search..
No manual entry for -- in section 1
<standard input>:251: warning: table wider than line length minus indentation
HEXDUMP(1)			 User Commands			     HEXDUMP(1)

NAME
       hexdump - display file contents in hexadecimal, decimal, octal, or ascii

SYNOPSIS
       hexdump options file ...

       hd options file ...

DESCRIPTION
       The hexdump utility is a filter which displays the specified files, or
       standard input if no files are specified, in a user-specified format.

OPTIONS
       Below, the length and offset arguments may be followed by the
       multiplicative suffixes KiB (=1024), MiB (=1024*1024), and so on for
       GiB, TiB, PiB, EiB, ZiB and YiB (the "iB" is optional, e.g., "K" has the
       same meaning as "KiB"), or the suffixes KB (=1000), MB (=1000*1000), and
       so on for GB, TB, PB, EB, ZB and YB.

       -b, --one-byte-octal
	   One-byte octal display. Display the input offset in hexadecimal,
	   followed by sixteen space-separated, three-column, zero-filled bytes
	   of input data, in octal, per line.

       -X, --one-byte-hex
	   One-byte hexadecimal display. Display the input offset in
	   hexadecimal, followed by sixteen space-separated, two-column,
	   zero-filled bytes of input data, in hexadecimal, per line.

       -c, --one-byte-char
	   One-byte character display. Display the input offset in hexadecimal,
	   followed by sixteen space-separated, three-column, space-filled
	   characters of input data per line.

       -C, --canonical
	   Canonical hex+ASCII display. Display the input offset in
	   hexadecimal, followed by sixteen space-separated, two-column,
	   hexadecimal bytes, followed by the same sixteen bytes in %_p format
	   enclosed in | characters. Invoking the program as hd implies this
	   option.

       -d, --two-bytes-decimal
	   Two-byte decimal display. Display the input offset in hexadecimal,
	   followed by eight space-separated, five-column, zero-filled,
	   two-byte units of input data, in unsigned decimal, per line.

       -e, --format format_string
	   Specify a format string to be used for displaying data.

       -f, --format-file file
	   Specify a file that contains one or more newline-separated format
	   strings. Empty lines and lines whose first non-blank character is a
	   hash mark (#) are ignored.

       -L, --color[=when]
	   Accept color units for the output. The optional argument when can be
	   auto, never or always. If the when argument is omitted, it defaults
	   to auto. The colors can be disabled; for the current built-in
	   default see the --help output. See also the Colors subsection and
	   the COLORS section below.

       -n, --length length
	   Interpret only length bytes of input.

       -o, --two-bytes-octal
	   Two-byte octal display. Display the input offset in hexadecimal,
	   followed by eight space-separated, six-column, zero-filled, two-byte
	   quantities of input data, in octal, per line.

       -s, --skip offset
	   Skip offset bytes from the beginning of the input.

       -v, --no-squeezing
	   The -v option causes hexdump to display all input data. Without the
	   -v option, any number of groups of output lines which would be
	   identical to the immediately preceding group of output lines (except
	   for the input offsets), are replaced with a line comprised of a
	   single asterisk.

       -x, --two-bytes-hex
	   Two-byte hexadecimal display. Display the input offset in
	   hexadecimal, followed by eight space-separated, four-column,
	   zero-filled, two-byte quantities of input data, in hexadecimal, per
	   line.

       -h, --help
	   Display help text and exit.

       -V, --version
	   Display version and exit.

       For each input file, hexdump sequentially copies the input to standard
       output, transforming the data according to the format strings specified
       by the -e and -f options, in the order that they were specified.

FORMATS
       A format string contains any number of format units, separated by
       whitespace. A format unit contains up to three items: an iteration
       count, a byte count, and a format.

       The iteration count is an optional positive integer, which defaults to
       one. Each format is applied iteration count times.

       The byte count is an optional positive integer. If specified it defines
       the number of bytes to be interpreted by each iteration of the format.

       If an iteration count and/or a byte count is specified, a single slash
       must be placed after the iteration count and/or before the byte count to
       disambiguate them. Any whitespace before or after the slash is ignored.

