Viking I Chipset Configuration File

from: http://corz.org/public/docs/comms/router/ready-made/

"default+FTPd" config file for Viking I chipset based broadband router,
Like the BT Voyager 205.

Upload this to your router via FTP, or use the web interface..

http://192.168.1.1/hag/emweb/bkupRestoreConfigNS.htm

It will reboot immediately.

It may even look like the upload failed. It didn't - your page/ftp
session has hung - the unit is rebooting, just kill that.

When the router comes back up, the new settings will be applied. The
router is now stealthed, with all the tweaks found at the router page..

http://corz.org/network/routers/Voyager/bt.voyager.205_router.how-to.php

There is a DHCP pool of addresses from 192.168.1.50 - 192.168.1.99
available for your guests, or whatever. No USB interface is available.

Port-forwarding has been setup for an FTPd (FTP server)
running at IP 192.168.1.3 ensure that the machine running the FTPd is at
this IP! or else alter the cfg file to suit your needs.

A "passive" range of ports has been configured from 50000 - 50100 inclusive.
You will need to specify this range within your FTPd's preferences. If you run
ProFTPd, you can add this to your <global> section..

PassivePorts 50000 50100

All good FTP servers will allow you to configure a range for the "passive"
connexions, try "Global" preferences first, then rake about!

If you have any problems with this cfg file,
please do let me know!

;o)
(or

⌐ corz.org 2005