search..
No manual entry for -- in section 1
SENDMAIL(1)		    General Commands Manual		    SENDMAIL(1)

NAME
       sendmail - Postfix to Sendmail compatibility interface

SYNOPSIS
       sendmail [option ...] [recipient ...]

       mailq
       sendmail -bp

       newaliases
       sendmail -I

DESCRIPTION
       The  Postfix sendmail(1) command implements the Postfix to Sendmail com-
       patibility interface.  For the sake of compatibility with  existing  ap-
       plications,  some  Sendmail  command-line  options  are	recognized  but
       silently ignored.

       By default, Postfix sendmail(1) reads a message from standard input  un-
       til  EOF	 or until it reads a line with only a . character, and arranges
       for delivery.  Postfix sendmail(1) relies on the postdrop(1) command  to
       create a queue file in the maildrop directory.

       Specific	 command  aliases are provided for other common modes of opera-
       tion:

       mailq  List the mail queue. Each entry shows the queue file ID,	message
	      size, arrival time, sender, and the recipients that still need to
	      be  delivered.   If mail could not be delivered upon the last at-
	      tempt, the reason for failure is shown. The queue	 ID  string  is
	      followed by an optional status character:

	      *	     The  message  is  in the active queue, i.e. the message is
		     selected for delivery.

	      !	     The message is in the hold queue, i.e. no further delivery
		     attempt will be made until the mail is taken off hold.

	      #	     The message is forced to expire. See the postsuper(1)  op-
		     tions -e or -f.

	      This   mode   of	 operation  is	implemented  by	 executing  the
	      postqueue(1) command.

       newaliases
	      Initialize the alias database.  If no  input  file  is  specified
	      (with  the  -oA  option,	see  below),  the program processes the
	      file(s) specified with the alias_database	 configuration	parame-
	      ter.   If	 no  alias database type is specified, the program uses
	      the type specified with the  default_database_type  configuration
	      parameter.   This mode of operation is implemented by running the
	      postalias(1) command.

	      Note: it may take a minute or so before an alias database	 update
	      becomes  visible.	 Use  the "postfix reload" command to eliminate
	      this delay.

       These and other features can be selected by specifying  the  appropriate
       combination of command-line options. Some features are controlled by pa-
       rameters in the main.cf configuration file.

       The following options are recognized:

       -Am (ignored)

       -Ac (ignored)
	      Postfix  sendmail	 uses the same configuration file regardless of
	      whether or not a message is an initial submission.

       -B body_type
	      The message body MIME type: 7BIT or 8BITMIME.

       -bd    Go into daemon mode. This mode of operation is implemented by ex-
	      ecuting the "postfix start" command.

       -bh (ignored)

       -bH (ignored)
	      Postfix has no persistent host status database.

       -bi    Initialize alias database. See the newaliases command above.

       -bl    Go into daemon mode. To accept only  local  connections  as  with
	      Sendmail's  -bl  option,	specify "inet_interfaces = loopback" in
	      the Postfix main.cf configuration file.

       -bm    Read mail from standard input and arrange for delivery.  This  is
	      the default mode of operation.

       -bp    List the mail queue. See the mailq command above.

       -bs    Stand-alone  SMTP	 server	 mode. Read SMTP commands from standard
	      input, and write responses to standard  output.	In  stand-alone
	      SMTP  server  mode,  mail	 relaying and other access controls are
	      disabled by default. To enable  them,  run  the  process	as  the
	      mail_owner user.

	      This  mode  of  operation	 is implemented by running the smtpd(8)
	      daemon.

       -bv    Do not collect or deliver a message. Instead, send an  email  re-
	      port  after verifying each recipient address.  This is useful for
	      testing address rewriting and routing configurations.

	      This feature is available in Postfix version 2.1 and later.

       -C config_file

       -C config_dir
	      The path name of the Postfix main.cf file, or of its  parent  di-
	      rectory. This information is ignored with Postfix versions before
	      2.3.

	      With  Postfix version 3.2 and later, a non-default directory must
	      be authorized in the default main.cf  file,  through  the	 alter-
	      nate_config_directories or multi_instance_directories parameters.

	      With  all	 Postfix versions, you can specify a directory pathname
	      with the MAIL_CONFIG environment variable to override  the  loca-
	      tion of configuration files.

       -F full_name
	      Set  the	sender	full  name. This overrides the NAME environment
	      variable, and is used only with messages that have no From:  mes-
	      sage header.

