search..
No manual entry for -- in section 1
dpkg-split(1)			   dpkg suite			  dpkg-split(1)

NAME
       dpkg-split - Debian package archive split/join tool

SYNOPSIS
       dpkg-split [option...] command

DESCRIPTION
       dpkg-split splits Debian binary package files into smaller parts and
       reassembles them again, to support the storage of large package files on
       small media such as floppy disks.

       It can be operated manually using the --split, --join and --info
       options.

       It also has an automatic mode, invoked using the --auto option, where it
       maintains a queue of parts seen but not yet reassembled and reassembles
       a package file when it has seen all of its parts.  The --listq and
       --discard options allow the management of the queue.

       All splitting, joining and queueing operations produce informative
       messages on standard output; these may safely be ignored.

COMMANDS
       -s, --split complete-archive [prefix]
	   Splits a single Debian binary package into several parts.

	   The	parts  are  named  prefix.NofM.deb  where N is the part number,
	   starting at 1, and M is the total number of parts (both in decimal).

	   If no prefix is  supplied  then  the	 complete-archive  filename  is
	   taken, including directory, with any trailing .deb removed.

       -j, --join part...
	   Joins  the  parts  of  a  package  file  together,  reassembling the
	   original file as it was before it was split.

	   The part files given as arguments must be all the parts  of	exactly
	   the same original binary file.  Each part must occur exactly once in
	   the	argument  list,	 though	 the  parts to not need to be listed in
	   order.

	   The parts must of course all have been generated with the same  part
	   size	 specified  at	split  time, which means that they must usually
	   have been generated by the same invocation of dpkg-split --split.

	   The parts' filenames are not significant for the reassembly process.

	   By default the output file is called package_version_arch.deb.

       -I, --info part...
	   Prints information, in  a  human-readable  format,  about  the  part
	   file(s)  specified.	 Arguments  which  are not binary package parts
	   produce a message saying so instead (but still on standard output).

       -a, --auto -o complete-output part
	   Automatically queue parts and reassemble a package if possible.

	   The part specified is examined, and compared with other parts of the
	   same package (if any) in the queue of packages file parts.

	   If all parts of the package	file  of  which	 part  is  a  part  are
	   available  then  the package is reassembled and written to complete-
	   output (which should not usually already exist, though this	is  not
	   an error).

	   If not then the part is copied into the queue and complete-output is
	   not created.

	   If part is not a split binary package part then dpkg-split will exit
	   with	 status	 1; if some other trouble occurs then it will exit with
	   status 2.

	   The --output or -o option must be supplied when using  --auto.   (If
	   this	 were  not  mandatory  the  calling program would not know what
	   output file to expect.)

       -l, --listq
	   Lists the contents of the queue of packages to be reassembled.

	   For each package file of which parts are in	the  queue  the	 output
	   gives the name of the package, the parts in the queue, and the total
	   number of bytes stored in the queue.

       -d, --discard [package...]
	   This	 discards  parts  from	the  queue  of	those  waiting	for the
	   remaining parts of their packages.

	   If no package is specified then the queue is cleared completely;  if
	   any	are  specified	then  only parts of the relevant package(s) are
	   deleted.

       -?, --help
	   Show the usage message and exit.

       --version
	   Show the version and exit.

OPTIONS
       --depotdir directory
	   Specifies an alternative directory for the queue of	parts  awaiting
	   automatic reassembly.  The default is /var/lib/dpkg/parts.

       --admindir directory
	   Set	the administrative directory to directory (since dpkg 1.21.10).
	   This	 is  where  the	 statoverride  file  is	 stored.   Defaults  to
	   <</var/lib/dpkg>> if DPKG_ADMINDIR has not been set.

       --root directory
	   Set the root directory to directory (since dpkg 1.21.10), which sets
	   the	installation  directory to <<directory>> and the administrative
	   directory to <<directory/var/lib/dpkg>> if DPKG_ROOT	 has  not  been
	   set.

