search..
No manual entry for -- in section 1
getent(1)		    General Commands Manual		      getent(1)

NAME
       getent - get entries from Name Service Switch libraries

SYNOPSIS
       getent [option]... database key...

DESCRIPTION
       The getent command displays entries from databases supported by the Name
       Service	Switch	libraries,  which are configured in /etc/nsswitch.conf.
       If one or more key arguments are provided, then only  the  entries  that
       match the supplied keys will be displayed.  Otherwise, if no key is pro-
       vided,  all entries will be displayed (unless the database does not sup-
       port enumeration).

       The database may be any of those supported by the GNU C Library,	 listed
       below:

       ahosts When  no	key  is provided, use sethostent(3), gethostent(3), and
	      endhostent(3) to enumerate the hosts database.  This is identical
	      to using hosts(5).  When one or more key arguments are  provided,
	      pass  each  key  in succession to getaddrinfo(3) with the address
	      family AF_UNSPEC, enumerating each socket address	 structure  re-
	      turned.

       ahostsv4
	      Same as ahosts, but use the address family AF_INET.

       ahostsv6
	      Same as ahosts, but use the address family AF_INET6.  The call to
	      getaddrinfo(3) in this case includes the AI_V4MAPPED flag.

       aliases
	      When  no key is provided, use setaliasent(3), getaliasent(3), and
	      endaliasent(3) to enumerate the aliases database.	  When	one  or
	      more  key	 arguments are provided, pass each key in succession to
	      getaliasbyname(3) and display the result.

       ethers When one or more key arguments are provided,  pass  each	key  in
	      succession  to  ether_aton(3) and ether_hostton(3) until a result
	      is obtained, and display the result.   Enumeration  is  not  sup-
	      ported on ethers, so a key must be provided.

       group  When  no	key is provided, use setgrent(3), getgrent(3), and end-
	      grent(3) to enumerate the group database.	 When one or  more  key
	      arguments	 are provided, pass each numeric key to getgrgid(3) and
	      each nonnumeric key to getgrnam(3) and display the result.

       gshadow
	      When no key is provided, use setsgent(3), getsgent(3), and  ends-
	      gent(3)  to enumerate the gshadow database.  When one or more key
	      arguments are provided, pass each key  in	 succession  to	 getsg-
	      nam(3) and display the result.

       hosts  When  no	key  is provided, use sethostent(3), gethostent(3), and
	      endhostent(3) to enumerate the hosts database.  When one or  more
	      key  arguments are provided, pass each key to gethostbyaddr(3) or
	      gethostbyname2(3), depending on whether a	 call  to  inet_pton(3)
	      indicates	 that  the  key	 is an IPv6 or IPv4 address or not, and
	      display the result.

       initgroups
	      When one or more key arguments are provided,  pass  each	key  in
	      succession  to  getgrouplist(3) and display the result.  Enumera-
	      tion is not supported on initgroups, so a key must be provided.

       netgroup
	      When one key is provided, pass the key to setnetgrent(3) and, us-
	      ing getnetgrent(3) display the resulting string triple (hostname,
	      username, domainname).  Alternatively, three  keys  may  be  pro-
	      vided,  which  are interpreted as the hostname, username, and do-
	      mainname to match to a netgroup name via innetgr(3).  Enumeration
	      is not supported on netgroup, so either one or three keys must be
	      provided.

       networks
	      When no key is provided, use setnetent(3), getnetent(3), and end-
	      netent(3) to enumerate the networks database.  When one  or  more
	      key  arguments  are  provided,  pass  each numeric key to getnet-
	      byaddr(3) and each nonnumeric key to getnetbyname(3) and	display
	      the result.

       passwd When  no key is provided, use setpwent(3), getpwent(3), and endp-
	      went(3) to enumerate the passwd database.	 When one or  more  key
	      arguments	 are provided, pass each numeric key to getpwuid(3) and
	      each nonnumeric key to getpwnam(3) and display the result.

       protocols
	      When no key is provided, use setprotoent(3), getprotoent(3),  and
	      endprotoent(3)  to enumerate the protocols database.  When one or
	      more key arguments are provided, pass each numeric key to getpro-
	      tobynumber(3) and each nonnumeric key  to	 getprotobyname(3)  and
	      display the result.

       rpc    When  no key is provided, use setrpcent(3), getrpcent(3), and en-
	      drpcent(3) to enumerate the rpc database.	 When one or  more  key
	      arguments	 are  provided,	 pass  each numeric key to getrpcbynum-
	      ber(3) and each nonnumeric key to getrpcbyname(3) and display the
	      result.

       services
	      When no key is provided, use  setservent(3),  getservent(3),  and
	      endservent(3)  to	 enumerate  the services database.  When one or
	      more key arguments are provided, pass each numeric  key  to  get-
	      servbynumber(3)  and  each nonnumeric key to getservbyname(3) and
	      display the result.

       shadow When no key is provided, use setspent(3), getspent(3),  and  end-
	      spent(3)	to enumerate the shadow database.  When one or more key
	      arguments are provided, pass each key  in	 succession  to	 getsp-
	      nam(3) and display the result.

OPTIONS
       --service service
       -s service
	      Override	all databases with the specified service.  (Since glibc
	      2.2.5.)

       --service database:service
       -s database:service
	      Override only specified databases	 with  the  specified  service.
	      The  option may be used multiple times, but only the last service
	      for each database will be used.  (Since glibc 2.4.)

       --no-idn
       -i     Disables IDN encoding in lookups for ahosts/getaddrinfo(3) (Since
	      glibc-2.13.)

       --help
       -?     Print a usage summary and exit.

       --usage
	      Print a short usage summary and exit.

       --version
       -V     Print the version number, license, and disclaimer of warranty for
	      getent.

EXIT STATUS
       One of the following exit values can be returned by getent:

       0      Command completed successfully.

       1      Missing arguments, or database unknown.

       2      One or more supplied key could not be found in the database.

       3      Enumeration not supported on this database.

SEE ALSO
       nsswitch.conf(5)

Linux man-pages 6.9.1		   2024-05-02			      getent(1)