search..
No manual entry for -- in section 1
PGREP(1)			 User Commands			       PGREP(1)

NAME
       pgrep,  pkill, pidwait - look up, signal, or wait for processes based on
       name and other attributes

SYNOPSIS
       pgrep [options] pattern
       pkill [options] pattern
       pidwait [options] pattern

DESCRIPTION
       pgrep looks through  the	 currently  running  processes	and  lists  the
       process	IDs which match the selection criteria to stdout.  All the cri-
       teria have to match.  For example,

	      $ pgrep -u root sshd

       will only list the processes called sshd AND  owned  by	root.	On  the
       other hand,

	      $ pgrep -u root,daemon

       will list the processes owned by root OR daemon.

       pkill  will  send  the  specified  signal  (by  default SIGTERM) to each
       process instead of listing them on stdout.

       pidwait will wait for each process instead of listing them on stdout.

OPTIONS
       -signal
       --signal signal
	      Defines the signal to send to each matched process.   Either  the
	      numeric or the symbolic signal name can be used. In pgrep or pid-
	      wait  mode only the long option can be used and has no effect un-
	      less used in conjunction	with  --require-handler	 to  filter  to
	      processes	 with a userspace signal handler present for a particu-
	      lar signal.

       -c, --count
	      Suppress	normal	output;	 instead  print	 a  count  of  matching
	      processes.   When	 count	does  not  match anything, e.g. returns
	      zero, the command will return non-zero value. Note that for pkill
	      and pidwait, the count is the number of matching	processes,  not
	      the processes that were successfully signaled or waited for.

       -d, --delimiter delimiter
	      Sets the string used to delimit each process ID in the output (by
	      default a newline).  (pgrep only.)

       -e, --echo
	      Display name and PID of the process being killed.	 (pkill only.)

       -f, --full
	      The  pattern  is	normally only matched against the process name.
	      When -f is set, the full command line is used.

       -g, --pgroup pgrp,...
	      Only match processes in the process group	 IDs  listed.	Process
	      group  0	is  translated	into pgrep's, pkill's, or pidwait's own
	      process group.

       -G, --group gid,...
	      Only match processes whose real group ID is listed.   Either  the
	      numerical or symbolical value may be used.

       -i, --ignore-case
	      Match processes case-insensitively.

       -l, --list-name
	      List the process name as well as the process ID.	(pgrep only.)

       -a, --list-full
	      List  the	 full  command	line as well as the process ID.	 (pgrep
	      only.)

       -n, --newest
	      Select only the newest (most recently started)  of  the  matching
	      processes.

       -o, --oldest
	      Select  only  the oldest (least recently started) of the matching
	      processes.

       -O, --older secs
	      Select processes older than secs.

       -P, --parent ppid,...
	      Only match processes whose parent process ID is listed.

       -s, --session sid,...
	      Only match processes whose process session ID is listed.	Session
	      ID 0 is translated into pgrep's, pkill's, or pidwait's  own  ses-
	      sion ID.

       -t, --terminal term,...
	      Only  match  processes whose controlling terminal is listed.  The
	      terminal name should be specified without the "/dev/" prefix.

       -u, --euid euid,...
	      Only match processes whose effective user ID is  listed.	 Either
	      the numerical or symbolical value may be used.

       -U, --uid uid,...
	      Only  match  processes  whose real user ID is listed.  Either the
	      numerical or symbolical value may be used.

       -v, --inverse
	      Negates the matching.  This option is usually used in pgrep's  or
	      pidwait's	 context.   In pkill's context the short option is dis-
	      abled to avoid accidental usage of the option.

       -w, --lightweight
	      Shows all thread ids instead of pids in pgrep's or pidwait's con-
	      text.  In pkill's context this option is disabled.

       -x, --exact
	      Only match processes whose names (or command lines if -f is spec-
	      ified) exactly match the pattern.

       -F, --pidfile file
	      Read PIDs from file.  This option is more	 useful	 for  pkill  or
	      pidwait than pgrep.

       -L, --logpidfile
	      Fail if pidfile (see -F) not locked.

       -r, --runstates D,R,S,Z,...
	      Match only processes which match the process state.

       -A, --ignore-ancestors
	      Ignore  all  ancestors of pgrep, pkill, or pidwait.  For example,
	      this can be useful when elevating with sudo or similar tools.

       -H, --require-handler
	      Only match processes with a userspace signal handler present  for
	      the signal to be sent.

       --cgroup name,...
	      Match on provided control group (cgroup) v2 name. See cgroups(8)

       --ns pid
	      Match  processes	that belong to the same namespaces. Required to
	      run as root to match processes from other users. See --nslist for
	      how to limit which namespaces to match.

       --nslist name,...
	      Match only the provided namespaces.  Available  namespaces:  ipc,
	      mnt, net, pid, user, uts.

       -q, --queue value
	      Use  sigqueue(3)	rather	than  kill(2) and the value argument is
	      used to specify an integer to be sent with the signal. If the re-
	      ceiving process has installed a handler for this signal using the
	      SA_SIGINFO flag to sigaction(2), then it can obtain this data via
	      the si_value field of the siginfo_t structure.

       -V, --version
	      Display version information and exit.

       -h, --help
	      Display help and exit.

OPERANDS
       pattern
	      Specifies an Extended Regular Expression for matching against the
	      process names or command lines.

EXAMPLES
       Example 1: Find the process ID of the named daemon:

	      $ pgrep -u root named

       Example 2: Make syslog reread its configuration file:

	      $ pkill -HUP syslogd

       Example 3: Give detailed information on all xterm processes:

	      $ ps -fp $(pgrep -d, -x xterm)

       Example 4: Make all chrome processes run nicer:

	      $ renice +4 $(pgrep chrome)

EXIT STATUS
       0      One or more processes matched the criteria. For  pkill  and  pid-
	      wait, one or more processes must also have been successfully sig-
	      nalled or waited for.
       1      No processes matched or none of them could be signalled.
       2      Syntax error in the command line.
       3      Fatal error: out of memory etc.

NOTES
       The  process  name  used	 for  matching	is limited to the 15 characters
       present in the output of /proc/pid/stat.	 Use the  -f  option  to  match
       against	the  complete  command line, /proc/pid/cmdline. Threads may not
       have the same process name as the parent process but will have the  same
       command line.

       The running pgrep, pkill, or pidwait process will never report itself as
       a match.

       The  -O	--older	 option will silently fail if /proc is mounted with the
       subset=pid option.

BUGS
       The options -n and -o and -v can not be combined.  Let me  know	if  you
       need to do this.

       Defunct processes are reported.

       pidwait	requires  the pidfd_open(2) system call which first appeared in
       Linux 5.3.

SEE ALSO
       ps(1), regex(7), signal(7), sigqueue(3), killall(1), skill(1),  kill(1),
       kill(2), cgroups(8).

AUTHOR
       Kjetil Torgrim Homme

REPORTING BUGS
       Please send bug reports to procps@freelists.org

procps-ng			   2023-01-16			       PGREP(1)