       -S, --partsize kibibytes
	   Specifies  the  maximum part size when splitting, in kibibytes (1024
	   bytes).  The default is 450 KiB.

       -o, --output complete-output
	   Specifies the output file name for a reassembly.

	   This overrides the default for a manual reassembly (--join)	and  is
	   mandatory for an automatic queue-or-reassemble (--auto).

       -Q, --npquiet
	   When doing automatic queue-or-reassembly dpkg-split usually prints a
	   message  if	it  is	given a part that is not a binary package part.
	   This option suppresses this message, to allow programs such as  dpkg
	   to  cope  with  both	 split	and  unsplit packages without producing
	   spurious messages.

       --msdos
	   Forces the output  filenames	 generated  by	--split	 to  be	 MSDOS-
	   compatible.

	   This	 mangles the prefix - either the default derived from the input
	   filename or the one	supplied  as  an  argument:  alphanumerics  are
	   lowercased,	plus signs are replaced by x's and all other characters
	   are discarded.

	   The result is then truncated as much as is necessary, and  filenames
	   of the form prefixNofM.deb are generated.

EXIT STATUS
       0   The	requested  split,  merge,  or  other command succeeded.	 --info
	   commands count as successful	 even  if  the	files  are  not	 binary
	   package parts.

       1   Only	 occurs	 with --auto and indicates that the part file was not a
	   binary package part.

       2   Fatal or unrecoverable error due to invalid	command-line  usage,  a
	   file	 that  looked  like  a	package part file but was corrupted, or
	   interactions with the system, such  as  accesses  to	 the  database,
	   memory allocations, etc.

ENVIRONMENT
       DPKG_ROOT
	   If  set and --root option has not been specified, it will be used as
	   the filesystem root directory (since dpkg 1.21.10).

       DPKG_ADMINDIR
	   If set and the --admindir or --root options have not been specified,
	   it will be used as the dpkg data directory (since dpkg 1.21.10).

       DPKG_DEBUG
	   Sets the debug mask (since dpkg 1.21.10) from an octal  value.   The
	   currently  accepted	flags are described in the dpkg --debug option,
	   but not all these flags might have an effect on this program.

       DPKG_COLORS
	   Sets the color mode (since dpkg  1.18.5).   The  currently  accepted
	   values are: auto (default), always and never.

       DPKG_NLS
	   If  set,  it	 will  be  used	 to  decide  whether to activate Native
	   Language Support,  also  known  as  internationalization  (or  i18n)
	   support  (since  dpkg  1.22.7).   The  accepted  values are: 0 and 1
	   (default).

       SOURCE_DATE_EPOCH
	   If set, it will be used as  the  timestamp  (as  seconds  since  the
	   epoch) in the deb-split(5)'s ar(5) container.

	   Since dpkg 1.18.11.

FILES
       /var/lib/dpkg/parts
	   The	default	 queue	directory  for	part  files  awaiting automatic
	   reassembly.

	   The filenames used in this directory are in	a  format  internal  to
	   dpkg-split  and  are unlikely to be useful to other programs, and in
	   any case the filename format should not be relied upon.

SECURITY
       Examining  or  joining  untrusted  split	 package  archives  should   be
       considered  a  security	boundary,  and	any  breakage  of that boundary
       stemming	 from  these  operations  should  be  considered   a   security
       vulnerability.	Performing these operations over untrusted data as root
       is strongly discouraged.

       Auto-accumulating and discarding	 split	package	 parts	are  considered
       privileged   operations	 that	might  allow  root  escalation.	  These
       operations must never be delegated to an untrusted user or  be  done  on
       untrusted packages, as that might allow root access to the system.

       Splitting package archives should only be performed over trusted data.

BUGS
       Full  details of the packages in the queue are impossible to get without
       digging into the queue directory yourself.

       There is no easy way to test whether a file that may be a binary package
       part is one.

SEE ALSO
       deb(5), deb-control(5), dpkg-deb(1), dpkg(1).

1.22.22				   2026-03-06			  dpkg-split(1)