       -f sender
	      Set the envelope sender address. This is the address where deliv-
	      ery  problems  are sent to. With Postfix versions before 2.1, the
	      Errors-To: message header overrides the error return address.

       -G     Gateway (relay) submission, as opposed to	 initial  user	submis-
	      sion.   Either  do not rewrite addresses at all, or update incom-
	      plete addresses with the domain information  specified  with  re-
	      mote_header_rewrite_domain.

	      This option is ignored before Postfix version 2.3.

       -h hop_count (ignored)
	      Hop  count  limit. Use the hopcount_limit configuration parameter
	      instead.

       -I     Initialize alias database. See the newaliases command above.

       -i     When reading a message from standard input, don't	 treat	a  line
	      with only a . character as the end of input.

       -L label (ignored)
	      The  logging  label.  Use the syslog_name configuration parameter
	      instead.

       -m (ignored)
	      Backwards compatibility.

       -N dsn (default: 'delay, failure')
	      Delivery status notification control. Specify either a comma-sep-
	      arated list with one or more of failure (send  notification  when
	      delivery	fails),	 delay	(send notification when delivery is de-
	      layed), or success (send notification when the message is	 deliv-
	      ered); or specify never (don't send any notifications at all).

	      This feature is available in Postfix 2.3 and later.

       -n (ignored)
	      Backwards compatibility.

       -oAalias_database
	      Non-default  alias  database.  Specify pathname or type:pathname.
	      See postalias(1) for details.

       -O option=value (ignored)
	      Set the named option to value. Use the  equivalent  configuration
	      parameter in main.cf instead.

       -o7 (ignored)

       -o8 (ignored)
	      To send 8-bit or binary content, use an appropriate MIME encapsu-
	      lation and specify the appropriate -B command-line option.

       -oi    When  reading  a	message from standard input, don't treat a line
	      with only a . character as the end of input.

       -om (ignored)
	      The sender is never eliminated from alias etc. expansions.

       -o x value (ignored)
	      Set option x to value. Use the equivalent configuration parameter
	      in main.cf instead.

       -r sender
	      Set the envelope sender address. This is the address where deliv-
	      ery problems are sent to. With Postfix versions before  2.1,  the
	      Errors-To: message header overrides the error return address.

       -R return
	      Delivery	status	notification control.  Specify "hdrs" to return
	      only the header when a message bounces, "full" to return	a  full
	      copy (the default behavior).

	      The  -R option specifies an upper bound; Postfix will return only
	      the header, when a full copy would exceed	 the  bounce_size_limit
	      setting.

	      This option is ignored before Postfix version 2.10.

       -q     Attempt  to  deliver all queued mail. This is implemented by exe-
	      cuting the postqueue(1) command.

	      Warning: flushing undeliverable mail frequently  will  result  in
	      poor delivery performance of all other mail.

       -qinterval (ignored)
	      The interval between queue runs. Use the queue_run_delay configu-
	      ration parameter instead.

       -qIqueueid
	      Schedule	immediate delivery of mail with the specified queue ID.
	      This option is implemented by executing the postqueue(1) command,
	      and is available with Postfix version 2.4 and later.

       -qRsite
	      Schedule immediate delivery of all mail that is  queued  for  the
	      named site. This option accepts only site names that are eligible
	      for the "fast flush" service, and is implemented by executing the
	      postqueue(1)  command.   See  flush(8) for more information about
	      the "fast flush" service.

       -qSsite
	      This command is not implemented. Use  the	 slower	 "sendmail  -q"
	      command instead.

       -t     Extract  recipients  from message headers. These are added to any
	      recipients specified on the command line.

	      With Postfix versions prior to 2.1, this option requires that  no
	      recipient addresses are specified on the command line.

       -U (ignored)
	      Initial user submission.

       -V envid
	      Specify  the envelope ID for notification by servers that support
	      DSN.

	      This feature is available in Postfix 2.3 and later.

       -XV (Postfix 2.2 and earlier: -V)
	      Variable Envelope Return Path. Given an envelope	sender	address
	      of the form owner-listname@origin, each recipient user@domain re-
	      ceives mail with a personalized envelope sender address.

	      By   default,   the   personalized  envelope  sender  address  is
	      owner-listname+user=domain@origin. The default + and = characters
	      are configurable with the	 default_verp_delimiters  configuration
	      parameter.

