search..
No manual entry for -- in section 1
OPENSSL-RSAUTL(1SSL)		    OpenSSL		   OPENSSL-RSAUTL(1SSL)

NAME
       openssl-rsautl - RSA command

SYNOPSIS
       openssl rsautl [-help] [-in file] [-passin arg] [-rev] [-out file]
       [-inkey filename|uri] [-keyform DER|PEM|P12|ENGINE] [-pubin] [-certin]
       [-sign] [-verify] [-encrypt] [-decrypt] [-pkcs] [-x931] [-oaep] [-raw]
       [-hexdump] [-asn1parse] [-engine id] [-rand files] [-writerand file]
       [-provider name] [-provider-path path] [-provparam [name:]key=value]
       [-propquery propq]

DESCRIPTION
       This command has been deprecated.  The openssl-pkeyutl(1) command should
       be used instead.

       This command can be used to sign, verify, encrypt and decrypt data using
       the RSA algorithm.

OPTIONS
       -help
	   Print out a usage message.

       -in filename
	   This	 specifies  the	 input	filename  to read data from or standard
	   input if this option is not specified.

       -passin arg
	   The	 passphrase   used   in	  the	 output	   file.     See    see
	   openssl-passphrase-options(1).

       -rev
	   Reverse the order of the input.

       -out filename
	   Specifies  the  output  filename  to	 write to or standard output by
	   default.

       -inkey filename|uri
	   The input key, by default it should be an RSA private key.

       -keyform DER|PEM|P12|ENGINE
	   The	   key	   format;     unspecified     by     default.	    See
	   openssl-format-options(1) for details.

       -pubin
	   By  default	a  private  key	 is read from the key input.  With this
	   option a public key is read	instead.   If  the  input  contains  no
	   public key but a private key, its public part is used.

       -certin
	   The input is a certificate containing an RSA public key.

       -sign
	   Sign	 the  input data and output the signed result. This requires an
	   RSA private key.

       -verify
	   Verify the input data and output the recovered data.

       -encrypt
	   Encrypt the input data using an RSA public key.

       -decrypt
	   Decrypt the input data using an RSA private key.

       -pkcs, -oaep, -x931, -raw
	   The padding to use: PKCS#1 v1.5 (the	 default),  PKCS#1  OAEP,  ANSI
	   X9.31,  or no padding, respectively.	 For signatures, only -pkcs and
	   -raw can be used.

	   Note:  because  of  protection   against   Bleichenbacher   attacks,
	   decryption  using  PKCS#1  v1.5  mode will not return errors in case
	   padding check failed.  Use  -raw  and  inspect  the	returned  value
	   manually to check if the padding is correct.

       -hexdump
	   Hex dump the output data.

       -asn1parse
	   Parse  the  ASN.1 output data, this is useful when combined with the
	   -verify option.

       -engine id
	   See "Engine Options" in openssl(1).	This option is deprecated.

       -rand files, -writerand file
	   See "Random State Options" in openssl(1) for details.

       -provider name
       -provider-path path
       -provparam [name:]key=value
       -propquery propq
	   See "Provider Options" in openssl(1), provider(7), and property(7).

NOTES
       Since this command uses the RSA algorithm directly, it can only be  used
       to sign or verify small pieces of data.

EXAMPLES
       Examples	 equivalent  to these can be found in the documentation for the
       non-deprecated openssl-pkeyutl(1) command.

       Sign some data using a private key:

	openssl rsautl -sign -in file -inkey key.pem -out sig

       Recover the signed data

	openssl rsautl -verify -in sig -inkey key.pem

       Examine the raw signed data:

	openssl rsautl -verify -in sig -inkey key.pem -raw -hexdump

	0000 - 00 01 ff ff ff ff ff ff-ff ff ff ff ff ff ff ff	 ................
	0010 - ff ff ff ff ff ff ff ff-ff ff ff ff ff ff ff ff	 ................
	0020 - ff ff ff ff ff ff ff ff-ff ff ff ff ff ff ff ff	 ................
	0030 - ff ff ff ff ff ff ff ff-ff ff ff ff ff ff ff ff	 ................
	0040 - ff ff ff ff ff ff ff ff-ff ff ff ff ff ff ff ff	 ................
	0050 - ff ff ff ff ff ff ff ff-ff ff ff ff ff ff ff ff	 ................
	0060 - ff ff ff ff ff ff ff ff-ff ff ff ff ff ff ff ff	 ................
	0070 - ff ff ff ff 00 68 65 6c-6c 6f 20 77 6f 72 6c 64	 .....hello world

       The PKCS#1 block formatting is evident from this. If this was done using
       encrypt and decrypt the block would have been  of  type	2  (the	 second
       byte) and random padding data visible instead of the 0xff bytes.