       The format is required and must be surrounded by double quote (" ")
       marks. It is interpreted as a fprintf-style format string (see
       fprintf(3)), with the following exceptions:

       1.
	   An asterisk (*) may not be used as a field width or precision.

       2.
	   A byte count or field precision is required for each s conversion
	   character (unlike the fprintf(3) default which prints the entire
	   string if the precision is unspecified).

       3.
	   The conversion characters h, l, n, p, and q are not supported.

       4.
	   The single character escape sequences described in the C standard
	   are supported:
	  +-------------------+----+
	  |		      |	   |
	  | NULL	      | \0 |
	  +-------------------+----+
	  |		      |	   |
	  | <alert character> | \a |
	  +-------------------+----+
	  |		      |	   |
	  | <backspace>	      | \b |
	  +-------------------+----+
	  |		      |	   |
	  | <form-feed>	      | \f |
	  +-------------------+----+
	  |		      |	   |
	  | <newline>	      | \n |
	  +-------------------+----+
	  |		      |	   |
	  | <carriage return> | \r |
	  +-------------------+----+
	  |		      |	   |
	  | <tab>	      | \t |
	  +-------------------+----+
	  |		      |	   |
	  | <vertical tab>    | \v |
	  +-------------------+----+

   Conversion strings
       The hexdump utility also supports the following additional
       conversion strings.

       _a[dox]
	   Display the input offset, cumulative across input files, of
	   the next byte to be displayed. The appended characters d, o,
	   and x specify the display base as decimal, octal or
	   hexadecimal respectively.

       _A[dox]
	   Almost identical to the _a conversion string except that it
	   is only performed once, when all of the input data has been
	   processed.

       _c
	   Output characters in the default character set. Non-printing
	   characters are displayed in three-character, zero-padded
	   octal, except for those representable by standard escape
	   notation (see above), which are displayed as two-character
	   strings.

       _p
	   Output characters in the default character set. Non-printing
	   characters are displayed as a single '.'.

       _u
	   Output US ASCII characters, with the exception that control
	   characters are displayed using the following, lower-case,
	   names. Characters greater than 0xff, hexadecimal, are
	   displayed as hexadecimal strings.
	  +---------+---------+---------+---------+---------+---------+
	  |	    |	      |		|	  |	    |	      |
	  | 000 nul | 001 soh | 002 stx | 003 etx | 004 eot | 005 enq |
	  +---------+---------+---------+---------+---------+---------+
	  |	    |	      |		|	  |	    |	      |
	  | 006 ack | 007 bel | 008 bs	| 009 ht  | 00A lf  | 00B vt  |
	  +---------+---------+---------+---------+---------+---------+
	  |	    |	      |		|	  |	    |	      |
	  | 00C ff  | 00D cr  | 00E so	| 00F si  | 010 dle | 011 dc1 |
	  +---------+---------+---------+---------+---------+---------+
	  |	    |	      |		|	  |	    |	      |
	  | 012 dc2 | 013 dc3 | 014 dc4 | 015 nak | 016 syn | 017 etb |
	  +---------+---------+---------+---------+---------+---------+
	  |	    |	      |		|	  |	    |	      |
	  | 018 can | 019 em  | 01A sub | 01B esc | 01C fs  | 01D gs  |
	  +---------+---------+---------+---------+---------+---------+
	  |	    |	      |		|	  |	    |	      |
	  | 01E rs  | 01F us  | 0FF del |	  |	    |	      |
	  +---------+---------+---------+---------+---------+---------+

   Colors
       When put at the end of a format specifier, hexdump
       highlights the respective string with the color
       specified. Conditions, if present, are evaluated prior
       to highlighting.

       _L[color_unit_1,color_unit_2,...,color_unit_n]

       The full syntax of a color unit is as follows:

       [!]COLOR[:VALUE][@OFFSET_START[-END]]

       !
	   Negate the condition. Please note that it only makes
	   sense to negate a unit if both a value/string and an
	   offset are specified. In that case the respective
	   output string will be highlighted if and only if the
	   value/string does not match the one at the offset.

       COLOR
	   One of the 8 basic shell colors.