       -XVxy (Postfix 2.2 and earlier: -Vxy)
	      As  -XV,	but  uses x and y as the VERP delimiter characters, in-
	      stead of the characters specified	 with  the  default_verp_delim-
	      iters configuration parameter.

       -v     Send  an email report of the first delivery attempt (Postfix ver-
	      sions 2.1 and later). Mail delivery always happens in  the  back-
	      ground.  When  multiple -v options are given, enable verbose log-
	      ging for debugging purposes.

       -X log_file (ignored)
	      Log mailer traffic. Use the debug_peer_list and  debug_peer_level
	      configuration parameters instead.

SECURITY
       By  design,  this program is not set-user (or group) id.	 It is prepared
       to handle message content from untrusted, possibly remote, users.

       However, like most Postfix programs, this program does not enforce a se-
       curity policy on its command-line arguments.  Instead, it relies on  the
       UNIX  system  to enforce access policies based on the effective user and
       group IDs of the process. Concretely, this means	 that  running	Postfix
       commands	 as root (from sudo or equivalent) on behalf of a non-root user
       is likely to create privilege escalation opportunities.

       If an application runs any Postfix programs on behalf of users  that  do
       not  have normal shell access to Postfix commands, then that application
       MUST restrict user-specified command-line arguments to  avoid  privilege
       escalation.

       o      Filter  all  command-line	 arguments,  for example arguments that
	      contain a pathname or that  specify  a  database	access	method.
	      These  pathname  checks  must  reject user-controlled symlinks or
	      hardlinks to sensitive files, and must not be vulnerable to  TOC-
	      TOU race attacks.

       o      Disable command options processing for all command arguments that
	      contain user-specified data. For example, the Postfix sendmail(1)
	      command line MUST be structured as follows:

		  /path/to/sendmail system-arguments -- user-arguments

	      Here,  the  "--"	disables  command  option  processing  for  all
	      user-arguments that follow.

	      Without the "--", a malicious user  could	 enable	 Postfix  send-
	      mail(1)  command	options,  by  specifying  an email address that
	      starts with "-".

DIAGNOSTICS
       Problems are logged to syslogd(8) or postlogd(8), and  to  the  standard
       error stream.

ENVIRONMENT
       MAIL_CONFIG
	      Directory with Postfix configuration files.

       MAIL_VERBOSE (value does not matter)
	      Enable verbose logging for debugging purposes.

       MAIL_DEBUG (value does not matter)
	      Enable  debugging with an external command, as specified with the
	      debugger_command configuration parameter.

       NAME   The sender full name. This is used only with messages  that  have
	      no From: message header. See also the -F option above.

CONFIGURATION PARAMETERS
       The  following  main.cf	parameters are especially relevant to this pro-
       gram.  The text below provides only a parameter summary. See postconf(5)
       for more details including examples.

COMPATIBILITY CONTROLS
       Available with Postfix 2.9 and later:

       sendmail_fix_line_endings (always)
	      Controls how the Postfix sendmail command converts email	message
	      line endings from <CR><LF> into UNIX format (<LF>).

TROUBLE SHOOTING CONTROLS
       The  DEBUG_README  file	gives examples of how to troubleshoot a Postfix
       system.

       debugger_command (empty)
	      The external command to execute when a Postfix daemon program  is
	      invoked with the -D option.

       debug_peer_level (2)
	      The  increment  in  verbose logging level when a nexthop destina-
	      tion, remote client or server name or network address  matches  a
	      pattern given with the debug_peer_list parameter.

       debug_peer_list (empty)
	      Optional	list  of  nexthop  destination, remote client or server
	      name or network address patterns that, if matched, cause the ver-
	      bose logging level to increase by the amount  specified  in  $de-
	      bug_peer_level.

ACCESS CONTROLS
       Available in Postfix version 2.2 and later:

       authorized_flush_users (static:anyone)
	      List of users who are authorized to flush the queue.

       authorized_mailq_users (static:anyone)
	      List of users who are authorized to view the queue.

       authorized_submit_users (static:anyone)
	      List  of	users  who are authorized to submit mail with the send-
	      mail(1) command (and with the privileged postdrop(1) helper  com-
	      mand).

RESOURCE AND RATE CONTROLS
       bounce_size_limit (50000)
	      The  maximal  amount  of	original message text that is sent in a
	      non-delivery notification.

       fork_attempts (5)
	      The maximal number of attempts to fork() a child process.

       fork_delay (1s)
	      The delay between attempts to fork() a child process.

       hopcount_limit (50)
	      The maximal number of Received:  message headers that is	allowed
	      in the primary message headers.

       queue_run_delay (300s)
	      The time between deferred queue scans by the queue manager; prior
	      to Postfix 2.4 the default value was 1000s.