       It  is  possible	 to  analyse  the  signature of certificates using this
       command in conjunction  with  openssl-asn1parse(1).  Consider  the  self
       signed  example	in  certs/pca-cert.pem. Running openssl-asn1parse(1) as
       follows yields:

	openssl asn1parse -in pca-cert.pem

	   0:d=0  hl=4 l= 742 cons: SEQUENCE
	   4:d=1  hl=4 l= 591 cons:  SEQUENCE
	   8:d=2  hl=2 l=   3 cons:   cont [ 0 ]
	  10:d=3  hl=2 l=   1 prim:    INTEGER		 :02
	  13:d=2  hl=2 l=   1 prim:   INTEGER		:00
	  16:d=2  hl=2 l=  13 cons:   SEQUENCE
	  18:d=3  hl=2 l=   9 prim:    OBJECT		 :md5WithRSAEncryption
	  29:d=3  hl=2 l=   0 prim:    NULL
	  31:d=2  hl=2 l=  92 cons:   SEQUENCE
	  33:d=3  hl=2 l=  11 cons:    SET
	  35:d=4  hl=2 l=   9 cons:	SEQUENCE
	  37:d=5  hl=2 l=   3 prim:	 OBJECT		   :countryName
	  42:d=5  hl=2 l=   2 prim:	 PRINTABLESTRING   :AU
	 ....
	 599:d=1  hl=2 l=  13 cons:  SEQUENCE
	 601:d=2  hl=2 l=   9 prim:   OBJECT		:md5WithRSAEncryption
	 612:d=2  hl=2 l=   0 prim:   NULL
	 614:d=1  hl=3 l= 129 prim:  BIT STRING

       The final BIT STRING contains the actual signature. It can be  extracted
       with:

	openssl asn1parse -in pca-cert.pem -out sig -noout -strparse 614

       The certificate public key can be extracted with:

	openssl x509 -in test/testx509.pem -pubkey -noout >pubkey.pem

       The signature can be analysed with:

	openssl rsautl -in sig -verify -asn1parse -inkey pubkey.pem -pubin

	   0:d=0  hl=2 l=  32 cons: SEQUENCE
	   2:d=1  hl=2 l=  12 cons:  SEQUENCE
	   4:d=2  hl=2 l=   8 prim:   OBJECT		:md5
	  14:d=2  hl=2 l=   0 prim:   NULL
	  16:d=1  hl=2 l=  16 prim:  OCTET STRING
	     0000 - f3 46 9e aa 1a 4a 73 c9-37 ea 93 00 48 25 08 b5   .F...Js.7...H%..

       This  is	 the  parsed version of an ASN1 DigestInfo structure. It can be
       seen that the digest used was md5. The actual part  of  the  certificate
       that was signed can be extracted with:

	openssl asn1parse -in pca-cert.pem -out tbs -noout -strparse 4

       and its digest computed with:

	openssl md5 -c tbs
	MD5(tbs)= f3:46:9e:aa:1a:4a:73:c9:37:ea:93:00:48:25:08:b5

       which it can be seen agrees with the recovered value above.

SEE ALSO
       openssl(1),    openssl-pkeyutl(1),    openssl-dgst(1),	openssl-rsa(1),
       openssl-genrsa(1)

HISTORY
       This command was deprecated in OpenSSL 3.0.

       The -engine option was deprecated in OpenSSL 3.0.

COPYRIGHT
       Copyright 2000-2023 The OpenSSL Project Authors. All Rights Reserved.

       Licensed under the Apache License 2.0 (the "License").  You may not  use
       this  file except in compliance with the License.  You can obtain a copy
       in   the	  file	 LICENSE   in	the   source   distribution    or    at
       <https://www.openssl.org/source/license.html>.

3.5.7				   2026-06-09		   OPENSSL-RSAUTL(1SSL)