run in "batch" mode: do not accept input and run until the iteration
	   limit set with --iterations= is exhausted or until killed. This mode
	   could be useful for sending output from systemd-cgtop to other
	   programs or to a file.

	   Added in version 188.

       -r, --raw
	   Format byte counts (as in memory usage and I/O metrics) and CPU time
	   with raw numeric values rather than human-readable numbers.

	   Added in version 221.

       --cpu=percentage, --cpu=time
	   Controls whether the CPU usage is shown as percentage or time. By
	   default, the CPU usage is shown as percentage. This setting may also
	   be toggled at runtime by pressing the % key.

	   Added in version 226.

       -P
	   Count only userspace processes instead of all tasks. By default, all
	   tasks are counted: each kernel thread and each userspace thread
	   individually. With this setting, kernel threads are excluded from
	   the count and each userspace process only counts as one task,
	   regardless of how many threads it consists of. This setting may also
	   be toggled at runtime by pressing the P key. This option may not be
	   combined with -k.

	   Added in version 227.

       -k
	   Count only userspace processes and kernel threads instead of all
	   tasks. By default, all tasks are counted: each kernel thread and
	   each userspace thread individually. With this setting, kernel
	   threads are included in the count and each userspace process only
	   counts as one task, regardless of how many threads it consists of.
	   This setting may also be toggled at runtime by pressing the k key.
	   This option may not be combined with -P.

	   Added in version 226.

       --recursive=
	   Controls whether the number of processes shown for a control group
	   shall include all processes that are contained in any of the child
	   control groups as well. Takes a boolean argument, which defaults to
	   "yes". If enabled, the processes in child control groups are
	   included, if disabled, only the processes in the control group
	   itself are counted. This setting may also be toggled at runtime by
	   pressing the r key. Note that this setting only applies to process
	   counting, i.e. when the -P or -k options are used. It has no effect
	   if all tasks are counted, in which case the counting is always
	   recursive.

	   Added in version 226.

       -n, --iterations=
	   Perform only this many iterations. A value of 0 indicates that the
	   program should run indefinitely.

	   Added in version 188.

       -1
	   A shortcut for --iterations=1.

	   Added in version 238.

       -d, --delay=
	   Specify refresh delay in seconds (or if one of "ms", "us", "min" is
	   specified as unit in this time unit). This setting may also be
	   increased and decreased at runtime by pressing the + and - keys.

       --depth=
	   Maximum control group tree traversal depth. Specifies how deep
	   systemd-cgtop shall traverse the control group hierarchies. If 0 is
	   specified, only the root group is monitored. For 1, only the first
	   level of control groups is monitored, and so on. Defaults to 3.

       -M MACHINE, --machine=MACHINE
	   Limit control groups shown to the part corresponding to the
	   container MACHINE. This option may not be used when a control group
	   path is specified.

	   Added in version 227.

       -h, --help
	   Print a short help text and exit.

       --version
	   Print a short version string and exit.

KEYS
       systemd-cgtop is an interactive tool and may be controlled via user
       input using the following keys:

       h
	   Shows a short help text.

       Space
	   Immediately refresh output.

	   Added in version 226.

       q
	   Terminate the program.

       p, t, c, m, i
	   Sort the control groups by path, number of tasks, CPU load, memory
	   usage, or I/O load, respectively. This setting may also be
	   controlled using the --order= command line switch.

       %
	   Toggle between showing CPU time as time or percentage. This setting
	   may also be controlled using the --cpu= command line switch.

	   Added in version 201.

       +, -
	   Increase or decrease refresh delay, respectively. This setting may
	   also be controlled using the --delay= command line switch.

       P
	   Toggle between counting all tasks, or only userspace processes. This
	   setting may also be controlled using the -P command line switch (see
	   above).

	   Added in version 227.

       k
	   Toggle between counting all tasks, or only userspace processes and
	   kernel threads. This setting may also be controlled using the -k
	   command line switch (see above).

	   Added in version 226.

       r
	   Toggle between recursively including or excluding processes in child
	   control groups in control group process counts. This setting may
	   also be controlled using the --recursive= command line switch. This
	   key is not available if all tasks are counted, it is only available
	   if processes are counted, as enabled with the P or k keys.

	   Added in version 226.

EXIT STATUS
       On success, 0 is returned, a non-zero failure code otherwise.

SEE ALSO
       systemd(1), systemctl(1), systemd-cgls(1), systemd.resource-control(5),
       top(1)

systemd 257.13						       SYSTEMD-CGTOP(1)