search..
No manual entry for -- in section 1
POSTQUEUE(1)		    General Commands Manual		   POSTQUEUE(1)

NAME
       postqueue - Postfix queue control

SYNOPSIS
   To flush the mail queue:

       postqueue [-v] [-c config_dir] -f

       postqueue [-v] [-c config_dir] -i queue_id

       postqueue [-v] [-c config_dir] -s site

   To list the mail queue:

       postqueue [-v] [-c config_dir] -j

       postqueue [-v] [-c config_dir] -p

DESCRIPTION
       The postqueue(1) command implements the Postfix user interface for queue
       management.  It	implements  operations that are traditionally available
       via the sendmail(1) command.  See the postsuper(1) command for queue op-
       erations that require super-user privileges such as deleting  a	message
       from the queue or changing the status of a message.

       The following options are recognized:

       -c config_dir
	      The  main.cf configuration file is in the named directory instead
	      of the default configuration directory. See also the  MAIL_CONFIG
	      environment setting below.

       -f     Flush the queue: attempt to deliver all queued mail.

	      This  option implements the traditional "sendmail -q" command, by
	      contacting the Postfix qmgr(8) daemon.

	      Warning: flushing undeliverable mail frequently  will  result  in
	      poor delivery performance of all other mail.

       -i queue_id
	      Schedule	immediate  delivery of deferred mail with the specified
	      queue ID.

	      This option implements the traditional sendmail -qI  command,  by
	      contacting the flush(8) server.

	      This feature is available with Postfix version 2.4 and later.

       -j     Produce  a  queue	 listing  in JSON LINES format, based on output
	      from the showq(8) daemon. See "JSON OBJECT FORMAT" below for  de-
	      tails.

	      This feature is available in Postfix 3.1 and later.

       -p     Produce  a traditional sendmail-style queue listing.  This option
	      implements the traditional mailq command, by contacting the Post-
	      fix showq(8) daemon.

	      Each queue entry shows the queue file ID, message	 size,	arrival
	      time, sender, and the recipients that still need to be delivered.
	      If  mail could not be delivered upon the last attempt, the reason
	      for failure is shown. The queue ID string is followed by	an  op-
	      tional status character:

	      *	     The  message  is  in the active queue, i.e. the message is
		     selected for delivery.

	      !	     The message is in the hold queue, i.e. no further delivery
		     attempt will be made until the mail is taken off hold.

	      #	     The message is forced to expire. See the postsuper(1)  op-
		     tions -e or -f.

		     This feature is available in Postfix 3.5 and later.

       -s site
	      Schedule	immediate  delivery  of all mail that is queued for the
	      named site. A numerical site must be specified  as  a  valid  RFC
	      5321  address  literal  enclosed	in  [],	 just like in email ad-
	      dresses.	The site must be eligible for the "fast flush" service.
	      See flush(8) for more information about the "fast flush" service.

	      This option implements the traditional  "sendmail	 -qRsite"  com-
	      mand, by contacting the Postfix flush(8) daemon.

       -v     Enable  verbose  logging	for debugging purposes. Multiple -v op-
	      tions make the software increasingly verbose. As of Postfix  2.3,
	      this option is available for the super-user only.

JSON OBJECT FORMAT
       Each  JSON  object  represents one queue file; it is emitted as a single
       text line followed by a newline character.

       Object members have string values unless indicated otherwise.   Programs
       should  ignore object members that are not listed here; the list of mem-
       bers is expected to grow over time.

       queue_name
	      The name of the queue where the message was found.  Note that the
	      contents of the mail queue may change while it is	 being	listed;
	      some messages may appear more than once, and some messages may be
	      missed.

       queue_id
	      The  queue file name. The queue_id may be reused within a Postfix
	      instance unless "enable_long_queue_ids = true" and time is monot-
	      onic.  Even then, the queue_id is not expected to be  unique  be-
	      tween different Postfix instances.  Management tools that require
	      a	 unique	 name  should  combine the queue_id with the myhostname
	      setting of the Postfix instance.

       arrival_time
	      The number of seconds since the start of the UNIX epoch.

       message_size
	      The number of bytes in the message header and body.  This	 number
	      does  not	 include  message  envelope information. It is approxi-
	      mately equal to the number of bytes that would be transmitted via
	      SMTP including the <CR><LF> line endings.

       forced_expire
	      The message is forced to expire (true or false).	See the postsu-
	      per(1) options -e or -f.