FAST FLUSH CONTROLS
       The  ETRN_README	 file describes configuration and operation details for
       the Postfix "fast flush" service.

       fast_flush_domains ($relay_domains)
	      Optional list of destinations that are eligible for  per-destina-
	      tion logfiles with mail that is queued to those destinations.

VERP CONTROLS
       The  VERP_README	 file  describes configuration and operation details of
       Postfix support for variable envelope return path addresses.

       default_verp_delimiters (+=)
	      The two default VERP delimiter characters.

       verp_delimiter_filter (-=+)
	      The characters Postfix accepts as VERP  delimiter	 characters  on
	      the Postfix sendmail(1) command line and in SMTP commands.

MISCELLANEOUS CONTROLS
       alias_database (see 'postconf -d' output)
	      The  alias  databases for local(8) delivery that are updated with
	      "newaliases" or with "sendmail -bi".

       command_directory (see 'postconf -d' output)
	      The location of all postfix administrative commands.

       config_directory (see 'postconf -d' output)
	      The default location of the Postfix main.cf and master.cf config-
	      uration files.

       daemon_directory (see 'postconf -d' output)
	      The directory with Postfix support programs and daemon programs.

       default_database_type (see 'postconf -d' output)
	      The default database type for use in newaliases(1),  postalias(1)
	      and postmap(1) commands.

       delay_warning_time (0h)
	      The  time	 after	which the sender receives a copy of the message
	      headers of mail that is still queued.

       import_environment (see 'postconf -d' output)
	      The list of  environment	variables  that	 a  privileged	Postfix
	      process  will  import  from  a  non-Postfix  parent  process,  or
	      name=value environment overrides.

       mail_owner (postfix)
	      The UNIX system account that owns	 the  Postfix  queue  and  most
	      Postfix daemon processes.

       queue_directory (see 'postconf -d' output)
	      The location of the Postfix top-level queue directory.

       remote_header_rewrite_domain (empty)
	      Rewrite or add message headers in mail from remote clients if the
	      remote_header_rewrite_domain parameter value is non-empty, updat-
	      ing  incomplete  addresses  with	the domain specified in the re-
	      mote_header_rewrite_domain parameter, and adding missing headers.

       syslog_facility (mail)
	      The syslog facility of Postfix logging.

       syslog_name (see 'postconf -d' output)
	      A prefix that is prepended to the process name in syslog records,
	      so that, for example, "smtpd" becomes "prefix/smtpd".

       Postfix 3.2 and later:

       alternate_config_directories (empty)
	      A list of non-default Postfix configuration directories that  may
	      be  specified  with "-c config_directory" on the command line (in
	      the case of sendmail(1),	with  the  "-C"	 option),  or  via  the
	      MAIL_CONFIG environment parameter.

       multi_instance_directories (empty)
	      An  optional  list  of non-default Postfix configuration directo-
	      ries; these directories belong to	 additional  Postfix  instances
	      that  share  the	Postfix executable files and documentation with
	      the default Postfix instance,  and  that	are  started,  stopped,
	      etc., together with the default Postfix instance.

FILES
       /var/spool/postfix, mail queue
       /etc/postfix, configuration files

SEE ALSO
       pickup(8), mail pickup daemon
       qmgr(8), queue manager
       smtpd(8), SMTP server
       flush(8), fast flush service
       postsuper(1), queue maintenance
       postalias(1), create/update/query alias database
       postdrop(1), mail posting utility
       postfix(1), mail system control
       postqueue(1), mail queue control
       postlogd(8), Postfix logging
       syslogd(8), system logging

README_FILES
       Use  "postconf  readme_directory" or "postconf html_directory" to locate
       this information.
       DEBUG_README, Postfix debugging howto
       ETRN_README, Postfix ETRN howto
       VERP_README, Postfix VERP howto

LICENSE
       The Secure Mailer license must be distributed with this software.

AUTHOR(S)
       Wietse Venema
       IBM T.J. Watson Research
       P.O. Box 704
       Yorktown Heights, NY 10598, USA

       Wietse Venema
       Google, Inc.
       111 8th Avenue
       New York, NY 10011, USA

								    SENDMAIL(1)