       VALUE
	   A value to be matched specified in hexadecimal, or
	   octal base, or as a string. Please note that the
	   usual C escape sequences are not interpreted by
	   hexdump inside the color_units.

       OFFSET
	   An offset or an offset range at which to check for a
	   match. Please note that lone OFFSET_START uses the
	   same value as END offset.

   Counters
       The default and supported byte counts for the conversion
       characters are as follows:

       %_c, %_p, %_u, %c
	   One byte counts only.

       %d, %i, %o, %u, %X, %x
	   Four byte default, one, two and four byte counts
	   supported.

       %E, %e, %f, %G, %g
	   Eight byte default, four byte counts supported.

       The amount of data interpreted by each format string is
       the sum of the data required by each format unit, which
       is the iteration count times the byte count, or the
       iteration count times the number of bytes required by
       the format if the byte count is not specified.

       The input is manipulated in blocks, where a block is
       defined as the largest amount of data specified by any
       format string. Format strings interpreting less than an
       input block's worth of data, whose last format unit both
       interprets some number of bytes and does not have a
       specified iteration count, have the iteration count
       incremented until the entire input block has been
       processed or there is not enough data remaining in the
       block to satisfy the format string.

       If, either as a result of user specification or hexdump
       modifying the iteration count as described above, an
       iteration count is greater than one, no trailing
       whitespace characters are output during the last
       iteration.

       It is an error to specify a byte count as well as
       multiple conversion characters or strings unless all but
       one of the conversion characters or strings is _a or _A.

       If, as a result of the specification of the -n option or
       end-of-file being reached, input data only partially
       satisfies a format string, the input block is
       zero-padded sufficiently to display all available data
       (i.e., any format units overlapping the end of data will
       display some number of the zero bytes).

       Further output by such format strings is replaced by an
       equivalent number of spaces. An equivalent number of
       spaces is defined as the number of spaces output by an s
       conversion character with the same field width and
       precision as the original conversion character or
       conversion string but with any '+', ' ', '#' conversion
       flag characters removed, and referencing a NULL string.

       If no format strings are specified, the default display
       is very similar to the -x output format (the -x option
       causes more space to be used between format units than
       in the default output).

EXIT STATUS
       hexdump exits 0 on success and > 0 if an error occurred.

CONFORMING TO
       The hexdump utility is expected to be IEEE Std 1003.2
       ("POSIX.2") compatible.

EXAMPLES
       Display the input in perusal format:

	      "%06.6_ao "  12/1 "%3_u "
	      "\t" "%_p "
	      "\n"

       Implement the -x option:

	      "%07.7_Ax\n"
	      "%07.7_ax	 " 8/2 "%04x " "\n"

       MBR Boot Signature example: Highlight the addresses cyan
       and the bytes at offsets 510 and 511 green if their
       value is 0xAA55, red otherwise.

	      "%07.7_Ax_L[cyan]\n"
	      "%07.7_ax_L[cyan]	 " 8/2 "   %04x_L[green:0xAA55@510-511,!red:0xAA55@510-511] " "\n"

COLORS
       The output colorization is implemented by
       terminal-colors.d(5) functionality. Implicit coloring
       can be disabled by an empty file

	  /etc/terminal-colors.d/hexdump.disable

       for the hexdump command or for all tools by

	  /etc/terminal-colors.d/disable

       Since version 2.41, the $NO_COLOR environment variable
       is also supported to disable output colorization unless
       explicitly enabled by a command-line option.

       The user-specific $XDG_CONFIG_HOME/terminal-colors.d or
       $HOME/.config/terminal-colors.d overrides the global
       setting.

       Note that the output colorization may be enabled by
       default, and in this case terminal-colors.d directories
       do not have to exist yet.

REPORTING BUGS
       For bug reports, use the issue tracker
       <https://github.com/util-linux/util-linux/issues>.

AVAILABILITY
       The hexdump command is part of the util-linux package
       which can be downloaded from Linux Kernel Archive
       <https://www.kernel.org/pub/linux/utils/util-linux/>.

util-linux 2.41.5		   2026-06-16			     HEXDUMP(1)