	      This feature is available in Postfix 3.5 and later.

       sender The envelope sender address.

       recipients
	      An array containing zero or more objects with members:

	      address
		     One recipient address.

	      delay_reason
		     If present, the reason for delayed delivery.  Delayed  re-
		     cipients  may have no delay reason, for example, while de-
		     livery is in progress, or after the system was stopped be-
		     fore it could record the reason.

SECURITY
       This program is designed to run with set-group ID privileges, so that it
       can connect to Postfix daemon processes.

STANDARDS
       RFC 7159 (JSON notation)

DIAGNOSTICS
       Problems are logged to syslogd(8) or postlogd(8), and  to  the  standard
       error stream.

ENVIRONMENT
       MAIL_CONFIG
	      Directory	 with  the main.cf file. In order to avoid exploitation
	      of set-group ID privileges, a non-standard directory  is	allowed
	      only if:

	      o	     The  name	is listed in the standard main.cf file with the
		     alternate_config_directories configuration parameter.

	      o	     The command is invoked by the super-user.

CONFIGURATION PARAMETERS
       The following main.cf parameters are especially relevant	 to  this  pro-
       gram.  The text below provides only a parameter summary. See postconf(5)
       for more details including examples.

       alternate_config_directories (empty)
	      A	 list of non-default Postfix configuration directories that may
	      be specified with "-c config_directory" on the command  line  (in
	      the  case	 of  sendmail(1),  with	 the  "-C"  option), or via the
	      MAIL_CONFIG environment parameter.

       config_directory (see 'postconf -d' output)
	      The default location of the Postfix main.cf and master.cf config-
	      uration files.

       command_directory (see 'postconf -d' output)
	      The location of all postfix administrative commands.

       fast_flush_domains ($relay_domains)
	      Optional list of destinations that are eligible for  per-destina-
	      tion logfiles with mail that is queued to those destinations.

       import_environment (see 'postconf -d' output)
	      The  list	 of  environment  variables  that  a privileged Postfix
	      process  will  import  from  a  non-Postfix  parent  process,  or
	      name=value environment overrides.

       queue_directory (see 'postconf -d' output)
	      The location of the Postfix top-level queue directory.

       syslog_facility (mail)
	      The syslog facility of Postfix logging.

       syslog_name (see 'postconf -d' output)
	      A prefix that is prepended to the process name in syslog records,
	      so that, for example, "smtpd" becomes "prefix/smtpd".

       trigger_timeout (10s)
	      The time limit for sending a trigger to a Postfix daemon (for ex-
	      ample, the pickup(8) or qmgr(8) daemon).

       Available in Postfix version 2.2 and later:

       authorized_flush_users (static:anyone)
	      List of users who are authorized to flush the queue.

       authorized_mailq_users (static:anyone)
	      List of users who are authorized to view the queue.

FILES
       /var/spool/postfix, mail queue

SEE ALSO
       qmgr(8), queue manager
       showq(8), list mail queue
       flush(8), fast flush service
       sendmail(1), Sendmail-compatible user interface
       postsuper(1), privileged queue operations
       postlogd(8), Postfix logging
       syslogd(8), system logging

README FILES
       Use  "postconf  readme_directory" or "postconf html_directory" to locate
       this information.
       ETRN_README, Postfix ETRN howto

LICENSE
       The Secure Mailer license must be distributed with this software.

HISTORY
       The postqueue command was introduced with Postfix version 1.1.

AUTHOR(S)
       Wietse Venema
       IBM T.J. Watson Research
       P.O. Box 704
       Yorktown Heights, NY 10598, USA

       Wietse Venema
       Google, Inc.
       111 8th Avenue
       New York, NY 10011, USA

								   POSTQUEUE(1)